Reticulum Network Stack β

Reticulum is the cryptography-based networking stack for wide-area networks built on readily available hardware. It can operate even with very high latency and extremely low bandwidth. Reticulum allows you to build wide-area networks with off-the-shelf tools, and offers end-to-end encryption and connectivity, initiator anonymity, autoconfiguring cryptographically backed multi-hop transport, efficient addressing, unforgeable delivery acknowledgements and more.

The vision of Reticulum is to allow anyone to be their own network operator, and to make it cheap and easy to cover vast areas with a myriad of independent, interconnectable and autonomous networks. Reticulum is not one network. It is a tool for building thousands of networks. Networks without kill-switches, surveillance, censorship and control. Networks that can freely interoperate, associate and disassociate with each other, and require no central oversight. Networks for human beings. Networks for the people.

Reticulum is a complete networking stack, and does not rely on IP or higher layers, but it is possible to use IP as the underlying carrier for Reticulum. It is therefore trivial to tunnel Reticulum over the Internet or private IP networks.

Having no dependencies on traditional networking stacks frees up overhead that has been used to implement a networking stack built directly on cryptographic principles, allowing resilience and stable functionality, even in open and trustless networks.

No kernel modules or drivers are required. Reticulum runs completely in userland, and can run on practically any system that runs Python 3.

Read The Manual

The full documentation for Reticulum is available at markqvist.github.io/Reticulum/manual/.

You can also download the Reticulum manual as a PDF

For more info, see unsigned.io/projects/reticulum

Notable Features

• Coordination-less globally unique adressing and identification
• Fully self-configuring multi-hop routing
• Complete initiator anonymity, communicate without revealing your identity
• Asymmetric X25519 encryption and Ed25519 signatures as a basis for all communication
• Forward Secrecy with ephemereal Elliptic Curve Diffie-Hellman keys on Curve25519
• Reticulum uses the Fernet specification for on-the-wire / over-the-air encryption
  • Keys are ephemeral and derived from an ECDH key exchange on Curve25519
  • AES-128 in CBC mode with PKCS7 padding
  • HMAC using SHA256 for authentication
  • IVs are generated through os.urandom()
• Unforgeable packet delivery confirmations
• A variety of supported interface types
• An intuitive and easy-to-use API
• Reliable and efficient transfer of arbritrary amounts of data
  • Reticulum can handle a few bytes of data or files of many gigabytes
  • Sequencing, transfer coordination and checksumming is automatic
  • The API is very easy to use, and provides transfer progress
• Lightweight, flexible and expandable Request/Response mechanism
• Efficient link establishment
  • Total bandwidth cost of setting up an encrypted link is 3 packets totalling 237 bytes
  • Low cost of keeping links open at only 0.62 bits per second

Examples of Reticulum Applications

If you want to quickly get an idea of what Reticulum can do, take a look at the following resources.

• LXMF is a distributed, delay and disruption tolerant message transfer protocol built on Reticulum
• For an off-grid, encrypted and resilient mesh communications platform, see Nomad Network
• The Android, Linux and macOS app Sideband has a graphical interface and focuses on ease of use.

Where can Reticulum be used?

Over practically any medium that can support at least a half-duplex channel with 500 bits per second throughput, and an MTU of 500 bytes. Data radios, modems, LoRa radios, serial lines, AX.25 TNCs, amateur radio digital modes, ad-hoc WiFi, free-space optical links and similar systems are all examples of the types of interfaces Reticulum was designed for.

An open-source LoRa-based interface called RNode has been designed specifically for use with Reticulum. It is possible to build yourself, or it can be purchased as a complete transceiver that just needs a USB connection to the host.

Reticulum can also be encapsulated over existing IP networks, so there's nothing stopping you from using it over wired ethernet or your local WiFi network, where it'll work just as well. In fact, one of the strengths of Reticulum is how easily it allows you to connect different mediums into a self-configuring, resilient and encrypted mesh.

As an example, it's possible to set up a Raspberry Pi connected to both a LoRa radio, a packet radio TNC and a WiFi network. Once the interfaces are configured, Reticulum will take care of the rest, and any device on the WiFi network can communicate with nodes on the LoRa and packet radio sides of the network, and vice versa.

How do I get started?

The best way to get started with the Reticulum Network Stack depends on what you want to do. For full details and examples, have a look at the Getting Started Fast section of the Reticulum Manual.

