Added battery state reporting over USB/Serial/Bluetooth. Implements #39.

Config.h

@@ -19,7 +19,7 @@
 	#define CONFIG_H
 
 	#define MAJ_VERS  0x01
-	#define MIN_VERS  0x40
+	#define MIN_VERS  0x41
 
 	#define PLATFORM_AVR   0x90
   #define PLATFORM_ESP32 0x80

Framing.h

@@ -44,6 +44,7 @@
   #define CMD_STAT_SNR    0x24
   #define CMD_STAT_CHTM   0x25
   #define CMD_STAT_PHYPRM 0x26
+  #define CMD_STAT_BAT    0x27
   #define CMD_BLINK       0x30
   #define CMD_RANDOM      0x40
 

Power.h

@@ -32,6 +32,9 @@
 uint32_t last_pmu_update = 0;
 uint8_t pmu_target_pps = 1;
 int pmu_update_interval = 1000/pmu_target_pps;
+uint8_t pmu_rc = 0;
+#define PMU_R_INTERVAL 5
+void kiss_indicate_battery();
 
 void measure_battery() {
   #if BOARD_MODEL == BOARD_RNODE_NG_21 || BOARD_MODEL == BOARD_LORA32_V2_1
@@ -82,6 +85,8 @@ void measure_battery() {
         #endif
       }
 
+
+
       // if (bt_state == BT_STATE_CONNECTED) {
       //   SerialBT.printf("Bus voltage %.3fv. Unfiltered %.3fv.", battery_voltage, bat_v_samples[BAT_SAMPLES-1]);
       //   if (bat_voltage_dropping) {
@@ -154,6 +159,13 @@ void measure_battery() {
     //   SerialBT.println("");
     // }
   #endif
+
+  if (battery_ready) {
+    pmu_rc++;
+    if (pmu_rc%PMU_R_INTERVAL == 0) {
+      kiss_indicate_battery();
+    }
+  }
 }
 
 void update_pmu() {

Utilities.h

@@ -755,6 +755,16 @@ void kiss_indicate_phy_stats() {
 	#endif
 }
 
+void kiss_indicate_battery() {
+	#if MCU_VARIANT == MCU_ESP32
+		serial_write(FEND);
+		serial_write(CMD_STAT_BAT);
+		escaped_serial_write(battery_state);
+		escaped_serial_write((uint8_t)int(battery_percent));
+		serial_write(FEND);
+	#endif
+}
+
 void kiss_indicate_btpin() {
 	#if HAS_BLUETOOTH
 		serial_write(FEND);