Reticulum Network Stack β

Reticulum is the cryptography-based networking stack for building local and wide-area networks with readily available hardware. It can operate even with very high latency and extremely low bandwidth. Reticulum allows you to build wide-area networks with off-the-shelf tools, and offers end-to-end encryption and connectivity, initiator anonymity, autoconfiguring cryptographically backed multi-hop transport, efficient addressing, unforgeable delivery acknowledgements and more.

The vision of Reticulum is to allow anyone to be their own network operator, and to make it cheap and easy to cover vast areas with a myriad of independent, inter-connectable and autonomous networks. Reticulum is not one network. It is a tool for building thousands of networks. Networks without kill-switches, surveillance, censorship and control. Networks that can freely interoperate, associate and disassociate with each other, and require no central oversight. Networks for human beings. Networks for the people.

Reticulum is a complete networking stack, and does not rely on IP or higher layers, but it is possible to use IP as the underlying carrier for Reticulum. It is therefore trivial to tunnel Reticulum over the Internet or private IP networks.

Having no dependencies on traditional networking stacks frees up overhead that has been used to implement a networking stack built directly on cryptographic principles, allowing resilience and stable functionality, even in open and trustless networks.

No kernel modules or drivers are required. Reticulum runs completely in userland, and can run on practically any system that runs Python 3.

Read The Manual

The full documentation for Reticulum is available at markqvist.github.io/Reticulum/manual/.

You can also download the Reticulum manual as a PDF or as an e-book in EPUB format.

For more info, see reticulum.network

Notable Features

• Coordination-less globally unique addressing and identification
• Fully self-configuring multi-hop routing
• Initiator anonymity, communicate without revealing your identity
• Asymmetric X25519 encryption and Ed25519 signatures as a basis for all communication
• Forward Secrecy with ephemeral Elliptic Curve Diffie-Hellman keys on Curve25519
• Reticulum uses the following format for encrypted tokens:
  • Keys are ephemeral and derived from an ECDH key exchange on Curve25519
  • AES-128 in CBC mode with PKCS7 padding
  • HMAC using SHA256 for authentication
  • IVs are generated through os.urandom()
• Unforgeable packet delivery confirmations
• A variety of supported interface types
• An intuitive and easy-to-use API
• Reliable and efficient transfer of arbitrary amounts of data
  • Reticulum can handle a few bytes of data or files of many gigabytes
  • Sequencing, transfer coordination and checksumming are automatic
  • The API is very easy to use, and provides transfer progress
• Lightweight, flexible and expandable Request/Response mechanism
• Efficient link establishment
  • Total cost of setting up an encrypted and verified link is only 3 packets, totalling 297 bytes
  • Low cost of keeping links open at only 0.44 bits per second
• Reliable sequential delivery with Channel and Buffer mechanisms

Roadmap

While Reticulum is already a fully featured and functional networking stack, many improvements and additions are actively being worked on, and planned for the future.

To learn more about the direction and future of Reticulum, please see the Development Roadmap.

Examples of Reticulum Applications

If you want to quickly get an idea of what Reticulum can do, take a look at the following resources.

• You can use the rnsh program to establish remote shell sessions over Reticulum.
• For an off-grid, encrypted and resilient mesh communications platform, see Nomad Network
• The Android, Linux and macOS app Sideband has a graphical interface and focuses on ease of use.
• LXMF is a distributed, delay and disruption tolerant message transfer protocol built on Reticulum

Where can Reticulum be used?

Over practically any medium that can support at least a half-duplex channel with 500 bits per second throughput, and an MTU of 500 bytes. Data radios, modems, LoRa radios, serial lines, AX.25 TNCs, amateur radio digital modes, WiFi and Ethernet devices, free-space optical links, and similar systems are all examples of the types of physical devices Reticulum can use.

An open-source LoRa-based interface called RNode has been designed specifically for use with Reticulum. It is possible to build yourself, or it can be purchased as a complete transceiver that just needs a USB connection to the host.

Reticulum can also be encapsulated over existing IP networks, so there's nothing stopping you from using it over wired Ethernet, your local WiFi network or the Internet, where it'll work just as well. In fact, one of the strengths of Reticulum is how easily it allows you to connect different mediums into a self-configuring, resilient and encrypted mesh, using any available mixture of available infrastructure.

As an example, it's possible to set up a Raspberry Pi connected to both a LoRa radio, a packet radio TNC and a WiFi network. Once the interfaces are configured, Reticulum will take care of the rest, and any device on the WiFi network can communicate with nodes on the LoRa and packet radio sides of the network, and vice versa.

