aredn/patches/742-5-and-10mhz-ath10k-ct-s...

344 lines
12 KiB
Diff
Raw Normal View History

Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574) * Update to Openwrt 21.02 and add support for the CPE710 v1 Update scripts to change references to ifname to device due to a change in Openwrt naming reverse-wpad-basic-wolfssl and disable SSL on Curl NOTE: The compile host must have python3-distutils installed for gpsd to build * aredn: initial working upgrade to openwrt 21.02.1 * aredn: update 1 to working upgrade to openwrt 21.02.1 * aredn: add cpe710v1 to build config * Andrew's patches * Remove duplicates + display perl * Temp disable wifi extension patch * ifname/ports support * Add spectrum patch back in * Generic function to extra interfaces * New api to get wifi ifname * Disables jails * Style link * aredn: partial upgrade to openwrt 22.0.3.0 added AC device images and partial migration to 22.0.3.0 firewall upgrade pending * aredn: update mesh-release and revert config.mk * Unused * NFT firewall rewrite * Common-isze configs * Fix network layout for hap2 * Use local packages dev (new firewall rules) * Add HAP2 * Add pause after network restart to let bridge reinitialize * Various lua fixes for new lua version * Tweak config * Re-fix networking (lost patch change) * Add new radio names * Tolerate missing wifi * Fix hap-lite switch setup * More devices * New radio id * Build Rocket 5AC lite * Remove need for luci.sys * Remove need for luci.sys * Explicitly name wlan interfaces * Handle different compatibility verisoning * Update networking for switches * ipref version bump * Extra flag for curl * Better compat_version fix * Remove wolfssl * Fix dns server * Fix device name * Unused * Remove things we dont need * Remove unused packages * Generic macaddr overrides * Fix uci commit * Fix luci.template.parser to avoid luci.http loading the real thing * Rocket-M build * Add search-domain dhcp option * Turn of ipv6 * No IPV6 in dnsmasq * Override mac addresses if devices all the same * Working from master (for now) * Put back hostap * Disable old ethmac fixup * Tweak configs * Move back to v22.03.2 Leave ipq4019 builds to master * Need IPV6 to compile nft firewall * Rocket-M fixes * Before we start * WIP * Working snapshot * Cleaned patches * Merged patch * Single patch to support HAP2 * Fix typo * Add nanostation-m * 5/10Mhz patch * 5+10MHz patch for ath10k-ct driver * Extend 2Ghz channel check to include -4 to -1 * Add chanbw setup for ath10k (like ath9k) * Added TP-Link CPE710 v1 * Override firmwares * Missing patch * Dropbear config like 3.22.8.0 * Add Ubiquiti Rocket 5AC Lite * Fix c6 * Update * Need more scan channels * Remove IPV6 * Improve mac fixups * Put back missing nft app * IPv6 removed so dont have to disable it * Fix rocket-m flash bug * Fix nanostation-m * Nanobridge is tiny * Fix wifi order for ar750 * Rocket M5 XW support * New rates * Fix firewall4 so we don't need IPv6 * Allow channel width to be restricted * Move channel list into library * Fix naming * Mechanism to block specific channels on specific radios * Refresh buttons * routerboard-sxt-5nd * CPE605 v1.0 * Improve rocket m xw * tpink * Update patch * Update to remove disable * Remove BW restrictions on cpe710 * Restrict to what has been tested * Remove test BW restrictions * sxtsq-5-ac * Update * Update * powerbeam-m5-300 support * Fix * Fix hap2 * Tidy unused patches * Remove limit * Add ubnt_bullet-m-ar7241 * Added ubnt_nanobeam-ac-gen2 * Fix typo * Tolerate missing dtd ip * Explicitly gix hap2 mac addresses * Fix some broken patches * Hap2 wont work at 5MHz * Ubiquiti LiteBeam 5AC Gen2 * Fix compat_version for sxt 5ac * Update patch * Unused * Fix lan configuration for some devices * Rolling average of noise level * Unused * Split out the ath10k rssi monitor (its very simple at the moment) * Ignore .DS_Store * Reboot if ethernet doesnt come up (but only once!) * reboot returns - add exit * Add some logging info * Fix ] * Check all possibly ethernet bridges * Improve mac fixing * Remove HostAP on small memory devices * Reduce dropbear footprint * Add setsid * Kill hostap when upgrading to save memory * Different way to detect hostapd unavailable * New build steps * Improve manager logging * Fix name conflict for the two monitors * Try to improve test mesh name resolve problem * Migrate tiny to generic (tiny doesnt work properly) * Typo * Another attempt to fix macs for Mikrotik * Protect against missing trackers * Fix wpad for ipq40xx * Remove old tunnel check code * Enable ZRAM swap to aid low memory devices * ath10k noise can something be out of range - protect against that * Updated with current devices and status * Update firmware which has been tested * Updated with more builds * More binary/README * Fix css error * Start noise at sensible base level * Unfix the css so it looks how it use to. * Save as much memory as we can on lowmem nodes * Hide some options on low memory devices * Add "eol" to 32MB devices * Restart network rather than reboot node if it seems to be broken * Fixes * Revert network reset * Fix ar750 networking * Continue to trim tiny configs * More devices * Dump IW output messages * Fix Rocket 5AC intermittent ethernet issue * Ethernet fix for PowerBeam 5AC 500 * More tiny size reduction * More support data * Fixed POE and USB power features * Add Ubiquiti NanoBeam AC (gen1) * NanoStation (not NanoBeam) * Add mii-tool package * Device updates * Bump update time to 5 minutes * Fix ethernet negotiation for rocker-5ac and nanobeam * Fix iplookup * Config changes based on call feedback * Radio listing fixes * Update with more untested builds * Fallback TxMbps extracted from iw station dump * Fix tunnel detection for low memory nodes * Remove unused feed packages * snapshot build * Update stability info * Add powerbeam-5ac-500 * Typo * Add missing 3.22.1.0 * Add MikroTik LHG 5 AC * Fix permissions * Fix permissions * AirGrid's take Bullet builds * Mikrotik AC3 * Improve supportdata structure a little to make it easier to find things * Restore WAN VLAN overrides * Fix vlan regex for hap2 and hap3 * Support old and new style poe controls * hap-ac3 is version 1.1 * Handle typo in some openwrt config files * Fix HAP AC3 install * Update hap ac3 status * Support user overrides for network ports (non-swconfig devices) * LHG 5AC support * Remove -nand * Remove non-working platform.sh change * tunnel weight override * Omit LinkQualityMult when value is 1 * Add mANTBox 19s and 15s * Support ath79 mikrotik devices which require ath10k in the initramfs Co-authored-by: apcameron <apcameron@softhome.net> Co-authored-by: Joe AE6XE <ae6xe@arrl.net> Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 13:22:49 -07:00
Index: openwrt/package/kernel/ath10k-ct/patches/999-0002-ath10k-5_10Mhz.patch
===================================================================
--- /dev/null
+++ openwrt/package/kernel/ath10k-ct/patches/999-0002-ath10k-5_10Mhz.patch
@@ -0,0 +1,272 @@
+diff -urpN a/ath10k-5.15/debug.c b/ath10k-5.15/debug.c
