aredn/files/usr/local/bin/mgr/snrlog.lua

238 lines
7.8 KiB
Lua
Raw Normal View History

--[[
2024-05-29 01:45:25 -06:00
Part of AREDN® -- Used for creating Amateur Radio Emergency Data Networks
Copyright (C) 2019 Darryl Quinn
Copyright (C) 2021 Tim Wilkinson
See Contributors file for additional contributors
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation version 3 of the License.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
Additional Terms:
2024-05-29 01:45:25 -06:00
Additional use restrictions exist on the AREDN® trademark and logo.
See AREDNLicense.txt for more info.
2024-05-29 01:45:25 -06:00
Attributions to the AREDN® Project must be retained in the source code.
If importing this code into a new or existing project attribution
2024-05-29 01:45:25 -06:00
to the AREDN® project must be added to the source code.
You must not misrepresent the origin of the material contained within.
Modified versions must be modified to attribute to the original source
and be marked in reasonable ways as differentiate it from the original
version
--]]
function snrlog()
while true
do
run_snrlog()
wait_for_ticks(60) -- 1 minute
end
end
local MAXLINES = 2880 -- 2 days worth
local AGETIME = 43200
local INACTIVETIMEOUT = 10000
local tmpdir = "/tmp/snrlog"
local lastdat = "/tmp/snr.dat"
local defnoise = -95
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
local cursor = uci.cursor()
-- create tmp dir if needed
nixio.fs.mkdir(tmpdir)
function run_snrlog()
-- get system uptime
local now = nixio.sysinfo().uptime
-- get wifi interface name
local wifiiface = get_ifname("wifi")
-- if Mesh RF is turned off do nothing
if wifiiface == string.match(wifiiface, 'eth.*') then
return
end
-- get radio noise floor
local nf = iwinfo.nl80211.noise(wifiiface)
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
if not nf or nf < -110 or nf > -50 then
nf = defnoise
end
-- get all stations
local stations = iwinfo.nl80211.assoclist(wifiiface)
-- load up arpcache
local arpcache = {}
arptable(function(a)
arpcache[a["HW address"]:upper()] = a
end)
-- get the current bandwidth setting
local radio = "radio0"
cursor:foreach("wireless", "wifi-iface",
function(i)
if i.mode == "adhoc" then
radio = i.device
end
end
)
local bandwidth = cursor:get("wireless", radio, "chanbw")
-- load the lasttime table
local lasttime = {}
local nulledout = {}
if nixio.fs.stat(lastdat) then
for line in io.lines(lastdat) do
local mac, last, nulled = string.match(line, "(.*)|(.*)|(.*)")
lasttime[mac] = last
nulledout[mac] = nulled
end
end
-- iterate over all the stations and log neighbors
local trigger_auto_distance = false
local snrdatcache = {}
for mstation in pairs(stations) do
local mac = mstation:upper()
snrdatcache[mac] = now
-- find current data file
local efn = nil
for fn in nixio.fs.glob(tmpdir.."/"..mac.."-*") do
efn = fn
break
end
-- improve existing filename if we can
local datafile = tmpdir.."/"..mac.."-"
local arp = arpcache[mac]
if arp then
local ip = arp["IP address"]
local hostname = nixio.getnameinfo(ip)
if hostname then
datafile = datafile..hostname:lower():gsub("^dtdlink%.", ""):gsub("^mid%d+%.", ""):gsub("^xlink%d+%.", ""):gsub("%.local%.mesh$", "")
elseif ip then
datafile = datafile..ip
end
end
-- rename if necessary
if efn and efn ~= datafile then
nixio.fs.rename(efn, datafile)
end
-- check if auto-distance reset is required (new node)
-- note and run auto distancing right at the end
if efn == nil or now - lasttime[mac] > 100 then
trigger_auto_distance = true
end
local signal = stations[mac].signal or ""
local update = true;
if lasttime[mac] and stations[mac].inactive >= INACTIVETIMEOUT then
-- beacons expired
if nulledout[mac] == "true" then
-- No need to double log inactive null's
update = false
end
signal = "null"
end
if signal == 0 then
if nulledout[mac] == nil then
-- First time we have seen this show up
-- but it is at 0 wont be logged but will
-- end up in snrcache
nulledout[mac] = "true"
end
update = false
end
-- log neighbor data to datafile
if update then
-- trim datafile
file_trim(datafile, MAXLINES)
local f, err = assert(io.open(datafile, "a"),"Cannot open file ("..datafile..") for appending!")
