aredn/files/www/cgi-bin/admin

#!/usr/bin/lua
--[[

	Part of AREDN® -- Used for creating Amateur Radio Emergency Data Networks
	Copyright (C) 2021 Tim Wilkinson
	Original Perl Copyright (C) 2015 Conrad Lara
	See Contributors file for additional contributors

	This program is free software: you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation version 3 of the License.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program.  If not, see <http://www.gnu.org/licenses/>.

	Additional Terms:

	Additional use restrictions exist on the AREDN® trademark and logo.
		See AREDNLicense.txt for more info.

	Attributions to the AREDN® Project must be retained in the source code.
	If importing this code into a new or existing project attribution
	to the AREDN® project must be added to the source code.

	You must not misrepresent the origin of the material contained within.

	Modified versions must be modified to attribute to the original source
	and be marked in reasonable ways as differentiate it from the original
	version

--]]

require("nixio")
require("aredn.hardware")
require("aredn.http")
require("aredn.utils")
require("aredn.html")
require("uci")
require("aredn.info")
require("ubus")
require("luci.jsonc")

local html = aredn.html

local cursor = uci.cursor()
local conn = ubus.connect()

-- handle firmware updates
local fw_install = false
local fw_output = {}
local fw_versions = {}
local fw_names = {}
local fw_version = ""

function fwout(msg)
    fw_output[#fw_output + 1] = msg
end

function get_default_gw()
    -- a node with a wired default gw will route via this
    local p = io.popen("ip route list table 254")
    if p then
        for line in p:lines()
        do
            local gw = line:match("^default%svia%s([%d%.]+)")
            if gw then
                p:close()
                return gw
            end
        end
        p:close()
    end
    -- table 31 is populated by OLSR
    p = io.popen("ip route list table 31")
    if p then
        for line in p:lines()
        do
            local gw = line:match("^default%svia%s([%d%.]+)")
            if gw then
                p:close()
                return gw
            end
        end
        p:close()
    end
    return "none"
end

function word_wrap(len, lines)
    local output = ""
    for _, str in ipairs(lines)
    do
        while #str > len
        do
            local str1 = str:sub(1, len)
            local str2 = str:sub(len + 1)
            local m, x = str1:match("^(.*)%s(%S+)$")
            if m then
                output = output .. m .. "\n"
                str = x .. str2
            else
                output = output .. str1 .. "\n"
                str = str2
            end
        end
        output = output .. str .. "\n"
    end
    return output:sub(1, #output - 1)
end

function print_firmware_notice(reboot_when, href_addr, text_addr)
    html.print([[
	<center><h2>Firmware will be written in the background.</h2>
	<h3>If your computer is connected to the LAN of this node you may need to acquire<br>
	a new IP address and reset any name service caches you may be using.</h3>
	<h3>The node will reboot ]] .. reboot_when .. [[.<br>
	When the node has finished booting you should ensure your computer has<br>
	received a new IP address and reconnect with<br>
	<a href='http://]] .. href_addr .. [[:8080/'>http://]] .. text_addr .. [[:8080/</a><br>
	This page will automatically reload once the upgrade has completed</h3>
	<br><h3><label for='cdprogress'>Writing firmware: </label><progress id='cdprogress' max='300'/></h3>
	<h1>Time Remaining: <span id='countdown'></h1>
	</center></body></html>
    ]])
end

-- read_postdata
local parms = {}
local firmfile = ""
if os.getenv("REQUEST_METHOD") == "POST" then
    require('luci.http')
    local request = luci.http.Request(nixio.getenv(),
      function()
        local v = io.read(1024)
        if not v then
            io.close()
        end
        return v
      end
    )
    -- only allow file uploading without active tunnels
    local fp
    request:setfilehandler(
        function(meta, chunk, eof)
            if not fp then
                if meta and meta.file then
                    firmfile = meta.file
                    if firmfile:match("sysupgrade%.bin$") or firmfile:match("ext4%-combined%.img%.gz$") then
                        -- Uploading a system upgrade - clear out memory early
                        os.execute("/usr/local/bin/upgrade_prepare.sh stop > /dev/null 2>&1")
                    end
                end
                nixio.fs.mkdir("/tmp/web/upload")
                fp = io.open("/tmp/web/upload/file", "w")
            end
            if chunk then
                fp:write(chunk)
            end
            if eof then
                fp:close()
            end
        end
    )
    parms = request:formvalue()
end

if parms.button_reboot then
    html.reboot()
end
local node = aredn.info.get_nvram("node")
local tmpdir = "/tmp/web/admin"
nixio.fs.mkdir("/tmp/web")
nixio.fs.mkdir("/tmp/web/admin")

