From 79f88eee2f02ec3c573638fc9a3acd32faa2656e Mon Sep 17 00:00:00 2001 From: Mark Qvist Date: Sat, 18 May 2024 01:07:09 +0200 Subject: [PATCH] Added flashing support for T3S3 --- Makefile | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 6f893a3..4dfc86d 100644 --- a/Makefile +++ b/Makefile @@ -176,11 +176,17 @@ upload-rnode_ng_21: python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin upload-t3s3: + @echo + @echo Put board into flashing mode by holding BOOT button while momentarily pressing the RESET button. Hit enter when done. + @read arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3 + @sleep 2 + python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin + @echo + @echo Press the RESET button on the board now, and hit enter + @read @sleep 1 rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin) - @sleep 3 - python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin upload-featheresp32: arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:featheresp32