aredn/files/www/cgi-bin/status

539 lines
20 KiB
Plaintext
Raw Normal View History

#!/usr/bin/lua
--[[
Part of AREDN -- Used for creating Amateur Radio Emergency Data Networks
Copyright (C) 2021 Tim Wilkinson
Original Perl Copyright (C) 2015 Conrad Lara
See Contributors file for additional contributors
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation version 3 of the License.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
Additional Terms:
Additional use restrictions exist on the AREDN(TM) trademark and logo.
See AREDNLicense.txt for more info.
Attributions to the AREDN Project must be retained in the source code.
If importing this code into a new or existing project attribution
to the AREDN project must be added to the source code.
You must not misrepresent the origin of the material contained within.
Modified versions must be modified to attribute to the original source
and be marked in reasonable ways as differentiate it from the original
version
--]]
require("nixio")
require("aredn.hardware")
require("aredn.http")
require("aredn.utils")
local html = require("aredn.html")
require("uci")
local aredn_info = require("aredn.info")
-- helpers start
function mesh_ip_to_hostnames(ip)
if not ip or ip == "" or ip == "none" then
return ""
end
local pattern = "^" .. ip .. "%s+([%w%-%.]+)"
local host = "none"
for line in io.lines("/etc/hosts")
do
local host = line:match(pattern)
if host then
return host.gsub("%s+", " / ")
end
end
if nixio.fs.stat("/var/run/hosts_olsr.stable") then
for line in io.lines("/var/run/hosts_olsr.stable")
do
local host = line:match(pattern)
if host then
host = host:gsub("^dtdlink%.","")
host = host:gsub("^mid[0-9]*%.","")
host = host:gsub("%.local.mesh$","")
return host
end
end
end
return host
end
function get_default_gw(iface)
-- wan will route via table 254 default gw
-- wifi will route via OLSR table 31 default gw
local rtable = ""
if iface == "wan" then
rtable = "ip route list table 254"
elseif iface == "wifi" then
rtable = "ip route list table 31"
else
return "none"
end
local p = io.popen(rtable)
if p then
for line in p:lines()
do
local gw = line:match("^default%svia%s([%d%.]+)")
if gw then
p:close()
return gw
end
end
p:close()
end
return "none"
end
function get_memavail()
local f = io.open("/proc/meminfo", "r")
if f then
for line in f:lines()
do
local memavail = line:match("^MemAvailable:%s+(%d+)%s+kB")
if memavail then
f:close()
return tonumber(memavail)
end
end
f:close()
end
return 0
end
function get_wifi_signal(wifiif)
local signal = -1000
local noise = -1000
for mac, station in pairs(iwinfo.nl80211.assoclist(wifiif))
do
if station.signal ~= 0 and station.signal > signal then
signal = station.signal
end
if station.noise ~= 0 and station.noise > noise then
noise = station.noise
end
end
if signal == -1000 or noise == -1000 then
return "none", "none"
else
if signal > 0 then
signal = (0 - signal)
end
if noise > 0 then
noise = (0 - noise)
end
return signal, noise
end
end
-- helpers end
local node = aredn_info.get_nvram("node")
if node == "" then
node = "NOCALL"
end
local tactical = aredn_info.get_nvram("tactical")
local config = aredn_info.get_nvram("config")
if config == "" or nixio.fs.stat("/etc/config.mesh", "type") ~= "dir" then
config = "not set"
end
local haswifi = aredn.hardware.has_wifi()
local wifi_iface = aredn.hardware.get_iface_name("wifi")
local wifi_nr = wifi_iface:match("wlan(%d+)")
local wifi_disabled = true
local radio = "radio0"
if haswifi and wifi_nr then
wifi_disabled = false
radio = "radio" .. wifi_nr
end
local cursor = uci.cursor()
local wifi_channel
local wifi_chanbw
local wifi_freq_range = ""
local wifi_ssid
if not wifi_disabled then
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
wifi_channel = cursor:get("wireless", radio, "channel")
wifi_channel = tonumber(wifi_channel) or 0
wifi_chanbw = tonumber(cursor:get("wireless", radio, "chanbw") or "20")
