aredn/README.md

241 lines
7.8 KiB
Markdown
Raw Normal View History

2018-03-23 01:39:07 -06:00
# Amateur Radio Emergency Data Network AREDN(tm) Firmware
http://www.arednmesh.org
2018-03-23 01:39:07 -06:00
2018-09-20 23:16:29 -06:00
## Usage Information
2018-03-23 01:39:07 -06:00
### What to know about the images built with the instructions below
This is the active 'develop' branch with latest AREDN code.
At anytime a new change may be broken or break prior capabilities.
2018-09-20 23:16:29 -06:00
The Amateur Radio community is encouraged to participate in loading the
images produced from a "nightly build" and run the AREDN firmware in a
variety of environments. Given new features may not yet be documented,
participants should already have a basic knowledge of Linux and Networking to
understand and provide useful feedback to the Developer submitting the
code.
The goal of participation is to obtain confidence that new
features and the overall mesh node is stable. The more participation,
the earlier an issue is found, the faster an enhancement will be
turned into a release.
2018-09-20 23:16:29 -06:00
Here is a summary of significant features added since 3.18.9.0
was released:
2018-09-20 23:16:29 -06:00
* Locked to Openwrt 18.06.1
Please refer to https://gihub.com/aredn/aredn_ar71xx/issues
for a list of outstanding defects.
2018-09-20 23:16:29 -06:00
The following devices have a peculiar cat5 configuration due to a limitation in the Ethernet driver.
The 'Main" port is used for LAN devices only. The "Secondary" port is WAN and DtDLink usage
only. Depending on deployed usage, 2 cat5 cables may be needed.
* Ubiquiti Nanostation M5 XW
* Ubiquiti Nanostation M2 XW
* TP-Link CPE210 v1.0 and v1.1
* TP-Link CPE510 v1.0 and v1.1
Latest Mikrotik installation options are found at:
https://www.arednmesh.org/content/installation-instructions-mikrotik-devices
### Images built
Device | Image to Use | RAM | Stability
------ | ------------ | --- | ---------
AirGrid XM | bullet-m | 32Mb | stable
AirGrid XW | loco-m-xw | 32Mb | stable
AirRouter | airrouter | 32Mb | stable
AirRouter HP | airrouter | 32Mb | stable
Bullet M2/M2Ti/M5/M5Ti | bullet-m | 32Mb | stable
Bullet Ti | bullet-m | 32Mb | stable
Bullet M2 XW | rocket-m-xw | 64Mb | stable
2018-09-25 20:48:30 -06:00
NanoBeam-M2-13/16/19 | loco-m-xw | 32Mb | stable
NanoBridge 2G18 | bullet-m | 32Mb | stable
NanoBridge 5G22/25 | bullet-m | 32Mb | stable
NanoBridge M9 | bullet-m | 32Mb | stable
NanoStation Loco M2/M5/M9 XM | bullet-m | 32Mb | stable
2018-09-25 20:48:30 -06:00
NanoStation Loco M2 XW | loco-m-xw | 64Mb | stable
NanoStation Loco M5 XW with test date before ~Nov 2017| loco-m-xw | 64Mb | stable
NanoStation Loco M5 XW with test date on or after ~Nov 2017 | rocket-m-xw | 64Mb | stable
NanoStation M2/M3/M5 XM | nano-m | 32Mb | stable
NanoStation M2/M5 XW | nano-m-xw | 64Mb | stable
PicoStation M2 | bullet-m | 32Mb | stable
2018-09-25 20:48:30 -06:00
PowerBeam-M2-400 | loco-m-xw | 64Mb | stable
PowerBeam-M5-300 | loco-m-xw | 64Mb | stable
PowerBeam-M5-400/400ISO/620 | rocket-m-xw | 64Mb | stable
PowerBridge | nano-m | 64Mb | stable
Rocket M9/M2/M3/M5/M5GPS XM | rocket-m | 64Mb | stable
Rocket M2/M5 XW | rocket-m-xw | 64Mb | stable
Rocket M2 TI | rocket-m-ti? | 64Mb | unknown
Rocket M5 TI | rocket-m-ti | 64Mb | stable
TPLink CPE210 v1.0/v1.1 | cpe210-220-v1 | 64Mb | stable
TPLink CPE210 v2.0/v3.0 | cpe210-v2 | 64Mb | stable
2018-09-25 20:48:30 -06:00
TPLink CPE510 v1.0/v1.1/v2.0 | cpe510-520-v1 | 64Mb | stable
Mikrotik BaseBox 2/5 | mikrotik-nand-large | 64Mb | stable
Mikrotik hAP lite 952Ui-5ac2nD | mikrotik-rb-nor-flash-16M-ac | 64Mb | stable
2018-09-20 23:16:29 -06:00
## Submitting Bug Reports
Please submit all issues to http://github.com/aredn/aredn_ar71xx/issues
## Developer Only Information
The AREDN firmware is based on OpenWrt with additional packages and patches.
A Makefile automates the entire process to create firmware images.
### Building with Docker
Installing the Docker environment on your windows/linux/mac machine is a pre-requisite. A docker 'container' has been pre-configured with an aredn linux build environment. Alternative instructions are below if you wish to setup your linux install with the compiler pre-requisites necessary to do the build.
To build with docker:
```
docker pull arednmesh/builder
docker run -it --name builder arednmesh/builder
```
To pull an image (or any other file) out of the docker container:
```
docker cp builder:/opt/aredn/aredn_ar71xx/firmware/targets/ar71xx/generic/<image>.bin <local directory>
```
2018-03-23 01:39:07 -06:00
### Build Prerequisites
Please take a look at the [OpenWrt documentation](https://openwrt.org/docs/guide-developer/build-system/install-buildsystem)
2018-03-23 01:39:07 -06:00
for a complete and up to date list of packages for your operating system.
On Ubuntu/Debian:
```
apt-get install git subversion build-essential libncurses5-dev \
zlib1g-dev gawk unzip libxml-perl flex wget gettext quilt \
python libssl-dev shellcheck lua5.1
```
On openSUSE:
```
zypper install --type pattern devel_basis
zypper install git subversion ncurses-devel zlib-devel gawk unzip \
perl-libxml-perl flex wget gettext-runtime quilt python \
libopenssl-devel shellcheck lua51
```
### Building firmware images
To obtain the source and build the firmware locally use:
```bash
git clone https://github.com/aredn/aredn_ar71xx.git
cd aredn_ar71xx
2018-09-20 23:16:29 -06:00
git checkout 3.18.9.0
2018-03-23 01:39:07 -06:00
vi config.mk # enter your callsign, etc.
# build default ubnt and tplink images
make
# build and add mikrotik images to firmware dir
make SUBTARGET=mikrotik
2018-03-23 01:39:07 -06:00
```
Building the images may take minutes or hours depending on the machine.
2018-03-31 09:13:16 -06:00
For more details see [build options](https://openwrt.org/docs/guide-developer/build-system/use-buildsystem).
2018-03-23 01:39:07 -06:00
Review the build options in config.mk: `-j <number of cores + 1>`.
`V=s` will give more verbose error messages.
An internet connection is required during the build process. A good internet
connection can improve the build time.
2018-03-31 09:13:16 -06:00
You need approximately 10GB of space for the build.
2018-03-23 01:39:07 -06:00
### How to build prior builds of AREDN
2018-09-20 23:16:29 -06:00
Prior AREDN images can be rebuilt. Replace one of the following after
the "cd aredn_ar71xx" command above:
AREDN release 3.18.9.0
```
git checkout 3.18.9.0
```
AREDN release 3.16.2.0
```
git checkout 3.16.2.0
```
2018-07-27 13:42:11 -06:00
AREDN release 3.16.1.1
```
git checkout 3.16.1.1-make
```
AREDN build 176
```
git checkout 91ee867
```
Return to most current changes
```
git checkout develop
```
2018-03-23 01:39:07 -06:00
### Directory Layout
```
Included in the git Repo:
config.mk <- build settings
openwrt.mk <- which openwrt repo and branch/tag/commit to use
feeds.conf/ <- custom package feeds (edit to point to your clone of aredn_packages)
files/ <- file system in AERDN created images, most customizations go here
patches/ <- patches to openwrt go here
scripts/ <- tests and other scripts called from the build
configs/ <- definitions of features in the devices' kernel and what packages to include
Makefile <- the build definition
README.md <- this file
Created by the build:
openwrt/ <- cloned openwrt repository
firmware/ <- the build will place the images here
results/ <- code checks and other test results in jUnit xml format
```
### Patches with quilt
2018-03-31 09:13:16 -06:00
The patches directory contains quilt patches applied on top of the
2018-03-23 01:39:07 -06:00
openwrt git repo defined in config.mk.
If a patch is not yet included upstream, it can be placed in the `patches` directory with
the `quilt` tool. Please configure `quilt` as described in
2018-03-31 09:13:16 -06:00
[OpenWrt Quilt](https://openwrt.org/docs/guide-developer/build-system/use-patches-with-buildsystem).
2018-03-23 01:39:07 -06:00
#### Add, modify or delete a patch
Switch to the openwrt directory:
```bash
cd openwrt
```
Now you can use the `quilt` commands.
##### Example: add a patch
```bash
quilt push -a # apply all patches
quilt new 008-awesome.patch # tell quilt to create a new patch
quilt edit somedir/somefile1 # edit files
quilt edit somedir/somefile2
quilt refresh # creates/updates the patch file
```
## Submitting new features and patches to AREDN
2018-09-25 20:48:30 -06:00
The high level steps to submit to this repository https://github.com/aredn/aredn_ar71xx are:
2018-03-23 01:39:07 -06:00
1) create a github account and 'fork' this repo
2) git commit a change into your fork, e.g. http://github.com/ae6xe/aredn_ar71xx
3) create a pull request for http://github.com/aredn/aredn_ar71xx to consider your change