if f then
local noise = stations[mac].noise or ""
local tx_mcs = stations[mac].tx_mcs or -1
local tx_rate = adjust_rate((stations[mac].tx_rate) / 1000, bandwidth)
local rx_mcs = stations[mac].rx_mcs or -1
local rx_rate = adjust_rate((stations[mac].rx_rate) / 1000, bandwidth)
f:write(string.format("%s,%s,%s,%s,%s,%s,%s\n", os.date("%m/%d/%Y %H:%M:%S",os.time()), signal, noise, tx_mcs, tx_rate, rx_mcs, rx_rate))
f:close()
else
print(err)
end
if signal == "null" then
nulledout[mac] = "true"
else
nulledout[mac] = "false"
end
lasttime[mac] = now
end
end
-- update snr.dat
for mac, last in pairs(lasttime) do
if now - last < AGETIME then
-- If not a neighbor and wasn't previously nulled out, write a null
if not snrdatcache[mac] and nulledout[mac] == "false" then
-- find the log file name
for logdatafile in nixio.fs.glob(tmpdir.."/"..mac.."*") do
-- Write a null to the log file
local f, err = assert(io.open(logdatafile, "a"),"Cannot open file ("..logdatafile..") for appending!")
if f then
f:write(string.format("%s,%s,%s,%s,%s,%s,%s\n", os.date("%m/%d/%Y %H:%M:%S", os.time()), 'null', nf, '0', '0', '0', '0'))
f:close()
nulledout[mac] = "true"
else
-- Don't log the null into SNRLog cause we were not successful
-- Though the assert() above should cause this too.
nulledout[mac] = "false"
end
break
end
end
-- keep it
snrdatcache[mac] = snrdatcache[mac] or last
else
-- find the file and purge it
for maclist in nixio.fs.glob(tmpdir.."/"..mac.."*") do
os.remove(maclist)
break
end
end
end
-- re-write snr.dat file
local f, err = assert(io.open(lastdat,"w+"),"Cannot overwrite "..lastdat)
for mac, last in pairs(snrdatcache) do
f:write(string.format("%s|%s|%s\n", mac, last, nulledout[mac]))
end
f:close()
-- trigger auto distancing if necessary
Link Quality Management (#360) * Link Quality Management experiment (built in) * Protect LQM pages * Omit "empty" mac addresses * Integrate LQM v0.2 Includes proposed UI if this were built-in. When LQM is enabled (advanced settings) the usual distance inputs are replaced with "min snr' and "max distance" inputs which are the major ones you might tweak, as well as a link to the LQM status page. Other controls are now available (so protected) in advanced settings. * Improve LQM updating * Use running snr averages * Merge app changes * AREDN-ize the UI * Improve status language * Improved DtD detection * Improve quality reporting * Link Quality category * Enable by default * Better intergration * Link => Neighbor * Formatting * Make sure initial page is populated without extra fetch * Handle empty lqm.info * Update with latest experiment algorithm changes * Validate LQM settings before applying them * Algorithm updates * Improve quality reporting * %% -> % * Default max distance now 50 miles * Get actual noise if radio will provide it * low_snr => min_snr * Dont print node description if we dont have one * Remove properties duplicated from setup page * Localize max distance. Miles in GB and US, Kilometers everywhere else. * Ping link quality testing * UDP 'ping' for quality check * Change Active Settings title * Expand ping test * Improve messaging * Add a ping penalty for neighbors which cannot be contacted in a timely manner. * Remove user_blocks config option. No one needs to use this anymore. * Localize distances on lqm page * Improve status reporting * First run emergency node setup. When a node first runs LQM, if the default settings fail to connect to a node we will now adjust them so that at least one node is viable. * Restore blocking of mac addresses * LQM now off by default fixed #47
2022-05-18 11:49:00 -06:00
if trigger_auto_distance and cursor:get("aredn", "@lqm[0]", "enable") ~= "1" then
reset_auto_distance()
nixio.syslog("notice", "snrlog: reset_auto_distance, " .. now)
end
end
return snrlog