ESP32 adjustments
This commit is contained in:
Mark Qvist
parent
0e28c759cb
commit
d9a982b876
4
Boards.h
4
Boards.h
|
|
@ -47,6 +47,10 @@
|
|||
#define MODEM SX1262
|
||||
#elif BOARD_MODEL == BOARD_RNODE_NG_22
|
||||
#define MODEM SX1262
|
||||
const int pin_cs = 7;
|
||||
const int pin_sclk = 5;
|
||||
const int pin_mosi = 6;
|
||||
const int pin_miso = 3;
|
||||
#elif BOARD_MODEL == BOARD_GENERIC_NRF52
|
||||
#define MODEM SX1262
|
||||
#else
|
||||
|
|
|
|||
6
Config.h
6
Config.h
|
|
@ -285,9 +285,13 @@
|
|||
#define HAS_NP true
|
||||
#define HAS_SD false
|
||||
#define HAS_EEPROM true
|
||||
const int pin_cs = 7;
|
||||
#define HAS_RF_SWITCH_RX_TX true
|
||||
#define HAS_BUSY true
|
||||
const int pin_reset = 8;
|
||||
const int pin_rxen = 21;
|
||||
const int pin_dio = 33;
|
||||
const int pin_busy = 34;
|
||||
|
||||
const int pin_np = 38;
|
||||
const int pin_dac = 25;
|
||||
const int pin_adc = 1;
|
||||
|
|
|
|||
43
Makefile
43
Makefile
|
|
@ -168,7 +168,7 @@ upload-rnode_ng_22:
|
|||
@sleep 1
|
||||
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
|
||||
@sleep 3
|
||||
python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before hard_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-featheresp32:
|
||||
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:featheresp32
|
||||
|
|
@ -184,18 +184,18 @@ upload-rak4630:
|
|||
|
||||
release: release-all
|
||||
|
||||
release-all: console-site spiffs-image release-rnode release-mega2560 release-tbeam release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled firmware-lora32_v21_tcxo release-featheresp32 release-genericesp32 release-heltec32_v2 release-heltec32_v2_extled release-rnode_ng_20 release-rnode_ng_21 release-hashes
|
||||
release-all: console-site spiffs-image release-rnode release-tbeam release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled firmware-lora32_v21_tcxo release-featheresp32 release-genericesp32 release-heltec32_v2 release-heltec32_v2_extled release-rnode_ng_20 release-rnode_ng_21 release-hashes
|
||||
|
||||
release-hashes:
|
||||
python ./release_hashes.py > ./Release/release.json
|
||||
|
||||
release-rnode:
|
||||
arduino-cli compile --fqbn unsignedio:avr:rnode -e --build-property "compiler.cpp.extra_flags=\"-DMODEM=0x01\""
|
||||
arduino-cli compile --fqbn unsignedio:avr:rnode -e
|
||||
cp build/unsignedio.avr.rnode/RNode_Firmware.ino.hex Release/rnode_firmware.hex
|
||||
rm -r build
|
||||
|
||||
release-tbeam:
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x01\""
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_tbeam.boot_app0
|
||||
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.bin build/rnode_firmware_tbeam.bin
|
||||
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_tbeam.bootloader
|
||||
|
|
@ -204,7 +204,7 @@ release-tbeam:
|
|||
rm -r build
|
||||
|
||||
release-lora32_v10:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DMODEM=0x01\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v10.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v10.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v10.bootloader
|
||||
|
|
@ -213,7 +213,7 @@ release-lora32_v10:
|
|||
rm -r build
|
||||
|
||||
release-lora32_v20:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DMODEM=0x01\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v20.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v20.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v20.bootloader
|
||||
|
|
@ -222,7 +222,7 @@ release-lora32_v20:
|
|||
rm -r build
|
||||
|
||||
release-lora32_v21:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DMODEM=0x01\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v21.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader
|
||||
|
|
@ -231,7 +231,7 @@ release-lora32_v21:
|
|||
rm -r build
|
||||
|
||||
release-lora32_v10_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\" \"-DMODEM=0x01\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v10.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v10.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v10.bootloader
|
||||
|
|
@ -240,7 +240,7 @@ release-lora32_v10_extled:
|
|||
rm -r build
|
||||
|
||||
release-lora32_v20_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\" \"-DMODEM=0x01\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v20.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v20.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v20.bootloader
|
||||
|
|
@ -249,7 +249,7 @@ release-lora32_v20_extled:
