Developed by element14 :<br>
element14 CAD Library consolidation.ulp
at 27/07/2012 14:02:49**>NAME>VALUE>NAME>VALUEMicrocontroller with Programmable Flash<b>FTDI (TM) CHIP</b> Future Technology Devices International Ltd.<p>
http://www.ftdichip.com<b>SSOP-16</b><p>
Auto generated by <i>make-symbol-device-package-bsdl.ulp Rev. 43</i><br>
Source: <a href="http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT230X.pdf"> Data sheet </a>>NAME>VALUE<b>QFN-16 4 x 4 mm</b><p>
Source: <a href="http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT230X.pdf"> Data sheet </a>>NAME>VALUE>NAME>VALUE<b>USB to BASIC UART IC</b><p>
Auto generated by <i>make-symbol-device-package-bsdl.ulp Rev. 43</i><br>
Source: <a href="http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT230X.pdf"> Data sheet </a><b>Resistors, Capacitors, Inductors</b><p>
Based on the previous libraries:
<ul>
<li>r.lbr
<li>cap.lbr
<li>cap-fe.lbr
<li>captant.lbr
<li>polcap.lbr
<li>ipc-smd.lbr
</ul>
All SMD packages are defined according to the IPC specifications and CECC<p>
<author>Created by librarian@cadsoft.de</author><p>
<p>
for Electrolyt Capacitors see also :<p>
www.bccomponents.com <p>
www.panasonic.com<p>
www.kemet.com<p>
http://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf <b>(SANYO)</b>
<p>
for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p>
<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0>
<tr valign="top">
<! <td width="10"> </td>
<td width="90%">
<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b>
<P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>
<TR>
<TD COLSPAN=8>
<FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BI TECH</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT>
</B>
</TD><TD> </TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 >
3005P<BR>
3006P<BR>
3006W<BR>
3006Y<BR>
3009P<BR>
3009W<BR>
3009Y<BR>
3057J<BR>
3057L<BR>
3057P<BR>
3057Y<BR>
3059J<BR>
3059L<BR>
3059P<BR>
3059Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
89P<BR>
89W<BR>
89X<BR>
89PH<BR>
76P<BR>
89XH<BR>
78SLT<BR>
78L ALT<BR>
56P ALT<BR>
78P ALT<BR>
T8S<BR>
78L<BR>
56P<BR>
78P<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
T18/784<BR>
783<BR>
781<BR>
-<BR>
-<BR>
-<BR>
2199<BR>
1697/1897<BR>
1680/1880<BR>
2187<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
8035EKP/CT20/RJ-20P<BR>
-<BR>
RJ-20X<BR>
-<BR>
-<BR>
-<BR>
1211L<BR>
8012EKQ ALT<BR>
8012EKR ALT<BR>
1211P<BR>
8012EKJ<BR>
8012EKL<BR>
8012EKQ<BR>
8012EKR<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
2101P<BR>
2101W<BR>
2101Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
2102L<BR>
2102S<BR>
2102Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVMCOG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
43P<BR>
43W<BR>
43Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
40L<BR>
40P<BR>
40Y<BR>
70Y-T602<BR>
70L<BR>
70P<BR>
70Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
RT/RTR12<BR>
RT/RTR12<BR>
RT/RTR12<BR>
-<BR>
RJ/RJR12<BR>
RJ/RJR12<BR>
RJ/RJR12<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3250L<BR>
3250P<BR>
3250W<BR>
3250X<BR>
3252P<BR>
3252W<BR>
3252X<BR>
3260P<BR>
3260W<BR>
3260X<BR>
3262P<BR>
3262W<BR>
3262X<BR>
3266P<BR>
3266W<BR>
3266X<BR>
3290H<BR>
3290P<BR>
3290W<BR>
3292P<BR>
3292W<BR>
3292X<BR>
3296P<BR>
3296W<BR>
3296X<BR>
3296Y<BR>
3296Z<BR>
3299P<BR>
3299W<BR>
3299X<BR>
3299Y<BR>
3299Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
-<BR>
64W ALT<BR>
-<BR>
64P ALT<BR>
64W ALT<BR>
64X ALT<BR>
64P<BR>
64W<BR>
64X<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66P<BR>
66W<BR>
66X<BR>
67P<BR>
67W<BR>
67X<BR>
67Y<BR>
67Z<BR>
68P<BR>
68W<BR>
68X<BR>
67Y ALT<BR>
67Z ALT<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
5050<BR>
5091<BR>
5080<BR>
5087<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
T63YB<BR>
T63XB<BR>
-<BR>
-<BR>
-<BR>
5887<BR>
5891<BR>
5880<BR>
-<BR>
-<BR>
-<BR>
T93Z<BR>
T93YA<BR>
T93XA<BR>
T93YB<BR>
T93XB<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
8026EKP<BR>
8026EKW<BR>
8026EKM<BR>
8026EKP<BR>
8026EKB<BR>
8026EKM<BR>
1309X<BR>
1309P<BR>
1309W<BR>
8024EKP<BR>
8024EKW<BR>
8024EKN<BR>
RJ-9P/CT9P<BR>
RJ-9W<BR>
RJ-9X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3105P/3106P<BR>
3105W/3106W<BR>
3105X/3106X<BR>
3105Y/3106Y<BR>
3105Z/3105Z<BR>
3102P<BR>
3102W<BR>
3102X<BR>
3102Y<BR>
3102Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMCBG<BR>
EVMCCG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
55-1-X<BR>
55-4-X<BR>
55-3-X<BR>
55-2-X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
50-2-X<BR>
50-4-X<BR>
50-3-X<BR>
-<BR>
-<BR>
-<BR>
64P<BR>
64W<BR>
64X<BR>
64Y<BR>
64Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3323P<BR>
3323S<BR>
3323W<BR>
3329H<BR>
3329P<BR>
3329W<BR>
3339H<BR>
3339P<BR>
3339W<BR>
3352E<BR>
3352H<BR>
3352K<BR>
3352P<BR>
3352T<BR>
3352V<BR>
3352W<BR>
3362H<BR>
3362M<BR>
3362P<BR>
3362R<BR>
3362S<BR>
3362U<BR>
3362W<BR>
3362X<BR>
3386B<BR>
3386C<BR>
3386F<BR>
3386H<BR>
3386K<BR>
3386M<BR>
3386P<BR>
3386S<BR>
3386W<BR>
3386X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
25P<BR>
25S<BR>
25RX<BR>
82P<BR>
82M<BR>
82PA<BR>
-<BR>
-<BR>
-<BR>
91E<BR>
91X<BR>
91T<BR>
91B<BR>
91A<BR>
91V<BR>
91W<BR>
25W<BR>
25V<BR>
25P<BR>
-<BR>
25S<BR>
25U<BR>
25RX<BR>
25X<BR>
72XW<BR>
72XL<BR>
72PM<BR>
72RX<BR>
-<BR>
72PX<BR>
72P<BR>
72RXW<BR>
72RXL<BR>
72X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
T7YB<BR>
T7YA<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
TXD<BR>
TYA<BR>
TYP<BR>
-<BR>
TYD<BR>
TX<BR>
-<BR>
150SX<BR>
100SX<BR>
102T<BR>
101S<BR>
190T<BR>
150TX<BR>
101<BR>
-<BR>
-<BR>
101SX<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ET6P<BR>
ET6S<BR>
ET6X<BR>
RJ-6W/8014EMW<BR>
RJ-6P/8014EMP<BR>
RJ-6X/8014EMX<BR>
TM7W<BR>
TM7P<BR>
TM7X<BR>
-<BR>
8017SMS<BR>
-<BR>
8017SMB<BR>
8017SMA<BR>
-<BR>
-<BR>
CT-6W<BR>
CT-6H<BR>
CT-6P<BR>
CT-6R<BR>
-<BR>
CT-6V<BR>
