Mirrors
/
aredn
mirror of https://github.com/aredn/aredn.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
aredn/patches/series

51 lines
1.5 KiB
Plaintext
Raw Normal View History

aredn: upgrade to pre-openwrt-19.07.2
2020-02-25 22:15:15 -07:00
001-ath79-cpe220v3-sysupgrade-supported.patch
Initial OpenWRT 23.05.0 merge (#963) * Initial OpenWRT 23.05.0 merge * Fix get_rfchannels for new iwinfo format * Fix initial wlan name * Move patches to 5.15 from 5.10 * Fix flash write problem on Ubiquiti devices * Use new ssl patch * Reduce binary sizes * Have to have hostapd installed now, even on tiny builds * Simplify device support * Revert Mikrotik NAND sysupgrade system. OpenWRT doesnt really support Mikrotik NAND devices after 2019 and the new support appeared broken. So reverted to the 2022 mechanism which does work and avoid upgrade problems. * Fixes for tiny builds * More tiny shrinking * Fix newly added firewall rules * Update permanent packages * Update permanent packages * Support for Nanobeam 2AC (2.4GHz) device. 20MHz channels only. * Update support * Add GL.iNet B1300 * Add to radios.json * Update supported devices * Dont force the LAN DHCP to run * Revert CURL SSL test * Fix radio count when there are no radios * Switch the lan ports on the gl-b1300 * Add support for GL.iNET Beryl MT1300 * Fix visual lat/lon setting bug * Make the setup "Save Changes" button also save the location data * Fix location/map system with geo location fallback * Recolor * Fix default bandwidth selection * Support multi-band radios * Generic mechanism to set compat version to 1.1 * Switch ethernet ports * 20 MHz channels only * Update docs * Add ham channels to Mediatek chips (20MHz only) * Automatically update the permpkg list when we upgrade * Fix 10MHz mode for Ubiquiti AC devices * Fix tiny builds * Bump the watch timeout for restarting olsrd olsrd is reliable these days, and very occasionally this was restarting it unnecessarily
2023-12-06 11:12:11 -07:00
001-ath79-reverse-wpad-basic-mbedtls.patch
006-flash-fixes.patch
LZ77 firwmare decompression for new Mikrotik devices (#923)
2023-09-02 01:15:34 -06:00
010-lz77-decompression-support.patch
Support for GL.iNet E750 (#1079) * Support for GL.iNet E750
2024-01-22 21:22:27 -07:00
011-fix-e750-reset-5g-crash.patch
Re-enable AREDN's reset button behaviour (#879)
2023-06-23 20:40:44 -06:00
100-remove-rcbutton-reset.patch
Add user agents (containing firmware version info) to package and firmware updates (#1593) * Add user-agent to opkg * Firmware update user agent
2024-10-02 23:10:47 -06:00
101-opkg-useragent.patch
Mikrotik bootloader v7 support (#1258) Some Mikrotik devices can no longer be downgraded to v6. Add support for v7 bootloaders.
2024-08-05 18:11:53 -06:00
610-mikrotik-sysupgrade-v7.patch
aredn: port part97 extended spectrum to openwrt 18.01.x This commit requires US FCC Part 97 licensing or equivilent in your country. Ported from AREDN 3.16.1.1 release
2018-03-30 16:41:44 -06:00
701-extended-spectrum.patch
702-enable-country-hx.patch
bugfix: enable dnsmasq in 18.01.x
2018-03-31 09:36:14 -06:00
703-fix-dnsmasq.patch
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
703-disable-ipv6-dnsmasq.patch
busybox: port AREDN usage of telnet from 3.16.1.1
2018-03-31 09:39:51 -06:00
704-enable-telnet.patch
aredn: update and port customized banner
2018-03-31 09:43:39 -06:00
705-aredn-banner.patch
aredn: port customized MeshNode SSID
2018-03-31 09:51:01 -06:00
706-MeshNode-SSID.patch
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
708-define-aredn-ath79-networks.patch
708-define-aredn-ipq40xx-networks.patch
Initial OpenWRT 23.05.0 merge (#963) * Initial OpenWRT 23.05.0 merge * Fix get_rfchannels for new iwinfo format * Fix initial wlan name * Move patches to 5.15 from 5.10 * Fix flash write problem on Ubiquiti devices * Use new ssl patch * Reduce binary sizes * Have to have hostapd installed now, even on tiny builds * Simplify device support * Revert Mikrotik NAND sysupgrade system. OpenWRT doesnt really support Mikrotik NAND devices after 2019 and the new support appeared broken. So reverted to the 2022 mechanism which does work and avoid upgrade problems. * Fixes for tiny builds * More tiny shrinking * Fix newly added firewall rules * Update permanent packages * Update permanent packages * Support for Nanobeam 2AC (2.4GHz) device. 