aredn/files/etc/config.ap/_setup.default

wifi_proto = bridge
wifi_mode = ap
wifi_ssid = <NODE>
wifi_txpower = 19
wifi_channel = 6
wifi_chanbw = 20
wifi_distance = 0
wifi_hidden = 0

lan_proto = static
lan_ip = 172.27.1.1
lan_mask = 255.255.255.0
lan_dhcp = 1
lan_dhcp_noroute = 0

dhcp_start = 5
dhcp_end = 25
dhcp_limit = 20

wan_proto = dhcp
wan_dns1 = 8.8.8.8
wan_dns2 = 8.8.4.4
import of files/ from BBHN 1.0.0 (bbhn svn 273) 2013-11-14 23:11:16 -07:00			`wifi_proto = bridge`
			`wifi_mode = ap`
			`wifi_ssid = <NODE>`
			`wifi_txpower = 19`
			`wifi_channel = 6`
Add a channel bandwidth selector to the setup screen. Required for 900mhz devices to be supported due to band size. This can also be useful for allowing more devices to fit into the same amount of RF space as nodes may often not need full 20mhz wide channels. 2.4ghz while using standard BBHN SSID is restricted to 20mhz for compatibility. ref BBHN->ticket:50 2014-07-14 21:40:49 -06:00			`wifi_chanbw = 20`
import of files/ from BBHN 1.0.0 (bbhn svn 273) 2013-11-14 23:11:16 -07:00			`wifi_distance = 0`
			`wifi_hidden = 0`

			`lan_proto = static`
			`lan_ip = 172.27.1.1`
			`lan_mask = 255.255.255.0`
			`lan_dhcp = 1`
bugfix: "Disable default route" not kept during OTA upgrade. 2015-07-28 09:49:48 -06:00			`lan_dhcp_noroute = 0`
import of files/ from BBHN 1.0.0 (bbhn svn 273) 2013-11-14 23:11:16 -07:00
			`dhcp_start = 5`
			`dhcp_end = 25`
			`dhcp_limit = 20`

			`wan_proto = dhcp`
			`wan_dns1 = 8.8.8.8`
			`wan_dns2 = 8.8.4.4`