+--- a/ath10k-5.15/debug.c 2022-05-13 22:42:36.000000000 +0100
++++ b/ath10k-5.15/debug.c 2022-11-29 12:22:12.836789627 +0000
+@@ -4403,6 +4403,54 @@ static const struct file_operations fops
+ .llseek = default_llseek,
+ };
+
++static ssize_t read_file_chan_bw(struct file *file, char __user *user_buf,
++ size_t count, loff_t *ppos)
++{
++ struct ath10k *ar = file->private_data;
++ struct ath_common *common = &ar->ath_common;
++ char buf[32];
++ unsigned int len;
++
++ len = sprintf(buf, "0x%08x\n", common->chan_bw);
++ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
++}
++
++int ath10k_update_channel_list(struct ath10k *ar);
++
++static ssize_t write_file_chan_bw(struct file *file, const char __user *user_buf,
++ size_t count, loff_t *ppos)
++{
++ struct ath10k *ar = file->private_data;
++ struct ath_common *common = &ar->ath_common;
++ unsigned long chan_bw;
++ int ret;
++ char buf[32];
++ ssize_t len;
++
++ len = min(count, sizeof(buf) - 1);
++ if (copy_from_user(buf, user_buf, len))
++ return -EFAULT;
++
++ buf[len] = '\0';
++ if (kstrtoul(buf, 0, &chan_bw))
++ return -EINVAL;
++
++ common->chan_bw = chan_bw;
++ ret = ath10k_update_channel_list(ar);
++ if (ret)
++ ath10k_warn(ar, "failed to update channel list: %d\n", ret);
++
++ return count;
++}
++
++static const struct file_operations fops_chanbw = {
++ .read = read_file_chan_bw,
++ .write = write_file_chan_bw,
++ .open = simple_open,
++ .owner = THIS_MODULE,
++ .llseek = default_llseek,
++};
++
+ int ath10k_debug_create(struct ath10k *ar)
+ {
+ ar->debug.cal_data = vzalloc(ATH10K_DEBUG_CAL_DATA_LEN);
+@@ -4451,6 +4499,9 @@ int ath10k_debug_register(struct ath10k
+ init_completion(&ar->debug.ratepwr_tbl_complete);
+ init_completion(&ar->debug.powerctl_tbl_complete);
+
++ debugfs_create_file("chanbw", S_IRUSR | S_IWUSR, ar->debug.debugfs_phy,
++ ar, &fops_chanbw);
++
+ debugfs_create_file("fw_stats", 0400, ar->debug.debugfs_phy, ar,
+ &fops_fw_stats);
+
+diff -urpN a/ath10k-5.15/mac.c b/ath10k-5.15/mac.c
+--- a/ath10k-5.15/mac.c 2022-11-29 12:18:41.281151667 +0000
++++ b/ath10k-5.15/mac.c 2022-11-29 12:21:15.199940728 +0000
+@@ -697,6 +697,8 @@ chan_to_phymode(const struct cfg80211_ch
+ switch (chandef->chan->band) {
+ case NL80211_BAND_2GHZ:
+ switch (chandef->width) {
++ case NL80211_CHAN_WIDTH_5:
++ case NL80211_CHAN_WIDTH_10:
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ if (chandef->chan->flags & IEEE80211_CHAN_NO_OFDM)
+ phymode = MODE_11B;
+@@ -716,6 +718,8 @@ chan_to_phymode(const struct cfg80211_ch
+ break;
+ case NL80211_BAND_5GHZ:
+ switch (chandef->width) {
++ case NL80211_CHAN_WIDTH_5:
++ case NL80211_CHAN_WIDTH_10:
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ phymode = MODE_11A;
+ break;
+@@ -1311,6 +1315,16 @@ static int ath10k_monitor_vdev_start(str
+ arg.channel.max_reg_power = channel->max_reg_power * 2;
+ arg.channel.max_antenna_gain = ath10k_get_max_antenna_gain(ar,
+ channel->max_antenna_gain);
++ arg.channel.quarter = false;
++ arg.channel.half = false;
++ if (ar->ath_common.chan_bw == 5)
++ arg.channel.quarter = true;
++ else if (ar->ath_common.chan_bw == 10)
++ arg.channel.half = true;
++ else if (chandef->width == NL80211_CHAN_WIDTH_5)
++ arg.channel.quarter = true;
++ else if (chandef->width == NL80211_CHAN_WIDTH_10)
++ arg.channel.half = true;
+
+ reinit_completion(&ar->vdev_setup_done);
+ reinit_completion(&ar->vdev_delete_done);
+@@ -1756,6 +1770,21 @@ static int ath10k_vdev_start_restart(str
+ }
+ }
+
++ arg.channel.quarter = false;
++ arg.channel.half = false;
++ if (ar->ath_common.chan_bw == 5)
++ arg.channel.quarter = true;
++ else if (ar->ath_common.chan_bw == 10)
++ arg.channel.half = true;
++ else if (chandef->width == NL80211_CHAN_WIDTH_5) {
++ arg.channel.quarter = true;
++ ar->ath_common.chan_bw = 5;
++ }
++ else if (chandef->width == NL80211_CHAN_WIDTH_10) {
++ arg.channel.half = true;
++ ar->ath_common.chan_bw = 10;
++ }
++
+ if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+ arg.ssid = arvif->u.ap.ssid;
+ arg.ssid_len = arvif->u.ap.ssid_len;
+@@ -4097,7 +4126,7 @@ static int ath10k_station_disassoc(struc
+ /* Regulatory */
+ /**************/
+
+-static int ath10k_update_channel_list(struct ath10k *ar)
++int ath10k_update_channel_list(struct ath10k *ar)
+ {
+ struct ieee80211_hw *hw = ar->hw;
+ struct ieee80211_supported_band **bands;
+@@ -4174,6 +4203,12 @@ static int ath10k_update_channel_list(st
+ ch->max_antenna_gain = ath10k_get_max_antenna_gain(ar,
+ channel->max_antenna_gain);
+ ch->reg_class_id = 0; /* FIXME */
++ ch->half = false;
++ ch->quarter = false;
++ if (ar->ath_common.chan_bw == 5)
++ ch->quarter = true;
++ else if (ar->ath_common.chan_bw == 10)
++ ch->half = true;
+
+ /* FIXME: why use only legacy modes, why not any
+ * HT/VHT modes? Would that even make any
+@@ -5841,6 +5876,7 @@ static void ath10k_mac_setup_ht_vht_cap(
+ if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
+ band = &ar->mac.sbands[NL80211_BAND_2GHZ];
+ band->ht_cap = ht_cap;
++ band->vht_cap = vht_cap;
+
+ /* Enable the VHT support at 2.4 GHz */
+ band->vht_cap = vht_cap;
+@@ -7179,7 +7215,7 @@ static void ath10k_mac_op_set_coverage_c
+ if (value != ar->fw_coverage.coverage_class)
+ ar->eeprom_overrides.coverage_already_set = false; /* value is being changed */
+ mutex_unlock(&ar->conf_mutex);
+-
++
+ ar->hw_params.hw_ops->set_coverage_class(ar, value);
+ }
+
+@@ -7319,6 +7355,11 @@ static int ath10k_hw_scan(struct ieee802
+ arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
+ }
+
++ if (ar->ath_common.chan_bw == 5)
++ arg.scan_ctrl_flags |= WMI_SCAN_FLAG_QUARTER_RATE_SUPPORT;
++ else if (ar->ath_common.chan_bw == 10)
++ arg.scan_ctrl_flags |= WMI_SCAN_FLAG_HALF_RATE_SUPPORT;
++
+ if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
+ arg.scan_ctrl_flags |= WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ;
+ ether_addr_copy(arg.mac_addr.addr, req->mac_addr);
+@@ -8849,6 +8890,10 @@ static int ath10k_remain_on_channel(stru
+ arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
+ arg.scan_ctrl_flags |= WMI_SCAN_FILTER_PROBE_REQ;
+ arg.burst_duration_ms = duration;
++ if (ar->ath_common.chan_bw == 5)
++ arg.scan_ctrl_flags |= WMI_SCAN_FLAG_QUARTER_RATE_SUPPORT;
++ else if (ar->ath_common.chan_bw == 10)
++ arg.scan_ctrl_flags |= WMI_SCAN_FLAG_HALF_RATE_SUPPORT;
+
+ if (ath10k_mac_vif_has_any_cck(ar, vif, (1 << chan->band)))
+ arg.scan_ctrl_flags |= WMI_SCAN_ADD_CCK_RATES;
+@@ -11296,6 +11341,7 @@ int ath10k_mac_register(struct ath10k *a
+ ieee80211_hw_set(ar->hw, TDLS_WIDER_BW);
+ }
+
++ ar->hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ;
+ if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, ar->wmi.svc_map))
+ ieee80211_hw_set(ar->hw, SUPPORTS_TDLS_BUFFER_STA);
+
+diff -urpN a/ath10k-5.15/spectral.c b/ath10k-5.15/spectral.c
+--- a/ath10k-5.15/spectral.c 2022-11-29 12:18:41.285151725 +0000
++++ b/ath10k-5.15/spectral.c 2022-11-29 12:21:15.199940728 +0000
+@@ -90,6 +90,12 @@ int ath10k_spectral_process_fft(struct a
+ * but the results/plots suggest that its actually 22/44/88 MHz.