To simply install Reticulum and related utilities on your system, the easiest way is via pip:

pip3 install rns

You can then start any program that uses Reticulum, or start Reticulum as a system service with the rnsd utility.

When first started, Reticulum will create a default configuration file, providing basic connectivity to other Reticulum peers. The default config file contains examples for using Reticulum with LoRa transceivers (specifically RNode), packet radio TNCs/modems, TCP and UDP.

You can use the examples in the config file to expand communication over many mediums such as packet radio or LoRa (with RNode), serial ports, or over fast IP links and the Internet using the UDP and TCP interfaces. For more detailed examples, take a look at the Supported Interfaces section of the Reticulum Manual.

Included Utilities

Reticulum includes a range of useful utilities for managing your networks, viewing status and information, and other tasks. You can read more about these programs in the Included Utility Programs section of the Reticulum Manual.

• The system daemon rnsd for running Reticulum as an always-available service
• An interface status utility called rnstatus, that displays information about interfaces
• The path lookup and and management tool rnpath letting you view and modify path tables
• A diagnostics tool called rnprobe for checking connectivity to destinations
• A simple file transfer program called rncp making easy to copy files to remote systems
• The remote command execution program rnx that let's you run commands and programs and retrieve output from remote systems

All tools, including rnx and rncp, work reliably and well even over very low-bandwidth links like LoRa or Packet Radio.

Supported interface types and devices

Reticulum implements a range of generalised interface types that covers most of the communications hardware that Reticulum can run over. If your hardware is not supported, it's relatively simple to implement an interface class. I will gratefully accept pull requests for custom interfaces if they are generally useful.

Currently, the following interfaces are supported:

• Any ethernet device
• LoRa using RNode
• Packet Radio TNCs (with or without AX.25)
• KISS-compatible hardware and software modems
• Any device with a serial port
• TCP over IP networks
• UDP over IP networks
• External programs via stdio or pipes
• Custom hardware via stdio or pipes

Performance

Reticulum targets a very wide usable performance envelope, but prioritises functionality and performance over low-bandwidth links. The goal is to provide a dynamic performance envelope from 250 bits per second, to 1 gigabit per second on normal hardware.

Currently, the usable performance envelope is approximately 500 bits per second to 20 megabits per second, with links faster than that not being saturated. Performance beyond the current level is planned for the future, but not highly prioritised at this point.

Current Status

Reticulum should currently be considered beta software. All core protocol features are implemented and functioning, but additions will probably occur as real-world use is explored. There will be bugs. The API and wire-format can be considered relatively stable at the moment, but could change if warranted.

Development Roadmap

• Version 0.3.8
  • Improving the manual with sections specifically for beginners
  • Utilities for managing identities, signing and encryption
  • Support for radio and modem interfaces on Android
  • User friendly interface configuration tool
  • Easy way to share interface configurations, see #19
  • More interface types for even broader compatibility
    • Plain ESP32 devices (ESP-Now, WiFi, Bluetooth, etc.)
    • More LoRa transceivers
    • AT-compatible modems
    • IR Transceivers
    • AWDL / OWL
    • HF Modems
    • CAN-bus
    • ZeroMQ
    • MQTT
    • IrDA / IrPHY
    • SPI
    • i²c
• Version 0.3.9
  • A portable cryptography core, supporting multiple backends
  • Performance optimisations
  • Memory optimisations
• Planned, but not yet scheduled
  • Globally routable multicast
  • Bindings for other programming languages
  • A portable Reticulum implementation in C, see #21

Dependencies

The installation of the default rns package requires the dependencies listed below. Almost all systems and distributions have readily available packages for the above dependencies, and when the rns package is installed with pip, the dependencies will automatically be downloaded and installed as well.

• PyCA/cryptography
• netifaces
• pyserial

On more unusual systems, and in some rare cases, it might not be possible to install or even compile one or more of the above modules. In such situations, you can use the rnspure package instead, which require no external dependencies for installation. Please note that the contents of the rns and rnspure packages are identical. The only difference is that the rnspure package lists no dependencies required for installation.

No matter how Reticulum is installed and started, it will load external dependencies only if they are needed and available. If for example you want to use Reticulum on a system that cannot support pyserial, it is perfectly possible to do so using the rnspure package, but Reticulum will not be able to use serial-based interfaces. All other available modules will still be loaded when needed.

Please Note! If you use the rnspure package to run Reticulum on systems that do not support PyCA/cryptography, it is important that you read and understand the Cryptographic Primitives section of this document.