-- set the curl command options
local curl = "curl -A 'node: " .. node .. "' "

local serverpaths = {}
local uciserverpath = cursor:get("aredn", "@downloads[0]", "firmwarepath")
if not uciserverpath then
    uciserverpath = ""
end
serverpaths[#serverpaths + 1] = uciserverpath

local hardwaretype = aredn.hardware.get_type()
local targettype = conn:call("system", "board", {}).release.target

local local_firmware = "local_firmware.bin"
local firmware_type = "bin"
if targettype:match("x86") then
    local_firmware = "local_firmware.img.gz"
    firmware_type = "gz"
end

-- handle TPLink and Mikrotik exception conditions
local mfg = aredn.hardware.get_manufacturer()
local mfgprefix = ""
if mfg:match("[Uu]biquiti") then
    mfgprefix = "ubnt"
elseif mfg:match("[Mm]ikro[Tt]ik") then
    mfgprefix = "mikrotik"
elseif mfg:match("[Tt][Pp]-[Ll]ink") then
    mfgprefix = "cpe"
end

-- refresh fw
if parms.button_refresh_fw then
    nixio.fs.remove("/tmp/web/firmware.list")
    if get_default_gw() ~= "none" or uciserverpath:match("%.local%.mesh") then
        fwout("Downloading firmware list from " .. uciserverpath .. "...")
        local config_versions
        local config_serverpath
        for _, serverpath in ipairs(serverpaths)
        do
            config_serverpath = (serverpath:match("^(.*)/firmware") or serverpath) .. "/afs/www/"
            for line in io.popen(curl .. " -o - " .. config_serverpath .. "config.js 2> /dev/null"):lines()
            do
                local v = line:match("versions: {(.+)}")
                if v then
                    config_versions = v
                    break
                end
            end
            if config_versions then
                break
            end
        end
        if not config_versions then
            fwout("Failed to load firmware versions")
        else
            local firmware_versions = {}
            for k, v in config_versions:gmatch("'([^']+)': '([^']+)'")
            do
                firmware_versions[k] = v
            end
            local board_type = aredn.hardware.get_board_type():gsub(",", "_")
            local firmware_list = {}
            for attempt = 1, 3
            do
                for ver, data in pairs(firmware_versions)
                do
                    local raw = io.popen(curl .. " -o - " .. config_serverpath .. data .. "/overview.json 2> /dev/null")
                    local info = luci.jsonc.parse(raw:read("*a") or "")
                    raw:close()
                    if info then
                        firmware_versions[ver] = nil
                        for _, profile in ipairs(info.profiles)
                        do
                            if profile.id == board_type or ((board_type == "qemu" or board_type == "vmware") and profile.id == "generic" and profile.target == "x86/64") then
                                firmware_list[ver] = {
                                    overview = config_serverpath .. data .. "/" .. profile.target .. "/" .. profile.id .. ".json",
                                    target = info.image_url:gsub("{target}", profile.target)
                                }
                                break
                            end
                        end
                    end
                end
            end
            local f = io.open("/tmp/web/firmware.list", "w")
            if f then
                f:write(luci.jsonc.stringify(firmware_list, true))
                f:close()
            end
            local err = false
            for _, _ in pairs(firmware_versions)
            do
                err = true
            end
            if err then
                fwout("Failed to load all firmware versions. List is incomplete")
            else
                fwout("Done")
            end
        end
    else
        fwout("Error: no route to Host")
    end
end

-- generate data structures
-- and set fw_version
--firmware_list_gen()
if nixio.fs.stat("/etc/mesh-release") then
    for line in io.lines("/etc/mesh-release")
    do
        fw_version = line:chomp()
        break
    end
end
local f = io.open("/tmp/web/firmware.list")
if f then
    fw_versions = luci.jsonc.parse(f:read("*a") or "")
    f:close()
    if fw_versions then
        for v, d in pairs(fw_versions)
        do
            fw_names[#fw_names + 1] = v
        end
        -- Sort in version number order (newest at the top) but with nightlies at the bottom
        table.sort(fw_names, function (a, b)
            if a:match("%-") then
                return false
            elseif b:match("%-") then
                return true
            end
            local ai = a:gmatch("(%d+)")
            local bi = b:gmatch("(%d+)")
            while true
            do
                local va = tonumber(ai() or nil)
                local vb = tonumber(bi() or nil)
                if not va then
                    return false
                elseif not vb then
                    return true
                elseif va < vb then
                    return false
                elseif va > vb then
                    return true
                end
            end
            return false
        end)
    end
end