How do I get started?

The best way to get started with the Reticulum Network Stack depends on what you want to do. For full details and examples, have a look at the Getting Started Fast section of the Reticulum Manual.

To simply install Reticulum and related utilities on your system, the easiest way is via pip. You can then start any program that uses Reticulum, or start Reticulum as a system service with the rnsd utility.

pip install rns

If you are using an operating system that blocks normal user package installation via pip, you can return pip to normal behaviour by editing the ~/.config/pip/pip.conf file, and adding the following directive in the [global] section:

[global]
break-system-packages = true

Alternatively, you can use the pipx tool to install Reticulum in an isolated environment:

pipx install rns

When first started, Reticulum will create a default configuration file, providing basic connectivity to other Reticulum peers that might be locally reachable. The default config file contains a few examples, and references for creating a more complex configuration.

If you have an old version of pip on your system, you may need to upgrade it first with pip install pip --upgrade. If you no not already have pip installed, you can install it using the package manager of your system with sudo apt install python3-pip or similar.

For more detailed examples on how to expand communication over many mediums such as packet radio or LoRa, serial ports, or over fast IP links and the Internet using the UDP and TCP interfaces, take a look at the Supported Interfaces section of the Reticulum Manual.

Included Utilities

Reticulum includes a range of useful utilities for managing your networks, viewing status and information, and other tasks. You can read more about these programs in the Included Utility Programs section of the Reticulum Manual.

• The system daemon rnsd for running Reticulum as an always-available service
• An interface status utility called rnstatus, that displays information about interfaces
• The path lookup and management tool rnpath letting you view and modify path tables
• A diagnostics tool called rnprobe for checking connectivity to destinations
• A simple file transfer program called rncp making it easy to transfer files between systems
• The identity management and encryption utility rnid let's you manage Identities and encrypt/decrypt files
• The remote command execution program rnx let's you run commands and programs and retrieve output from remote systems

All tools, including rnx and rncp, work reliably and well even over very low-bandwidth links like LoRa or Packet Radio. For full-featured remote shells over Reticulum, also have a look at the rnsh program.

Supported interface types and devices

Reticulum implements a range of generalised interface types that covers most of the communications hardware that Reticulum can run over. If your hardware is not supported, it's relatively simple to implement an interface class. I will gratefully accept pull requests for custom interfaces if they are generally useful.

Currently, the following interfaces are supported:

• Any Ethernet device
• LoRa using RNode
• Packet Radio TNCs (with or without AX.25)
• KISS-compatible hardware and software modems
• Any device with a serial port
• TCP over IP networks
• UDP over IP networks
• External programs via stdio or pipes
• Custom hardware via stdio or pipes

Performance

Reticulum targets a very wide usable performance envelope, but prioritises functionality and performance on low-bandwidth mediums. The goal is to provide a dynamic performance envelope from 250 bits per second, to 1 gigabit per second on normal hardware.

Currently, the usable performance envelope is approximately 500 bits per second to 20 megabits per second, with physical mediums faster than that not being saturated. Performance beyond the current level is intended for future upgrades, but not highly prioritised at this point in time.

Current Status

Reticulum should currently be considered beta software. All core protocol features are implemented and functioning, but additions will probably occur as real-world use is explored. There will be bugs. The API and wire-format can be considered relatively stable at the moment, but could change if warranted.

Dependencies

The installation of the default rns package requires the dependencies listed below. Almost all systems and distributions have readily available packages for these dependencies, and when the rns package is installed with pip, they will be downloaded and installed as well.

• PyCA/cryptography
• pyserial

On more unusual systems, and in some rare cases, it might not be possible to install or even compile one or more of the above modules. In such situations, you can use the rnspure package instead, which require no external dependencies for installation. Please note that the contents of the rns and rnspure packages are identical. The only difference is that the rnspure package lists no dependencies required for installation.

No matter how Reticulum is installed and started, it will load external dependencies only if they are needed and available. If for example you want to use Reticulum on a system that cannot support pyserial, it is perfectly possible to do so using the rnspure package, but Reticulum will not be able to use serial-based interfaces. All other available modules will still be loaded when needed.

Please Note! If you use the rnspure package to run Reticulum on systems that do not support PyCA/cryptography, it is important that you read and understand the Cryptographic Primitives section of this document.

Public Testnet

If you just want to get started experimenting without building any physical networks, you are welcome to join the Unsigned.io RNS Testnet. The testnet is just that, an informal network for testing and experimenting. It will be up most of the time, and anyone can join, but it also means that there's no guarantees for service availability.

