614 lines
18 KiB
C
614 lines
18 KiB
C
// Copyright (C) 2024, Mark Qvist
|
|
|
|
// This program is free software: you can redistribute it and/or modify
|
|
// it under the terms of the GNU General Public License as published by
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
|
|
// This program is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
// GNU General Public License for more details.
|
|
|
|
// You should have received a copy of the GNU General Public License
|
|
// along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
|
|
#include "Modem.h"
|
|
|
|
#ifndef BOARDS_H
|
|
#define BOARDS_H
|
|
|
|
#define PLATFORM_AVR 0x90
|
|
#define PLATFORM_ESP32 0x80
|
|
#define PLATFORM_NRF52 0x70
|
|
|
|
#define MCU_1284P 0x91
|
|
#define MCU_2560 0x92
|
|
#define MCU_ESP32 0x81
|
|
#define MCU_NRF52 0x71
|
|
|
|
// Products, boards and models ////
|
|
#define PRODUCT_RNODE 0x03 // RNode devices
|
|
#define BOARD_RNODE 0x31 // Original v1.0 RNode
|
|
#define MODEL_A4 0xA4 // RNode v1.0, 433 MHz
|
|
#define MODEL_A9 0xA9 // RNode v1.0, 868 MHz
|
|
|
|
#define BOARD_RNODE_NG_20 0x40 // RNode hardware revision v2.0
|
|
#define MODEL_A3 0xA3 // RNode v2.0, 433 MHz
|
|
#define MODEL_A8 0xA8 // RNode v2.0, 868 MHz
|
|
|
|
#define BOARD_RNODE_NG_21 0x41 // RNode hardware revision v2.1
|
|
#define MODEL_A2 0xA2 // RNode v2.1, 433 MHz
|
|
#define MODEL_A7 0xA7 // RNode v2.1, 868 MHz
|
|
|
|
#define BOARD_RNODE_NG_22 0x42 // RNode hardware revision v2.2 (T3S3)
|
|
#define MODEL_A1 0xA1 // RNode v2.2, 433 MHz with SX1268
|
|
#define MODEL_A5 0xA5 // RNode v2.2, 433 MHz with SX1278
|
|
#define MODEL_A6 0xA6 // RNode v2.2, 868 MHz with SX1262
|
|
#define MODEL_AA 0xAA // RNode v2.2, 868 MHz with SX1276
|
|
|
|
#define PRODUCT_TBEAM 0xE0 // T-Beam devices
|
|
#define BOARD_TBEAM 0x33
|
|
#define MODEL_E4 0xE4 // T-Beam SX1278, 433 Mhz
|
|
#define MODEL_E9 0xE9 // T-Beam SX1276, 868 Mhz
|
|
#define MODEL_E3 0xE3 // T-Beam SX1268, 433 Mhz
|
|
#define MODEL_E8 0xE8 // T-Beam SX1262, 868 Mhz
|
|
|
|
#define PRODUCT_TDECK_V1 0xD0
|
|
#define BOARD_TDECK 0x3B
|
|
#define MODEL_D4 0xD4 // LilyGO T-Deck, 433 MHz
|
|
#define MODEL_D9 0xD9 // LilyGO T-Deck, 868 MHz
|
|
|
|
#define PRODUCT_TBEAM_S_V1 0xEA
|
|
#define BOARD_TBEAM_S_V1 0x3D
|
|
#define MODEL_DB 0xDB // LilyGO T-Beam Supreme, 433 MHz
|
|
#define MODEL_DC 0xDC // LilyGO T-Beam Supreme, 868 MHz
|
|
|
|
#define PRODUCT_T32_10 0xB2
|
|
#define BOARD_LORA32_V1_0 0x39
|
|
#define MODEL_BA 0xBA // LilyGO T3 v1.0, 433 MHz
|
|
#define MODEL_BB 0xBB // LilyGO T3 v1.0, 868 MHz
|
|
|
|
#define PRODUCT_T32_20 0xB0
|
|
#define BOARD_LORA32_V2_0 0x36
|
|
#define MODEL_B3 0xB3 // LilyGO T3 v2.0, 433 MHz
|
|
#define MODEL_B8 0xB8 // LilyGO T3 v2.0, 868 MHz
|
|
|
|
#define PRODUCT_T32_21 0xB1
|
|
#define BOARD_LORA32_V2_1 0x37
|
|
#define MODEL_B4 0xB4 // LilyGO T3 v2.1, 433 MHz
|
|
#define MODEL_B9 0xB9 // LilyGO T3 v2.1, 868 MHz
|
|
|
|
#define PRODUCT_H32_V2 0xC0 // Board code 0x38
