Cleanup

Config.h

@@ -20,7 +20,7 @@
 	#define CONFIG_H
 
 	#define MAJ_VERS  0x01
-	#define MIN_VERS  0x4a
+	#define MIN_VERS  0x4b
 
 	#define MODE_HOST 0x11
 	#define MODE_TNC  0x12

Makefile

@@ -175,8 +175,8 @@ upload-rnode_ng_21:
 	arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:ttgo-lora32
 	@sleep 1
 	rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin)
-	#@sleep 3
-	#python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
+	@sleep 3
+	python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 upload-t3s3:
 	@echo

RNode_Firmware.ino

@@ -1372,6 +1372,7 @@ void sleep_now() {
 }
 
 void button_event(uint8_t event, unsigned long duration) {
+  #if MCU_VARIANT == MCU_ESP32
     display_unblank();
     if (duration > 6000) {
       bt_enable_pairing();
@@ -1389,6 +1390,7 @@ void button_event(uint8_t event, unsigned long duration) {
         bt_stop();
       }
     }
+  #endif
 }
 
 volatile bool serial_polling = false;

Utilities.h

@@ -49,6 +49,8 @@ uint8_t eeprom_read(uint32_t mapped_addr);
 
 #if HAS_DISPLAY == true
   #include "Display.h"
+#else
+	void display_unblank() {}
 #endif
 
 #if HAS_BLUETOOTH == true || HAS_BLE == true
@@ -1439,6 +1441,7 @@ void da_conf_save(uint8_t dadr) {
 }
 
 void db_conf_save(uint8_t val) {
+	#if HAS_DISPLAY
 		if (val == 0x00) {
 			display_blanking_enabled = false;
 		} else {
@@ -1447,6 +1450,7 @@ void db_conf_save(uint8_t val) {
 		}
 		eeprom_update(eeprom_addr(ADDR_CONF_BSET), CONF_OK_BYTE);
 		eeprom_update(eeprom_addr(ADDR_CONF_DBLK), val);
+	#endif
 }
 
 void np_int_conf_save(uint8_t p_int) {