local rfchans = aredn.hardware.get_rfchannels(wifi_iface)
if rfchans and rfchans[1] then
local basefreq = rfchans[1].frequency
if basefreq > 3000 and basefreq < 5000 then
wifi_channel = wifi_channel * 5 + 3000
elseif basefreq > 900 and basefreq < 2300 then
wifi_channel = wifi_channel * 5 + 887
end
for _, chan in ipairs(rfchans)
do
if chan.number == wifi_channel then
wifi_freq_range = (chan.frequency - wifi_chanbw / 2) .. " - " .. (chan.frequency + wifi_chanbw / 2) .. " MHz"
break
end
end
end
wifi_ssid = "none"
cursor:foreach("wireless", "wifi-iface",
function (section)
if section.network == "wifi" then
wifi_ssid = section.ssid
return false
end
end
)
end
local node_desc = cursor:get("system", "@system[0]", "description")
local lat_lon = "<strong>Location Not Available</strong>"
local lat = cursor:get("aredn", "@location[0]", "lat")
local lon = cursor:get("aredn", "@location[0]", "lon")
if lat and lon then
lat_lon = string.format("<center><strong>Location: </strong> %s %s</center>", lat, lon)
end
local host_total = 0
local host_nodes = 0
if nixio.fs.stat("/var/run/hosts_olsr.stable") then
for line in io.lines("/var/run/hosts_olsr.stable")
do
if line:match("^10%.") and not line:match("%smid%d+%.") then
host_total = host_total + 1
local host = line:match("^10%..+%sdtdlink%.")
if host then
host_nodes = host_nodes + 1
end
end
end
end
-- post data
if os.getenv("REQUEST_METHOD") == "POST" then
require('luci.http')
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
local request = luci.http.Request(nixio.getenv(),
function()
local v = io.read(1024)
if not v then
io.close()
end
return v
end
)
local css = request:formvalue("css")
if css and css:match("%.css$") and nixio.fs.stat("/www/" .. css) then
nixio.fs.unlink("/tmp/web/style.css")
nixio.fs.symlink("/www/" .. css, "/tmp/web/style.css")
end
end
-- generate page
http_header()
html.header(node .. " status", true)
html.print("<body><form method='post' action='/cgi-bin/status' enctype='multipart/form-data'>")
html.print("<center>")
html.alert_banner()
html.msg_banner()
-- page header
html.print("<h1><big>" .. node)
if tactical ~= "" then
html.print(" / " .. tactical)
end
html.print("</big></h1>")
html.print("<center>" .. lat_lon .. "</center>")
if node_desc then
html.print("<table id='node_description_display'><tr><td>" .. node_desc .. "</td></tr></table>")
end
html.print("<hr>")
-- Work out what config mode we're in. We use this to better instruct the
-- user about the next steps
local config_mode = nil
if config == "not set" then
config_mode = "ram"
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
for line in io.lines("/proc/mounts")
do
if line:match("overlay") or line:match("ext4") then
config_mode = "setup"
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
break
end
end
end
-- nav buttons
html.navbar_user("status", config_mode)
html.print("<input type=hidden name=reload value=reload>")
if config_mode then
html.print("<b><br><br>This node is not yet configured.<br>")
if config_mode == "setup" then
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
html.print("Go to the <a href='setup'>setup page</a> and set your node name and password.<br>")
html.print("Click Save Changes, <u>even if you didn't make any changes</u>, then the node will reboot.</b>")
else
html.print("<br><b>*** WARNING ***</b><p>AREDN is currently running a temporary image.<br>All configuration changes will be lost if you reboot.</p>")
html.print("Before doing anything else, please go<br>to the <a href='admin'>administration page</a> and upload firmware.<br>")
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
end
html.print("<br><br>")
html.print("<div style='max-width:540px; text-align:left'>")
html.print("<p>This device can be configured to either permit or prohibit known encrypted traffic on its RF link. It is up to the user to decide which is appropriate based on how it will be used and the license under which it will be operated. These rules vary by country, frequency, and intended use. You are encouraged to read and understand these rules before going further.</p>")