CT-6X<BR>
-<BR>
-<BR>
8038EKV<BR>
-<BR>
8038EKX<BR>
-<BR>
-<BR>
8038EKP<BR>
8038EKZ<BR>
8038EKW<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
3321H<BR>
3321P<BR>
3321N<BR>
1102H<BR>
1102P<BR>
1102T<BR>
RVA0911V304A<BR>
-<BR>
RVA0911H413A<BR>
RVG0707V100A<BR>
RVA0607V(H)306A<BR>
RVA1214H213A<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3104B<BR>
3104C<BR>
3104F<BR>
3104H<BR>
-<BR>
3104M<BR>
3104P<BR>
3104S<BR>
3104W<BR>
3104X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
EVMQ0G<BR>
EVMQIG<BR>
EVMQ3G<BR>
EVMS0G<BR>
EVMQ0G<BR>
EVMG0G<BR>
-<BR>
-<BR>
-<BR>
EVMK4GA00B<BR>
EVM30GA00B<BR>
EVMK0GA00B<BR>
EVM38GA00B<BR>
EVMB6<BR>
EVLQ0<BR>
-<BR>
EVMMSG<BR>
EVMMBG<BR>
EVMMAG<BR>
-<BR>
-<BR>
EVMMCS<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMM1<BR>
-<BR>
-<BR>
EVMM0<BR>
-<BR>
-<BR>
EVMM3<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
62-3-1<BR>
62-1-2<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67R<BR>
-<BR>
67P<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67X<BR>
63V<BR>
63S<BR>
63M<BR>
-<BR>
-<BR>
63H<BR>
63P<BR>
-<BR>
-<BR>
63X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P> <P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3>
<TR>
<TD COLSPAN=7>
<FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT>
<P>
<FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3224G<BR>
3224J<BR>
3224W<BR>
3269P<BR>
3269W<BR>
3269X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
44G<BR>
44J<BR>
44W<BR>
84P<BR>
84W<BR>
84X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST63Z<BR>
ST63Y<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST5P<BR>
ST5W<BR>
ST5X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3314G<BR>
3314J<BR>
3364A/B<BR>
3364C/D<BR>
3364W/X<BR>
3313G<BR>
3313J<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
23B<BR>
23A<BR>
21X<BR>
21W<BR>
-<BR>
22B<BR>
22A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST5YL/ST53YL<BR>
ST5YJ/5T53YJ<BR>
ST-23A<BR>
ST-22B<BR>
ST-22<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST-4B<BR>
ST-4A<BR>
-<BR>
-<BR>
-<BR>
ST-3B<BR>
ST-3A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVM-6YS<BR>
EVM-1E<BR>
EVM-1G<BR>
EVM-1D<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
G4B<BR>
G4A<BR>
TR04-3S1<BR>
TRG04-2S1<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
DVR-43A<BR>
CVR-42C<BR>
CVR-42A/C<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P>
<FONT SIZE=4 FACE=ARIAL><B>ALT = ALTERNATE</B></FONT>
<P>
<P>
</td>
</tr>
</table><b>RESISTOR</b><p>
type 0204, grid 2.5 mm>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>>NAME>VALUE<b>RESISTOR</b> wave soldering<p>>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b><p>
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf>NAME>VALUE<b>RESISTOR</b> wave soldering<p>
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.10 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.12 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.10 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.12 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
type 0204, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0204, grid 7.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 10 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 12 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 15mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 2.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 7.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0309, grid 10mm>NAME>VALUE<b>RESISTOR</b><p>
type 0309, grid 12.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0309, grid 2.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0411, grid 12.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0411, grid 15 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0411, grid 3.81 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0414, grid 15 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0414, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0617, grid 17.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0617, grid 22.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0617, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0922, grid 22.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0613, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0613, grid 15 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0817, grid 22.5 mm>NAME>VALUE0817<b>RESISTOR</b><p>
type 0817, grid 6.35 mm>NAME>VALUE0817<b>RESISTOR</b><p>
type V234, grid 12.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type V235, grid 17.78 mm>NAME>VALUE<b>RESISTOR</b><p>
type V526-0, grid 2.5 mm>NAME>VALUE<b>CECC Size RC2211</b> Reflow Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC2211</b> Wave Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC3715</b> Reflow Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC3715</b> Wave Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC6123</b> Reflow Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC6123</b> Wave Soldering<p>
source Beyschlag>NAME>VALUE<b>RESISTOR</b><p>
type 0922, grid 7.5 mm>NAME>VALUE0922<b>RESISTOR</b><p>
type RDH, grid 15 mm>NAME>VALUERDH<b>Mini MELF 0102 Axial</b>>NAME>VALUE<b>RESISTOR</b> chip<p>
Source: http://www.vishay.com/docs/20008/dcrcw.pdf>NAME>VALUE<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR52<br>
Source: VISHAY .. vta56.pdf>NAME>VALUE<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR53<br>
Source: VISHAY .. vta56.pdf>NAME>VALUE<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR54<br>
Source: VISHAY .. vta56.pdf>NAME>VALUE<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR55<br>
Source: VISHAY .. vta56.pdf>NAME>VALUE<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR56<br>
Source: VISHAY .. vta56.pdf>NAME>VALUE<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RNC55<br>