-- sideload fw
if parms.button_apply_fw and nixio.fs.stat("/tmp/web/" .. local_firmware) then
    nixio.fs.mkdir("/tmp/web/upload")
    os.execute("mv -f /tmp/web/" .. local_firmware .. " /tmp/web/upload/file")
    if firmware_type == "gz" then
        firmfile = "arednmesh-sideload-ext4-combined.img.gz"
    else
        firmfile = "arednmesh-sideload-sysupgrade.bin"
    end
    parms.button_ul_fw = "Upload"
    os.execute("/usr/local/bin/upgrade_prepare.sh stop > /dev/null 2>&1")
end

-- upload fw
if parms.button_ul_fw and nixio.fs.stat("/tmp/web/upload/file") then
    os.execute("mv -f /tmp/web/upload/file " .. tmpdir .. "/firmware")
    if firmware_type == "bin" and firmfile:match("sysupgrade%.bin$") then -- full firmware
        fw_install = true
        -- drop the page cache to take pressure off tmps when checking the firmware
        write_all("/proc/sys/vm/drop_caches", "3")
        -- check firmware header
        local fcheck = capture("/usr/local/bin/firmwarecheck.sh " .. tmpdir .. "/firmware")
        if fcheck ~= "" then
            fwout("Firmware CANNOT be updated")
            fwout("firmware file is not valid: " .. fcheck)
            fw_install = false
            nixio.fs.remove(tmpdir .. "/firmware")
            if os.execute("/usr/local/bin/uploadctlservices restore > /dev/null 2>&1") ~= 0 then
                fwout("Failed to restart all services, please reboot this node.")
            end
        end
    elseif firmware_type == "gz" and firmfile:match("ext4%-combined%.img%.gz$") then -- full x86 firmware
        fw_install = true
    else
        fwout("Firmware CANNOT be updated")
        fwout("the uploaded file is not recognized")
        nixio.fs.remove(tmpdir .. "/firmware")
        os.execute("/usr/local/bin/upgrade_prepare.sh restore > /dev/null 2>&1")
        if os.execute("/usr/local/bin/uploadctlservices restore > /dev/null 2>&1") ~= 0 then
            fwout("Failed to restart all services, please reboot this node.")
        end
    end
end

-- download fw
if parms.button_dl_fw and parms.dl_fw ~= "default" then
    if get_default_gw() ~= "none" or uciserverpath:match("%.local%.mesh") then
        nixio.fs.remove(tmpdir .. "/firmware")
        os.execute("/usr/local/bin/uploadctlservices update > /dev/null 2>&1")

        fw_install = false
        local err

        local f = io.popen(curl .. " -o - " .. fw_versions[parms.dl_fw].overview .. " 2> /dev/null")
        local fwinfo = luci.jsonc.parse(f:read("*a") or "")
        f:close()

        if fwinfo then
            local fwimage
            for _, image in ipairs(fwinfo.images)
            do
                if (firmware_type == "bin" and (image.type == "sysupgrade" or image.type == "nand-sysupgrade")) or (firmware_type == "gz" and image.type == "combined") then
                    fwimage = {
                        url = fw_versions[parms.dl_fw].target .. "/" .. image.name,
                        sha = image.sha256
                    }
                    break
                end
            end
            if fwimage then
                -- We shutdown dnsmasq to save memory, so we resolve the URL's IP address before doing that if we can
                local url = fwimage.url
                local host = url:match("^https?://([^/:]+)")
                local headers = ""
                if host then
                    local ip = iplookup(host)
                    if ip then
                        url = url:gsub(host:gsub("%-","%%-"):gsub("%.","%%."), ip)
                        headers = "-H 'Host: " .. host .. "' "
                        os.execute("/usr/local/bin/upgrade_prepare.sh stop > /dev/null 2>&1")
                    end
                end
                if os.execute(curl .. "-o " .. tmpdir .. "/firmware " .. headers .. url .. " > /dev/null 2>>" .. tmpdir .. "/curl.err") ~= 0 then
                    err = "Download failed!\n" .. read_all(tmpdir .. "/curl.err")
                else
                    local sha = capture("sha256sum " .. tmpdir .. "/firmware"):match("^(%S+)")
                    if sha ~= fwimage.sha then
                        err = "firmware file checksum failed"
                    else
                        fw_install = true
                    end
                end
            else
                err = "upgrade is not available"
            end
        else
            err = "the downloaded file cannot be found"
        end

        nixio.fs.remove(tmpdir .. "/curl.err")

        if err then
            fwout("Firmware CANNOT be updated")
            fwout(err)
            os.execute("/usr/local/bin/upgrade_prepare.sh restore > /dev/null 2>&1")
            if os.execute("/usr/local/bin/uploadctlservices restore > /dev/null 2>&1") ~= 0 then
                fwout("Failed to restart all services, please reboot this node.")
            end
            nixio.fs.remove(tmpdir .. "/firmware")
        end
    else
        fwout("Error: no route to Host")
        nixio.fs.remove(tmpdir .. "/curl.err")
    end
end

-- install fw
if fw_install and nixio.fs.stat(tmpdir .. "/firmware") then
    http_header()
    html.print("<!DOCTYPE html PUBLIC \"-//W3C//DTD HTML 4.01 Transitional//EN\">")
    html.print("<html>")
    html.print("<head>")
    html.print("<title>FIRMWARE UPDATE IN PROGRESS</title>")
    html.print("<meta http-equiv='expires' content='0'>")
    html.print("<meta http-equiv='cache-control' content='no-cache'>")
    html.print("<meta http-equiv='pragma' content='no-cache'>")
    html.print("<meta name='robots' content='noindex'>")
    if not nixio.fs.readlink("/tmp/web/style.css") then
        if not nixio.fs.stat("/tmp/web") then
            nixio.fs.mkdir("/tmp/web")
        end
        nixio.fs.symlink("/www/aredn.css", "/tmp/web/style.css")
    end
    -- Show a different reload address if we're running on the ramdisk
    local displayaddress = "192.168.1.1"
    local waitaddress = displayaddress
    if parms.checkbox_keep_settings then
        for line in io.lines("/proc/mounts")
        do
            if line:match("overlay") or line:match("ext4") then
                displayaddress = node .. ".local.mesh"
                waitaddress = nil
                break
            end
        end
    end
    html.print("<style>")
    html.print(read_all("/tmp/web/style.css"))
    html.print("</style>")
    html.wait_for_reboot(120, 300, waitaddress)
    html.print("</head>")
    html.print("<body><center>")
    html.print("<h2>The firmware is being updated.</h2>")
    html.print("<h1>DO NOT REMOVE POWER UNTIL UPDATE IS FINISHED</h1>")
    html.print("</center><br>")
    local upgradecmd = nil
    if parms.checkbox_keep_settings then
        local fin = io.open("/etc/arednsysupgrade.conf", "r")
        if fin then
            local fout = io.open("/tmp/sysupgradefilelist", "w")
            if fout then
                for line in fin:lines()
                do
                    if not line:match("^#") and nixio.fs.stat(line) then
                        fout:write(line .. "\n")
                    end
                end
                fout:close()
                fin:close()
                aredn.info.set_nvram("nodeupgraded", "1")
                if os.execute("tar -czf /tmp/arednsysupgradebackup.tgz -T /tmp/sysupgradefilelist > /dev/null 2>&1") ~= 0 then
                    html.print([[
                        <center><h2>ERROR: Could not backup filesystem.</h2>
                        <h3>An error occured trying to backup the file system. Node will now reboot.
                        </center>
                    ]])
                    html.footer()
                    html.print("</body></html>")
                    http_footer()
                    aredn.info.set_nvram("nodeupgraded", "0")
                    os.execute("reboot >/dev/null 2>&1")
                else
                    print_firmware_notice("twice while the configuration is applied", displayaddress, displayaddress)
                    http_footer()
                    nixio.fs.remove("/tmp/sysupgradefilelist")
                    upgradecmd = "/usr/local/bin/aredn_sysupgrade -f /tmp/arednsysupgradebackup.tgz -q " .. tmpdir .. "/firmware 2>&1 &"
                end
            else
                fin:close()
                html.footer()
                html.print("</body></html>")
                http_footer()
            end
        else
            html.print([[
                <center><h2>ERROR: Failed to create backup.</h2>
                <h3>An error occured trying to backup the file system. Node will now reboot.
                </center>
            ]])
            html.footer()
            html.print("</body></html>")
            http_footer()
            os.execute("reboot >/dev/null 2>&1")
        end
    else
        print_firmware_notice("after the firmware has been written to flash memory", "localnode.local.mesh", "192.168.1.1")
        http_footer()
        upgradecmd = "/usr/local/bin/aredn_sysupgrade -q -n " .. tmpdir .. "/firmware 2>&1 &"
    end
    if upgradecmd then
        os.execute(upgradecmd)
    end
    os.exit()
end