|
|||
rm -r build
|
||||
|
||||
release-lora32_v21_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\" \"-DMODEM=0x01\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v21.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader
|
||||
|
|
@ -258,7 +258,7 @@ release-lora32_v21_extled:
|
|||
rm -r build
|
||||
|
||||
release-lora32_v21_tcxo:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\" \"-DMODEM=0x01\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v21.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader
|
||||
|
|
@ -267,7 +267,7 @@ release-lora32_v21_tcxo:
|
|||
rm -r build
|
||||
|
||||
release-heltec32_v2:
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DMODEM=0x01\""
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v2.boot_app0
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bin build/rnode_firmware_heltec32v2.bin
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader
|
||||
|
|
@ -276,7 +276,7 @@ release-heltec32_v2:
|
|||
rm -r build
|
||||
|
||||
release-heltec32_v2_extled:
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\" \"-DMODEM=0x01\""
|
||||
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v2.boot_app0
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bin build/rnode_firmware_heltec32v2.bin
|
||||
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader
|
||||
|
|
@ -285,7 +285,7 @@ release-heltec32_v2_extled:
|
|||
rm -r build
|
||||
|
||||
release-rnode_ng_20:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\" \"-DMODEM=0x01\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_ng20.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_ng20.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_ng20.bootloader
|
||||
|
|
@ -294,7 +294,7 @@ release-rnode_ng_20:
|
|||
rm -r build
|
||||
|
||||
release-rnode_ng_21:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\" \"-DMODEM=0x01\""
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_ng21.boot_app0
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_ng21.bin
|
||||
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_ng21.bootloader
|
||||
|
|
@ -302,8 +302,17 @@ release-rnode_ng_21:
|
|||
zip --junk-paths ./Release/rnode_firmware_ng21.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_ng21.boot_app0 build/rnode_firmware_ng21.bin build/rnode_firmware_ng21.bootloader build/rnode_firmware_ng21.partitions
|
||||
rm -r build
|
||||
|
||||
release-rnode_ng_22:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_ng22.boot_app0
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_ng22.bin
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_ng22.bootloader
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_ng22.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_ng22.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_ng22.boot_app0 build/rnode_firmware_ng22.bin build/rnode_firmware_ng22.bootloader build/rnode_firmware_ng22.partitions
|
||||
rm -r build
|
||||
|
||||
release-featheresp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\" \"-DMODEM=0x01\""
|
||||
arduino-cli compile --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_featheresp32.boot_app0
|
||||
cp build/esp32.esp32.featheresp32/RNode_Firmware.ino.bin build/rnode_firmware_featheresp32.bin
|
||||
cp build/esp32.esp32.featheresp32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_featheresp32.bootloader
|
||||
|
|
@ -312,7 +321,7 @@ release-featheresp32:
|
|||
rm -r build
|
||||
|
||||
release-genericesp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\" \"-DMODEM=0x01\""
|
||||
arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_esp32_generic.boot_app0
|
||||
cp build/esp32.esp32.esp32/RNode_Firmware.ino.bin build/rnode_firmware_esp32_generic.bin
|
||||
cp build/esp32.esp32.esp32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_esp32_generic.bootloader
|
||||
|
|
|
|||
4
ROM.h
4
ROM.h
|
|
@ -25,6 +25,8 @@
|
|||
#define PRODUCT_T32_20 0xB0
|
||||
#define PRODUCT_T32_21 0xB1
|
||||
#define PRODUCT_H32_V2 0xC0
|
||||
#define MODEL_A1 0xA1
|
||||
#define MODEL_A6 0xA6
|
||||
#define MODEL_A4 0xA4
|
||||
#define MODEL_A9 0xA9
|
||||
#define MODEL_A3 0xA3
|
||||
|
|
@ -48,7 +50,7 @@
|
|||
#define ADDR_MODEL 0x01
|
||||
#define ADDR_HW_REV 0x02
|
||||
#define ADDR_SERIAL 0x03
|
||||
#define ADDR_MADE 0x07
|
||||
#define ADDR_MADE 0x07
|
||||
#define ADDR_CHKSUM 0x0B
|
||||
#define ADDR_SIGNATURE 0x1B
|
||||
#define ADDR_INFO_LOCK 0x9B
|
||||
|
|
|
|||
Binary file not shown.
