aredn: aredn.org to arednmesh.org updates

AREDNLicense.txt

@@ -8,18 +8,18 @@ Permission is not granted to use the AREDN(TM) marks for any build
 that has been modified from official source channels. 
 
 The AREDN(TM) trademark and AREDN(TM) logo are property of 
-Randolph Smith and are used with Permission. 
+Amateur Radio Emergency Data Network, Inc. and are used with Permission. 
 
 --- End Additional terms --- 
-Permission of Randolph Smith listed below:
+Permission of Amateur Radio Emergency Data Network, Inc. listed below:
 
-I, Randolph Smith, grant a license to use the ARDEN(TM) trademark in
+Amateur Radio Emergency Data Network, Inc. grants a license to use the AREDN(TM) trademark in
 officially sanctioned AREDN(TM) software releases and promotional material
-including, but not limited to, aredn.com, aredn.net, and aredn.org websites.
+including, but not limited to, the arednmesh.org website.
 Where questions arise as to the licensed use or the validity of an AREDN(TM)
-software release, the decision of Randolph Smith shall be binding. 
+software release, the decision of Amateur Radio Emergency Data Network, Inc. shall be binding. 
 Upon receipt of a demand all use shall cease within 30 days. This license 
 may be terminated for breach of this condition. This grant is made without
 royalty from the licensee and runs for an indefinite term. 
 
-/s/ Randolph Smith
+/s/ Randolph Smith, President, Amateur Radio Emergency Data Network, Inc.

files/www/about.html

@@ -15,6 +15,8 @@
 
 </br>
 Part of AREDN -- Used for creating Amateur Radio Emergency Data Networks</br>
+Copyright (C) 2018 Joe Ayers</br>
+Copyright (C) 2018 Darryl Quinn</br>
 Copyright (C) 2015 Conrad Lara</br>
  See Contributors file for additional contributors</br>
 </br>
@@ -55,14 +57,21 @@ The AREDN&trade; trademark and AREDN&trade; logo and for use in official Amateur
 </br>
 Permission is not granted to use the AREDN&trade; marks for any build that has been modified from official source channels.</br>
 </br>
-The AREDN&trade; trademark and AREDN&trade; logo are property of Randolph Smith and are used with Permission. </br>
+The AREDN&trade; trademark and AREDN&trade; logo are property of Amateur Radio Emergency Data Network, Inc. and are used with Permission. </br>
 </br>
 --- End Additional terms --- </br>
-Permission of Randolph Smith listed below</br>
+Permission of Amateur Radio Emergency Data Network, Inc. listed below:
 </br>
-I, Randolph Smith, grant a license to use the ARDEN&trade; trademark in officially sanctioned AREDN&trade; software releases and promotional material including, but not limited to, aredn.com, aredn.net, and aredn.org websites. Where questions arise as to the licensed use or the validity of an AREDN&trade; software release, the decision of Randolph Smith shall be binding. Upon receipt of a demand all use shall cease within 30 days. This license may be terminated for breach of this condition. This grant is made without royalty from the licensee and runs for an indefinite term. </br>
+Amateur Radio Emergency Data Network, Inc. grants a license to use the AREDN(TM) trademark in
+officially sanctioned AREDN(TM) software releases and promotional material
+including, but not limited to, the arednmesh.org website.
+Where questions arise as to the licensed use or the validity of an AREDN(TM)
+software release, the decision of Amateur Radio Emergency Data Network, Inc. shall be binding.
+Upon receipt of a demand all use shall cease within 30 days. This license
+may be terminated for breach of this condition. This grant is made without
+royalty from the licensee and runs for an indefinite term.
 </br>
-/s/ Randolph Smith</br>
+/s/ Randolph Smith, President, Amateur Radio Emergency Data Network, Inc.
 </br>
 </div>
 </body>

files/www/cgi-bin/admin

@@ -81,7 +81,7 @@ $patch_install = 0;
 %fw_md5 = ();
 
 @serverpaths = (
-    "http://downloads.aredn.org/firmware/ubnt"
+    "http://downloads.arednmesh.org/firmware/ubnt"
 );
 
