Initial multiplatform support
This commit is contained in:
parent
e1df8a2c75
commit
3e0536b272
37
Config.h
37
Config.h
|
@ -4,20 +4,30 @@
|
|||
#define CONFIG_H
|
||||
|
||||
#define MAJ_VERS 0x01
|
||||
#define MIN_VERS 0x12
|
||||
#define MIN_VERS 0x13
|
||||
|
||||
#define PLATFORM_AVR 0x90
|
||||
#define PLATFORM_ESP32 0x80
|
||||
|
||||
#define MCU_1284P 0x91
|
||||
#define MCU_2560 0x92
|
||||
#define MCU_ESP32 0x81
|
||||
|
||||
#define MODE_HOST 0x11
|
||||
#define MODE_TNC 0x12
|
||||
|
||||
#if defined(__AVR_ATmega1284P__)
|
||||
#define PLATFORM PLATFORM_AVR
|
||||
#define MCU_VARIANT MCU_1284P
|
||||
#warning "Firmware is being compiled for atmega1284p based boards"
|
||||
#elif defined(__AVR_ATmega2560__)
|
||||
#define PLATFORM PLATFORM_AVR
|
||||
#define MCU_VARIANT MCU_2560
|
||||
#warning "Firmware is being compiled for atmega2560 based boards"
|
||||
#elif defined(ESP32)
|
||||
#define PLATFORM PLATFORM_ESP32
|
||||
#define MCU_VARIANT MCU_ESP32
|
||||
#warning "Firmware is being compiled for ESP32 based boards"
|
||||
#else
|
||||
#error "The firmware cannot be compiled for the selected MCU variant"
|
||||
#endif
|
||||
|
@ -38,29 +48,40 @@
|
|||
const int pin_led_rx = 12;
|
||||
const int pin_led_tx = 13;
|
||||
|
||||
// TODO: Reset
|
||||
#define CONFIG_UART_BUFFER_SIZE 6144
|
||||
#define CONFIG_QUEUE_SIZE 6144
|
||||
#define CONFIG_QUEUE_MAX_LENGTH 250
|
||||
|
||||
#define EEPROM_SIZE 4096
|
||||
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
||||
#endif
|
||||
|
||||
#if MCU_VARIANT == MCU_2560
|
||||
|
||||
#elif MCU_VARIANT == MCU_2560
|
||||
const int pin_cs = 10;
|
||||
const int pin_reset = 9;
|
||||
const int pin_dio = 2;
|
||||
const int pin_led_rx = 12;
|
||||
const int pin_led_tx = 13;
|
||||
|
||||
// TODO: Reset
|
||||
#define CONFIG_UART_BUFFER_SIZE 2048
|
||||
#define CONFIG_QUEUE_SIZE 2048
|
||||
#define CONFIG_QUEUE_MAX_LENGTH 250
|
||||
#define CONFIG_QUEUE_MAX_LENGTH 80
|
||||
|
||||
#define EEPROM_SIZE 4096
|
||||
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
||||
|
||||
#elif MCU_VARIANT == MCU_ESP32
|
||||
const int pin_cs = 18;
|
||||
const int pin_reset = 23;
|
||||
const int pin_dio = 26;
|
||||
const int pin_led_rx = 2;
|
||||
const int pin_led_tx = 4;
|
||||
|
||||
#define CONFIG_UART_BUFFER_SIZE 6144
|
||||
#define CONFIG_QUEUE_SIZE 6144
|
||||
#define CONFIG_QUEUE_MAX_LENGTH 250
|
||||
|
||||
#define EEPROM_SIZE 1024
|
||||
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
||||
#endif
|
||||
|
||||
#define eeprom_addr(a) (a+EEPROM_OFFSET)
|
||||
|
@ -71,7 +92,7 @@
|
|||
|
||||
// SX1276 RSSI offset to get dBm value from
|
||||
// packet RSSI register
|
||||
const int rssi_offset = 157;
|
||||
const int rssi_offset = 157;
|
||||
|
||||
// Default LoRa settings
|
||||
int lora_sf = 0;
|
||||
|
|
|
@ -27,6 +27,8 @@
|
|||
#define CMD_BLINK 0x30
|
||||
#define CMD_RANDOM 0x40
|
||||
|
||||
#define CMD_PLATFORM 0x48
|
||||
#define CMD_MCU 0x49
|
||||
#define CMD_FW_VERSION 0x50
|
||||
#define CMD_ROM_READ 0x51
|
||||
#define CMD_ROM_WRITE 0x52
|
||||
|
@ -34,6 +36,9 @@
|
|||
#define CMD_CONF_DELETE 0x54
|
||||
#define CMD_UNLOCK_ROM 0x59
