Commit Graph

26 Commits

Author SHA1 Message Date
AbortRetryFail 9fd900f631
Add build target for Meraki MR16 devices. (#104)
closes #103
closes #104
2021-05-16 15:29:40 -07:00
Joe AE6XE fa12ec50e1
aredn: add Rocket XM ar71xx image to support older models with USB port (#83) 2021-03-24 22:25:34 -05:00
apcameron 80619b73a9
ath79: Migrate the TP-LINK WBS Devices to the ath79 Branch (#525) 2020-05-01 09:30:39 -05:00
apcameron 62adfa9eb8
ath79: Migrate CPE210 v1/v1.1, CPE510v1/v1.1 to the ATH79 Branch (#523)
Installation:

Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
2020-04-28 22:29:37 -05:00
apcameron 31c6669c2f ath79: add support for TP-Link CPE220 v2
Specifications:

    * SoC: Qualcomm Atheros AR9344 (560 MHz)
    * RAM: 64MB
    * Storage: 8 MB
    * Wireless: 2.4GHz N based built into SoC 2x2
    * Ethernet: 2x 100/10 Mbps, integrated into SoC, 24V POE IN

Installation:

Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
2020-04-20 19:20:57 -07:00
apcameron b452af4c05 bugfix: migrate the TP-LINK CPE610 v1 device to the ath79 branch 2020-04-10 17:54:51 -07:00
apcameron 3b4ac70028 bugfix: Migrate the TP-LINK CPE510 v2/v3 to the ath79 branch 2020-04-09 06:13:28 -07:00
Joe Ayers 9d5f8a3a78 aredn: upgrade to pre-openwrt-19.07.2 2020-02-26 00:04:23 -06:00
Joe Ayers ae593838bb aredn: upgrade to Openwrt 19.07.0 release
Co-authored-by: Andrew KK4ZUZ <apcameron@softhome.net>

This commit begins the process to migrate from ar71xx to
ath79 target images.
2020-01-29 07:39:05 -08:00
apcameron 5eedf421da ar71xx: add Support for the TP-LINK WBS510 V2
This adds support for a popular low-cost 5GHz N based AP

Specifications:
- SoC: Atheros AR9344
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
- Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
2019-11-23 09:17:05 -08:00
Joe Ayers d8f9320021 aredn: add GL-iNet AR750 definitions 2019-05-26 16:24:39 -07:00
Joe AE6XE 3ad13fd500 bugfix: add build config for ar300m (#420) 2019-05-18 09:49:36 -05:00
Joe Ayers e15021dc66 aredn: add support for GL-USB150 Microuter 2019-05-04 19:49:52 -07:00
ZL2WRW 1a43b07293 Add experimental support for the GL.iNet GL-AR150 (#407)
* Add experimental support for the GL.iNet GL-AR150 - https://openwrt.org/toh/gl.inet/gl-ar150
Mesh networking and tunneling have been confirmed working.
This device has been confirmed capable of operating on channel -1, but /etc/config/wireless has to be manually edited to select this channel.

* www/cgi-bin/perlfunc.pm patched to add UI support for the GL.iNet GL-AR150

* www/cgi-bin/perlfunc.pm patched to add UI support for the GL.iNet GL-AR150 - seems like only 18 dBm TX power is possible

* Remove Experimental comments and designate as stable

* Configure Ethernet ports & VLANs for GL-AR150, and update README.md

* Fix misunderstanding re README.md

* Patch Upstream OpenWRT GL-AR150 LAN & WAN LED mapping, configure WLAN LED as mesh linked indicator.
2019-04-30 20:55:09 -05:00
Patrick Dickey f833b38e04 Adding support for the TP-Link WBS210 version 1. 2019-02-12 07:20:44 -08:00
apcameron b9bf9ba099 ar71xx: Add Support for the TP-LINK CPE220 V2.0 Device (#306)
Installation:
     Flash factory image through stock firmware WEB UI
     or through TFTP
     To get to TFTP recovery just hold reset button while powering on for
     around 4-5 seconds and release.
     Rename factory image to recovery.bin
     Stock TFTP server IP:192.168.0.100
     Stock device TFTP adress:192.168.0.254
2018-12-11 17:09:11 -06:00
apcameron 230eddf8bb ar71xx: Add Support for the TP-LINK CPE510 V3.0 Device
Installation:
 Flash factory image through stock firmware WEB UI
 or through TFTP
 To get to TFTP recovery just hold reset button while powering on for
 around 4-5 seconds and release.
 Rename factory image to recovery.bin
 Stock TFTP server IP:192.168.0.100
 Stock device TFTP adress:192.168.0.254
2018-12-10 14:38:00 -08:00
apcameron 9d60516176 ar71xx: Add Support for the TP-LINK CPE220 V3.0 Device
Installation:
     Flash factory image through stock firmware WEB UI
     or through TFTP
     To get to TFTP recovery just hold reset button while powering on for
     around 4-5 seconds and release.
     Rename factory image to recovery.bin
     Stock TFTP server IP:192.168.0.100
     Stock device TFTP adress:192.168.0.254
2018-12-05 19:38:46 -08:00
apcameron 6982757c79 ar71xx: Add Support for the TP-LINK CPE610 V1.0 Device
Installation:
 Flash factory image through stock firmware WEB UI
 or through TFTP
 To get to TFTP recovery just hold reset button while powering on for
 around 4-5 seconds and release.
 Rename factory image to recovery.bin
 Stock TFTP server IP:192.168.0.100
 Stock device TFTP adress:192.168.0.254
2018-12-03 19:25:48 -08:00
Joe AE6XE 17c08a8ffa aredn: Add LiteBeam M5 definition (#261)
fixes #257
2018-11-07 20:27:57 -06:00
apcameron 700f020e25 ar71xx: add TP-LINK CPE210 V3.0 and CPE510 V2.0 profiles
Adds a separate profile and binary for both devices.
fixes #221
2018-11-05 22:28:03 -08:00
Joe AE6XE 32754bfea9 bugfix: use bullet-m image (#157)
* bugfix: aredn README correction of bullet-m image usage

* Revert "build: add missing ubiquiti loco-m image to the build output (#150)"

This reverts commit 3c8c048ccb.
no loco-m image, use bullet-m
2018-08-26 13:03:43 -05:00
dman776 3c8c048ccb
build: add missing ubiquiti loco-m image to the build output (#150) 2018-08-23 13:27:58 -05:00
apcameron 9fd3f30934 ar71xx: Add Support for the TP-LINK CPE210 V2.0 Device
Once Support for the TP-LINK CPE210 V2.0 gets added to the OpenWrt code we will need to drop the patch 001-add_support_for_TP-Link_CPE210_v2.patch
2018-05-15 21:20:44 -07:00
Joe AE6XE 8bc2921d88 build: upgrade to openwrt 18.01.x 2018-03-31 08:31:42 -07:00
Joe AE6XE 91ee8671b6 build: create top level make structure 2018-03-23 00:39:07 -07:00