html.print("<p>This device is pre-configured with no restrictions as to the type of data being passed.</p>")
html.print("<p>Follow these steps if <span style=\"text-decoration: underline\">you wish to prohibit</span> known encrypted traffic on the RF link. These instructions will disappear, so copy them for your reference:</p>")
html.print("<p><ol>")
html.print("<li>Setup your node name and password as instructed at the top of this page</li>")
html.print("<li>After you Save Changes allow your node to reboot</li>")
html.print("<li>Return to the Node Status page and navigate to Setup &gt Administration</li>")
html.print("<li>Obtain the blockknownencryption package from the AREDN&trade; website OR refresh the Package list (node must be connected to the internet)</li>")
html.print("<li>Install the blockknownencryption package by uploading it or choosing it from the package drop-down list</li>")
html.print("<li>Wait until the package installs and then reboot your node</li>")
html.print("</ol></p>")
html.print("</div>")
end
-- status display
local col1 = {}
local col2 = {}
-- left column - network interface info
local ip = cursor:get("network", "wifi", "ipaddr")
local mask = cursor:get("network", "wifi", "netmask")
local cidr
if not ip or not mask then
col1[#col1 + 1] = "<th align=right><nobr>primary address:</nobr></th><td>none<br>"
else
cidr = netmask_to_cidr(mask)
if wifi_disabled then
col1[#col1 + 1] = "<th align=right><nobr>primary address:</nobr></th><td>" .. ip .. " <small>/ " .. cidr .. "</small><br>"
else
wifi_gw = get_default_gw("wifi")
col1[#col1 + 1] = "<th align=right><nobr>mesh address:</nobr><br><nobr>mesh gateway:</nobr><br><nobr>gateway node:</nobr><br>SSID:<br>channel:<br><nobr>channel width:</nobr><br>frequency range:</br></th><td>" .. ip .. " <small>/ " .. cidr .. "</small><br>" .. wifi_gw .. "<br>" .. mesh_ip_to_hostnames(wifi_gw) .. "<br>" .. wifi_ssid .. "<br>" .. wifi_channel .. "<br>" .. wifi_chanbw .. " MHz<br>" .. wifi_freq_range .. "</td>"
end
end
ip = cursor:get("network", "lan", "ipaddr")
mask = cursor:get("network", "lan", "netmask")
local browser_ip
local remote_ip = os.getenv("REMOTE_ADDRESS")
if remote_ip then
remote_ip = remote_ip.match("::ffff:([%d%.]+)")
end
local hide_local = false
if remote_ip then
browser_ip = remote_ip
if not validate_same_subnet(remote_ip, ip, mask) then
hide_local = true
end
end
if ip:match("^10%.") or not hide_local then
cidr = netmask_to_cidr(mask)
local lan_wifi_ssid = "none"
cursor:foreach("wireless", "wifi-iface",
function (section)
if section.network == "lan" then
lan_wifi_ssid = section.ssid
return false
end
end
)
if lan_wifi_ssid ~= "none" then
col1[#col1 + 1] = "<th align=right><nobr>LAN address:</nobr><br><nobr>LAN AP SSID:</nobr></th><td>" .. ip .. " <small>/ " .. cidr .. "</small><br>" .. lan_wifi_ssid .. "</td>"
else
col1[#col1 + 1] = "<th align=right><nobr>LAN address:</nobr></th><td>" .. ip .. " <small>/ " .. cidr .. "</small></td>"
end
end
local wan_iface = aredn.hardware.get_iface_name("wan")
if wan_iface and not hide_local then
local ip, bcast, mask = aredn.hardware.get_interface_ip4(wan_iface)
if not ip then
if not wifi_gw or wifi_gw == "none" then
col1[#col1 + 1] = "<th align=right valign=top><nobr>WAN address:</nobr><br><nobr>default gateway:</nobr></th><td valign=top>none<br>none</td>"
else
col1[#col1 + 1] = "<th align=right valign=top><nobr>WAN address:</nobr><br><nobr>default gateway:</nobr><br><nobr>gateway node:</nobr></th><td valign=top>none<br>" .. wifi_gw .. "<br>" .. mesh_ip_to_hostnames(wifi_gw) .. "</td>"
end
else
local wprefix = ""
local wan_wifi_snr = "none"
local wan_wifi_ssid
if wan_iface:match("^wlan%d+$") then
wprefix = "wifi "
local s, n = get_wifi_signal(wan_iface)