Source: VISHAY .. vta56.pdf>NAME>VALUE<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RNC60<br>
Source: VISHAY .. vta56.pdf>NAME>VALUE<b>Package 4527</b><p>
Source: http://www.vishay.com/docs/31059/wsrhigh.pdf>NAME>VALUE<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf>NAME>VALUE<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf>NAME>VALUE<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf>NAME>VALUE<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf>NAME>VALUE<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf>NAME>VALUE<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf>NAME>VALUE<b>CRCW1218 Thick Film, Rectangular Chip Resistors</b><p>
Source: http://www.vishay.com .. dcrcw.pdf>NAME>VALUE<b>Chip Monolithic Ceramic Capacitors</b> Medium Voltage High Capacitance for General Use<p>
Source: http://www.murata.com .. GRM43DR72E224KW01.pdf>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b><p>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.4 x 4.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.5 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 3 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 4 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 5 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 6 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm + 5 mm, outline 2.4 x 7 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 2.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 3.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 4.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 5.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 2.4 x 4.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 2.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 4.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 3 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 5.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 7.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
Horizontal, grid 5 mm, outline 7.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 3.2 x 10.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 4.2 x 10.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 5.2 x 10.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm, outline 4.3 x 13.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm, outline 5.4 x 13.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm, outline 6.4 x 13.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 5.4 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 6.4 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 7.2 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 8.4 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 9.1 x 18.2 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 6.2 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 7.4 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 8.7 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 10.8 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 11.3 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 9.3 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 11.3 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 13.4 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 20.5 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 32.5 mm, outline 13.7 x 37.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 32.5 mm, outline 16.2 x 37.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 32.5 mm, outline 18.2 x 37.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 37.5 mm, outline 19.2 x 41.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 37.5 mm, outline 20.3 x 41.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 3.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 37.5 mm, outline 15.5 x 41.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 6.3 x 10.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 15.4 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 17.3 x 31.6 mm>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0204 reflow solder</b><p>
Metric Code Size 1005>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0603 reflow solder</b><p>
Metric Code Size 1608>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0805 reflow solder</b><p>
Metric Code Size 2012>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p>
Metric Code Size 3216>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1210 reflow solder</b><p>
Metric Code Size 3225>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1812 reflow solder</b><p>
Metric Code Size 4532>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1825 reflow solder</b><p>
Metric Code Size 4564>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 2220 reflow solder</b><p>Metric Code Size 5650>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 2225 reflow solder</b><p>Metric Code Size 5664>NAME>VALUE<b> </b><p>
Source: http://www.vishay.com/docs/10129/hpc0201a.pdf>NAME>VALUESource: http://www.avxcorp.com/docs/catalogs/cx5r.pdf>NAME>VALUE<b>CAPACITOR</b><p>
Source: AVX .. aphvc.pdf>NAME>VALUE<b>CAPACITOR</b><p>
Source: AVX .. aphvc.pdf>NAME>VALUE>NAME>VALUE>NAME>VALUE<B>RESISTOR</B>, European symbol<B>CAPACITOR</B>, European symbolSurface Mount USB Mini-B Connector>NAME>VALUE<b>Mini USB 5-pin thru-mount connector</b>
<p>
4Ucon #18732>NAME>VALUE>NAME>VALUE>NAME>VALUE<p><b>USB Connectors</b></p>
<b>USBMINIB</b> - Surface Mount Female Mini-B USB Connector 4UConnector: 06564</p>
<p>By microbuilder.eu</p>
Thru-hole RA Female Mini-B USB Connector 4UConnector: 18732</p>
<p>By ladyada.net</p><h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUEThis footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place.
You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).
This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace"
to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers.
Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,
if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment
will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins.>NAME>VALUE>NAME>VALUE>NAME>VALUE>Name>Value+-SS>NAME>VALUE>NAME>VALUE>NAME>VALUE>Name>Value+-YB>Value>Name>NAME>VALUE>NAME>VALUE>NAME>VALUE2mm SMD side-entry connector. tDocu layer indicates the actual physical plastic housing. +/- indicate SparkFun standard batteries and wiring.>Name>Value+->Name>Value>NAME>VALUE>NAME>VALUEThis footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place.
You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).
This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace"
to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers.
Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,
if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment
will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins.>NAME>VALUE>NAME>VALUE>NAME>VALUE>Name>Value+->NAME>VALUE>Name>Value+-<H3>JST-2-PTH-KIT</h3>
2-Pin JST, through-hole connector<br>
<br>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.>Name>Value+->Name>Value+->VALUE>NAME>VALUE>NAME<b>Header 4</b>
Standard 4-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208Standard 2-pin 0.1" header. Use with <br>
- straight break away headers ( PRT-00116)<br>
- right angle break away headers (PRT-00553)<br>
- swiss pins (PRT-00743)<br>
- machine pins (PRT-00117)<br>
- female headers (PRT-00115)<br><br>
Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br>
2.54_SCREWTERM for use with PRT-10571.<br><br>
3.5mm Screw Terminal footprints for PRT-08084<br><br>
5mm Screw Terminal footprints for use with PRT-08432<b>Special Devices</b><p>
7-segment displays, switches, heatsinks, crystals, transformers, etc.<p>
<author>Created by librarian@cadsoft.de</author><B>CRYSTAL</B>>VALUE>NAME>NAME>VALUE<B>CRYSTAL</B><h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Plated Through Hole - Long Pad</h3>
<p>Specifications:
<ul><li>Pin count:1</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_01</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:1</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_01</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 2mm</h3>
<p>Specifications:
<ul><li>Pin count:1</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_01</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Long Pad w/ Offset Hole</h3>
<p>Specifications:
<ul><li>Pin count:1</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_01</li>
</ul></p>>NAME>VALUE<h3>Pogo Pin - 0.061"</h3>
<p>Specifications:
<ul><li>Pin count:1</li>
<li>Pin pitch:0.061"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_01</li>
</ul></p>>NAME>VALUE<h3>Pogo Pin Hole - 0.58" </h3>
<p>Specifications:
<ul><li>Pin count:1</li>
<li>Pin pitch:0.58"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_01</li>
</ul></p>>NAME>VALUE<h3>Sew-On Fabric Snap - Female</h3>
Equivalent to size #1/0 snap.
<p>Specifications:
<ul><li>Pin count: 1</li>
<li>Area:8mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_01</li>
</ul></p>>NAME>VALUE<h3>Sew-On Fabric Snap - Male</h3>
Equivalent to size #1/0 snap.
<p>Specifications:
<ul><li>Pin count: 1</li>
<li>Area:8mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_01</li>
</ul></p>>NAME>VALUE<h3>Spring Connector</h3>
<p>Specifications:
<ul><li>Pin count: 1</li>
<li>Area:0.25"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_01</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - No Silk Outline Kit Version</h3>
<p> Mask on only one side to make soldering in kits easier.
<p>Specifications:
<ul><li>Pin count:1</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_01</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:1</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_01</li>
</ul></p>>NAME>VALUE<h3>SMTSO-256-ET Flush Mount Nut</h3>
.165 drill
<br>
Fits 4-40 Screws.
<p>Specifications:
<ul><li>Pin count: 1</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_01</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin Locking Footprint</h3>
Holes are offset 0.005", to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin Locking Footprint with Long Pads</h3>
Holes are offset 0.005", to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -8 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 8</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>SMD -8 Pin Vertical Female</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>SMD -8 Pin Vertical Female</h3>
Alternate pin configuration
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>SMD -8 Pin Vertical Female</h3>
Combined footprint configuration
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>JST Vertical Crimp Connect</h3>
<p>Specifications:
<ul><li>Pin count: 8</li>
<li>Pin pitch:1mm</li>
</ul></p>
<p><a href=”http://www.jst-mfg.com/product/pdf/eng/eSR.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>SMD -8 Pin Vertical Male</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin No Silk</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin Locking Footprint No Silk</h3>
Holes are offset 0.005", to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin Locking Female Headers</h3>
Holes are offset 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://cdn.sparkfun.com/datasheets/Prototyping/SP-140520-XX-001.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole Right Angle</h3>
tPlace shows angle of connector.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>SMD - 6 Pin Right Angle Male Header</h3>
tDocu layer shows pin locations.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin with Locking Footprint</h3>
Holes are offset 0.005" from center, locking pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin with Locking Footprint with Long Pads</h3>
Holes are offset 0.005" from center, locking pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole Locking Footprint</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole Right Angle Locking Footprint</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
tPlace shows location of connector.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin Locking Header</h3>
Includes silk outline for 6 pin female header
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://cdn.sparkfun.com/datasheets/Prototyping/SP-140520-XX-001.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin with Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -6 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 6</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Header - 6 pin Female SMD</h3>
Right angle 0.1"
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/19686.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin Holes</h3>
No silk, no plating
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p><h3> 6 Pin SMD Female Header</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin SMD Female Header</h3>
Alternate pin configuration
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin SMD Female Header - Combined Footprint</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin SMD Male Header</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>JST SH Vertical 6-Pin Connector -SMD</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:1mm</li>
<p><b><a href="https://www.sparkfun.com/datasheets/GPS/EM406-SMDConnector-eSH.pdf">Datasheet referenced for footprint</a></b></p>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
<li>EM-406</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:1.27mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -9 Pin</h3>
<p>Specifications:
<ul><li>Pin count:9</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_09</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -9 Pin Locking Footprint</h3>
Holes are offset 0.005" to lock pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:9</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_09</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -9 Pin Locking Footprint w/ Long Pads</h3>
Holes are offset 0.005" to lock pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:9</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_09</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -9 Pin Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:9</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_09</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -9 Pin No Silk</h3>
<p>Specifications:
<ul><li>Pin count:9</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_09</li>
</ul></p>>NAME>VALUE<h3>TRRS 3.5MM Right Angle Stereo Jack - SMT</h3>
<p>Specifications:
<ul><li>Pin count: 4</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/20153.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>AUDIO_JACK_TRRS</li>
</ul></p>>NAME>VALUE<h3>microSD Socket SMD</h3>
Puhs-Push type.