|
||||
#define ROM_UNLOCK_BYTE 0xF8
|
||||
#define CMD_RESET 0x55
|
||||
#define CMD_RESET_BYTE 0xF8
|
||||
|
||||
|
||||
#define DETECT_REQ 0x73
|
||||
#define DETECT_RESP 0x46
|
||||
|
|
2
LoRa.cpp
2
LoRa.cpp
|
@ -449,6 +449,8 @@ long LoRaClass::getSignalBandwidth()
|
|||
case 8: return 250E3;
|
||||
case 9: return 500E3;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void LoRaClass::handleLowDataRate(){
|
||||
|
|
23
Makefile
23
Makefile
|
@ -1,6 +1,29 @@
|
|||
prep:
|
||||
arduino-cli core update-index --config-file arduino-cli.yaml
|
||||
arduino-cli core install unsignedio:avr
|
||||
|
||||
firmware:
|
||||
arduino-cli compile --fqbn unsignedio:avr:rnode
|
||||
|
||||
release:
|
||||
arduino-cli compile --fqbn unsignedio:avr:rnode -e
|
||||
cp build/unsignedio.avr.rnode/RNode_Firmware.ino.hex Precompiled/rnode_firmware_latest.hex
|
||||
rm -r build
|
||||
|
||||
upload:
|
||||
arduino-cli upload -p /dev/ttyUSB0 --fqbn unsignedio:avr:rnode
|
||||
|
||||
prep-tbeam:
|
||||
arduino-cli core update-index --config-file arduino-cli.yaml
|
||||
arduino-cli core install esp32:esp32
|
||||
|
||||
firmware-tbeam:
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam
|
||||
|
||||
upload-tbeam:
|
||||
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:t-beam
|
||||
|
||||
release-tbeam:
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam -e
|
||||
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.bin Precompiled/rnode_firmware_latest_tbeam.bin
|
||||
rm -r build
|
|
@ -22,6 +22,12 @@ volatile bool serial_buffering = false;
|
|||
char sbuf[128];
|
||||
|
||||
void setup() {
|
||||
#if MCU_VARIANT == MCU_ESP32
|
||||
delay(1500);
|
||||
EEPROM.begin(EEPROM_SIZE);
|
||||
Serial.setRxBufferSize(CONFIG_UART_BUFFER_SIZE);
|
||||
#endif
|
||||
|
||||
// Seed the PRNG
|
||||
randomSeed(analogRead(0));
|
||||
|
||||
|
@ -54,6 +60,12 @@ void setup() {
|
|||
// pins for the LoRa module
|
||||
LoRa.setPins(pin_cs, pin_reset, pin_dio);
|
||||
|
||||
#if MCU_VARIANT == MCU_ESP32
|
||||
radio_locked = true;
|
||||
radio_online = false;
|
||||
hw_ready = false;
|
||||
#endif
|
||||
|
||||
// Validate board health, EEPROM and config
|
||||
validateStatus();
|
||||
}
|
||||
|
@ -76,6 +88,7 @@ bool startRadio() {
|
|||
// serial port and with the onboard LEDs
|
||||
kiss_indicate_error(ERROR_INITRADIO);
|
||||
led_indicate_error(0);
|
||||
return false;
|
||||
} else {
|
||||
radio_online = true;
|
||||
|
||||
|
@ -86,13 +99,17 @@ bool startRadio() {
|
|||
getFrequency();
|
||||
|
||||
LoRa.enableCrc();
|
||||
LoRa.onReceive(receiveCallback);
|
||||
|
||||
#if MCU_VARIANT != MCU_ESP32
|
||||
LoRa.onReceive(receive_callback);
|
||||
#endif
|
||||
|
||||
lora_receive();
|
||||
|
||||
// Flash an info pattern to indicate
|
||||
// that the radio is now on
|
||||
led_indicate_info(3);
|
||||
return true;
|
||||
}
|
||||
|
||||
} else {
|
||||
|
@ -100,10 +117,12 @@ bool startRadio() {
|
|||
// that the radio was locked, and thus
|
||||
// not started
|
||||
led_indicate_warning(3);
|
||||
return false;
|
||||
}
|
||||
} else {
|
||||
// If radio is already on, we silently
|
||||
// ignore the request.