 # refresh fw

files/www/help.html

@@ -71,7 +71,7 @@ provided through those nodes.
 <li><strong>WiFi Scan</strong> displays a list of other 802.11 signals that the
 node can see and only of the same bandwidth.   The 802.11 signals include
 Access Points (AP), neighbor nodes (connected ad-hoc stations), and other mesh networks 
-(foriegn ad-hoc networks). The AREDN mesh is created on top of an 802.11 'ad-hoc' network.  
+(foriegn ad-hoc networks). The AREDN&trade; mesh is created on top of an 802.11 'ad-hoc' network.  
 Consequently when multiple ad-hoc networks are visiable to each other (different SSID or 
 channel), the 'network' is displayed and not individual nodes (stations).  There is also an 
 automatic scan mode. It is not recommend to run a wifi scan continously because this will degrade mesh 
@@ -137,11 +137,11 @@ temporary files. Memory is the amount of RAM available for running processes.
 <br><br><hr>
 <a name=meshstatus><h2>Mesh Status</h2></a>
 <p>
-The Mesh Status page lists AREDN Mesh Nodes, link quality information, and the services advertised on the Mesh.  There are 3 sections:
+The Mesh Status page lists AREDN&trade; Mesh Nodes, link quality information, and the services advertised on the Mesh.  There are 3 sections:
 </p>
 
 <ul>
-<li><strong>Local Host</strong> is the AREDN Mesh Node showing status and the advertised Services assocated with this Node.<br><br></li>
+<li><strong>Local Host</strong> is the AREDN&trade; Mesh Node showing status and the advertised Services assocated with this Node.<br><br></li>
 
 <li><strong>Current Neighbors</strong> is a list of direct Neighbor Mesh Nodes (1 hop).  This may be via RF, DTDLink (a cat5 cable), or a Tunnel (over Internet connection).  Quality of the link is shown (described below) and advertised Services hosted on the Node or attached to the LAN of the Node are listed.<br><br></li>
 
@@ -399,7 +399,7 @@ entirely different band.  The Mesh Bridge function allows them to communicate.
 <br><br>
 <u>The use of this function requires central coordination.  This is a
 specialized and rarely needed function.  Improper use will cause network
-problems for everyone.  Please contact us at aredn.org to receive a set of
+problems for everyone.  Please contact us at arednmesh.org to receive a set of
 customized network parameters if you have a need to bridge your meshes.</u>
 -->
 </p>
@@ -487,11 +487,11 @@ If you choose, you can specify your latitude, longitude, and gridsquare for loca
 <ul>
 <li>The <strong>Find Me!</strong> button to use your location aware browser to populate the values.  This works very well if you are viewing this page from a mobile device with a built-in GPS.</li>
 <li>Use the <strong>Apply Location Settings</strong> button to persist the lat/lon and gridsquare values.  A "Save Changes" button click is not required for these settings.</li>
-<li>If you have an active internet connection available, the "Show Map" and "Upload Data to AREDN Servers" buttons will become active.</li>
+<li>If you have an active internet connection available, the "Show Map" and "Upload Data to AREDN&trade; Servers" buttons will become active.</li>
 <li>The <strong>Show Map</strong> button will display a map that allows you to click on the position where your node is located, or, to drag an existing marker to a different location on the map.  Both of these activities will automatically update the lat/lon fields on the page.</li>
-<li>The <strong>Upload Data to AREDN Servers</strong> button will send your node information (no highly sensitive data such as passwords are sent) to an AREDN server on the internet. By submitting this information you hereby allow AREDN to publish your node location on a public mapping service and utilize the information for other such reasons as AREDN determines to be useful, including but not limited to statistical analysis.  If you wish to remove your node location from the public mapping service, simply clear/erase your lat/lon values, "Apply Location Settings", and then "Upload Data to AREDN Servers".</li>
+<li>The <strong>Upload Data to AREDN&trade; Servers</strong> button will send your node information (no highly sensitive data such as passwords are sent) to an AREDN&trade; server on the internet. By submitting this information you hereby allow AREDN&trade; to publish your node location on a public mapping service and utilize the information for other such reasons as AREDN&trade; determines to be useful, including but not limited to statistical analysis.  If you wish to remove your node location from the public mapping service, simply clear/erase your lat/lon values, "Apply Location Settings", and then "Upload Data to AREDN&trade; Servers".</li>
 </ul>
-To see a sample of the information that will be sent to the AREDN server, click <a href='http://localnode.local.mesh:8080/cgi-bin/sysinfo.json?hosts=1'>HERE</a> and <a href='http://localnode.local.mesh:9090/topology'>HERE</a>.  (You can replace "localnode" with your ACTUAL node name to see the data from that node.)<br />
+To see a sample of the information that will be sent to the AREDN&trade; server, click <a href='http://localnode.local.mesh:8080/cgi-bin/sysinfo.json?hosts=1'>HERE</a> and <a href='http://localnode.local.mesh:9090/topology'>HERE</a>.  (You can replace "localnode" with your ACTUAL node name to see the data from that node.)<br />
 </p>
 <p>
 You may set the timezone where the node is located as well as setting the NTP server that the node will connect to.  A "Save Changes" button click IS required for timezone and NTS server settings, as well as a subsequent reboot.