diff --git a/files/www/help.html b/files/www/help.html
index e9485f0b..972c8c33 100644
--- a/files/www/help.html
+++ b/files/www/help.html
@@ -279,11 +279,10 @@ In the WiFi box there are settings shown as being
Active Settings. These settings can be changed without rebooting the node by
clicking the Apply button, but unless they are saved they
will revert to the previously saved values after a reboot.
-The Rx Antenna and Tx Antenna settings of
-Right and Left are from the point of view from the front of the router. This
-is valid for the WRT54GL, but it is not unreasonable to expect that they may
-be reversed for some other router models. If you find this to be the case,
-contact the webmaster and it will be accounted for in the firmware.
+The Rx Antenna and Tx Antenna settings are
+named to match either the printed name on the antenna connector or in the
+case of units that have a built in antenna the names are for units mounted
+in its normal orientation.
The Distance setting adjusts the packet retry timer
@@ -699,12 +698,13 @@ How to use failsafe mode:
Now power cycle the node and it should accept your new password.
-But be warned, I have a version 2 wrt54g for which this method does not
-work. Currently it is the only model I am aware of which does not work. If it
-doesn't work, you are Simply Outta Luck unless you can get someone with an
-authorized ssh key to log in to the node and help you. Failing that, your last
-resort is to use the tftp method described in a separate
-article to reinstall the firmware.
+If the device has a reset button you may instead press and hold the reset
+button for 15 seconds which will cause the unit to behave as if it had
+just been flashed with the AREDN™ firmware.
+
+
+You would need to go through the node settings again just as if it was
+the first time installing the AREDN™ firmware on the node.