20MHz channels only. * Update support * Add GL.iNet B1300 * Add to radios.json * Update supported devices * Dont force the LAN DHCP to run * Revert CURL SSL test * Fix radio count when there are no radios * Switch the lan ports on the gl-b1300 * Add support for GL.iNET Beryl MT1300 * Fix visual lat/lon setting bug * Make the setup "Save Changes" button also save the location data * Fix location/map system with geo location fallback * Recolor * Fix default bandwidth selection * Support multi-band radios * Generic mechanism to set compat version to 1.1 * Switch ethernet ports * 20 MHz channels only * Update docs * Add ham channels to Mediatek chips (20MHz only) * Automatically update the permpkg list when we upgrade * Fix 10MHz mode for Ubiquiti AC devices * Fix tiny builds * Bump the watch timeout for restarting olsrd olsrd is reliable these days, and very occasionally this was restarting it unnecessarily
2023-12-06 11:12:11 -07:00
708-define-aredn-ramips-networks.patch
aredn: iperf fw rules and fw restart on pkg install Port iperf fw rules and fw restart on pkg install to new build structure
2018-06-30 17:37:45 -06:00
709-iperf-fw-restart.patch
Trim Packages (#96) Closes #81 * Trim Packages Kernel support for USB has been moved to modules libpcap and tcpdump have been moved to modules libnetsnmp and snmpd have been moved to modules IPv6 has been removed from the kernel IPv6 support has been removed from busybox network utils as well. (no more funny DNS responses in nslookup!) * Remove ping6 and traceroute6 They are no longer needed * Changed patch name and number and updated series file
2018-08-02 14:53:20 -06:00
710-no-ping6-traceroute6.patch
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
711-aredn-ports-dumbswitch-ar8216.patch
aredn: add auto distance setting option contributing author lua code: dman776 <dman776@gmail.com>
2019-04-01 21:48:41 -06:00
712-auto-distance-settings.patch
aredn: upgrade to Openwrt 19.07.0 release Co-authored-by: Andrew KK4ZUZ <apcameron@softhome.net> This commit begins the process to migrate from ar71xx to ath79 target images.
2020-01-22 18:37:27 -07:00
714-vtun-openssl-fix.patch
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
714-vtun-fix-cdefs.patch
aredn: upgrade to Openwrt 19.07.0 release Co-authored-by: Andrew KK4ZUZ <apcameron@softhome.net> This commit begins the process to migrate from ar71xx to ath79 target images.
2020-01-22 18:37:27 -07:00
715-set-min-free.patch
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
717-fix-olsrd-oparse-error.patch
718-temp-remove-olsrd-pud.patch
719-disable-ipv6.patch
Support for mANTbox 2 12s (#1083) * Add routerboard-911g-2hpnd-12s * Fix procd for devices without /dev/console * Disable console reset in kernel
2024-01-24 20:28:36 -07:00
720-procd-fix-cwd.patch
730-mikrotik-disable-console.patch
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
731-ag71xx-updates-and-fixes.patch
742-5-and-10mhz-ath10k-ct-support.patch
Initial OpenWRT 23.05.0 merge (#963) * Initial OpenWRT 23.05.0 merge * Fix get_rfchannels for new iwinfo format * Fix initial wlan name * Move patches to 5.15 from 5.10 * Fix flash write problem on Ubiquiti devices * Use new ssl patch * Reduce binary sizes * Have to have hostapd installed now, even on tiny builds * Simplify device support * Revert Mikrotik NAND sysupgrade system. OpenWRT doesnt really support Mikrotik NAND devices after 2019 and the new support appeared broken. So reverted to the 2022 mechanism which does work and avoid upgrade problems. * Fixes for tiny builds * More tiny shrinking * Fix newly added firewall rules * Update permanent packages * Update permanent packages * Support for Nanobeam 2AC (2.4GHz) device. 20MHz channels only. * Update support * Add GL.iNet B1300 * Add to radios.json * Update supported devices * Dont force the LAN DHCP to run * Revert CURL SSL test * Fix radio count when there are no radios * Switch the lan ports on the gl-b1300 * Add support for GL.iNET Beryl MT1300 * Fix visual lat/lon setting bug * Make the setup "Save Changes" button also save the location data * Fix location/map system with geo location fallback * Recolor * Fix default bandwidth selection * Support multi-band radios * Generic mechanism to set compat version to 1.1 * Switch ethernet ports * 20 MHz channels only * Update docs * Add ham channels to Mediatek chips (20MHz only) * Automatically update the permpkg list when we upgrade * Fix 10MHz mode for Ubiquiti AC devices * Fix tiny builds * Bump the watch timeout for restarting olsrd olsrd is reliable these days, and very occasionally this was restarting it unnecessarily