if s ~= "none" and n ~= "none" then
wan_wifi_snr = math.abs(s - n)
end
cursor:foreach("wireless", "wifi-iface",
function (section)
if section.network == "wan" then
wan_wifi_ssid = section.ssid
return false
end
end
)
if not wan_wifi_ssid then -- if still nil then set default
wan_wifi_ssid = "none"
end
end
cidr = netmask_to_cidr(mask)
wan_gw = get_default_gw("wan")
if wprefix == "" then -- no wifi wan
if wan_gw:match("^10%.") or not hide_local then
if wan_gw:match("^10%.") then
col1[#col1 + 1] = "<th align=right><nobr><nobr>WAN address:</nobr><br>gateway:<br><nobr>gateway node:</nobr></th><td>" .. ip .. " <small>/ " .. cidr .. "</small><br>" .. wan_gw .. "<br><nobr>" .. mesh_ip_to_hostnames(wan_gw) .. "</nobr></td>"
else
col1[#col1 + 1] = "<th align=right><nobr>WAN address:</nobr><br>default gateway:</th><td>" .. ip .. " <small>/ " .. cidr .. "</small><br>" .. wan_gw .. "</td>"
end
end
else -- with wifi wan
if wan_wifi_ssid ~= "none" and wan_wifi_snr ~= "none" then
if wan_gw:match("^10%.") or not hide_local then
if wan_gw:match("^10%.") then
col1[#col1 + 1] = "<th align=right><nobr>" .. wprefix .. "WAN address:</nobr><br><nobr>SSID | SNR:</nobr><br>gateway:<br><nobr>gateway node:</nobr></th><td>" .. ip .. " <small>/ " .. cidr .. "</small><br><nobr>" .. wan_wifi_ssid .. " | " .. wan_wifi_snr .. " dB<br>" .. wan_gw .. "<br><nobr>" .. mesh_ip_to_hostnames(wan_gw) .. "</nobr></td>"
else
col1[#col1 + 1] = "<th align=right><nobr>" .. wprefix .. "WAN address:</nobr><br><nobr>SSID | SNR:</nobr><br>default gateway:</th><td>" .. ip .. " <small>/ " .. cidr .. "</small><br><nobr>" .. wan_wifi_ssid .. " | " .. wan_wifi_snr .. " dB<br>" .. wan_gw .. "</td>"
end
end
else
if wan_gw:match("^10%.") or not hide_local then
if wan_gw:match("^10%.") then
col1[#col1 + 1] = "<th align=right><nobr>" .. wprefix .. "WAN address:</nobr><br>gateway:<br><nobr>gateway node:</nobr></th><td>" .. ip .. " <small>/ " .. cidr .. "</small><br>" .. wan_gw .. "<br><nobr>" .. mesh_ip_to_hostnames(wan_gw) .. "</nobr></td>"
else
col1[#col1 + 1] = "<th align=right><nobr>" .. wprefix .. "WAN address:</nobr><br>default gateway:</th><td>" .. ip .. " <small>/ " .. cidr .. "</small><br>" .. wan_gw .. "</td>"
end
end
end
end
end
end
if browser_ip then
col1[#col1 + 1] = "<th align=right><nobr>your address:</nobr></th><td>" .. browser_ip .. "<br><nobr>" .. mesh_ip_to_hostnames(browser_ip) .. "</nobr></td>"
end
-- right column - system info
if config == "mesh" and not wifi_disabled then
col2[#col2 + 1] = "<th align=right valign=middle><nobr>signal|noise|SNR:</nobr></th><td valign=middle><nobr>"
local s, n = get_wifi_signal(wifi_iface)
if s == "none" then
col2[#col2] = col2[#col2] .. "no RF links"
col2[#col2] = col2[#col2] .. "&nbsp;&nbsp;&nbsp;<button type=button onClick='window.location=\"signal?realtime=1\"' title='Display continuous or archived signal strength on a chart'>Charts</button></nobr></td>"
else
col2[#col2] = col2[#col2] .. "<b>" .. s .. " | " .. n .. " | " .. math.abs(s - n) .. " dB</b>"
col2[#col2] = col2[#col2] .. "&nbsp;&nbsp;&nbsp;<button type=button onClick='window.location=\"signal?realtime=1\"' title='Display continuous or archived signal strength on a chart'>Charts</button></nobr></td>"
end
end
local azimuth = cursor:get("aredn", "@location[0]", "azimuth")
if tonumber(azimuth) then
azimuth = azimuth .. "&deg;"
else
azimuth = nil
end
local elevation = cursor:get("aredn", "@location[0]", "elevation")
if tonumber(elevation) then
elevation = elevation .. "&deg;"
else
elevation = nil
end
local height = cursor:get("aredn", "@location[0]", "height")
if tonumber(height) then
height = height .. "m"
else
height = nil
end
local antenna
if not wifi_disabled then
antenna = aredn.hardware.get_current_antenna(wifi_iface)
if antenna then
antenna = antenna.description
end
end
col2[#col2 + 1] = "<th align=right><nobr>firmware version:</nobr><br><nobr>model:</nobr><br>" ..
