#ifndef HW_AFSK_H
#define HW_AFSK_H

#include "cfg/cfg_arch.h"

#include <avr/io.h>

struct Afsk;
void hw_afsk_adcInit(int ch, struct Afsk *_ctx);
void hw_afsk_dacInit(int ch, struct Afsk *_ctx);

/**
 * Initialize the specified channel of the ADC for AFSK needs.
 * The adc should be configured to have a continuos stream of convertions.
 * For every convertion there must be an ISR that read the sample
 * and call afsk_adc_isr(), passing the context and the sample.
 *
 * \param ch channel to be used for AFSK demodulation.
 * \param ctx AFSK context (\see Afsk). This parameter must be saved and
 *            passed back to afsk_adc_isr() for every convertion.
 */

/*
 * This macro will be called for AFSK initialization. We could implement everything here as a macro,
 * but since initialization is rather complicated we decided to split its own function. Such function
 * is defined in hw_afsk.c.
 * Remember: since this .c file is not created by the wizard, you must add it to your_project_name.mk.
 * If you create the file using BeRTOS SDK, it will be added for you.
 */
#define AFSK_ADC_INIT(ch, ctx) hw_afsk_adcInit(ch, ctx)

/*
 * Activate strobe pin. We use it for debugging purposes. If you don't use it, simply
 * leave empty the following macros
 */
#define AFSK_STROBE_INIT() do { DDRB |= BV(5); } while (0)

/*
 * Set the pin high. This macro is called at the beginning of the interrupt routine
 */
#define AFSK_STROBE_ON()   do { PORTB |= BV(5); } while (0)

/*
 * Set the pin low. This macro is called at the end of the interrupt routine
 */
#define AFSK_STROBE_OFF()  do { PORTB &= ~BV(5); } while (0)

/**
 * Initialize the specified channel of the DAC for AFSK needs.
 * The DAC has to be configured in order to call an ISR for every sample sent.
 * The DAC doesn't have to start the IRQ immediatly but have to wait
 * the AFSK driver to call AFSK_DAC_IRQ_START().
 * The ISR must then call afsk_dac_isr() passing the AFSK context.
 * \param ch DAC channel to be used for AFSK modulation.
 * \param ctx AFSK context (\see Afsk).  This parameter must be saved and
 *             passed back to afsk_dac_isr() for every convertion.
 */
#define AFSK_DAC_INIT(ch, ctx)   do { (void)ch, (void)ctx; DDRD |= 0xF0; DDRB |= BV(3); } while (0)

/**
 * Start DAC convertions on channel \a ch.
 * \param ch DAC channel.
 */
#define AFSK_DAC_IRQ_START(ch)   do { (void)ch; extern bool hw_afsk_dac_isr; PORTB |= BV(3); hw_afsk_dac_isr = true; } while (0)

/**
 * Stop DAC convertions on channel \a ch.
 * \param ch DAC channel.
 */
#define AFSK_DAC_IRQ_STOP(ch)    do { (void)ch; extern bool hw_afsk_dac_isr; PORTB &= ~BV(3); hw_afsk_dac_isr = false; } while (0)

#endif /* HW_AFSK_H */