The testnet runs the very latest version of Reticulum (often even a short while before it is publicly released). Sometimes experimental versions of Reticulum might be deployed to nodes on the testnet, which means strange behaviour might occur. If none of that scares you, you can join the testnet via either TCP or I2P. Just add one of the following interfaces to your Reticulum configuration file:

# TCP/IP interface to the RNS Amsterdam Hub
  [[RNS Testnet Amsterdam]]
    type = TCPClientInterface
    enabled = yes
    target_host = amsterdam.connect.reticulum.network
    target_port = 4965

# TCP/IP interface to the BetweenTheBorders Hub (community-provided)
  [[RNS Testnet BetweenTheBorders]]
    type = TCPClientInterface
    enabled = yes
    target_host = betweentheborders.com
    target_port = 4242

# Interface to Testnet I2P Hub
  [[RNS Testnet I2P Hub]]
    type = I2PInterface
    enabled = yes
    peers = g3br23bvx3lq5uddcsjii74xgmn6y5q325ovrkq2zw2wbzbqgbuq.b32.i2p

The testnet also contains a number of Nomad Network nodes, and LXMF propagation nodes.

Support Reticulum

You can help support the continued development of open, free and private communications systems by donating via one of the following channels:

• Monero:

 84FpY1QbxHcgdseePYNmhTHcrgMX4nFfBYtz2GKYToqHVVhJp8Eaw1Z1EedRnKD19b3B8NiLCGVxzKV17UMmmeEsCrPyA5w

• Ethereum

  0x81F7B979fEa6134bA9FD5c701b3501A2e61E897a
  

• Bitcoin

  3CPmacGm34qYvR6XWLVEJmi2aNe3PZqUuq
  

• Ko-Fi: https://ko-fi.com/markqvist

Are certain features in the development roadmap are important to you or your organisation? Make them a reality quickly by sponsoring their implementation.

Cryptographic Primitives

Reticulum uses a simple suite of efficient, strong and modern cryptographic primitives, with widely available implementations that can be used both on general-purpose CPUs and on microcontrollers. The necessary primitives are:

• Ed25519 for signatures
• X22519 for ECDH key exchanges
• HKDF for key derivation
• Modified Fernet for encrypted tokens
  • AES-128 in CBC mode
  • HMAC for message authentication
  • No Fernet version and timestamp fields
• SHA-256
• SHA-512

In the default installation configuration, the X25519, Ed25519 and AES-128-CBC primitives are provided by OpenSSL (via the PyCA/cryptography package). The hashing functions SHA-256 and SHA-512 are provided by the standard Python hashlib. The HKDF, HMAC, Fernet primitives, and the PKCS7 padding function are always provided by the following internal implementations:

• HKDF.py
• HMAC.py
• Fernet.py
• PKCS7.py

Reticulum also includes a complete implementation of all necessary primitives in pure Python. If OpenSSL & PyCA are not available on the system when Reticulum is started, Reticulum will instead use the internal pure-python primitives. A trivial consequence of this is performance, with the OpenSSL backend being much faster. The most important consequence however, is the potential loss of security by using primitives that has not seen the same amount of scrutiny, testing and review as those from OpenSSL.

If you want to use the internal pure-python primitives, it is highly advisable that you have a good understanding of the risks that this pose, and make an informed decision on whether those risks are acceptable to you.

Reticulum is relatively young software, and should be considered as such. While it has been built with cryptography best-practices very foremost in mind, it has not been externally security audited, and there could very well be privacy or security breaking bugs. If you want to help out, or help sponsor an audit, please do get in touch.

Acknowledgements & Credits

Reticulum can only exist because of the mountain of Open Source work it was built on top of, the contributions of everyone involved, and everyone that has supported the project through the years. To everyone who has helped, thank you so much.

A number of other modules and projects are either part of, or used by Reticulum. Sincere thanks to the authors and contributors of the following projects:

• PyCA/cryptography, BSD License
• Pure-25519 by Brian Warner, MIT License
• Pysha2 by Thom Dixon, MIT License
• Python-AES by Or Gur Arie, MIT License
• Curve25519.py by Nicko van Someren, Public Domain
• I2Plib by Viktor Villainov
• PySerial by Chris Liechti, BSD License
• Configobj by Michael Foord, Nicola Larosa, Rob Dennis & Eli Courtwright, BSD License
• Six by Benjamin Peterson, MIT License
• ifaddr by Pydron, MIT License
• Umsgpack.py by Ivan A. Sergeev
• Python