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -120,7 +139,7 @@ void update_radio_lock() {
|
|||
}
|
||||
}
|
||||
|
||||
void receiveCallback(int packet_size) {
|
||||
void receive_callback(int packet_size) {
|
||||
if (!promisc) {
|
||||
// The standard operating mode allows large
|
||||
// packets with a payload up to 500 bytes,
|
||||
|
@ -197,7 +216,7 @@ void receiveCallback(int packet_size) {
|
|||
}
|
||||
} else {
|
||||
// In promiscuous mode, raw packets are
|
||||
// output directly over to the host
|
||||
// output directly to the host
|
||||
read_len = 0;
|
||||
last_rssi = LoRa.packetRssi();
|
||||
last_snr_raw = LoRa.packetSnrRaw();
|
||||
|
@ -232,7 +251,13 @@ void flushQueue(void) {
|
|||
queue_flushing = true;
|
||||
|
||||
size_t processed = 0;
|
||||
|
||||
#if MCU_VARIANT == MCU_ESP32
|
||||
while (!fifo16_isempty(&packet_starts)) {
|
||||
#else
|
||||
while (!fifo16_isempty_locked(&packet_starts)) {
|
||||
#endif
|
||||
|
||||
size_t start = fifo16_pop(&packet_starts);
|
||||
size_t length = fifo16_pop(&packet_lengths);
|
||||
|
||||
|
@ -497,6 +522,10 @@ void serialCallback(uint8_t sbyte) {
|
|||
if (sbyte == ROM_UNLOCK_BYTE) {
|
||||
unlock_rom();
|
||||
}
|
||||
} else if (command == CMD_RESET) {
|
||||
if (sbyte == CMD_RESET_BYTE) {
|
||||
hard_reset();
|
||||
}
|
||||
} else if (command == CMD_ROM_READ) {
|
||||
kiss_dump_eeprom();
|
||||
} else if (command == CMD_ROM_WRITE) {
|
||||
|
@ -516,6 +545,10 @@ void serialCallback(uint8_t sbyte) {
|
|||
}
|
||||
} else if (command == CMD_FW_VERSION) {
|
||||
kiss_indicate_version();
|
||||
} else if (command == CMD_PLATFORM) {
|
||||
kiss_indicate_platform();
|
||||
} else if (command == CMD_MCU) {
|
||||
kiss_indicate_mcu();
|
||||
} else if (command == CMD_CONF_SAVE) {
|
||||
eeprom_conf_save();
|
||||
} else if (command == CMD_CONF_DELETE) {
|
||||
|
@ -562,18 +595,31 @@ void checkModemStatus() {
|
|||
}
|
||||
|
||||
void validateStatus() {
|
||||
if (OPTIBOOT_MCUSR & (1<<PORF)) {
|
||||
#if MCU_VARIANT == MCU_1284P || MCU_VARIANT == MCU_2560
|
||||
uint8_t boot_flags = OPTIBOOT_MCUSR;
|
||||
uint8_t F_POR = PORF;
|
||||
uint8_t F_BOR = BORF;
|
||||
uint8_t F_WDR = WDRF;
|
||||
#elif MCU_VARIANT == MCU_ESP32
|
||||
// TODO: Get ESP32 boot flags
|
||||
uint8_t boot_flags = 0x02;
|
||||
uint8_t F_POR = 0x00;
|
||||
uint8_t F_BOR = 0x00;
|
||||
uint8_t F_WDR = 0x01;
|
||||
#endif
|
||||
|
||||
if (boot_flags & (1<<F_POR)) {
|
||||
boot_vector = START_FROM_POWERON;
|
||||
} else if (OPTIBOOT_MCUSR & (1<<BORF)) {
|
||||
} else if (boot_flags & (1<<F_BOR)) {
|
||||
boot_vector = START_FROM_BROWNOUT;
|
||||
} else if (OPTIBOOT_MCUSR & (1<<WDRF)) {
|
||||
} else if (boot_flags & (1<<F_WDR)) {
|
||||
boot_vector = START_FROM_BOOTLOADER;
|
||||
} else {
|
||||
Serial.write("Error, indeterminate boot vector\r\n");
|
||||
led_indicate_boot_error();
|
||||
}
|
||||
|
||||
if (boot_vector == START_FROM_BOOTLOADER) {
|
||||
if (boot_vector == START_FROM_BOOTLOADER || boot_vector == START_FROM_POWERON) {
|
||||
if (eeprom_lock_set()) {
|
||||
if (eeprom_product_valid() && eeprom_model_valid() && eeprom_hwrev_valid()) {
|
||||
if (eeprom_checksum_valid()) {
|
||||
|
@ -602,6 +648,13 @@ void loop() {
|
|||
if (radio_online) {
|
||||
checkModemStatus();
|
||||
|
||||
#if MCU_VARIANT == MCU_ESP32
|
||||
int packet_size = LoRa.parsePacket();
|
||||
if (packet_size) {
|
||||
receive_callback(packet_size);
|
||||
}
|
||||
#endif
|
||||
|
||||
if (queue_height > 0) {
|
||||
if (!dcd_waiting) updateModemStatus();
|
||||
|
||||
|
@ -630,14 +683,26 @@ void loop() {
|
|||
}
|
||||
}
|
||||
|
||||
if (!fifo_isempty_locked(&serialFIFO)) serial_poll();
|
||||
#if MCU_VARIANT == MCU_ESP32
|
||||
buffer_serial();
|
||||
#endif
|
||||
|
||||
#if MCU_VARIANT != MCU_ESP32
|
||||
if (!fifo_isempty_locked(&serialFIFO)) serial_poll();
|
||||
#else
|
||||
if (!fifo_isempty(&serialFIFO)) serial_poll();
|
||||
#endif
|
||||
}
|
||||
|
||||
volatile bool serial_polling = false;
|
||||
void serial_poll() {
|
||||
serial_polling = true;
|
||||
|
||||
#if MCU_VARIANT != MCU_ESP32
|
||||
while (!fifo_isempty_locked(&serialFIFO)) {
|
||||
#else
|
||||
while (!fifo_isempty(&serialFIFO)) {
|
||||
#endif
|
||||
char sbyte = fifo_pop(&serialFIFO);
|
||||
serialCallback(sbyte);
|
||||
}
|
||||
|
@ -645,6 +710,7 @@ void serial_poll() {
|
|||
serial_polling = false;
|
||||
}
|
||||
|
||||
|
||||
#define MAX_CYCLES 20
|
||||
void buffer_serial() {
|
||||
if (!serial_buffering) {
|
||||
|
@ -654,9 +720,15 @@ void buffer_serial() {
|
|||
while (c < MAX_CYCLES && Serial.available()) {
|
||||
c++;
|
||||
|
||||
if (!fifo_isfull_locked(&serialFIFO)) {
|
||||
fifo_push_locked(&serialFIFO, Serial.read());
|
||||
}
|
||||
#if MCU_VARIANT != MCU_ESP32
|
||||
if (!fifo_isfull_locked(&serialFIFO)) {
|
||||
fifo_push_locked(&serialFIFO, Serial.read());
|
||||
}
|
||||
#else
|
||||
if (!fifo_isfull(&serialFIFO)) {
|
||||
fifo_push(&serialFIFO, Serial.read());
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
serial_buffering = false;
|
||||
|
@ -664,17 +736,39 @@ void buffer_serial() {
|
|||
}
|
||||
|
||||
void serial_interrupt_init() {
|
||||
TCCR3A = 0;
|
||||
TCCR3B = _BV(CS10) |
|
||||
_BV(WGM33)|
|
||||
_BV(WGM32);
|
||||
#if MCU_VARIANT == MCU_1284P
|
||||
TCCR3A = 0;
|
||||
TCCR3B = _BV(CS10) |
|
||||
_BV(WGM33)|
|
||||
_BV(WGM32);
|
||||
|
||||
// Buffer incoming frames every 1ms
|
||||
ICR3 = 16000;
|
||||
// Buffer incoming frames every 1ms
|
||||
ICR3 = 16000;
|
||||
|
||||
TIMSK3 = _BV(ICIE3);
|
||||
|
||||
#elif MCU_VARIANT == MCU_2560
|
||||
// TODO: This should probably be updated for
|
||||
// atmega2560 support. Might be source of
|
||||
// reported issues from snh.
|
||||
TCCR3A = 0;
|
||||
TCCR3B = _BV(CS10) |
|
||||
_BV(WGM33)|
|
||||
_BV(WGM32);
|
||||
|
||||
// Buffer incoming frames every 1ms
|
||||
ICR3 = 16000;
|
||||
|
||||
TIMSK3 = _BV(ICIE3);
|
||||
|
||||
#elif MCU_VARIANT == MCU_ESP32
|
||||
// No interrupt-based polling on ESP32
|
||||
#endif
|
||||
|
||||
TIMSK3 = _BV(ICIE3);
|
||||
}
|
||||
|
||||
ISR(TIMER3_CAPT_vect) {
|
||||
buffer_serial();
|
||||
}
|
||||
#if MCU_VARIANT == MCU_1284P || MCU_VARIANT == MCU_2560
|
||||
ISR(TIMER3_CAPT_vect) {
|
||||
buffer_serial();
|
||||
}
|
||||
#endif
|
5
ROM.h
5
ROM.h
|
@ -4,8 +4,13 @@
|
|||
#define CHECKSUMMED_SIZE 0x0B
|
||||
|
||||
#define PRODUCT_RNODE 0x03
|
||||
#define PRODUCT_HMBRW 0xF0
|
||||
#define PRODUCT_TBEAM 0xE0
|
||||
#define MODEL_A4 0xA4
|
||||
#define MODEL_A9 0xA9
|
||||
#define MODEL_E4 0xE4
|
||||
#define MODEL_E9 0xE9
|
||||
#define MODEL_FF 0xFF
|
||||
|
||||
#define ADDR_PRODUCT 0x00
|
||||
#define ADDR_MODEL 0x01
|
||||
|
|
338
Utilities.h
338
Utilities.h
|
@ -1,23 +1,52 @@
|
|||
#include <EEPROM.h>
|
||||
#include <stddef.h>
|
||||
#include <util/atomic.h>
|
||||
#include "LoRa.h"
|
||||
#include "ROM.h"
|
||||
#include "Config.h"
|
||||
#include "Framing.h"
|
||||
#include "MD5.h"
|
||||
|
||||
uint8_t boot_vector = 0x00;
|
||||
uint8_t OPTIBOOT_MCUSR __attribute__ ((section(".noinit")));
|
||||
void resetFlagsInit(void) __attribute__ ((naked)) __attribute__ ((used)) __attribute__ ((section (".init0")));
|
||||
void resetFlagsInit(void) {
|
||||
__asm__ __volatile__ ("sts %0, r2\n" : "=m" (OPTIBOOT_MCUSR) :);
|
||||
}
|
||||
#if MCU_VARIANT == MCU_1284P || MCU_VARIANT == MCU_2560
|
||||
#include <avr/wdt.h>
|
||||
#include <util/atomic.h>
|
||||
#elif MCU_VARIANT == MCU_ESP32
|
||||
// TODO: Hard reset on ESP32
|
||||
#endif
|
||||
|
||||
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
|
||||
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
|
||||
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
|
||||
