From 1b9a54ffa8c0c30e75419432978c59e1e9ff2fa5 Mon Sep 17 00:00:00 2001 From: Steve Lewis KC0EUW Date: Thu, 23 May 2019 08:33:30 -0700 Subject: [PATCH 1/2] Add GL-iNET debrick link reference Add link to the GL-iNet debrick procedure in case a device becomes unusable and must be reset. --- arednGettingStarted/installing_firmware.rst | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arednGettingStarted/installing_firmware.rst b/arednGettingStarted/installing_firmware.rst index 90c7133..9eb200a 100644 --- a/arednGettingStarted/installing_firmware.rst +++ b/arednGettingStarted/installing_firmware.rst @@ -189,6 +189,9 @@ GL-iNET First Install Process After the GL-iNET device has been booted and configured, navigate to the *Upgrade* section and click *Local Upgrade* to select the AREDN |trade| "sysupgrade.bin" file you downloaded for your device. Be sure to uncheck/deselect the "Keep Settings" checkbox, since GL-iNET settings are incompatible with AREDN. After the device has rebooted to the AREDN |trade| image, you should be able to navigate to ``http://192.168.1.1:8080`` for the firstboot or NOCALL page to appear. +If for some reason your GL-iNET device gets into an unusable state, you should be able to recover using the process documented here: +`GL-iNET debrick procedure `_ + ---------- Once your device is running AREDN |trade| firmware, you can display its web interface by connecting your computer to the LAN port on the :abbr:`PoE (Power over Ethernet)` and navigating to the following URL: ``http://localnode``. Each node will serve its web interface on both port 80 and 8080. From 93b384dc869f8acb586c144951cf887221b56dd7 Mon Sep 17 00:00:00 2001 From: Steve Lewis KC0EUW Date: Thu, 23 May 2019 16:52:40 -0700 Subject: [PATCH 2/2] Fix http error for GL-iNET debrick link --- arednGettingStarted/installing_firmware.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arednGettingStarted/installing_firmware.rst b/arednGettingStarted/installing_firmware.rst index 9eb200a..b473387 100644 --- a/arednGettingStarted/installing_firmware.rst +++ b/arednGettingStarted/installing_firmware.rst @@ -190,7 +190,7 @@ GL-iNET First Install Process After the GL-iNET device has been booted and configured, navigate to the *Upgrade* section and click *Local Upgrade* to select the AREDN |trade| "sysupgrade.bin" file you downloaded for your device. Be sure to uncheck/deselect the "Keep Settings" checkbox, since GL-iNET settings are incompatible with AREDN. After the device has rebooted to the AREDN |trade| image, you should be able to navigate to ``http://192.168.1.1:8080`` for the firstboot or NOCALL page to appear. If for some reason your GL-iNET device gets into an unusable state, you should be able to recover using the process documented here: -`GL-iNET debrick procedure `_ +`GL-iNET debrick procedure `_ ----------