Public Testnet

If you just want to get started experimenting without building any physical networks, you are welcome to join the Unsigned.io RNS Testnet. The testnet is just that, an informal network for testing and experimenting. It will be up most of the time, and anyone can join, but it also means that there's no guarantees for service availability.

The testnet runs the very latest version of Reticulum (often even a short while before it is publicly released). Sometimes experimental versions of Reticulum might be deployed to nodes on the testnet, which means strange behaviour might occur. If none of that scares you, you can join the testnet via eihter TCP or I2P. Just add one of the following interfaces to your Reticulum configuration file:

# For connecting over TCP/IP:

  [[RNS Testnet Frankfurt]]
    type = TCPClientInterface
    interface_enabled = yes
    outgoing = True
    target_host = frankfurt.rns.unsigned.io
    target_port = 4965


# For connecting over I2P:

  [[RNS Testnet I2P Node A]]
    type = I2PInterface
    interface_enabled = yes
    peers = ykzlw5ujbaqc2xkec4cpvgyxj257wcrmmgkuxqmqcur7cq3w3lha.b32.i2p

The testnet also contains a number of Nomad Network nodes, and LXMF propagation nodes.

Support Reticulum

You can help support the continued development of open, free and private communications systems by donating via one of the following channels:

• Monero:

  84FpY1QbxHcgdseePYNmhTHcrgMX4nFf
  BYtz2GKYToqHVVhJp8Eaw1Z1EedRnKD1
  9b3B8NiLCGVxzKV17UMmmeEsCrPyA5w
  

• Ethereum

  0x81F7B979fEa6134bA9FD5c701b3501A2e61E897a
  

• Bitcoin

  3CPmacGm34qYvR6XWLVEJmi2aNe3PZqUuq
  

• Ko-Fi: https://ko-fi.com/markqvist

Are certain features in the development roadmap are important to you or your organisation? Make them a reality quickly by sponsoring their implementation.

Cryptographic Primitives

Reticulum has been designed to use a simple suite of efficient, strong and modern cryptographic primitives, with widely available implementations that can be used both on general-purpose CPUs and on microcontrollers. The necessary primitives are:

• Ed25519 for signatures
• X22519 for ECDH key exchanges
• HKDF for key derivation
• Fernet for encrypted tokens
  • AES-128 in CBC mode
  • HMAC for message authentication
• SHA-256
• SHA-512

In the default installation configuration, the X25519, Ed25519 and AES-128-CBC primitives are provided by OpenSSL (via the PyCA/cryptography package). The hashing functions SHA-256 and SHA-512 are provided by the standard Python hashlib. The HKDF, HMAC, Fernet primitives, and the PKCS7 padding function are always provided by the following internal implementations:

• HKDF.py
• HMAC.py
• Fernet.py
• PKCS7.py

Reticulum also includes a complete implementation of all necessary primitives written in pure Python. If OpenSSL & PyCA are not available on the system when Reticulum is started, Reticulum will instead use the internal pure-python primitives. A trivial consequence of this is performance, with the OpenSSL backend being much faster. The most important consequence however, is the potential loss of security by using primitives that has not seen the same amount of scrutiny, testing and review as those from OpenSSL.

If you want to use the internal pure-python primitives, it is highly advisable that you have a good understanding of the risks that this pose, and make an informed decision on whether those risks are acceptable for your.

Reticulum is relatively young software, and should be considered as such. While it has been built with cryptography best-practices very foremost in mind, it has not been externally security audited, and there could very well be privacy or security breaking bugs. If you want to help out, or help sponsor an audit, please do get in touch.

Acknowledgements & Credits

Reticulum can only exist because of the mountain of Open Source work it was built on top of, the contributions of everyone involved, and everyone that has supported the project through the years.

A number of other modules and projects are either part of, or used by Reticulum. Sincere thanks to the authors and contributors of the following projects:

• PyCA/cryptography, BSD License
• Pure-25519 by Brian Warner, MIT License
• Pysha2 by Thom Dixon, MIT License
• Python-AES by Or Gur Arie, MIT License
• Curve25519.py by Nicko van Someren, Public Domain
• I2Plib by Viktor Villainov
• Configobj by Michael Foord, Nicola Larosa, Rob Dennis & Eli Courtwright, BSD License
• Six by Benjamin Peterson, MIT License
• Umsgpack.py by Ivan A. Sergeev
• Python

To everyone who helped me, thank you so much.