|
|
#define BOARD_HELTEC32_V2 0x38
|
|
#define MODEL_C4 0xC4 // Heltec Lora32 v2, 433 MHz
|
|
#define MODEL_C9 0xC9 // Heltec Lora32 v2, 868 MHz
|
|
|
|
#define PRODUCT_H32_V3 0xC1
|
|
#define BOARD_HELTEC32_V3 0x3A
|
|
#define MODEL_C5 0xC5 // Heltec Lora32 v3, 433 MHz
|
|
#define MODEL_CA 0xCA // Heltec Lora32 v3, 868 MHz
|
|
|
|
#define PRODUCT_RAK4631 0x10
|
|
#define BOARD_RAK4631 0x51
|
|
#define MODEL_11 0x11 // RAK4631, 433 Mhz
|
|
#define MODEL_12 0x12 // RAK4631, 868 Mhz
|
|
|
|
#define PRODUCT_HMBRW 0xF0
|
|
#define BOARD_HMBRW 0x32
|
|
#define BOARD_HUZZAH32 0x34
|
|
#define BOARD_GENERIC_ESP32 0x35
|
|
#define BOARD_GENERIC_NRF52 0x50
|
|
#define MODEL_FE 0xFE // Homebrew board, max 17dBm output power
|
|
#define MODEL_FF 0xFF // Homebrew board, max 14dBm output power
|
|
|
|
#if defined(__AVR_ATmega1284P__)
|
|
#define PLATFORM PLATFORM_AVR
|
|
#define MCU_VARIANT MCU_1284P
|
|
#elif defined(__AVR_ATmega2560__)
|
|
#define PLATFORM PLATFORM_AVR
|
|
#define MCU_VARIANT MCU_2560
|
|
#elif defined(ESP32)
|
|
#define PLATFORM PLATFORM_ESP32
|
|
#define MCU_VARIANT MCU_ESP32
|
|
#elif defined(NRF52840_XXAA)
|
|
#include <variant.h>
|
|
#define PLATFORM PLATFORM_NRF52
|
|
#define MCU_VARIANT MCU_NRF52
|
|
#else
|
|
#error "The firmware cannot be compiled for the selected MCU variant"
|
|
#endif
|
|
|
|
#ifndef MODEM
|
|
#if BOARD_MODEL == BOARD_RAK4631
|
|
#define MODEM SX1262
|
|
#elif BOARD_MODEL == BOARD_GENERIC_NRF52
|
|
#define MODEM SX1262
|
|
#else
|
|
#define MODEM SX1276
|
|
#endif
|
|
#endif
|
|
|
|
#define HAS_DISPLAY false
|
|
#define HAS_BLUETOOTH false
|
|
#define HAS_BLE false
|
|
#define HAS_TCXO false
|
|
#define HAS_PMU false
|
|
#define HAS_NP false
|
|
#define HAS_EEPROM false
|
|
#define HAS_INPUT false
|
|
#define HAS_SLEEP false
|
|
#define PIN_DISP_SLEEP -1
|
|
#define VALIDATE_FIRMWARE true
|
|
|
|
#if defined(ENABLE_TCXO)
|
|
#define HAS_TCXO true
|
|
#endif
|
|
|
|
#if MCU_VARIANT == MCU_1284P
|
|
const int pin_cs = 4;
|
|
const int pin_reset = 3;
|
|
const int pin_dio = 2;
|
|
const int pin_led_rx = 12;
|
|
const int pin_led_tx = 13;
|
|
|
|
#define BOARD_MODEL BOARD_RNODE
|
|
#define HAS_EEPROM true
|
|
#define CONFIG_UART_BUFFER_SIZE 6144
|
|
#define CONFIG_QUEUE_SIZE 6144
|
|
#define CONFIG_QUEUE_MAX_LENGTH 200
|
|
#define EEPROM_SIZE 4096
|
|
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
|
|
|
#elif MCU_VARIANT == MCU_2560
|
|
const int pin_cs = 5;
|
|
const int pin_reset = 4;
|
|
const int pin_dio = 2;
|
|
const int pin_led_rx = 12;
|
|
const int pin_led_tx = 13;
|
|
|
|
#define BOARD_MODEL BOARD_HMBRW
|
|
#define HAS_EEPROM true
|
|
#define CONFIG_UART_BUFFER_SIZE 768
|
|
#define CONFIG_QUEUE_SIZE 5120
|
|
#define CONFIG_QUEUE_MAX_LENGTH 24
|
|
#define EEPROM_SIZE 4096
|
|
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
|
|
|
#elif MCU_VARIANT == MCU_ESP32
|
|
|
|
// Board models for ESP32 based builds are
|
|
// defined by the build target in the makefile.