+ */
+ switch (phyerr->chan_width_mhz) {
++ case 5:
++ fft_sample->chan_width_mhz = 5;
++ break;
++ case 10:
++ fft_sample->chan_width_mhz = 11;
++ break;
+ case 20:
+ fft_sample->chan_width_mhz = 22;
+ break;
+diff -urpN a/ath10k-5.15/wmi.c b/ath10k-5.15/wmi.c
+--- a/ath10k-5.15/wmi.c 2022-11-29 12:18:41.277151608 +0000
++++ b/ath10k-5.15/wmi.c 2022-11-29 12:21:15.203940797 +0000
+@@ -1786,6 +1786,10 @@ void ath10k_wmi_put_wmi_channel(struct a
+ flags |= WMI_CHAN_FLAG_HT40_PLUS;
+ if (arg->chan_radar)
+ flags |= WMI_CHAN_FLAG_DFS;
++ if (arg->quarter)
++ flags |= WMI_CHAN_FLAG_QUARTER;
++ else if (arg->half)
++ flags |= WMI_CHAN_FLAG_HALF;
+
+ ch->band_center_freq2 = 0;
+
+@@ -8546,6 +8550,12 @@ ath10k_wmi_op_gen_scan_chan_list(struct
+ for (i = 0; i < arg->n_channels; i++) {
+ ch = &arg->channels[i];
+ ci = &cmd->chan_info[i];
++ ch->quarter = false;
++ ch->half = false;
++ if (ar->ath_common.chan_bw == 5)
++ ch->quarter = true;
++ else if (ar->ath_common.chan_bw == 10)
++ ch->half = true;
+
+ ath10k_wmi_put_wmi_channel(ar, ci, ch, -1);
+ }
+diff -urpN a/ath10k-5.15/wmi.h b/ath10k-5.15/wmi.h
+--- a/ath10k-5.15/wmi.h 2022-11-29 12:18:41.277151608 +0000
++++ b/ath10k-5.15/wmi.h 2022-11-29 12:21:15.207940866 +0000
+@@ -2146,6 +2146,8 @@ struct wmi_channel_arg {
+ bool allow_ht;
+ bool allow_vht;
+ bool ht40plus;
++ bool quarter;
++ bool half;
+ bool chan_radar;
+ /* note: power unit is 0.5 dBm */
+ u32 min_power;
+@@ -3431,6 +3433,18 @@ struct wmi_start_scan_arg {
+ * Allow the driver to have influence over that.
+ */
+ #define WMI_SCAN_CONTINUE_ON_ERROR 0x80
++/** set scan with promiscous mode */
++#define WMI_SCAN_PROMISCOUS_MODE 0x80
++/** allow capture ppdu with phy errrors */
++#define WMI_SCAN_CAPTURE_PHY_ERROR 0x100
++/** always do passive scan on passive channels */
++#define WMI_SCAN_FLAG_STRICT_PASSIVE_ON_PCHN 0x200
++/** set HALF (10MHz) rate support */
++#define WMI_SCAN_FLAG_HALF_RATE_SUPPORT 0x20000
++/** set Quarter (5MHz) rate support */
++#define WMI_SCAN_FLAG_QUARTER_RATE_SUPPORT 0x40000
++/** WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
++#define WMI_SCAN_CLASS_MASK 0xFF000000
+
+ /* Use random MAC address for TA for Probe Request frame and add
+ * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
--- /dev/null
+++ openwrt/package/kernel/ath10k-ct/patches/999-0004-ath10k-coverage.patch
Initial OpenWRT 23.05.0 merge (#963) * Initial OpenWRT 23.05.0 merge * Fix get_rfchannels for new iwinfo format * Fix initial wlan name * Move patches to 5.15 from 5.10 * Fix flash write problem on Ubiquiti devices * Use new ssl patch * Reduce binary sizes * Have to have hostapd installed now, even on tiny builds * Simplify device support * Revert Mikrotik NAND sysupgrade system. OpenWRT doesnt really support Mikrotik NAND devices after 2019 and the new support appeared broken. So reverted to the 2022 mechanism which does work and avoid upgrade problems. * Fixes for tiny builds * More tiny shrinking * Fix newly added firewall rules * Update permanent packages * Update permanent packages * Support for Nanobeam 2AC (2.4GHz) device. 20MHz channels only. * Update support * Add GL.iNet B1300 * Add to radios.json * Update supported devices * Dont force the LAN DHCP to run * Revert CURL SSL test * Fix radio count when there are no radios * Switch the lan ports on the gl-b1300 * Add support for GL.iNET Beryl MT1300 * Fix visual lat/lon setting bug * Make the setup "Save Changes" button also save the location data * Fix location/map system with geo location fallback * Recolor * Fix default bandwidth selection * Support multi-band radios * Generic mechanism to set compat version to 1.1 * Switch ethernet ports * 20 MHz channels only * Update docs * Add ham channels to Mediatek chips (20MHz only) * Automatically update the permpkg list when we upgrade * Fix 10MHz mode for Ubiquiti AC devices * Fix tiny builds * Bump the watch timeout for restarting olsrd olsrd is reliable these days, and very occasionally this was restarting it unnecessarily
2023-12-06 11:12:11 -07:00
@@ -0,0 +1,34 @@
+--- a/ath10k-5.15/hw.c
++++ b/ath10k-5.15/hw.c
+@@ -655,23 +655,6 @@
+ slottime_reg = ar->fw_coverage.reg_slottime_orig;
+ timeout_reg = ar->fw_coverage.reg_ack_cts_timeout_orig;
+
+- /* Do some sanity checks on the slottime register. */
+- if (slottime_reg % phyclk) {
+- ath10k_warn(ar,
+- "failed to set coverage class: expected integer microsecond value in register\n");
+-
+- goto store_regs;
+- }
+-
+- slottime = MS(slottime_reg, WAVE1_PCU_GBL_IFS_SLOT);
+- slottime = slottime / phyclk;
+- if (slottime != 9 && slottime != 20) {
+- ath10k_warn(ar,
+- "failed to set coverage class: expected slot time of 9 or 20us in HW register. It is %uus.\n",
+- slottime);
+-
+- goto store_regs;
+- }
+
+ /* Recalculate the register values by adding the additional propagation
+ * delay (3us per coverage class).