-- handle package actions
local pkg_output = {}
function pkgout(msg)
    pkg_output[#pkg_output + 1] = msg
end

local permpkg = {}
if nixio.fs.stat("/etc/permpkg") then
    for line in io.lines("/etc/permpkg")
    do
        if not line:match("^#") then
            permpkg[line] = true
        end
    end
end

local meshpkgs = capture("grep -q \".local.mesh\" /etc/opkg/distfeeds.conf"):chomp()

function update_advertised_services()
    local script = "/etc/cron.hourly/check-services"
    local stat = nixio.fs.stat(script)
    if stat.type == "reg" and nixio.bit.band(tonumber(stat.modedec, 8), tonumber(111, 8)) ~= 0 then
        os.execute("(cd /tmp;" .. script .. " 2>&1 | logger -p daemon.debug -t " .. script .. ")&")
    end
end

local package_store = "/etc/package_store"
local package_catalog = package_store .. "/catalog.json"

function record_package(op, ipkg, file)
    nixio.fs.mkdir(package_store)
    local catalog = luci.jsonc.parse(read_all(package_catalog) or '{"installed":{}}')
    if op == "upload" then
        local package = ipkg:match("^([^_]+)")
        if package then
            os.execute("/bin/cp -f " .. file .. " " .. package_store .. "/" .. package .. ".ipk")
            catalog.installed[package] = "local"
        end
    elseif op == "download" then
        local result = capture("opkg status " .. ipkg .. " 2>&1")
        local package = result:match("Package: (%S+)")
        if package then
            catalog.installed[package] = "global"
        end
    elseif op == "remove" then
        nixio.fs.remove(package_store .. "/" .. ipkg .. ".ipk")
        catalog.installed[ipkg] = nil
    end
    os.remove(package_catalog)
    for _,_ in pairs(catalog.installed)
    do
        write_all(package_catalog, luci.jsonc.stringify(catalog))
        break
    end
end

-- upload package
if parms.button_ul_pkg and nixio.fs.stat("/tmp/web/upload/file") then
    os.execute("mv -f /tmp/web/upload/file /tmp/web/upload/newpkg.ipk")
    os.execute("/usr/local/bin/uploadctlservices opkginstall > /dev/null 2>&1")
    local result = capture("opkg -force-overwrite install /tmp/web/upload/newpkg.ipk 2>&1")
    if result:match("satisfy_dependencies_for:") or result:match("cannot find dependency") then
        -- dependency failure - silently update dependencies and try again
        os.execute("opkg update > /dev/null 2>&1")
        os.execute("opkg list | grep -v '^ ' | cut -f1,3 -d' ' | gzip -c > /etc/opkg.list.gz")
        result = capture("opkg -force-overwrite install /tmp/web/upload/newpkg.ipk 2>&1")
    end
    pkgout(result)
    record_package("upload", firmfile, "/tmp/web/upload/newpkg.ipk")
    os.execute("rm -rf /tmp/opkg-*")
    nixio.fs.remove("/tmp/web/upload/newpkg.ipk")
    if os.execute("/usr/local/bin/uploadctlservices restore > /dev/null 2>&1") ~= 0 then
        pkgout("Failed to restart all services, please reboot this node.")
    else
        update_advertised_services()
    end
end

-- download package
if parms.button_dl_pkg and parms.dl_pkg ~= "default" then
    if get_default_gw() ~= "none" or meshpkgs ~= "" then
        os.execute("/usr/local/bin/uploadctlservices opkginstall > /dev/null 2>&1")
        local result = capture("opkg -force-overwrite install " .. parms.dl_pkg .. " 2>&1")
        if result:match("satisfy_dependencies_for:") or result:match("cannot find dependency") then
            -- dependency failure - silently update dependencies and try again
            os.execute("opkg update > /dev/null 2>&1")
            os.execute("opkg list | grep -v '^ ' | cut -f1,3 -d' ' | gzip -c > /etc/opkg.list.gz")
            result = capture("opkg -force-overwrite install " .. parms.dl_pkg .. " 2>&1")
        end
        pkgout(result)
        record_package("download", parms.dl_pkg)
        if os.execute("/usr/local/bin/uploadctlservices restore > /dev/null 2>&1") ~= 0 then
            pkgout("Failed to restart all services, please reboot this node.")
        else
            update_advertised_services()
        end
    else
        pkgout("Error: no route to Host")
    end
end

-- refresh package list
if parms.button_refresh_pkg then
    if get_default_gw() ~= "none" or meshpkgs ~= "" then
        pkgout(capture("opkg update 2>&1"))
        os.execute("opkg list | grep -v '^ ' | cut -f1,3 -d' ' | gzip -c > /etc/opkg.list.gz")
    else
        pkgout("Error: no route to Host")
    end
end

-- remove package
if parms.button_rm_pkg and parms.rm_pkg ~= "default" and not permpkg[parms.rm_pkg] then
    local output = capture("opkg remove " .. parms.rm_pkg .. " 2>&1")
    pkgout(output)
    if not output:match("No packages removed") then
        pkgout("Package removed successfully")
        update_advertised_services()
        record_package("remove", parms.rm_pkg)
    end
end

-- generate support data file
if parms.button_support_data then
    os.execute("/www/cgi-bin/supporttool")
end

-- generate data structures

local pkgs = {}
local pkgver = {}
local f = io.popen("opkg list_installed | cut -f1,3 -d' '")
if f then
    for line in f:lines()
    do
        local pkg, ver = line:match("(.+)%s(.+)")
        if ver then
            pkgs[#pkgs + 1] = pkg
            pkgver[pkg] = ver
        end
    end
    f:close()
end

local dl_pkgs = {}
local dlpkgver = {}
if nixio.fs.stat("/etc/opkg.list.gz") then
    local f = io.popen("zcat /etc/opkg.list.gz")
    if f then
        for line in f:lines()
        do
            local pkg, ver = line:match("(.+)%s(.+)")
            if ver and not (pkgver[pkg] and pkgver[pkg] == ver) then
                dl_pkgs[#dl_pkgs + 1] = pkg
                dlpkgver[pkg] = ver
            end
        end
        f:close()
    end
end

-- handle ssh key actions

local key_output = {}
function keyout(msg)
    key_output[#key_output + 1] = msg
end

local keyfile = "/etc/dropbear/authorized_keys"

-- upload key
if parms.button_ul_key and nixio.fs.stat("/tmp/web/upload/file") then
    local count = 0
    if nixio.fs.stat(keyfile) then
        for _ in io.lines(keyfile)
        do
            count = count + 1
        end
    end
    os.execute("grep ^ssh- /tmp/web/upload/file >> " .. keyfile)
    local count = 0
    for _ in io.lines(keyfile)
    do
        count = count - 1
    end
    if count == 0 then
        keyout("Error: file does not appear to be an ssh key file")
        keyout("Authorized keys not changed.")
    else
        keyout("Key installed.")
    end
    nixio.fs.remove("/tmp/web/upload/file")
    if os.execute("/usr/local/bin/uploadctlservices restore > /dev/null 2>&1") ~= 0 then
        keyout("Failed to restart all services, please reboot this node.")
    end
end

-- remove key
if parms.button_rm_key and parms.rm_key ~= "default" and nixio.fs.stat(keyfile) then
    local count = 0
    for _ in io.lines(keyfile)
    do
        count = count + 1
    end
    os.execute("grep -v '" .. parms.rm_key .. "' " .. keyfile .. " > " .. tmpdir .. "/keys")
    os.execute("mv -f " .. tmpdir .. "/keys " .. keyfile)
    for _ in io.lines(keyfile)
    do
        count = count - 1
    end
    if count == 0 then
        keyout("Error: authorized keys were not changed.")
    else
        keyout("Key " .. parms.rm_key .. " removed.")
    end
end