|
|
// If you are not using make to compile this
|
|
// firmware, you can manually define model here.
|
|
//
|
|
// #define BOARD_MODEL BOARD_GENERIC_ESP32
|
|
#define CONFIG_UART_BUFFER_SIZE 6144
|
|
#define CONFIG_QUEUE_SIZE 6144
|
|
#define CONFIG_QUEUE_MAX_LENGTH 200
|
|
|
|
#define EEPROM_SIZE 1024
|
|
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
|
|
|
#define GPS_BAUD_RATE 9600
|
|
#define PIN_GPS_TX 12
|
|
#define PIN_GPS_RX 34
|
|
|
|
#if BOARD_MODEL == BOARD_GENERIC_ESP32
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 4;
|
|
const int pin_reset = 36;
|
|
const int pin_dio = 39;
|
|
const int pin_led_rx = 14;
|
|
const int pin_led_tx = 32;
|
|
|
|
#elif BOARD_MODEL == BOARD_TBEAM
|
|
#define HAS_DISPLAY true
|
|
#define HAS_PMU true
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_SD false
|
|
#define HAS_EEPROM true
|
|
#define I2C_SDA 21
|
|
#define I2C_SCL 22
|
|
#define PMU_IRQ 35
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 23;
|
|
const int pin_led_rx = 2;
|
|
const int pin_led_tx = 4;
|
|
|
|
#if MODEM == SX1262
|
|
#define HAS_TCXO true
|
|
#define HAS_BUSY true
|
|
#define DIO2_AS_RF_SWITCH true
|
|
const int pin_busy = 32;
|
|
const int pin_dio = 33;
|
|
const int pin_tcxo_enable = -1;
|
|
#else
|
|
const int pin_dio = 26;
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_HUZZAH32
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 4;
|
|
const int pin_reset = 36;
|
|
const int pin_dio = 39;
|
|
const int pin_led_rx = 14;
|
|
const int pin_led_tx = 32;
|
|
|
|
#elif BOARD_MODEL == BOARD_LORA32_V1_0
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 14;
|
|
const int pin_dio = 26;
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 25;
|
|
const int pin_led_tx = 2;
|
|
#else
|
|
const int pin_led_rx = 2;
|
|
const int pin_led_tx = 2;
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_LORA32_V2_0
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 12;
|
|
const int pin_dio = 26;
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 2;
|
|
const int pin_led_tx = 0;
|
|
#else
|
|
const int pin_led_rx = 22;
|
|
const int pin_led_tx = 22;
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_LORA32_V2_1
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_PMU true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 23;
|
|
const int pin_dio = 26;
|
|
#if HAS_TCXO == true
|
|
const int pin_tcxo_enable = 33;
|
|
#endif
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 15;
|
|
const int pin_led_tx = 4;
|
|
#else
|
|
const int pin_led_rx = 25;
|
|
const int pin_led_tx = 25;
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_HELTEC32_V2
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 14;
|
|
const int pin_dio = 26;
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 36;
|
|
const int pin_led_tx = 37;
|
|
#else
|
|
const int pin_led_rx = 25;
|
|
const int pin_led_tx = 25;
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_HELTEC32_V3
|
|
#define IS_ESP32S3 true
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH false
|
|
#define HAS_BLE true
|
|
#define HAS_PMU true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
#define HAS_INPUT true
|
|
#define HAS_SLEEP true
|
|
#define PIN_WAKEUP GPIO_NUM_0
|
|
#define WAKEUP_LEVEL 0
|
|
|
|
const int pin_btn_usr1 = 0;
|
|
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 13;
|
|
const int pin_led_tx = 14;
|
|
#else
|
|
const int pin_led_rx = 35;
|
|
const int pin_led_tx = 35;
|
|