<br> tDocu shows location of uSD card in different positions.
<p>Specifications:
<ul><li>Pin count:12</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/15882.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>MICRO-SD_CARD_SOCKET</li>
</ul></p>>Name>ValuePressedLockedUnlocked<h3>Plated Through Hole - 4 Pin</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Molex 4-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -4 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch: 1.27mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin Locking Footprint</h3>
Pins are offset 0.005" from center to lock pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin Long Pads w/ Locking Footprint</h3>
Holes are offset 0.005" from center to lock pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Molex 4-Pin Plated Through-Hole Locking</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>SMD - 4 Pin Right Angle Male Header</h3>
tDocu layer shows pin locations.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>JST Right Angle 4 Pin Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>+-SS>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -4 Pin PTH Locking</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>SMD- 4 Pin Right Angle </h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>SMD - 4 Pin Vertical Connector</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>SMD Pad count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>SMD - 4 Pin w/ Long Solder Pads</h3>
No silk, but tDocu layer shows pin position.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p><h3>JST Vertical 4 Pin Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href="http://www.jst-mfg.com/product/pdf/eng/ePH.pdf">Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>+-YB>NAME>VALUE<h3>SMD - 4 Pin Right-Angle Female Header</h3>
Silk outline shows header location.
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUEPlated Through Hole - Long Pad
Specifications:
Pin count:1
Pin pitch:0.1"
Example device(s):
CONN_01
Plated Through Hole
Specifications:
Pin count:1
Pin pitch:0.1"
Example device(s):
CONN_01
Plated Through Hole - 2mm
Specifications:
Pin count:1
Example device(s):
CONN_01
Plated Through Hole - Long Pad w/ Offset Hole
Specifications:
Pin count:1
Example device(s):
CONN_01
Pogo Pin - 0.061"
Specifications:
Pin count:1
Pin pitch:0.061"
Example device(s):
CONN_01
Pogo Pin Hole - 0.58"
Specifications:
Pin count:1
Pin pitch:0.58"
Example device(s):
CONN_01
Sew-On Fabric Snap - Female
Equivalent to size #1/0 snap.
Specifications:
Pin count: 1
Area:8mm
Example device(s):
CONN_01
Sew-On Fabric Snap - Male
Equivalent to size #1/0 snap.
Specifications:
Pin count: 1
Area:8mm
Example device(s):
CONN_01
Spring Connector
Specifications:
Pin count: 1
Area:0.25"
Example device(s):
CONN_01
Plated Through Hole - No Silk Outline Kit Version
Mask on only one side to make soldering in kits easier.
Specifications:
Pin count:1
Pin pitch:0.1"
Example device(s):
CONN_01
Plated Through Hole - No Silk Outline
Specifications:
Pin count:1
Pin pitch:0.1"
Example device(s):
CONN_01
SMTSO-256-ET Flush Mount Nut
.165 drill
Fits 4-40 Screws.
Specifications:
Pin count: 1
Example device(s):
CONN_01
Plated Through Hole -8 Pin
Specifications:
Pin count:8
Pin pitch:0.1"
Example device(s):
CONN_08
Plated Through Hole -8 Pin Locking Footprint
Holes are offset 0.005", to hold pins in place during soldering.
Specifications:
Pin count:8
Pin pitch:0.1"
Example device(s):
CONN_08
Plated Through Hole -8 Pin Locking Footprint with Long Pads
Holes are offset 0.005", to hold pins in place during soldering.
Specifications:
Pin count:8
Pin pitch:0.1"
Example device(s):
CONN_08
Plated Through Hole -8 Pin Long Pads
Specifications:
Pin count:8
Pin pitch:0.1"
Example device(s):
CONN_08
Screw Terminal 3.5mm Pitch -8 Pin PTH
Specifications:
Pin count: 8
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_08
SMD -8 Pin Vertical Female
Specifications:
Pin count:8
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_08
SMD -8 Pin Vertical Female
Alternate pin configuration
Specifications:
Pin count:8
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_08
SMD -8 Pin Vertical Female
Combined footprint configuration
Specifications:
Pin count:8
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_08
JST Vertical Crimp Connect
Specifications:
Pin count: 8
Pin pitch:1mm
Datasheet referenced for footprint
Example device(s):
CONN_08
SMD -8 Pin Vertical Male
Specifications:
Pin count:8
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_08
Plated Through Hole -8 Pin No Silk
Specifications:
Pin count:8
Pin pitch:0.1"
Example device(s):
CONN_08
Plated Through Hole -8 Pin Locking Footprint No Silk
Holes are offset 0.005", to hold pins in place during soldering.
Specifications:
Pin count:8
Pin pitch:0.1"
Example device(s):
CONN_08
Plated Through Hole -8 Pin Locking Female Headers
Holes are offset 0.005" to hold pins in place during soldering.
Specifications:
Pin count:8
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_08
Plated Through Hole - 6 Pin
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole Right Angle
tPlace shows angle of connector.