uint8_t boot_vector = 0x00;
|
||||
|
||||
#if MCU_VARIANT == MCU_1284P || MCU_VARIANT == MCU_2560
|
||||
uint8_t OPTIBOOT_MCUSR __attribute__ ((section(".noinit")));
|
||||
void resetFlagsInit(void) __attribute__ ((naked)) __attribute__ ((used)) __attribute__ ((section (".init0")));
|
||||
void resetFlagsInit(void) {
|
||||
__asm__ __volatile__ ("sts %0, r2\n" : "=m" (OPTIBOOT_MCUSR) :);
|
||||
}
|
||||
#elif MCU_VARIANT == MCU_ESP32
|
||||
// TODO: Get ESP32 boot flags
|
||||
#endif
|
||||
|
||||
#if MCU_VARIANT == MCU_1284P || MCU_VARIANT == MCU_2560
|
||||
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
|
||||
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
|
||||
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
|
||||
#elif MCU_VARIANT == MCU_ESP32
|
||||
void led_rx_on() { digitalWrite(pin_led_rx, LOW); }
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, HIGH); }
|
||||
void led_tx_on() { digitalWrite(pin_led_tx, LOW); }
|
||||
void led_tx_off() { digitalWrite(pin_led_tx, HIGH); }
|
||||
#endif
|
||||
|
||||
void hard_reset(void) {
|
||||
#if MCU_VARIANT == MCU_1284P || MCU_VARIANT == MCU_2560
|
||||
wdt_enable(WDTO_15MS);
|
||||
while(true) {
|
||||
led_tx_on(); led_rx_off();
|
||||
}
|
||||
#elif MCU_VARIANT == MCU_ESP32
|
||||
ESP.restart();
|
||||
#endif
|
||||
}
|
||||
|
||||
void led_indicate_error(int cycles) {
|
||||
bool forever = (cycles == 0) ? true : false;
|
||||
|
@ -31,8 +60,8 @@ void led_indicate_error(int cycles) {
|
|||
delay(100);
|
||||
if (!forever) cycles--;
|
||||
}
|
||||
digitalWrite(pin_led_rx, LOW);
|
||||
digitalWrite(pin_led_tx, LOW);
|
||||
led_rx_off();
|
||||
led_tx_off();
|
||||
}
|
||||
|
||||
void led_indicate_boot_error() {
|
||||
|
@ -51,63 +80,131 @@ void led_indicate_warning(int cycles) {
|
|||
cycles = forever ? 1 : cycles;
|
||||
digitalWrite(pin_led_tx, HIGH);
|
||||
while(cycles > 0) {
|
||||
digitalWrite(pin_led_tx, LOW);
|
||||
led_tx_off();
|
||||
delay(100);
|
||||
digitalWrite(pin_led_tx, HIGH);
|
||||
led_tx_on();
|
||||
delay(100);
|
||||
if (!forever) cycles--;
|
||||
}
|
||||
digitalWrite(pin_led_tx, LOW);
|
||||
led_tx_off();
|
||||
}
|
||||
|
||||
void led_indicate_info(int cycles) {
|
||||
bool forever = (cycles == 0) ? true : false;
|
||||
cycles = forever ? 1 : cycles;
|
||||
while(cycles > 0) {
|
||||
digitalWrite(pin_led_rx, LOW);
|
||||
delay(100);
|
||||
digitalWrite(pin_led_rx, HIGH);
|
||||
delay(100);
|
||||
if (!forever) cycles--;
|
||||
}
|
||||
digitalWrite(pin_led_rx, LOW);
|
||||
}
|
||||
#if MCU_VARIANT == MCU_1284P || MCU_VARIANT == MCU_2560
|
||||
void led_indicate_info(int cycles) {
|
||||
bool forever = (cycles == 0) ? true : false;
|
||||
cycles = forever ? 1 : cycles;
|
||||
while(cycles > 0) {
|
||||
led_rx_off();
|
||||
delay(100);
|
||||
led_rx_on();
|
||||
delay(100);
|
||||
if (!forever) cycles--;
|
||||
}
|
||||
led_rx_off();
|
||||
}
|
||||
#elif MCU_VARIANT == MCU_ESP32
|
||||
void led_indicate_info(int cycles) {
|
||||
bool forever = (cycles == 0) ? true : false;
|
||||
cycles = forever ? 1 : cycles;
|
||||
while(cycles > 0) {
|
||||
led_tx_off();
|
||||
delay(100);
|
||||
led_tx_on();
|
||||
delay(100);
|
||||
if (!forever) cycles--;
|
||||
}
|
||||
led_tx_off();
|
||||
}
|
||||
#endif
|
||||
|
||||
uint8_t led_standby_min = 1;
|
||||
uint8_t led_standby_max = 40;
|
||||
|
||||
unsigned long led_standby_ticks = 0;
|
||||
#if MCU_VARIANT == MCU_1284P || MCU_VARIANT == MCU_2560
|
||||
uint8_t led_standby_min = 1;
|
||||
uint8_t led_standby_max = 40;
|
||||
unsigned long led_standby_wait = 11000;
|
||||
#elif MCU_VARIANT == MCU_ESP32
|
||||
uint8_t led_standby_min = 200;
|
||||
uint8_t led_standby_max = 255;
|
||||
uint8_t led_notready_min = 0;
|
||||
uint8_t led_notready_max = 255;
|
||||
uint8_t led_notready_value = led_notready_min;
|
||||
int8_t led_notready_direction = 0;
|