#endif
|
|
|
|
#define MODEM SX1262
|
|
#define HAS_TCXO true
|
|
const int pin_tcxo_enable = -1;
|
|
#define HAS_BUSY true
|
|
#define DIO2_AS_RF_SWITCH true
|
|
|
|
// Following pins are for the SX1262
|
|
const int pin_cs = 8;
|
|
const int pin_busy = 13;
|
|
const int pin_dio = 14;
|
|
const int pin_reset = 12;
|
|
const int pin_mosi = 10;
|
|
const int pin_miso = 11;
|
|
const int pin_sclk = 9;
|
|
|
|
#elif BOARD_MODEL == BOARD_RNODE_NG_20
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_NP true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 12;
|
|
const int pin_dio = 26;
|
|
const int pin_np = 4;
|
|
#if HAS_NP == false
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 2;
|
|
const int pin_led_tx = 0;
|
|
#else
|
|
const int pin_led_rx = 22;
|
|
const int pin_led_tx = 22;
|
|
#endif
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_RNODE_NG_21
|
|
#define HAS_DISPLAY true
|
|
#define HAS_BLUETOOTH true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_PMU true
|
|
#define HAS_NP true
|
|
#define HAS_SD false
|
|
#define HAS_EEPROM true
|
|
const int pin_cs = 18;
|
|
const int pin_reset = 23;
|
|
const int pin_dio = 26;
|
|
const int pin_np = 12;
|
|
const int pin_dac = 25;
|
|
const int pin_adc = 34;
|
|
const int SD_MISO = 2;
|
|
const int SD_MOSI = 15;
|
|
const int SD_CLK = 14;
|
|
const int SD_CS = 13;
|
|
#if HAS_NP == false
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 12;
|
|
const int pin_led_tx = 4;
|
|
#else
|
|
const int pin_led_rx = 25;
|
|
const int pin_led_tx = 25;
|
|
#endif
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_RNODE_NG_22
|
|
#define IS_ESP32S3 true
|
|
#define HAS_DISPLAY true
|
|
#define HAS_CONSOLE false
|
|
#define HAS_BLUETOOTH false
|
|
#define HAS_BLE true
|
|
#define HAS_PMU true
|
|
#define HAS_NP false
|
|
#define HAS_SD false
|
|
#define HAS_EEPROM true
|
|
|
|
#define HAS_INPUT true
|
|
#define HAS_SLEEP true
|
|
#define PIN_WAKEUP GPIO_NUM_0
|
|
#define WAKEUP_LEVEL 0
|
|
const int pin_btn_usr1 = 0;
|
|
|
|
const int pin_cs = 7;
|
|
const int pin_reset = 8;
|
|
const int pin_sclk = 5;
|
|
const int pin_mosi = 6;
|
|
const int pin_miso = 3;
|
|
const int pin_dio = 9;
|
|
|
|
#if MODEM == SX1262
|
|
#define DIO2_AS_RF_SWITCH true
|
|
#define HAS_BUSY true
|
|
#define HAS_TCXO true
|
|
const int pin_busy = 34;
|
|
const int pin_dio = 33;
|
|
const int pin_tcxo_enable = -1;
|
|
#endif
|
|
|
|
const int pin_np = 38;
|
|
const int pin_dac = 25;
|
|
const int pin_adc = 1;
|
|
|
|
const int SD_MISO = 2;
|
|
const int SD_MOSI = 11;
|
|
const int SD_CLK = 14;
|
|
const int SD_CS = 13;
|
|
|
|
#if HAS_NP == false
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 37;
|
|
const int pin_led_tx = 37;
|
|
#else
|
|
const int pin_led_rx = 37;
|
|
const int pin_led_tx = 37;
|
|
#endif
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_TDECK
|
|
#define IS_ESP32S3 true
|
|
#define MODEM SX1262
|
|
#define DIO2_AS_RF_SWITCH true
|
|
#define HAS_BUSY true
|
|
#define HAS_TCXO true
|
|
|
|
#define HAS_DISPLAY false
|
|
#define HAS_CONSOLE false
|
|
#define HAS_BLUETOOTH false
|
|
#define HAS_BLE true
|
|
#define HAS_PMU true
|
|
#define HAS_NP false
|
|
#define HAS_SD false
|
|
#define HAS_EEPROM true
|
|
|
|
#define HAS_INPUT true
|
|
#define HAS_SLEEP true
|
|
#define PIN_WAKEUP GPIO_NUM_0
|
|
#define WAKEUP_LEVEL 0
|
|
|
|
const int pin_poweron = 10;
|
|
const int pin_btn_usr1 = 0;
|
|
|
|
const int pin_cs = 9;
|
|
const int pin_reset = 17;
