RNode_Firmware/Config.h

124 lines
2.8 KiB
C
Raw Normal View History

#include "ROM.h"
2018-04-05 10:10:42 -06:00
#ifndef CONFIG_H
#define CONFIG_H
#define MAJ_VERS 0x01
2019-01-06 04:55:08 -07:00
#define MIN_VERS 0x0A
2018-06-18 14:30:24 -06:00
#define MCU_328P 0x90
2018-04-05 10:10:42 -06:00
#define MCU_1284P 0x91
2018-06-20 09:45:22 -06:00
#define MODE_HOST 0x11
#define MODE_TNC 0x12
2018-04-05 10:10:42 -06:00
#if defined(__AVR_ATmega328P__)
#define MCU_VARIANT MCU_328P
#warning "Firmware is being compiled for atmega328p based boards"
#elif defined(__AVR_ATmega1284P__)
#define MCU_VARIANT MCU_1284P
#warning "Firmware is being compiled for atmega1284p based boards"
#else
#error "The firmware cannot be compiled for the selected MCU variant"
#endif
#define MTU 500
#define SINGLE_MTU 255
#define HEADER_L 1
#define CMD_L 4
// MCU dependent configuration parameters
#if MCU_VARIANT == MCU_328P
const int pin_cs = 7;
const int pin_reset = 6;
const int pin_dio = 2;
const int pin_led_rx = 5;
const int pin_led_tx = 4;
2018-04-26 02:34:39 -06:00
#define FLOW_CONTROL_ENABLED true
#define QUEUE_SIZE 0
#define EEPROM_SIZE 512
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
2018-04-05 10:10:42 -06:00
#endif
#if MCU_VARIANT == MCU_1284P
const int pin_cs = 4;
const int pin_reset = 3;
const int pin_dio = 2;
const int pin_led_rx = 12;
const int pin_led_tx = 13;
2018-04-26 02:34:39 -06:00
#define FLOW_CONTROL_ENABLED true
#define QUEUE_SIZE 24
2018-06-27 02:22:44 -06:00
#define QUEUE_BUF_SIZE (QUEUE_SIZE+1)
#define QUEUE_MEM QUEUE_BUF_SIZE * MTU
#define EEPROM_SIZE 4096
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
2018-04-05 10:10:42 -06:00
#endif
#define eeprom_addr(a) (a+EEPROM_OFFSET)
2018-04-05 10:10:42 -06:00
// MCU independent configuration parameters
2018-04-26 07:52:43 -06:00
const long serial_baudrate = 115200;
2018-06-27 06:08:16 -06:00
const int rssi_offset = 292;
2018-04-26 07:52:43 -06:00
2018-04-26 08:47:03 -06:00
const int lora_rx_turnaround_ms = 50;
2018-04-05 10:10:42 -06:00
// Default LoRa settings
2018-06-20 08:32:30 -06:00
int lora_sf = 0;
int lora_cr = 5;
int lora_txp = 0xFF;
2018-04-05 10:10:42 -06:00
uint32_t lora_bw = 0;
uint32_t lora_freq = 0;
// Operational variables
bool radio_locked = true;
bool radio_online = false;
bool hw_ready = false;
2018-06-27 03:42:48 -06:00
bool promisc = false;
2018-06-20 09:45:22 -06:00
uint8_t op_mode = MODE_HOST;
uint8_t model = 0x00;
uint8_t hwrev = 0x00;
2018-04-05 10:10:42 -06:00
2018-06-27 06:08:16 -06:00
int last_rssi = -292;
uint8_t last_rssi_raw = 0x00;
2018-04-05 10:10:42 -06:00
size_t read_len = 0;
uint8_t seq = 0xFF;
uint8_t pbuf[MTU];
uint8_t sbuf[MTU];
uint8_t cbuf[CMD_L];
2018-06-27 02:22:44 -06:00
#if QUEUE_SIZE > 0
uint8_t tbuf[MTU];
uint8_t qbuf[QUEUE_MEM];
size_t queued_lengths[QUEUE_BUF_SIZE];
#endif
2018-04-05 10:10:42 -06:00
uint32_t stat_rx = 0;
uint32_t stat_tx = 0;
2018-04-26 07:52:43 -06:00
bool outbound_ready = false;
2018-06-27 02:22:44 -06:00
size_t queue_head = 0;
size_t queue_tail = 0;
2018-04-26 07:52:43 -06:00
bool stat_signal_detected = false;
bool stat_signal_synced = false;
bool stat_rx_ongoing = false;
bool dcd = false;
bool dcd_led = false;
bool dcd_waiting = false;
uint16_t dcd_count = 0;
uint16_t dcd_threshold = 15;
uint32_t status_interval_ms = 3;
uint32_t last_status_update = 0;
// Status flags
const uint8_t SIG_DETECT = 0x01;
const uint8_t SIG_SYNCED = 0x02;
const uint8_t RX_ONGOING = 0x04;
2018-04-05 10:10:42 -06:00
#endif