(antenna and "<br><nobr>antenna:</nobr>" or "") ..
(azimuth and "<br><nobr>azimuth:</nobr>" or "") ..
(elevation and "<br><nobr>elevation:</nobr>" or "") ..
(height and "<br><nobr>height:</nobr>" or "") ..
"</th><td>" ..
read_all("/etc/mesh-release") .. "<br>" .. (aredn.hardware.get_radio() or { name = "unknown" }).name .. "<br>" ..
(antenna and "<br>" .. antenna or "") ..
(azimuth and "<br>" .. azimuth or "") ..
(elevation and "<br>" .. elevation or "") ..
(height and "<br>" .. height or "") ..
"</td>"
local sysinfo = nixio.sysinfo()
local uptime = string.format("%d:%02d", math.floor(sysinfo.uptime / 3600) % 24, math.floor(sysinfo.uptime / 60) % 60)
if sysinfo.uptime >= 172800 then
uptime = math.floor(sysinfo.uptime / 86400) .. " days, " .. uptime
elseif sysinfo.uptime >= 86400 then
uptime = "1 day, " .. uptime
end
col2[#col2 + 1] = "<th align=right><nobr>system time:</nobr><br>uptime:</th><td>" .. os.date("%a %b %e %Y") .. "&nbsp;" .. os.date("%T %Z") .. "<br>" .. uptime .. "</td>"
local vfs = nixio.fs.statvfs("/overlay")
local fspace = vfs.bfree * vfs.bsize / 1024
if fspace < 100 then
fspace = "<blink><b>" .. fspace .. " KB</b></blink>"
else
fspace = fspace .. " KB"
end
local rspace = sysinfo.freeram / 1024
local mavail = get_memavail()
if rspace < mavail then
rspace = mavail
end
if rspace < 500 then
rspace = "<blink><b>" .. rspace .. " KB</b></blink>"
else
rspace = rspace .. " KB"
end
col2[#col2 + 1] = "<th align=right valign=top><nobr>load average:</nobr><br><nobr>available space:</nobr></th><td>" .. string.format("%.2f, %.2f, %.2f", sysinfo.loads[1], sysinfo.loads[2], sysinfo.loads[3]) .. "<br><nobr><em>flash</em> = " .. fspace .. "</nobr><br><nobr><em>memory</em> = " .. rspace .. "</nobr></td>"
col2[#col2 + 1] = "<th align=right valign=top><nobr>host entries:</nobr></th><td><b>" .. host_nodes .. "</b> nodes / <b>" .. host_total .. "</b> total devices</td>"
-- now print the tables
html.print("<br><br><table>")
html.print("<tr><td valign=top><table cellpadding=4>")
for i, line in ipairs(col1)
do
html.print("<tr>" .. line .. "</tr>")
end
html.print("</table></td><td valign=top><table cellpadding=4>")
for i, line in ipairs(col2)
do
html.print("<tr>" .. line .. "</tr>")
end
html.print("</table></td></tr></table>")
-- end
html.print("</center></form>")
html.footer()
html.print("</body></html>")