|
|
const int pin_sclk = 40;
|
|
const int pin_mosi = 41;
|
|
const int pin_miso = 38;
|
|
const int pin_tcxo_enable = -1;
|
|
const int pin_dio = 45;
|
|
const int pin_busy = 13;
|
|
|
|
const int SD_MISO = 38;
|
|
const int SD_MOSI = 41;
|
|
const int SD_CLK = 40;
|
|
const int SD_CS = 39;
|
|
|
|
const int DISPLAY_DC = 11;
|
|
const int DISPLAY_CS = 12;
|
|
const int DISPLAY_MISO = 38;
|
|
const int DISPLAY_MOSI = 41;
|
|
const int DISPLAY_CLK = 40;
|
|
const int DISPLAY_BL_PIN = 42;
|
|
|
|
#if HAS_NP == false
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 43;
|
|
const int pin_led_tx = 43;
|
|
#else
|
|
const int pin_led_rx = 43;
|
|
const int pin_led_tx = 43;
|
|
#endif
|
|
#endif
|
|
|
|
#elif BOARD_MODEL == BOARD_TBEAM_S_V1
|
|
#define IS_ESP32S3 true
|
|
#define MODEM SX1262
|
|
#define DIO2_AS_RF_SWITCH true
|
|
#define HAS_BUSY true
|
|
#define HAS_TCXO true
|
|
|
|
#define HAS_DISPLAY true
|
|
#define HAS_CONSOLE true
|
|
#define HAS_BLUETOOTH false
|
|
#define HAS_BLE true
|
|
#define HAS_PMU true
|
|
#define HAS_NP false
|
|
#define HAS_SD false
|
|
#define HAS_EEPROM true
|
|
|
|
#define HAS_INPUT true
|
|
#define HAS_SLEEP false
|
|
|
|
#define PMU_IRQ 40
|
|
#define I2C_SCL 41
|
|
#define I2C_SDA 42
|
|
|
|
const int pin_btn_usr1 = 0;
|
|
|
|
const int pin_cs = 10;
|
|
const int pin_reset = 5;
|
|
const int pin_sclk = 12;
|
|
const int pin_mosi = 11;
|
|
const int pin_miso = 13;
|
|
const int pin_tcxo_enable = -1;
|
|
const int pin_dio = 1;
|
|
const int pin_busy = 4;
|
|
|
|
const int SD_MISO = 37;
|
|
const int SD_MOSI = 35;
|
|
const int SD_CLK = 36;
|
|
const int SD_CS = 47;
|
|
|
|
const int IMU_CS = 34;
|
|
|
|
#if HAS_NP == false
|
|
#if defined(EXTERNAL_LEDS)
|
|
const int pin_led_rx = 43;
|
|
const int pin_led_tx = 43;
|
|
#else
|
|
const int pin_led_rx = 43;
|
|
const int pin_led_tx = 43;
|
|
#endif
|
|
#endif
|
|
|
|
#else
|
|
#error An unsupported ESP32 board was selected. Cannot compile RNode firmware.
|
|
#endif
|
|
|
|
#elif MCU_VARIANT == MCU_NRF52
|
|
#if BOARD_MODEL == BOARD_RAK4631
|
|
#define HAS_EEPROM false
|
|
#define HAS_DISPLAY false
|
|
#define HAS_BLUETOOTH false
|
|
#define HAS_BLE true
|
|
#define HAS_CONSOLE false
|
|
#define HAS_PMU false
|
|
#define HAS_NP false
|
|
#define HAS_SD false
|
|
#define HAS_TCXO true
|
|
#define HAS_RF_SWITCH_RX_TX true
|
|
#define HAS_BUSY true
|
|
#define DIO2_AS_RF_SWITCH true
|
|
#define CONFIG_UART_BUFFER_SIZE 6144
|
|
#define CONFIG_QUEUE_SIZE 6144
|
|
#define CONFIG_QUEUE_MAX_LENGTH 200
|
|
#define EEPROM_SIZE 296
|
|
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
|
#define BLE_MANUFACTURER "RAK Wireless"
|
|
#define BLE_MODEL "RAK4640"
|
|
|
|
// Following pins are for the sx1262
|
|
const int pin_rxen = 37;
|
|
const int pin_reset = 38;
|
|
const int pin_cs = 42;
|
|
const int pin_sclk = 43;
|
|
const int pin_mosi = 44;
|
|
const int pin_miso = 45;
|
|
const int pin_busy = 46;
|
|
const int pin_dio = 47;
|
|
const int pin_led_rx = LED_BLUE;
|
|
const int pin_led_tx = LED_GREEN;
|
|
const int pin_tcxo_enable = -1;
|
|
|
|
#else
|
|
#error An unsupported nRF board was selected. Cannot compile RNode firmware.
|
|
#endif
|
|
|
|
#endif
|
|
|
|
#ifndef HAS_RF_SWITCH_RX_TX
|
|
const int pin_rxen = -1;
|
|
const int pin_txen = -1;
|
|
#endif
|
|
|
|
#ifndef HAS_BUSY
|
|
const int pin_busy = -1;
|
|
#endif
|
|
|
|
#ifndef DIO2_AS_RF_SWITCH
|
|
#define DIO2_AS_RF_SWITCH false
|
|
#endif
|
|
|
|
#endif
|