Initial OpenWRT 23.05.0 merge (#963) * Initial OpenWRT 23.05.0 merge * Fix get_rfchannels for new iwinfo format * Fix initial wlan name * Move patches to 5.15 from 5.10 * Fix flash write problem on Ubiquiti devices * Use new ssl patch * Reduce binary sizes * Have to have hostapd installed now, even on tiny builds * Simplify device support * Revert Mikrotik NAND sysupgrade system. OpenWRT doesnt really support Mikrotik NAND devices after 2019 and the new support appeared broken. So reverted to the 2022 mechanism which does work and avoid upgrade problems. * Fixes for tiny builds * More tiny shrinking * Fix newly added firewall rules * Update permanent packages * Update permanent packages * Support for Nanobeam 2AC (2.4GHz) device. 20MHz channels only. * Update support * Add GL.iNet B1300 * Add to radios.json * Update supported devices * Dont force the LAN DHCP to run * Revert CURL SSL test * Fix radio count when there are no radios * Switch the lan ports on the gl-b1300 * Add support for GL.iNET Beryl MT1300 * Fix visual lat/lon setting bug * Make the setup "Save Changes" button also save the location data * Fix location/map system with geo location fallback * Recolor * Fix default bandwidth selection * Support multi-band radios * Generic mechanism to set compat version to 1.1 * Switch ethernet ports * 20 MHz channels only * Update docs * Add ham channels to Mediatek chips (20MHz only) * Automatically update the permpkg list when we upgrade * Fix 10MHz mode for Ubiquiti AC devices * Fix tiny builds * Bump the watch timeout for restarting olsrd olsrd is reliable these days, and very occasionally this was restarting it unnecessarily
2023-12-06 11:12:11 -07:00
+@@ -719,7 +719,6 @@
+
+ ath10k_wmi_dbglog_cfg(ar, fw_dbglog_mask, fw_dbglog_level);
+
+-store_regs:
+ /* After an error we will not retry setting the coverage class. */
+ spin_lock_bh(&ar->data_lock);
+ ar->fw_coverage.coverage_class = value;
--- /dev/null
--- openwrt/package/kernel/ath10k-ct/patches/999-0005-ath10k-force-ibss.patch
@@ -0,0 +1,10 @@
+--- a/ath10k-5.15/mac.c
++++ b/ath10k-5.15/mac.c
+@@ -11533,6 +11533,7 @@
+ } else {
+ ret = ath10k_copy_comb(ar, ath10k_10x_if_comb,
+ ARRAY_SIZE(ath10k_10x_if_comb));
++ ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
+ }
+ break;
+ case ATH10K_FW_WMI_OP_VERSION_10_4:
--- /dev/null
+++ openwrt/package/kernel/ath10k-ct/patches/999-0006-ath10k-no-noisy-warning.patch
@@ -0,0 +1,13 @@
+--- a/ath10k-5.15/htt_rx.c
++++ b/ath10k-5.15/htt_rx.c
+@@ -4173,8 +4173,8 @@
+ spin_lock_bh(&ar->data_lock);
+ peer = ath10k_peer_find_by_id(ar, peer_id);
+ if (!peer || !peer->sta) {
+- ath10k_warn(ar, "Invalid peer id %d in peer stats buffer\n",
+- peer_id);
++ /* ath10k_warn(ar, "Invalid peer id %d in peer stats buffer\n",
++ peer_id); */
+ goto out;
+ }
+