Commit Graph

14 Commits

Author SHA1 Message Date
Joe AE6XE 123949de9e
aredn: Standardize Ethernet Port vlans for UBNT XM devices (#297)
The secondary port on Ubnt XM devices was non-functional.
Enabled bridge type in network config to utilize both ports.
2018-12-02 17:52:48 -08:00
Joe AE6XE a62fe95b26
aredn: hAP ac lite enable 5GHz LAN Access Point (#287)
* aredn: hAP ac lite enable 5GHz LAN Access Point

enable ability to bridge LAN physical ports with wireless
LAN Access Point capability. On dual band hAP ac lite,
used in parallel with mesh RF on 2GHz.  Enables future
features on single band devices to turn off mesh RF and
repurposed for mesh LAN Access Point.

closes: #215
2018-11-27 21:37:59 -08:00
Joe AE6XE 0bd057ed40 aredn: phase 1 support for Mikrotik rb952Ui-5ac2nD
Add support for the hAP lite model rb952UI-5ac2nD equivilent to
the UBNT AirRouter.  The 5Ghz interface will be configured in a
2nd phase.  This hAP lite model has double the RAM and Flash
of the AR.  the 2Ghz is MIMO (5Ghz is single antenna).
2018-09-03 23:26:56 -07:00
apcameron 0d95d4d708 ar71xx: Add Support for the TP-LINK CPE510 V2.0 Device
Once the PR for this is accepted by Openwrt we will need to remove the file
001-add_support_for_TP-Link_CPE510_v2.patch

Removed 001-add_support_for_TP-Link_CPE210_v2.patch as PR #937 has been committed

Updated 99_setup_aredn_include to remove unused Rssi Led configuration
2018-07-04 18:17:14 -07:00
apcameron 9fd3f30934 ar71xx: Add Support for the TP-LINK CPE210 V2.0 Device
Once Support for the TP-LINK CPE210 V2.0 gets added to the OpenWrt code we will need to drop the patch 001-add_support_for_TP-Link_CPE210_v2.patch
2018-05-15 21:20:44 -07:00
Andrew Cameron 770fe43e23 aredn: upgrade setup_aredn_include to new generate_led 2018-03-29 23:55:55 -07:00
Andrew Cameron 1fc7a926ab bugfix: fix scripts to current standards
local can only be used in a function
2018-03-29 22:00:19 -07:00
Conrad Lara - KG6JEI 8975c46c67 bugfix: TPLink and similar, fix port_map led mapping 2015-07-02 20:30:27 -07:00
Conrad Lara - KG6JEI 6b404c27ff bugfix: move set eth mac fixup to /etc/init.d/local
Not getting much debug information at moment, would like to put this in uci-defaults but with issues that I can't seem to log at moment (and not having serial cable for this device) I'm going with lets put it in /etc/init.d/local before nvram and similar gets set.

ref AREDN->ticket:115
2015-07-02 19:03:47 -07:00
Conrad Lara - KG6JEI 2482af260c bugfix: re-work the mac change code.
Old code would set mac on the sub-vlan not the master interface which could cause issues.

Rework to be more functional in the future and to work correctly on vlan interfaces.

ref AREDN->ticket:115
2015-07-01 23:03:01 -07:00
Conrad Lara - KG6JEI 794c00c7c6 bugfix: "wifi" network isn't yet defined during firstboot so hard code interface names to eth0 and wlan0
ref AREDN->ticket:115
2015-06-30 22:17:45 -07:00
Conrad Lara - KG6JEI 7985ff6ba3 bugfix: deal with duplicate MAC on LAN and WIFI
ref AREDN->ticket:115
2015-06-29 22:58:08 -07:00
Conrad Lara - KG6JEI 06a46e4d2a bugfix: Radio0Path is unknonw WIFI doesn't start.
wifi detect  is called in /etc/init.d/boot before uci_apply_defaults is called.

Because of this if we don't have the data about the radio0path we need to remove the wifi config file first before calling wifi detect.
2015-05-16 11:32:29 -07:00
Conrad Lara - KG6JEI e69f1e98ba bugfix: Move aredn_include setup to uci-defaults and fix radio0path upgrade flaw
Needs to be in uci-defaults to be sure these data sets execute BEFORE the OS boots

We also need to get radio0 path because its mandatory for wifi to work.

Needed for sysupgrade from 3.0.2 to latest version.
2015-05-15 22:54:16 -07:00