diff --git a/files/www/cgi-bin/advancedconfig b/files/www/cgi-bin/advancedconfig
index edf26fa6..0b61ae20 100755
--- a/files/www/cgi-bin/advancedconfig
+++ b/files/www/cgi-bin/advancedconfig
@@ -92,7 +92,7 @@ local settings = {
category = "Link Quality Settings",
key = "aredn.@lqm[0].margin_snr",
type = "string",
- desc = "Margin above minimim SNR a signal must reach to become acceptable",
+ desc = "Margin in dB above minimum SNR a signal must reach to be re-activated",
default = "1",
condition = "lqm_enabled()"
},
@@ -100,7 +100,7 @@ local settings = {
category = "Link Quality Settings",
key = "aredn.@lqm[0].min_distance",
type = "string",
- desc = "Distance neightbor must be over to be acceptable",
+ desc = "Distance in meters neighbor must be over to be activated",
default = "0",
condition = "lqm_enabled()"
},
@@ -108,7 +108,7 @@ local settings = {
category = "Link Quality Settings",
key = "aredn.@lqm[0].auto_distance",
type = "string",
- desc = "Distance to use when actual distance cannot be calculated. 0 for auto",
+ desc = "Distance in meters to use when actual distance cannot be calculated",
default = "0",
condition = "lqm_enabled()"
},
@@ -116,7 +116,7 @@ local settings = {
category = "Link Quality Settings",
key = "aredn.@lqm[0].margin_quality",
type = "string",
- desc = "Quality increase before neighbor can be re-accepted",
+ desc = "Quality percentage increase before neighbor can be re-activated",
default = "1",
condition = "lqm_enabled()"
},
@@ -124,7 +124,7 @@ local settings = {
category = "Link Quality Settings",
key = "aredn.@lqm[0].ping_penalty",
type = "string",
- desc = "Quality penalty when neighbor cannot be pinged",
+ desc = "Quality percentage penalty to add when neighbor cannot be pinged",
default = "5",
condition = "lqm_enabled()"
},
@@ -175,7 +175,7 @@ local settings = {
category = "WAN Settings",
key = "aredn.wan.vlanid",
type = "string",
- desc = "Specify WAN VLAN #",
+ desc = "Specify WAN VLAN number; must be an integer in the range [1,4094]",
default = "",
condition = "supportsVLANChange()",
current = "currentWANVLAN()",
@@ -186,7 +186,7 @@ local settings = {
category = "Power Options",
key = "aredn.@poe[0].passthrough",
type = "boolean",
- desc = "Specifies whether a PoE passthrough port should be on or off. (Not all devices have PoE passthrough ports).",
+ desc = "Specifies whether PoE power passthrough should be on or off (Not all devices have PoE passthrough ports)",
default = "0",
condition = "hasPOE()",
postcallback = "setPOEOutput()"
@@ -195,7 +195,7 @@ local settings = {
category = "Power Options",
key = "aredn.@usb[0].passthrough",
type = "boolean",
- desc = "Specifies whether the USB port should be on or off. (Not all devices have USB powered ports).",
+ desc = "Specifies whether USB power passthrough should be on or off (Not all devices have USB powered ports)",
default = "1",
postcallback = "setUSBOutput()",
condition = "hasUSB()"
@@ -230,21 +230,21 @@ local settings = {
category = "Memory Settings",
key = "aredn.@meshstatus[0].lowmem",
type = "string",
- desc = "Specifies the low memory threshold (in KB) when we will truncate the mesh status page",
+ desc = "Specifies the low memory threshold in KB when the mesh status page will be truncated",
default = "10000"
},
{
category = "Memory Settings",
key = "aredn.@meshstatus[0].lowroutes",
type = "string",
- desc = "When low memory is detected, limit the number of routes shown on the mesh status page",
+ desc = "The maximum number of routes that will be shown on the mesh status page when low memory is detected",
default = "1000"
},
{
category = "Network Tools",
key = "aredn.olsr.restart",
type = "none",
- desc = "Will restart OLSR when saving setting -- wait up to 2 or 3 minutes to receive response.",
+ desc = "Will restart OLSR when executed; wait up to 2 or 3 minutes to receive response",
default = "0",
postcallback = "olsr_restart()"
},
@@ -280,14 +280,14 @@ local settings = {
category = "Firmware Paths",
key = "aredn.@downloads[0].firmwarepath",
type = "string",
- desc = "Specifies the URL of the location from which firmware files will be downloaded.",
+ desc = "Specifies the URL of the location from which firmware files will be downloaded",
default = "http://downloads.arednmesh.org/firmware"
},
{
category = "Firmware Paths",
key = "aredn.@downloads[0].pkgs_core",
type = "string",
- desc = "Specifies the URL for the 'core' packages: kernel modules and the like",
+ desc = "Specifies the URL for the 'core' packages such as kernel modules",
default = defaultPackageRepos('aredn_core'),
postcallback = "writePackageRepo('core')"
},
@@ -351,7 +351,7 @@ local settings = {
category = "AREDN Alert Settings",
key = "aredn.aam.refresh",
type = "none",
- desc = "Attempt to pull any AREDN Alert messages.",
+ desc = "Execute to pull any AREDN Alert messages",
default = "0",
postcallback = "aam_refresh()"
},
@@ -359,14 +359,14 @@ local settings = {
category = "AREDN Alert Settings",
key = "aredn.@alerts[0].localpath",
type = "string",
- desc = "Specifies the URL of the location from which local AREDN Alerts can be downloaded.",
+ desc = "Specifies the URL of the location from which local AREDN Alerts can be downloaded",
default = ""
},
{
category = "AREDN Alert Settings",
key = "aredn.@alerts[0].pollrate",
type = "string",
- desc = "Specifies how many hours to wait between polling for new AREDN Alerts.",
+ desc = "Specifies how many hours to wait between polling for new AREDN Alerts",
default = "12",
needreboot = true
},
@@ -374,7 +374,7 @@ local settings = {
category = "AREDN Alert Settings",
key = "aredn.aam.purge",
type = "none",
- desc = "Immediately purge/delete all AREDN (and local) Alerts from this node.",
+ desc = "Execute to immediately delete all AREDN (and local) Alerts from this node",
default = "",
postcallback = "alert_purge()"
}
diff --git a/files/www/cgi-bin/setup b/files/www/cgi-bin/setup
index 362106dd..3c3761ad 100755
--- a/files/www/cgi-bin/setup
+++ b/files/www/cgi-bin/setup
@@ -1117,7 +1117,7 @@ if wifi_enable == "1" then
]])
- html.print("