||||
unsigned long led_notready_ticks = 0;
|
||||
unsigned long led_standby_wait = 4000;
|
||||
unsigned long led_notready_wait = 150;
|
||||
#endif
|
||||
uint8_t led_standby_value = led_standby_min;
|
||||
int8_t led_standby_direction = 0;
|
||||
unsigned long led_standby_ticks = 0;
|
||||
unsigned long led_standby_wait = 11000;
|
||||
void led_indicate_standby() {
|
||||
led_standby_ticks++;
|
||||
if (led_standby_ticks > led_standby_wait) {
|
||||
led_standby_ticks = 0;
|
||||
if (led_standby_value <= led_standby_min) {
|
||||
led_standby_direction = 1;
|
||||
} else if (led_standby_value >= led_standby_max) {
|
||||
led_standby_direction = -1;
|
||||
}
|
||||
led_standby_value += led_standby_direction;
|
||||
analogWrite(pin_led_rx, led_standby_value);
|
||||
digitalWrite(pin_led_tx, 0);
|
||||
}
|
||||
}
|
||||
|
||||
void led_indicate_not_ready() {
|
||||
led_standby_ticks++;
|
||||
if (led_standby_ticks > led_standby_wait) {
|
||||
led_standby_ticks = 0;
|
||||
if (led_standby_value <= led_standby_min) {
|
||||
led_standby_direction = 1;
|
||||
} else if (led_standby_value >= led_standby_max) {
|
||||
led_standby_direction = -1;
|
||||
#if MCU_VARIANT == MCU_1284P || MCU_VARIANT == MCU_2560
|
||||
void led_indicate_standby() {
|
||||
led_standby_ticks++;
|
||||
if (led_standby_ticks > led_standby_wait) {
|
||||
led_standby_ticks = 0;
|
||||
if (led_standby_value <= led_standby_min) {
|
||||
led_standby_direction = 1;
|
||||
} else if (led_standby_value >= led_standby_max) {
|
||||
led_standby_direction = -1;
|
||||
}
|
||||
led_standby_value += led_standby_direction;
|
||||
analogWrite(pin_led_rx, led_standby_value);
|
||||
led_tx_off();
|
||||
}
|
||||
led_standby_value += led_standby_direction;
|
||||
analogWrite(pin_led_tx, led_standby_value);
|
||||
digitalWrite(pin_led_rx, 0);
|
||||
}
|
||||
}
|
||||
#elif MCU_VARIANT == MCU_ESP32
|
||||
void led_indicate_standby() {
|
||||
led_standby_ticks++;
|
||||
if (led_standby_ticks > led_standby_wait) {
|
||||
led_standby_ticks = 0;
|
||||
if (led_standby_value <= led_standby_min) {
|
||||
led_standby_direction = 1;
|
||||
} else if (led_standby_value >= led_standby_max) {
|
||||
led_standby_direction = -1;
|
||||
}
|
||||
led_standby_value += led_standby_direction;
|
||||
analogWrite(pin_led_tx, led_standby_value);
|
||||
led_rx_off();
|
||||
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#if MCU_VARIANT == MCU_1284P || MCU_VARIANT == MCU_2560
|
||||
void led_indicate_not_ready() {
|
||||
led_standby_ticks++;
|
||||
if (led_standby_ticks > led_standby_wait) {
|
||||
led_standby_ticks = 0;
|
||||
if (led_standby_value <= led_standby_min) {
|
||||
led_standby_direction = 1;
|
||||
} else if (led_standby_value >= led_standby_max) {
|
||||
led_standby_direction = -1;
|
||||
}
|
||||
led_standby_value += led_standby_direction;
|
||||
analogWrite(pin_led_tx, led_standby_value);
|
||||
led_rx_off();
|
||||
}
|
||||
}
|
||||
#elif MCU_VARIANT == MCU_ESP32
|
||||
void led_indicate_not_ready() {
|
||||
led_notready_ticks++;
|
||||
if (led_notready_ticks > led_notready_wait) {
|
||||
led_notready_ticks = 0;
|
||||
if (led_notready_value <= led_notready_min) {
|
||||
led_notready_direction = 1;
|
||||
} else if (led_notready_value >= led_notready_max) {
|
||||
led_notready_direction = -1;
|
||||
}
|
||||
led_notready_value += led_notready_direction;
|
||||
if (led_notready_value > 128) {
|
||||
led_tx_on();
|
||||
} else {
|
||||
led_tx_off();
|
||||
}
|
||||
led_rx_off();
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
void escapedSerialWrite(uint8_t byte) {
|
||||
if (byte == FEND) { Serial.write(FESC); byte = TFEND; }
|
||||
|
@ -266,6 +363,20 @@ void kiss_indicate_version() {
|
|||
Serial.write(FEND);
|
||||
}
|
||||
|
||||
void kiss_indicate_platform() {
|
||||
Serial.write(FEND);
|
||||
Serial.write(CMD_PLATFORM);
|
