Updated readme

This commit is contained in:
Mark Qvist 2022-11-10 11:52:13 +01:00
parent 4ab0c7adcf
commit 100d2986bc
1 changed files with 10 additions and 2 deletions

View File

@ -12,7 +12,7 @@ This is the firmware for [RNode](https://unsigned.io/rnode), a very flexible LoR
To install this firmware on homebrew RNodes and other supported boards, please use the [RNode Config Utility](https://github.com/markqvist/rnodeconfigutil). It contains an auto-installer that allows you to install the RNode firmware on a variety of boards. For guides and tutorials on how to get started with making your own RNodes, visit [unsigned.io](https://unsigned.io).
## Supported Hardware
## Installation & Supported Hardware
The RNode Firmware supports the following boards:
@ -26,7 +26,15 @@ The RNode Firmware supports the following boards:
- LilyGO LoRa32 v2.1 devices
- Heltec LoRa32 v2 devices
For configuring an RNode with this firmware, please have a look at the [RNode Config Utility](https://github.com/markqvist/rnodeconfigutil).
You can download and flash the firmware to supported boards using `rnodeconf`, the *RNode Config Utility*. All firmware releases are handled and installed directly through `rnodeconf`, which is inclueded in the `rns` package. It can be installed via `pip`:
```
# Install rnodeconf via rns package
pip install rns --upgrade
# Install the firmware on a board with the install guide
rnodeconf --autoinstall
```
## Operating Modes
RNode can operate in two modes, host-controlled (default) and TNC mode: