aredn/files/usr/local/bin/olsrd-config

383 lines
12 KiB
Plaintext
Raw Normal View History

#! /usr/bin/lua
--[[
Part of AREDN -- Used for creating Amateur Radio Emergency Data Networks
Copyright (C) 2021 Tim Wilkinson
Original Perl Copyright (C) 2015 Conrad Lara
See Contributors file for additional contributors
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation version 3 of the License.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
Additional Terms:
Additional use restrictions exist on the AREDN(TM) trademark and logo.
See AREDNLicense.txt for more info.
Attributions to the AREDN Project must be retained in the source code.
If importing this code into a new or existing project attribution
to the AREDN project must be added to the source code.
You must not misrepresent the origin of the material contained within.
Modified versions must be modified to attribute to the original source
and be marked in reasonable ways as differentiate it from the original
version
--]]
require("nixio")
require("aredn.utils")
require("aredn.hardware")
aredn.info = require('aredn.info')
require("uci")
-- Whether to validate hosts and services before publishing
local validate = false
local validation_timeout = 150 * 60 -- 2.5 hours (so must fail 3 times in a row)
local validation_state = "/tmp/service-validation-state"
-- check what config gile we are building for
local uci_conf_file
if #arg == 0 then
uci_conf_file = "olsrd"
else
uci_conf_file = arg[1]
if #arg == 2 and arg[2] == "validate" then
validate = true
end
end
if uci_conf_file == "olsrd6" then
-- we only generate entries for IPv4 at the moment
os.exit(0)
end
local cursor = uci.cursor()
local names = {}
local hosts = {}
local services = {}
local tunnels = {}
function ip_to_hostname(ip)
if ip and ip ~= "" and ip ~= "none" then
local a, b, c, d = ip:match("(.*)%.(.*)%.(.*)%.(.*)")
local revip = d .. "." .. c .. "." .. b .. "." .. a
local f = io.popen("nslookup " .. ip)
if f then
local pattern = "^" .. revip .. "%.in%-addr%.arpa%s+name%s+=%s+(%S+)%.local%.mesh"
for line in f:lines()
do
local host = line:match(pattern)
if host then
f:close()
return host
end
end
f:close()
end
end
return ""
end
-- canonical names for this node
-- (they should up in reverse order, make the official name last)
local name = aredn.info.get_nvram("tactical")
if name ~= "" then
names[#names + 1] = name
end
name = aredn.info.get_nvram("node")
if name ~= "" then
names[#names + 1] = name
end
local dmz_mode = cursor:get("aredn", "@dmz[0]", "mode")
if dmz_mode ~= "0" then
if nixio.fs.stat("/etc/config.mesh/aliases.dmz") then
for line in io.lines("/etc/config.mesh/aliases.dmz")
do
local ip, host = line:match("(.*) (.*)")
if host then
hosts[#hosts + 1] = { ip = ip, host = host }
end
end
end
if nixio.fs.stat("/etc/ethers") then
local noprop_ip = {}
if nixio.fs.stat("/etc/hosts") then
for line in io.lines("/etc/hosts")
do
local ip = line:match("^(%S+)%s.*#NOPROP$")
if ip then
noprop_ip[ip] = true
end
end
end
for line in io.lines("/etc/ethers")
do
local ip = line:match("[0-9a-fA-F:]+%s+([%d%.]+)")
if ip and not noprop_ip[ip] then
local host = ip_to_hostname(ip)
if host then
hosts[#hosts + 1] = { ip = ip, host = host }
end
end
end
end
end
2022-11-14 21:45:58 -07:00
-- add a name for the dtdlink and xlink interfaces
if name then
local dtdip = aredn.hardware.get_interface_ip4(aredn.hardware.get_iface_name("dtdlink"))
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
if dtdip then
hosts[#hosts + 1] = { ip = dtdip, host = "dtdlink." .. name .. ".local.mesh" }
if nixio.fs.stat("/etc/config.mesh/xlink") then
local count = 0
uci.cursor("/etc/config.mesh"):foreach("xlink", "interface",
function(section)
if section.ipaddr then
hosts[#hosts + 1] = { ip = section.ipaddr, host = "xlink" .. count .. "." .. name .. ".local.mesh" }
count = count + 1
end
2022-11-14 21:45:58 -07:00
end
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
)
end
2022-11-14 21:45:58 -07:00
end
end
-- load the services
if nixio.fs.stat("/etc/config/services") then
for line in io.lines("/etc/config/services")
do
if line:match("^%w+://[%w%-%.]+:%d+.*|tcp|[^|]+$") or line:match("^%w+://[%w%-%.]+:%d+.*|udp|[^|]+$") then
services[#services + 1] = line
end
end
end
-- validation
if validate then
-- Load previous state
local vstate = {}
if nixio.fs.stat(validation_state) then
for line in io.lines(validation_state)
do
local last, key = line:match("^(%d+) (.*)$")
if last then
vstate[key] = tonumber(last)
end
end
end
local now = os.time()
local last = now + validation_timeout
local laniface = aredn.hardware.get_iface_name("lan")
-- Add in local names so services checks pass
for _, name in ipairs(names)
do
vstate[name:lower()] = last
end
-- Check we can reach all the IP addresses
for _, host in ipairs(hosts)
do
if os.execute("/bin/ping -q -c 1 -W 1 " .. host.ip .. " > /dev/null 2>&1") == 0 then
vstate[host.host:lower()] = last
elseif os.execute("/usr/sbin/arping -q -f -c 1 -w 1 -I " .. laniface .. " " .. host.ip .. " > /dev/null 2>&1") == 0 then
vstate[host.host:lower()] = last
end
end
-- Check all the services have a valid host
for _, service in ipairs(services)
do
local proto, hostname, port, path = service:match("^(%w+)://([%w%-%.]+):(%d+)(.*)|...|[^|]+$")
local vs = vstate[hostname:lower()]
if not vs or vs > now or dmz_mode == "0" then
if port == "0" then
-- no port so not a link - we can only check the hostname so have to assume the service is good
vstate[service] = last
elseif proto == "http" then
-- http so looks like a link. http check it
local status, effective_url = io.popen("/usr/bin/curl --max-time 10 --retry 0 --connect-timeout 2 --speed-time 5 --speed-limit 1000 --silent --output /dev/null --location --write-out '%{http_code} %{url_effective}' " .. "http://" .. hostname .. ":" .. port .. path):read("*a"):match("^(%d+) (.*)")
if status == "200" or status == "401" then
vstate[service] = last
elseif status == "301" or status == "302" or status == "303" or status == "307" or status == "308" then
-- Ended at a redirect rather than an actual page.
if effective_url:match("^https:") then
-- We cannot validate https: links so we just assume they're okay
vstate[service] = last
end
end
else
-- valid port, but we dont know the protocol (we cannot trust the one defined in the services file because the UI wont set
-- anything but 'tcp'). Check both tcp and udp and assume valid it either is okay
-- tcp
local s = nixio.socket("inet", "stream")
s:setopt("socket", "sndtimeo", 2)
local r = s:connect(hostname, tonumber(port))
s:close()
if r == true then
-- tcp connection succeeded
vstate[service] = last
else
-- udp
s = nixio.socket("inet", "dgram")
s:setopt("socket", "rcvtimeo", 2)
s:connect(hostname, tonumber(port))
s:send("")
r = s:recv(0)
s:close()
if r ~= nil then
-- A nil response is an explicity rejection of the udp request. Otherwise we have
-- to assume the service is valid
vstate[service] = last
end
end
end
end
end
-- Generate new hosts and services as long as they're valid
local old_hosts = hosts
hosts = {}
for _, host in ipairs(old_hosts)
do
local lname = host.host:lower()
local vs = vstate[lname]
if not vs then
hosts[#hosts + 1] = host
vstate[lname] = last
elseif vs > now then
hosts[#hosts + 1] = host
end
end
local old_services = services
services = {}
for _, service in ipairs(old_services)
do
local vs = vstate[service]
if not vs then
-- New services will be valid for a while, even if they're not there yet
services[#services + 1] = service
vstate[service] = last
elseif vs > now then
services[#services + 1] = service
end
end
-- Store state for next time
local f = io.open(validation_state, "w")
if f then
for key, last in pairs(vstate)
do
f:write(last .. " " .. key .. "\n")
end
f:close()
end
end
-- end validation
-- load the tunnels
if nixio.fs.stat("/etc/local/mesh-firewall/02-vtund") then
local tunnum = 50
cursor:foreach("vtun", "client",
function(section)
if section.enabled == "1" then
tunnels[#tunnels + 1] = "tun" .. tunnum
tunnum = tunnum + 1
end
end
)
local maxclients = cursor:get("aredn", "@tunnel[0]", "maxclients")
if not maxclients then
maxclients = 10
end
tunnum = 50 + maxclients
cursor:foreach("vtun", "server",
function(section)
if section.enabled == "1" then
tunnels[#tunnels + 1] = "tun" .. tunnum
tunnum = tunnum + 1
end
end
)
end
-- add the nameservice plugin
print()
print([[LoadPlugin "olsrd_nameservice.so.0.4"]])
print([[{]])
print([[ PlParam "sighup-pid-file" "/var/run/dnsmasq/dnsmasq.pid"]])
print([[ PlParam "interval" "30"]])
print([[ PlParam "timeout" "300"]])
print([[ PlParam "name-change-script" "/usr/local/bin/olsrd-namechange"]])
for _, name in ipairs(names)
do
print([[ PlParam "name" "]] .. name .. [["]])
end
for _, host in ipairs(hosts)
do
print([[ PlParam "]] .. host.ip .. [[" "]] .. host.host .. [["]])
end
for _, service in ipairs(services)
do
print([[ PlParam "service" "]] .. service .. [["]])
end
print([[}]])
-- add the ACTIVE tunnel interfaces
if #tunnels > 0 then
local tun_weight = cursor:get("aredn", "@tunnel[0]", "weight")
tun_weight = tonumber(tun_weight)
local tuns = ""
for _, tunnel in ipairs(tunnels)
do
tuns = tuns .. " \"" .. tunnel .. "\""
end
print()
print([[Interface]] .. tuns)
print([[{]])
print([[ Ip4Broadcast 255.255.255.255]])
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
if not tun_weight or tun_weight < 1 then
print([[ Mode "ether"]])
elseif tun_weight > 1 then
print([[ LinkQualityMult default ]] .. (1 / tun_weight))
end
print([[}]])
end
-- add the XLINK interfaces
if nixio.fs.stat("/etc/config.mesh/xlink") then
uci.cursor("/etc/config.mesh"):foreach("xlink", "interface",
function(section)
print()
print([[Interface "]] .. section.ifname .. [["]])
print([[{]])
if section.peer then
print([[ Ip4Broadcast ]] .. section.peer)
else
print([[ Ip4Broadcast 255.255.255.255]])
end
local weight = tonumber(section.weight)
if weight then
if weight > 1 then
print([[ LinkQualityMult default ]] .. (1 / weight))
elseif weight < 1 then
print([[ Mode "ether"]])
end
else
print([[ Mode "ether"]])
end
print([[}]])
end
)
end