|
|
@ -1034,9 +1034,11 @@ int getTxPower() {
|
|||
|
||||
void setTXPower() {
|
||||
if (radio_online) {
|
||||
if (model == MODEL_A1) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_A2) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_A3) LoRa->setTxPower(lora_txp, PA_OUTPUT_RFO_PIN);
|
||||
if (model == MODEL_A4) LoRa->setTxPower(lora_txp, PA_OUTPUT_RFO_PIN);
|
||||
if (model == MODEL_A6) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_A7) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_A8) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_A9) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
|
|
@ -1252,6 +1254,8 @@ bool eeprom_model_valid() {
|
|||
if (model == MODEL_A3 || model == MODEL_A8) {
|
||||
#elif BOARD_MODEL == BOARD_RNODE_NG_21
|
||||
if (model == MODEL_A2 || model == MODEL_A7) {
|
||||
#elif BOARD_MODEL == BOARD_RNODE_NG_22
|
||||
if (model == MODEL_A1 || model == MODEL_A6) {
|
||||
#elif BOARD_MODEL == BOARD_HMBRW
|
||||
if (model == MODEL_FF || model == MODEL_FE) {
|
||||
#elif BOARD_MODEL == BOARD_TBEAM
|
||||
|
|
|
|||
24
sx126x.cpp
24
sx126x.cpp
|
|
@ -5,6 +5,7 @@
|
|||
// Obviously still under the MIT license.
|
||||
|
||||
#include "sx126x.h"
|
||||
#include "Boards.h"
|
||||
|
||||
#define MCU_1284P 0x91
|
||||
#define MCU_2560 0x92
|
||||
|
|
@ -29,7 +30,9 @@
|
|||
#endif
|
||||
|
||||
#if MCU_VARIANT == MCU_ESP32
|
||||
#include "soc/rtc_wdt.h"
|
||||
#if MCU_VARIANT == MCU_ESP32 and !defined(CONFIG_IDF_TARGET_ESP32S3)
|
||||
#include "soc/rtc_wdt.h"
|
||||
#endif
|
||||
#define ISR_VECT IRAM_ATTR
|
||||
#else
|
||||
#define ISR_VECT
|
||||
|
|
@ -83,8 +86,11 @@
|
|||
#define XTAL_FREQ_6X (double)32000000
|
||||
#define FREQ_DIV_6X (double)pow(2.0, 25.0)
|
||||
#define FREQ_STEP_6X (double)(XTAL_FREQ_6X / FREQ_DIV_6X)
|
||||
extern SPIClass spiModem;
|
||||
#define SPI spiModem
|
||||
|
||||
#if defined(NRF52840_XXAA)
|
||||
extern SPIClass spiModem;
|
||||
#define SPI spiModem
|
||||
#endif
|
||||
|
||||
extern SPIClass SPI;
|
||||
|
||||
|
|
@ -120,24 +126,34 @@ bool sx126x::preInit() {
|
|||
// set SS high
|
||||
digitalWrite(_ss, HIGH);
|
||||
|
||||
SPI.begin();
|
||||
Serial.println("SPI INIT");
|
||||
#if BOARD_MODEL == BOARD_RNODE_NG_22
|
||||
SPI.begin(pin_sclk, pin_miso, pin_mosi, pin_cs);
|
||||
#else
|
||||
SPI.begin();
|
||||
#endif
|
||||
Serial.println("DONE");
