Mirrors
/
aredn
mirror of https://github.com/aredn/aredn.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
aredn/files/etc/config.mesh/olsrd

45 lines
1.1 KiB
Plaintext
Raw Normal View History

Merge SDWG Mesh progress with 1.0.0 BBHN Includes removing files that are provided by packages instead of being embedded as binaries. Changes made for UBNT hardware AND for newer base openwrt (Backfire)
2013-12-02 13:04:54 -07:00
config olsrd
option IpVersion '4'
bugfix: nodes sometimes show up as mid1 Nodes sometimes show up as a mid1 entry when dtdlink and RF connected. Sometimes the nodes will get the eth0 ip because wlan0 is not up yet. Under Barrier Breaker the MainIP option is now supported as part of the uci system which allows us to restore using this setting. We can now force the IP address that is claimed (wlan0) for the primary IP of the node.
2015-03-23 23:55:09 -06:00
option MainIp '<wifi_ip>'
Supernode support (#938) * Supernode option * Change supernode 10/8 route injection. Identify supernode in sysinfo.json * Supernode tunnels use port 5526 * Advertise supernode-ness * Update DNS if supernodes are available * Open up supernodes DNS service to incoming mesh requests * Simply nameserver update * Support supernodes on hap ac2 * Improve supernode nameserver update reliability * Rework how supernode nameservers are managed * Improve supernode dns advertising * Add super mesh button * User supernode name not ip in advert * Less intustive way to identify supernode dns * Add supernode ignore options Change supernode enabled -> enable * Improve DNS updates * Remove tunnels when switching to/from supernode mode * Blackhole any unknown routes on the supernode to avoid recursing packets * Add explicit reverse lookup rule for supernode when available * Just use dnsmasq changes for both forward and reverse names * Improve supernode detection So it doesnt keep writing to flash * Add reverse tunnel ip lookup to supernode * enabled => enable * Supernode tunnels start 172.30 * Remove supernode switch * Simplify supernode check * Fix nav test
2023-09-19 21:06:09 -06:00
option RtTable '30'
option RtTableDefault '31'
Add new feature device-to-device linking (dtdlink) The dtdlink interface is vlan 2 on eth0 and is used for linking two or more devices together. This will allow for band-to-band repeaters, sector antenna setups, etc. see BBHN->ticket:28
2014-04-09 00:19:45 -06:00
option LinkQualityAlgorithm 'etx_ffeth'
bugfix: OLSRD doesn't start on node reboot Under Barrier Breaker sometimes OLSRD gets started before any interface is up causing OLSRD to shutdown because no interfaces exist. Forces OLSRD to stay on and wait for the interfaces to come online.
2015-03-23 23:57:48 -06:00
option AllowNoInt 'yes'
Increase Supernode pollrate (#984) * Bump the OLSR poll rate on supernodes
2023-12-06 13:14:17 -07:00
option Pollrate '<olsrd_pollrate>'
Fixes issue where packets route to wrong interface on mesh nodes. see BBHN->ticket:35
2014-04-04 20:34:15 -06:00
Merge SDWG Mesh progress with 1.0.0 BBHN Includes removing files that are provided by packages instead of being embedded as binaries. Changes made for UBNT hardware AND for newer base openwrt (Backfire)
2013-12-02 13:04:54 -07:00
config LoadPlugin
option library 'olsrd_arprefresh.so.0.1'
config LoadPlugin
package: olsr: AREDN upgrade to 0.9.6.2
2018-03-29 22:03:16 -06:00
option library 'olsrd_txtinfo.so.1.1'
Merge SDWG Mesh progress with 1.0.0 BBHN Includes removing files that are provided by packages instead of being embedded as binaries. Changes made for UBNT hardware AND for newer base openwrt (Backfire)
2013-12-02 13:04:54 -07:00
option accept '0.0.0.0'
feature: add jsoninfo to olsr and open firewall ports 9090
2016-01-05 11:00:22 -07:00
config LoadPlugin
package: olsr: AREDN upgrade to 0.9.6.2
2018-03-29 22:03:16 -06:00
option library 'olsrd_jsoninfo.so.1.1'
feature: add jsoninfo to olsr and open firewall ports 9090
2016-01-05 11:00:22 -07:00
option accept '0.0.0.0'
Merge SDWG Mesh progress with 1.0.0 BBHN Includes removing files that are provided by packages instead of being embedded as binaries. Changes made for UBNT hardware AND for newer base openwrt (Backfire)
2013-12-02 13:04:54 -07:00
config LoadPlugin
option library 'olsrd_dot_draw.so.0.3'
Remove xinetd (which has little to do) (#292) Switch olsrd dot_draw plugin to directly accept connections and not pass through xinetd.
2022-03-14 20:23:03 -06:00
option accept '0.0.0.0'
option port '2004'
Merge SDWG Mesh progress with 1.0.0 BBHN Includes removing files that are provided by packages instead of being embedded as binaries. Changes made for UBNT hardware AND for newer base openwrt (Backfire)
2013-12-02 13:04:54 -07:00
aredn: olsrd: add olsrd watchdog Adding native olsrd watchdog on top of procd ensures mesh nodes are always accessable. closes #338
2019-01-25 23:13:13 -07:00
config LoadPlugin
option library 'olsrd_watchdog.so.0.1'
option file '/tmp/olsrd.watchdog'
option interval '5'
Merge SDWG Mesh progress with 1.0.0 BBHN Includes removing files that are provided by packages instead of being embedded as binaries. Changes made for UBNT hardware AND for newer base openwrt (Backfire)
2013-12-02 13:04:54 -07:00
config Interface
list interface 'wifi'
Half the OLSR maintenance traffic (#1130)
2024-03-27 18:01:00 -06:00
option HelloInterval '<hello_interval>'
option TcInterval '<tc_interval>'
option MidInterval '<mid_interval>'
option HnaInterval '<hna_interval>'
Add new feature device-to-device linking (dtdlink) The dtdlink interface is vlan 2 on eth0 and is used for linking two or more devices together. This will allow for band-to-band repeaters, sector antenna setups, etc. see BBHN->ticket:28
2014-04-09 00:19:45 -06:00
config Interface
Half the OLSR maintenance traffic (#1130)
2024-03-27 18:01:00 -06:00
list interface 'dtdlink'
option Mode '<olsrd_dtd_interface_mode>'
option HelloInterval '<hello_interval>'
option TcInterval '<tc_interval>'
option MidInterval '<mid_interval>'
option HnaInterval '<hna_interval>'