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
SMD - 6 Pin Right Angle Male Header
tDocu layer shows pin locations.
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Plated Through Hole - 6 Pin with Locking Footprint
Holes are offset 0.005" from center, locking pins in place during soldering.
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Plated Through Hole - 6 Pin with Locking Footprint with Long Pads
Holes are offset 0.005" from center, locking pins in place during soldering.
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole Locking Footprint
Holes are offset 0.005" from center to hold pins in place during soldering.
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole Right Angle Locking Footprint
Holes are offset 0.005" from center to hold pins in place during soldering.
tPlace shows location of connector.
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
Plated Through Hole - 6 Pin Locking Header
Includes silk outline for 6 pin female header
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
Plated Through Hole - 6 Pin with Long Pads
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Screw Terminal 3.5mm Pitch -6 Pin PTH
Specifications:
Pin count: 6
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_06
Header - 6 pin Female SMD
Right angle 0.1"
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin Holes
No silk, no plating
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
6 Pin SMD Female Header
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin SMD Female Header
Alternate pin configuration
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin SMD Female Header - Combined Footprint
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin SMD Male Header
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
JST SH Vertical 6-Pin Connector -SMD
Specifications:
Pin count:6
Pin pitch:1mm
Datasheet referenced for footprint
Example device(s):
CONN_06
EM-406
Plated Through Hole - 6 Pin No Silk Outline
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Plated Through Hole - 6 Pin
Specifications:
Pin count:6
Pin pitch:1.27mm
Example device(s):
CONN_06
Plated Through Hole -9 Pin
Specifications:
Pin count:9
Pin pitch:0.1"
Example device(s):
CONN_09
Plated Through Hole -9 Pin Locking Footprint
Holes are offset 0.005" to lock pins in place during soldering.
Specifications:
Pin count:9
Pin pitch:0.1"
Example device(s):
CONN_09
Plated Through Hole -9 Pin Locking Footprint w/ Long Pads
Holes are offset 0.005" to lock pins in place during soldering.
Specifications:
Pin count:9
Pin pitch:0.1"
Example device(s):
CONN_09
Plated Through Hole -9 Pin Long Pads
Specifications:
Pin count:9
Pin pitch:0.1"
Example device(s):
CONN_09
Plated Through Hole -9 Pin No Silk
Specifications:
Pin count:9
Pin pitch:0.1"
Example device(s):
CONN_09
TRRS 3.5MM Right Angle Stereo Jack - SMT
Specifications:
Pin count: 4
Datasheet referenced for footprint
Example device(s):
AUDIO_JACK_TRRS
microSD Socket SMD
Puhs-Push type.
tDocu shows location of uSD card in different positions.
Specifications:
Pin count:12
Datasheet referenced for footprint
Example device(s):
MICRO-SD_CARD_SOCKET
Plated Through Hole - 4 Pin
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
Molex 4-Pin Plated Through-Hole
Specifications:
Pin count:4
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_04
Screw Terminal 3.5mm Pitch -4 Pin PTH
Specifications:
Pin count: 4
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_04
Plated Through Hole - 4 Pin
Specifications:
Pin count:4
Pin pitch: 1.27mm
Example device(s):
CONN_04
Plated Through Hole - 4 Pin Locking Footprint
Pins are offset 0.005" from center to lock pins in place during soldering.
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
Plated Through Hole - 4 Pin Long Pads w/ Locking Footprint
Holes are offset 0.005" from center to lock pins in place during soldering.
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
Molex 4-Pin Plated Through-Hole Locking
Holes are offset 0.005" from center to hold pins in place during soldering.
Specifications:
Pin count:4
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_04
SMD - 4 Pin Right Angle Male Header
tDocu layer shows pin locations.
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
Plated Through Hole - 4 Pin Long Pads
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
Plated Through Hole - 4 Pin No Silk Outline
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
JST Right Angle 4 Pin Plated Through Hole
Specifications:
Pin count: 4
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_04
Screw Terminal 3.5mm Pitch -4 Pin PTH Locking
Holes are offset 0.005" from center to hold pins in place during soldering.
Specifications:
Pin count: 4
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_04
SMD- 4 Pin Right Angle
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
SMD - 4 Pin Vertical Connector
Specifications:
Pin count:4
SMD Pad count:8
Pin pitch:0.1"
Example device(s):
CONN_04
SMD - 4 Pin w/ Long Solder Pads
No silk, but tDocu layer shows pin position.
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
JST Vertical 4 Pin Plated Through Hole
Specifications:
Pin count: 4
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_04
SMD - 4 Pin Right-Angle Female Header
Silk outline shows header location.
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
<h3>1 Pin Connection</h3>>VALUE>NAME<h3> 8 Pin Connection</h3>>VALUE>NAME<h3>6 Pin Connection</h3>>VALUE>NAME<h3> 9 Pin Connection</h3>>VALUE>NAME<h3> Audio Jack </h3>
<p> Audio Jack with TRRS</p>>NAME>VALUENewer version of USDCARD symbol that moves pins for easier routing and uses more accurate pin names.<br />
Renamed DAT2 from NC to RSV to remove the implication that you should leave it not connected.>NAME>VALUE<h3>4 Pin Connection</h3>>VALUE>NAME<h3>Single connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<p></p>
On any of the 0.1 inch spaced packages, you can populate with these:
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
<p></p>
</ul>
<p></p>
This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p>
SMTSO-256-ET is a "flush mount" nut for a 4-40 screw. We mostly use this on specialty testbeds; it is a nice way to connect hardware to your PCB at an adjustable hieght.
<p></p>
Also note, the SNAP packages are for using a snappable style connector. We sell a baggie of snaps and they are also used on two LilyPad designs:
<ul>
<li><a href="https://www.sparkfun.com/products/11347"> Snap Assortment - 30 pack (male and female)</a> (DEV-11347)</li>
<li><a href="https://www.sparkfun.com/products/10941">LilyPad Arduino SimpleSnap</a> (DEV-10941)</li>
<li><a href="https://www.sparkfun.com/products/10940"> LilyPad SimpleSnap Protoboard</a> (DEV-10940)</li>
<p></p>
</ul><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
<li><a href="https://www.sparkfun.com/products/9279"> Arduino Stackable Header - 8 Pin</a> (PRT-09279)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208
<p></p>
NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS...
This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side.<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
<li><a href="https://www.sparkfun.com/products/9280"> Arduino Stackable Header - 6 Pin</a> (PRT-09280)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208
<p></p>
NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS...
This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side.<h3>Audio Jack - 3.5mm TRRS (SMD)</h3>
<p>This is a 3.5mm TRRS SMD audio jack.
<br>TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards.
<br>TRRS stands for “tip, ring, ring, sleeve,” which reflects that this has three conductors and a ground. </p>
<p><b>SparkFun Products:</b>
<ul><li><a href=”https://www.sparkfun.com/products/12639”>Audio Jack</a></li>
<li><a href="https://www.sparkfun.com/products/12968">mbed Starter Kit</a></li>
<li><a href=”https://www.sparkfun.com/products/11570>SparkFun TRRS 3.5mm Jack Breakout</a></li>
</ul></p><h3>microSD Socket for Transflash</h3>
<p>Push-push type µSD socket. tDoc lines correctly indicate media card edge positions when inserting (unlocked, locked, depressed).
<br>
<br><b>NOTE:</b> CD1 and CD2 are connected internally, and the default detect state of the socket is detect pin to ground.</p>
<p><b>SparkFun Products:</b>
<ul><li><a href=”https://www.sparkfun.com/products/13660”>WAV Trigger</a></li>
<li><a href=”https://www.sparkfun.com/products/13262”>CAN-Bus Shield</a></li>
<li><a href=”https://www.sparkfun.com/products/13743”>SparkFun Level Shifing microSD Breakout</a></li>
</ul></p><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208**>Name**>Name**>Name>Name>Value<b>https://componentsearchengine.com</b><p>
<author>Created by SamacSys</author><b>D (R-PDSO-G8)</b><br>
>NAME>VALUE>NAME>VALUE<b>Micropower, 200 mA Ultra Low-Dropout Fixed or Adjustable Voltage Regulator</b><p>
Source: <a href="http://www.ti.com/lit/ds/symlink/lp2986.pdf"> Datasheet </a><b>CHICAGO MINIATURE LAMP, INC.</b><p>
7022X Series SMT LEDs 1206 Package Size>NAME>VALUE<B>LED</B><p>
5 mm, square, Siemens>NAME>VALUE<B>LED</B><p>
2 x 5 mm, rectangle>NAME>VALUE<B>LED</B><p>
3 mm, round>NAME>VALUE<B>LED</B><p>
5 mm, round>NAME>VALUE<B>LED</B><p>
1 mm, round, Siemens>NAME>VALUE<B>LED BLOCK</B><p>
1 LED, Siemens>NAME>VALUE<b>LED HOLDER</b><p>
Siemens>NAME>VALUE<b>LED HOLDER</b><p>
Siemens>NAME>VALUE<b>LED HOLDER</b><p>
SiemensA+K->NAME>VALUE<b>LED HOLDER</b><p>
Siemens>NAME>VALUE+-<B>IR LED</B><p>
infrared emitting diode, Infineon
TO-18, lead spacing 2.54 mm, cathode marking<p>
Inifineon>NAME>VALUE<B>IR LED</B><p>
infrared emitting diode, Infineon
TO-18, lead spacing 2.54 mm, cathode marking<p>
Inifineon>NAME>VALUE<B>LED</B><p>
rectangle, 5.7 x 3.2 mm>NAME>VALUE<B>IR LED</B><p>
IR transmitter Siemens>NAME>VALUE<b>TOPLED® High-optical Power LED (HOP)</b><p>
Source: http://www.osram.convergy.de/ ... ls_t675.pdf>NAME>VALUEAC<b>BLUE LINETM Hyper Mini TOPLED® Hyper-Bright LED</b><p>
Source: http://www.osram.convergy.de/ ... LB M676.pdfAC>NAME>VALUE<b>Super SIDELED® High-Current LED</b><p>
LG A672, LP A672 <br>
Source: http://www.osram.convergy.de/ ... LG_LP_A672.pdf (2004.05.13)CA>NAME>VALUE<b>SmartLEDTM Hyper-Bright LED</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY L896.pdf>NAME>VALUE<b>Hyper TOPLED® RG Hyper-Bright LED</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY T776.pdf>NAME>VALUEAC<b>Hyper Micro SIDELED®</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY Y876.pdf>NAME>VALUE<b>Power TOPLED®</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf>NAME>VALUECACC<b>Hyper CHIPLED Hyper-Bright LED</b><p>