|
||||
|
||||
// check version (retry for up to 2 seconds)
|
||||
long start = millis();
|
||||
uint8_t syncmsb;
|
||||
uint8_t synclsb;
|
||||
Serial.println("TRYING REGISTER READ");
|
||||
while (((millis() - start) < 2000) && (millis() >= start)) {
|
||||
syncmsb = readRegister(REG_SYNC_WORD_MSB_6X);
|
||||
synclsb = readRegister(REG_SYNC_WORD_LSB_6X);
|
||||
if ( uint16_t(syncmsb << 8 | synclsb) == 0x1424 || uint16_t(syncmsb << 8 | synclsb) == 0x4434) {
|
||||
Serial.println("CORRECT VALUE RETURNED");
|
||||
break;
|
||||
}
|
||||
delay(100);
|
||||
}
|
||||
if ( uint16_t(syncmsb << 8 | synclsb) != 0x1424 && uint16_t(syncmsb << 8 | synclsb) != 0x4434) {
|
||||
Serial.println("REG READ FAILED");
|
||||
return false;
|
||||
}
|
||||
|
||||
Serial.println("MODEM PREINIT SUCCESS");
|
||||
_preinit_done = true;
|
||||
return true;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -5,6 +5,7 @@
|
|||
// Obviously still under the MIT license.
|
||||
|
||||
#include "sx127x.h"
|
||||
#include "Boards.h"
|
||||
|
||||
#define MCU_1284P 0x91
|
||||
#define MCU_2560 0x92
|
||||
|
|
@ -29,7 +30,9 @@
|
|||
#endif
|
||||
|
||||
#if MCU_VARIANT == MCU_ESP32
|
||||
#include "soc/rtc_wdt.h"
|
||||
#if MCU_VARIANT == MCU_ESP32 and !defined(CONFIG_IDF_TARGET_ESP32S3)
|
||||
#include "soc/rtc_wdt.h"
|
||||
#endif
|
||||
#define ISR_VECT IRAM_ATTR
|
||||
#else
|
||||
#define ISR_VECT
|
||||
|
|
|
|||
11
sx128x.cpp
11
sx128x.cpp
|
|
@ -5,6 +5,7 @@
|
|||
// Obviously still under the MIT license.
|
||||
|
||||
#include "sx128x.h"
|
||||
#include "Boards.h"
|
||||
|
||||
#define MCU_1284P 0x91
|
||||
#define MCU_2560 0x92
|
||||
|
|
@ -29,7 +30,9 @@
|
|||
#endif
|
||||
|
||||
#if MCU_VARIANT == MCU_ESP32
|
||||
#include "soc/rtc_wdt.h"
|
||||
#if MCU_VARIANT == MCU_ESP32 and !defined(CONFIG_IDF_TARGET_ESP32S3)
|
||||
#include "soc/rtc_wdt.h"
|
||||
#endif
|
||||
#define ISR_VECT IRAM_ATTR
|
||||
#else
|
||||
#define ISR_VECT
|
||||
|
|
@ -77,8 +80,10 @@
|
|||
#define FREQ_DIV_8X (double)pow(2.0, 18.0)
|
||||
#define FREQ_STEP_8X (double)(XTAL_FREQ_8X / FREQ_DIV_8X)
|
||||
|
||||
extern SPIClass spiModem;
|
||||
#define SPI spiModem
|
||||
#if defined(NRF52840_XXAA)
|
||||
extern SPIClass spiModem;
|
||||
#define SPI spiModem
|
||||
#endif
|
||||
|
||||
extern SPIClass SPI;
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue