Mirrors
/
ARDEN-documentation
mirror of https://github.com/aredn/documentation.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

add tunnel weight description

This commit is contained in:
Steve Lewis AB7PA 2023-09-20 07:44:24 -07:00
parent c420ea612f
commit 68ead868bd
2 changed files with 3 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

BIN
arednGettingStarted/_images/advConfig-maxTunValues.png
View File

Binary file not shown.
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 113 KiB

After

Width:  |  Height:  |  Size: 62 KiB

3
arednGettingStarted/advanced_config.rst
View File

@ -542,6 +542,9 @@ Tunnel Server *maxclients* and Tunnel Client *maxservers*
Use caution when increasing the *maxclients* or *maxservers* values. Enter only *zero* or positive integers up to a maximum value for the number of active connections your node hardware can handle, since each active tunnel connection consumes system resources that the node may need for normal operation. Use caution when increasing the *maxclients* or *maxservers* values. Enter only *zero* or positive integers up to a maximum value for the number of active connections your node hardware can handle, since each active tunnel connection consumes system resources that the node may need for normal operation.
Tunnel Weight
This specifies the OLSR route cost of using a tunnel, with the default value set to ``1``. The higher the route cost weight, the less likely a tunnel will be chosen for routing traffic.
Tunnel WAN Only Setting Tunnel WAN Only Setting
This setting is enabled by default and it prevents tunnel traffic from being routed over the Mesh RF network. It limits tunnels to using the WAN interface, which is typically the intended route. If in your situation you need tunnel traffic to be routed over RF to a node with WAN access, then you can disable this setting to allow that traffic to pass. This setting is enabled by default and it prevents tunnel traffic from being routed over the Mesh RF network. It limits tunnels to using the WAN interface, which is typically the intended route. If in your situation you need tunnel traffic to be routed over RF to a node with WAN access, then you can disable this setting to allow that traffic to pass.