2023-12-06 11:12:11 -07:00
742-radio-extend-mediatek-support.patch
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
743-mac80211-ath10k.patch
744-dd-wrt-firmware.patch
745-ath10k-more-scan-channels.patch
746-rocket-m-xw-support.patch
747-mikrotik-extra-support.patch
748-powerbeam-m5-300-support.patch
749-fix-tiny.patch
Added nanobeam-m5-19 (#739) * Added nanobeam-m5-19 * Move patch to 7xx series
2023-03-04 07:47:25 -07:00
749-ubiquiti-extra-support.patch
Bump Ubiquiti version number for LiteBeam (#959) to install on newer hardware
2023-10-11 19:42:16 -06:00
749-ubiquiti-firmware-version.patch
Fix IBSS problem on 2.4GHz (#608) There's a bug where 2.4GHz channels will associate incorrectly with other 2.4 channels even though they are on different frequencies. The problem appears to be triggered during scans when scan probes are sent and received on many different frequencies, but are then reported as as they arrive as if they come from the selected frequency of the device, causing incorrect stations to be created. This can only occur for IBSS (adhoc) mode, when the IBSS frequency is fixed, and when the SSID is also fixed. We do all this for AREDN. Fortunately these probe contains (but *only* on 2.4 GHz) the actual frequency of the sending device, so we can avoid incorrectly creating stations which are not really a match. This situation does not seem to happen on 5GHz channels. e Please enter the commit message for your changes. Lines starting
2022-12-31 20:20:37 -07:00
750-ibss-2g-fix.patch
Virtualized X86 support (#807) - 4/28/2023 * x86 configs * Update for new update system * Build support * Handle nowifi on status page
2023-04-28 12:01:58 -06:00
751-x86.patch
Initial OpenWRT 23.05.0 merge (#963) * Initial OpenWRT 23.05.0 merge * Fix get_rfchannels for new iwinfo format * Fix initial wlan name * Move patches to 5.15 from 5.10 * Fix flash write problem on Ubiquiti devices * Use new ssl patch * Reduce binary sizes * Have to have hostapd installed now, even on tiny builds * Simplify device support * Revert Mikrotik NAND sysupgrade system. OpenWRT doesnt really support Mikrotik NAND devices after 2019 and the new support appeared broken. So reverted to the 2022 mechanism which does work and avoid upgrade problems. * Fixes for tiny builds * More tiny shrinking * Fix newly added firewall rules * Update permanent packages * Update permanent packages * Support for Nanobeam 2AC (2.4GHz) device. 20MHz channels only. * Update support * Add GL.iNet B1300 * Add to radios.json * Update supported devices * Dont force the LAN DHCP to run * Revert CURL SSL test * Fix radio count when there are no radios * Switch the lan ports on the gl-b1300 * Add support for GL.iNET Beryl MT1300 * Fix visual lat/lon setting bug * Make the setup "Save Changes" button also save the location data * Fix location/map system with geo location fallback * Recolor * Fix default bandwidth selection * Support multi-band radios * Generic mechanism to set compat version to 1.1 * Switch ethernet ports * 20 MHz channels only * Update docs * Add ham channels to Mediatek chips (20MHz only) * Automatically update the permpkg list when we upgrade * Fix 10MHz mode for Ubiquiti AC devices * Fix tiny builds * Bump the watch timeout for restarting olsrd olsrd is reliable these days, and very occasionally this was restarting it unnecessarily
2023-12-06 11:12:11 -07:00
752-mikrotik-nand-revert.patch
753-ubiquiti-2ac.patch
Dynamically allocate urlencode/urldecode buffers (#1282)
2024-08-17 10:36:34 -06:00
760-uhttp-ucode.patch
Handle generic to specific name changes when upgrading (#585)
2022-12-24 22:17:53 -07:00
800-upgrade-compatibility.patch
Split the various Mikrotik radios into their individual variants (#677)
2023-01-26 14:34:48 -07:00
801-mikrotik-lhg-variants.patch
New UI (#1263) * New UI * Fix gzip filename race condition * Fix scrolling on first use page
2024-08-15 21:28:45 -06:00
802-gpio-typo.patch