||||
Serial.write(PLATFORM);
|
||||
Serial.write(FEND);
|
||||
}
|
||||
|
||||
void kiss_indicate_mcu() {
|
||||
Serial.write(FEND);
|
||||
Serial.write(CMD_MCU);
|
||||
Serial.write(MCU_VARIANT);
|
||||
Serial.write(FEND);
|
||||
}
|
||||
|
||||
bool isSplitPacket(uint8_t header) {
|
||||
return (header & FLAG_SPLIT);
|
||||
}
|
||||
|
@ -384,9 +495,21 @@ void kiss_dump_eeprom() {
|
|||
Serial.write(FEND);
|
||||
}
|
||||
|
||||
void eeprom_update(int mapped_addr, uint8_t byte) {
|
||||
#if MCU_VARIANT == MCU_1284P || MCU_VARIANT == MCU_2560
|
||||
EEPROM.update(mapped_addr, byte);
|
||||
#elif MCU_VARIANT == MCU_ESP32
|
||||
if (EEPROM.read(mapped_addr) != byte) {
|
||||
EEPROM.write(mapped_addr, byte);
|
||||
EEPROM.commit();
|
||||
}
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
void eeprom_write(uint8_t addr, uint8_t byte) {
|
||||
if (!eeprom_info_locked() && addr >= 0 && addr < EEPROM_RESERVED) {
|
||||
EEPROM.update(eeprom_addr(addr), byte);
|
||||
eeprom_update(eeprom_addr(addr), byte);
|
||||
} else {
|
||||
kiss_indicate_error(ERROR_EEPROM_LOCKED);
|
||||
}
|
||||
|
@ -394,9 +517,9 @@ void eeprom_write(uint8_t addr, uint8_t byte) {
|
|||
|
||||
void eeprom_erase() {
|
||||
for (int addr = 0; addr < EEPROM_RESERVED; addr++) {
|
||||
EEPROM.update(eeprom_addr(addr), 0xFF);
|
||||
eeprom_update(eeprom_addr(addr), 0xFF);
|
||||
}
|
||||
while (true) { led_tx_on(); led_rx_off(); }
|
||||
hard_reset();
|
||||
}
|
||||
|
||||
bool eeprom_lock_set() {
|
||||
|
@ -408,7 +531,8 @@ bool eeprom_lock_set() {
|
|||
}
|
||||
|
||||
bool eeprom_product_valid() {
|
||||
if (EEPROM.read(eeprom_addr(ADDR_PRODUCT)) == PRODUCT_RNODE) {
|
||||
uint8_t rval = EEPROM.read(eeprom_addr(ADDR_PRODUCT));
|
||||
if (rval == PRODUCT_RNODE || rval == PRODUCT_HMBRW || rval == PRODUCT_TBEAM) {
|
||||
return true;
|
||||
} else {
|
||||
return false;
|
||||
|
@ -417,7 +541,7 @@ bool eeprom_product_valid() {
|
|||
|
||||
bool eeprom_model_valid() {
|
||||
model = EEPROM.read(eeprom_addr(ADDR_MODEL));
|
||||
if (model == MODEL_A4 || model == MODEL_A9) {
|
||||
if (model == MODEL_A4 || model == MODEL_A9 || model == MODEL_FF || model == MODEL_E4 || model == MODEL_E9) {
|
||||
return true;
|
||||
} else {
|
||||
return false;
|
||||
|
@ -475,21 +599,21 @@ void eeprom_conf_load() {
|
|||
|
||||
void eeprom_conf_save() {
|
||||
if (hw_ready && radio_online) {
|
||||
EEPROM.update(eeprom_addr(ADDR_CONF_SF), lora_sf);
|
||||
EEPROM.update(eeprom_addr(ADDR_CONF_CR), lora_cr);
|
||||
EEPROM.update(eeprom_addr(ADDR_CONF_TXP), lora_txp);
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_SF), lora_sf);
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_CR), lora_cr);
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_TXP), lora_txp);
|
||||
|
||||
EEPROM.update(eeprom_addr(ADDR_CONF_BW)+0x00, lora_bw>>24);
|
||||
EEPROM.update(eeprom_addr(ADDR_CONF_BW)+0x01, lora_bw>>16);
|
||||
EEPROM.update(eeprom_addr(ADDR_CONF_BW)+0x02, lora_bw>>8);
|
||||
EEPROM.update(eeprom_addr(ADDR_CONF_BW)+0x03, lora_bw);
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_BW)+0x00, lora_bw>>24);
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_BW)+0x01, lora_bw>>16);
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_BW)+0x02, lora_bw>>8);
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_BW)+0x03, lora_bw);
|
||||
|
||||
EEPROM.update(eeprom_addr(ADDR_CONF_FREQ)+0x00, lora_freq>>24);
|
||||
EEPROM.update(eeprom_addr(ADDR_CONF_FREQ)+0x01, lora_freq>>16);
|
||||
EEPROM.update(eeprom_addr(ADDR_CONF_FREQ)+0x02, lora_freq>>8);
|
||||
EEPROM.update(eeprom_addr(ADDR_CONF_FREQ)+0x03, lora_freq);
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_FREQ)+0x00, lora_freq>>24);
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_FREQ)+0x01, lora_freq>>16);
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_FREQ)+0x02, lora_freq>>8);
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_FREQ)+0x03, lora_freq);
|
||||
|
||||
EEPROM.update(eeprom_addr(ADDR_CONF_OK), CONF_OK_BYTE);
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_OK), CONF_OK_BYTE);
|
||||
led_indicate_info(10);
|
||||
} else {
|
||||
led_indicate_warning(10);
|
||||
|
@ -497,7 +621,7 @@ void eeprom_conf_save() {
|
|||
}
|
||||
|
||||
void eeprom_conf_delete() {
|
||||
EEPROM.update(eeprom_addr(ADDR_CONF_OK), 0x00);
|
||||
eeprom_update(eeprom_addr(ADDR_CONF_OK), 0x00);
|
||||
}
|
||||
|
||||
void unlock_rom() {
|
||||
|
@ -544,28 +668,31 @@ inline void fifo_flush(FIFOBuffer *f) {
|
|||
f->head = f->tail;
|
||||
}
|
||||
|
||||
static inline bool fifo_isempty_locked(const FIFOBuffer *f) {
|
||||
bool result;
|
||||
ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
|
||||
result = fifo_isempty(f);
|
||||
}
|
||||
return result;
|
||||
}
|
||||
#if MCU_VARIANT != MCU_ESP32
|
||||
static inline bool fifo_isempty_locked(const FIFOBuffer *f) {
|
||||
bool result;
|
||||
ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
|
||||
result = fifo_isempty(f);
|
||||
}
|
||||
return result;
|
||||
}
|
||||
|
||||
static inline bool fifo_isfull_locked(const FIFOBuffer *f) {
|
||||
bool result;
|
||||
ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
|
||||
result = fifo_isfull(f);
|
||||
}
|
||||
return result;
|
||||
}
|
||||
static inline bool fifo_isfull_locked(const FIFOBuffer *f) {
|
||||
bool result;
|
||||
ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
|
||||
result = fifo_isfull(f);
|
||||
}
|
||||
return result;
|
||||
}
|
||||
|
||||
static inline void fifo_push_locked(FIFOBuffer *f, unsigned char c) {
|
||||
ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
|
||||
fifo_push(f, c);
|
||||
}
|
||||
}
|
||||
static inline void fifo_push_locked(FIFOBuffer *f, unsigned char c) {
|
||||
ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
|
||||
fifo_push(f, c);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
static inline unsigned char fifo_pop_locked(FIFOBuffer *f) {
|
||||
unsigned char c;
|
||||
ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
|
||||
|
@ -573,6 +700,7 @@ static inline unsigned char fifo_pop_locked(FIFOBuffer *f) {
|
|||
}
|
||||
return c;
|
||||
}
|
||||
*/
|
||||
|
||||
inline void fifo_init(FIFOBuffer *f, unsigned char *buffer, size_t size) {
|
||||
f->head = f->tail = f->begin = buffer;
|
||||
|
@ -622,14 +750,18 @@ inline void fifo16_flush(FIFOBuffer16 *f) {
|
|||
f->head = f->tail;
|
||||
}
|
||||
|
||||
static inline bool fifo16_isempty_locked(const FIFOBuffer16 *f) {
|
||||
bool result;
|
||||
ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
|
||||
result = fifo16_isempty(f);
|
||||
}
|
||||
return result;
|
||||
}
|
||||
#if MCU_VARIANT != MCU_ESP32
|
||||
static inline bool fifo16_isempty_locked(const FIFOBuffer16 *f) {
|
||||
bool result;
|
||||
ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
|
||||
result = fifo16_isempty(f);
|
||||
}
|
||||
|
||||
return result;
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
static inline bool fifo16_isfull_locked(const FIFOBuffer16 *f) {
|
||||
bool result;
|
||||
ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
|
||||
|
@ -638,6 +770,7 @@ static inline bool fifo16_isfull_locked(const FIFOBuffer16 *f) {
|
|||
return result;
|
||||
}
|
||||
|
||||
|
||||
static inline void fifo16_push_locked(FIFOBuffer16 *f, size_t c) {
|
||||
ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {
|
||||
fifo16_push(f, c);
|
||||
|
@ -651,6 +784,7 @@ static inline size_t fifo16_pop_locked(FIFOBuffer16 *f) {
|
|||
}
|
||||
return c;
|
||||
}
|
||||
*/
|
||||
|
||||
inline void fifo16_init(FIFOBuffer16 *f, size_t *buffer, size_t size) {
|
||||
f->head = f->tail = f->begin = buffer;
|
||||
|
|
Loading…
Reference in New Issue