-- generate data structures
local keys = {}
local f = io.open(tmpdir .. "/newkeys", "w")
if f then
    if nixio.fs.stat(keyfile) then
        for line in io.lines(keyfile)
        do
            local type, key, who, extra = line:match("(%S+)%s+(%S+)%s+(%S+)(.*)")
            if extra == "" and who:match(".@.") and type:match("^ssh-") then
                keys[#keys + 1] = who
                f:write(type .. " " .. key .. " " .. who .. "\n")
            end
        end
    end
    f:close()
end

-- sanitize the key file
if nixio.fs.stat(keyfile) and os.execute("diff " .. keyfile .. " " .. tmpdir .. "/newkeys >/dev/null 2>&1") ~= 0 then
    os.execute("mv -f " .. tmpdir .. "/newkeys " .. keyfile)
    keyout("Info: key file sanitized.")
end

remove_all("/tmp/web/upload")
remove_all(tmpdir)

-- generate the page

http_header(true)
html.header(node .. " administration", true)
html.print("<body><center>")
html.alert_banner()
html.print("<form method=post action=admin enctype='multipart/form-data'>")
-- nav
html.navbar_admin("admin")
html.print("<table width=850>")

html.print("<tr><td align=center><a href='/help.html#admin' target='_blank'>Help</a>&nbsp;&nbsp;")
html.print("<input type=submit name=button_reboot value=Reboot style='font-weight:bold' title='Immediately reboot this node'>")
html.print("</td></tr>")
html.print("<tr><td align=center>")

html.print("<table cellspacing=10 width=100%>")

-- firmware

html.print("<tr><td align=center>")
html.print("<table cellspacing=10 width=100%>")
html.print("<tr><th colspan=3 style=background-color:lightseagreen>Firmware Update</th></tr>")

if #fw_output > 0 then
    html.print("<tr><td colspan=3 align=center><table><tr><td><b>")
    html.print("<pre>" .. word_wrap(80, fw_output) .. "</pre>")
    html.print("</b></td></tr></table></td></tr>")
end

html.print("<tr><td align=center colspan=3><b>Current Version:</b> " .. fw_version .. "&nbsp; &nbsp; &nbsp; <b>Hardware Type:</b> (" .. targettype .. ") " .. mfgprefix .. " (" .. hardwaretype .. ")</td></tr>")
html.print("<tr><td align=center colspan=3>Keep Existing Configuration Settings <input type=checkbox name=checkbox_keep_settings checked title='keep existing configuration settings'></td></tr>")

if nixio.fs.stat("/tmp/force-upgrade-this-is-dangerous") then
    html.print("<tr><td align=center colspan=3><span style=background-color:red;font-size:140%;>&nbsp; ALL FIRMWARE UPGRADE COMPATIBILITY CHECKS HAVE BEEN DISABLED &nbsp;</span></td></tr>")
end

html.print("<tr>")
html.print("<td>Upload Firmware</td>")
html.print("<td><input style='width:100%' type=file name=firmfile title='choose the firmware file to install from your hard drive' accept='." .. firmware_type .. "'></td>")
html.print("<td align=center><input type=submit name=button_ul_fw value=Upload title='install the firmware' style='width:90px' onclick='this.value=\"Uploading...\"'></td>")
html.print("</tr>")

html.print("<tr>")
html.print("<td>Download Firmware</td>")
html.print("<td><select name=dl_fw style='font-family:monospace'>")
html.print("<option value=default selected>- Select Firmware -</option>")
for _, fwi in ipairs(fw_names)
do
    html.print("<option value=" .. fwi .. ">" .. fwi .. (fwi:match("%-") and " (nightly)" or "") .. "</option>")
end
html.print("</select>")
html.print("<input type=submit name=button_refresh_fw value=Refresh title='download the list of available firmware versions'>")
html.print("<td align=center><input type=submit name=button_dl_fw value=Download title='install the firmware' style='width:90px' onclick='this.value=\"Downloading...\"'></td>")
html.print("</tr>")

html.print("<tr>")
html.print("<td>Load Local Firmware</td>")
html.print("<td style='font-family:monospace'>")
html.print("<input type=submit name=button_apply_fw value='Apply Local Firmware' title='apply firmware previously uploaded to this node and named as shown' " .. (nixio.fs.stat("/tmp/web/" .. local_firmware) and "" or "disabled") .. ">")
html.print(" /tmp/web/" .. local_firmware .. "</td>")
html.print("</tr>")

html.print("</table></td></tr>")
html.print("<tr><td colspan=3></td></tr>")

-- packages

html.print("<tr><td align=center>")
html.print("<table cellspacing=10 width=100%>")
html.print("<tr><th colspan=3 style=background-color:lightseagreen>Package Management</th></tr>")

-- low memory warning
if isLowMemNode() then
    html.print("<tr><td align=center colspan=3><span style=background-color:cyan;font-size:140%;>&nbsp; Recommend not to install extra packages due to low memory on this node &nbsp;</span></td></tr>")
end

if #pkg_output > 0 then
    -- opkg can produce duplicate first lines, remove them here
    while pkg_output[2] and pkg_output[1] == pkg_output[2]
    do
        pkg_output:remove(1)
    end
    html.print("<tr><td colspan=3 align=center><table><tr><td><b><pre>")
    html.print(word_wrap(80, pkg_output))
    html.print("</pre></b></td></tr></table></td></tr>")
end

html.print("<tr>")
html.print("<td>Upload Package</td>")
html.print("<td><input style='width:100%' type=file name=ul_pkg title='choose the .ipk file to install from your hard drive'> </td>")
html.print("<td align=center><input type=submit name=button_ul_pkg value=Upload title='install the package'>")
html.print("</td>")
html.print("</tr>")

html.print("<tr>")
html.print("<td>Download Package</td>")
html.print("<td><select name=dl_pkg style='font-family:monospace'>")
html.print("<option value=default selected>- Select Package -</option>")
for _, dlp in ipairs(dl_pkgs)
do
    html.print("<option value=" .. dlp .. ">" .. dlp .. " " .. dlpkgver[dlp] .. "</option>")
end
html.print("</select>")
html.print("<input type=submit name=button_refresh_pkg value=Refresh title='download the list of available packages (warning: this takes a lot of space)'>")
html.print("<td align=center><input type=submit name=button_dl_pkg value=Download title='install the package'></td>")
html.print("</tr>")

html.print("<tr>")
html.print("<td>Remove Package</td>")
html.print("<td><select name=rm_pkg style='font-family:monospace'>")
html.print("<option value=default selected>- Select Package -</option>")
for _, pkg in ipairs(pkgs)
do
    html.print("<option value=" .. pkg .. " " .. (permpkg[pkg] and "disabled" or "") .. ">" .. pkg .. " " .. pkgver[pkg] .. "</option>")
end
html.print("</select></td>")
html.print("<td align=center><input type=submit name=button_rm_pkg value=Remove title='remove the selected package'></td>")
html.print("</tr>")

html.print("</table></td></tr>")

html.print("<tr><td colspan=3></td></tr>")

-- ssh keys
html.print("<tr><td align=center>")
html.print("<table cellspacing=10 width=100%>")
html.print("<tr><th colspan=3 style=background-color:lightseagreen>Authorized SSH Keys</th></tr>")

if #key_output > 0 then
    html.print("<tr><td colspan=3 align=center><table><tr><td><b><pre>")
    html.print(word_wrap(80, key_output))
    html.print("</pre></b></td></tr></table></td></tr>")
end

html.print("<tr>")
html.print("<td>Upload Key</td>")
html.print("<td><input style='width:100%' type=file name=sshkey title='choose the id_rsa.pub file to install from your hard drive'></td>")
html.print("<td align=center><input type=submit name=button_ul_key value=Upload title='install the key'")
html.print("></td>")
html.print("</tr>")

html.print("<tr>")
html.print("<td>Remove Key</td>")
html.print("<td><select name=rm_key style='font-family:monospace'>")
html.print("<option value=default selected>- Select Key -</option>")
for _, key in ipairs(keys)
do
    html.print("<option value=" .. key .. ">" .. key .. "</option>")
end
html.print("</select>")
html.print("<td align=center><input type=submit name=button_rm_key value=Remove title='remove the selected key'></td>")
html.print("</tr>")

html.print("</table></td></tr>")

html.print("<tr><td colspan=3></td></tr>")

html.print("<tr><th colspan=3 style=background-color:lightseagreen>Support Data</th></tr>")
html.print("<tr><td colspan=3 align=center><input type=submit name=button_support_data value='Download Support Data' title='Download a Support Data file'></td></tr>")

html.print("<tr><td colspan=3></td></tr>")

html.print("</table>")
html.print("</td></tr>")
html.print("</table>")

html.print("</form>")
html.print("</center>")
html.footer()
html.print("</body>")
html.print("</html>")
http_footer()