LB Q993<br>
Source: http://www.osram.convergy.de/ ... Lb_q993.pdf>NAME>VALUE<b>Hyper CHIPLED Hyper-Bright LED</b><p>
LB R99A<br>
Source: http://www.osram.convergy.de/ ... lb_r99a.pdf>NAME>VALUE+<b>Mini TOPLED Santana®</b><p>
Source: http://www.osram.convergy.de/ ... LG M470.pdf>NAME>VALUE<b>CHIPLED</b><p>
Source: http://www.osram.convergy.de/ ... LG_R971.pdf>NAME>VALUE<b>CHIPLED</b><p>
Source: http://www.osram.convergy.de/ ... LG_LY N971.pdf>NAME>VALUE<b>CHIPLED</b><p>
Source: http://www.osram.convergy.de/ ... LG_LY Q971.pdf>NAME>VALUE<b>CHIPLED-0603</b><p>
Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603<br>
Package able to withstand TTW-soldering heat<br>
Package suitable for TTW-soldering<br>
Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf>NAME>VALUE<b>SmartLED TTW</b><p>
Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603<br>
Package able to withstand TTW-soldering heat<br>
Package suitable for TTW-soldering<br>
Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf>NAME>VALUE>NAME>VALUEAK>NAME>VALUE<b>LED</b><p>
<u>OSRAM</u>:<br>
- <u>CHIPLED</u><br>
LG R971, LG N971, LY N971, LG Q971, LY Q971, LO R971, LY R971
LH N974, LH R974<br>
LS Q976, LO Q976, LY Q976<br>
LO Q996<br>
- <u>Hyper CHIPLED</u><br>
LW Q18S<br>
LB Q993, LB Q99A, LB R99A<br>
- <u>SideLED</u><br>
LS A670, LO A670, LY A670, LG A670, LP A670<br>
LB A673, LV A673, LT A673, LW A673<br>
LH A674<br>
LY A675<br>
LS A676, LA A676, LO A676, LY A676, LW A676<br>
LS A679, LY A679, LG A679<br>
- <u>Hyper Micro SIDELED®</u><br>
LS Y876, LA Y876, LO Y876, LY Y876<br>
LT Y87S<br>
- <u>SmartLED</u><br>
LW L88C, LW L88S<br>
LB L89C, LB L89S, LG L890<br>
LS L89K, LO L89K, LY L89K<br>
LS L896, LA L896, LO L896, LY L896<br>
- <u>TOPLED</u><br>
LS T670, LO T670, LY T670, LG T670, LP T670<br>
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670<br>
LG T671, LOG T671, LSG T671<br>
LB T673, LV T673, LT T673, LW T673<br>
LH T674<br>
LS T676, LA T676, LO T676, LY T676, LB T676, LH T676, LSB T676, LW T676<br>
LB T67C, LV T67C, LT T67C, LS T67K, LO T67K, LY T67K, LW E67C<br>
LS E67B, LA E67B, LO E67B, LY E67B, LB E67C, LV E67C, LT E67C<br>
LW T67C<br>
LS T679, LY T679, LG T679<br>
LS T770, LO T770, LY T770, LG T770, LP T770<br>
LB T773, LV T773, LT T773, LW T773<br>
LH T774<br>
LS E675, LA E675, LY E675, LS T675<br>
LS T776, LA T776, LO T776, LY T776, LB T776<br>
LHGB T686<br>
LT T68C, LB T68C<br>
- <u>Hyper Mini TOPLED®</u><br>
LB M676<br>
- <u>Mini TOPLED Santana®</u><br>
LG M470<br>
LS M47K, LO M47K, LY M47K<br>
<p>
Source: http://www.osram.convergy.de/<b>https://componentsearchengine.com</b><p>
<author>Created by SamacSys</author><b>D(R-PDSO-G16)</b><br>
>NAME>VALUE>NAME>VALUE<b>CD74HC4050MG4, Hex Buffer, Converter, HC, Non-Inverting 2 to 6V 16-Pin SOIC</b><p>
Source: <a href="http://www.ti.com/lit/ds/symlink/cd74hc4050.pdf"> Datasheet </a>>Name>Name>Name>Name>Value<b>Mounting Holes and Pads</b><p>
<author>Created by librarian@cadsoft.de</author><b>MOUNTING HOLE</b> 2.8 mm with drill center<b>MOUNTING HOLE</b> 3.0 mm with drill center3,0<b>MOUNTING HOLE</b> 3.3 mm with drill center<b>MOUNTING HOLE</b> 3.6 mm with drill center<b>MOUNTING HOLE</b> 4.1 mm with drill center<b>MOUNTING HOLE</b> 4.5 mm with drill center4,5<b>MOUNTING HOLE</b> 5.0 mm with drill center5,0<b>MOUNTING HOLE</b> 3.2 mm with drill center<b>MOUNTING HOLE</b> 4.3 mm with drill center<b>MOUNTING HOLE</b> 5.5 mm with drill centerMOUNTING HOLE 2.8 mm with drill centerMOUNTING HOLE 3.0 mm with drill centerMOUNTING HOLE 3.3 mm with drill centerMOUNTING HOLE 3.6 mm with drill centerMOUNTING HOLE 4.1 mm with drill centerMOUNTING HOLE 4.5 mm with drill centerMOUNTING HOLE 5.0 mm with drill centerMOUNTING HOLE 3.2 mm with drill centerMOUNTING HOLE 4.3 mm with drill centerMOUNTING HOLE 5.5 mm with drill center>NAME>VALUE<b>MOUNTING HOLE</b> with drill center marker<b>SOT-23 Smaller</b>>NAME>VALUE<b>TO 200 vertical</b>>NAME>VALUE123<b>SOT-23</b>>NAME>VALUE<b>SOT23</b> - Wave soldering>NAME>VALUE>NAME>VALUEDSG<b>N-Channel Mosfet</b>
<ul>
<li>2N7002E - 60V 260mA SOT23 [Digikey: 2N7002ET1GOSTR-ND] - <b>REEL</b></li>
<li>BSH103 - 30V 850mA SOT23 [Digikey: 568-5013-1-ND]</li>
</ul>
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.