1a43b07293
Add experimental support for the GL.iNet GL-AR150 ( #407 )
...
* Add experimental support for the GL.iNet GL-AR150 - https://openwrt.org/toh/gl.inet/gl-ar150
Mesh networking and tunneling have been confirmed working.
This device has been confirmed capable of operating on channel -1, but /etc/config/wireless has to be manually edited to select this channel.
* www/cgi-bin/perlfunc.pm patched to add UI support for the GL.iNet GL-AR150
* www/cgi-bin/perlfunc.pm patched to add UI support for the GL.iNet GL-AR150 - seems like only 18 dBm TX power is possible
* Remove Experimental comments and designate as stable
* Configure Ethernet ports & VLANs for GL-AR150, and update README.md
* Fix misunderstanding re README.md
* Patch Upstream OpenWRT GL-AR150 LAN & WAN LED mapping, configure WLAN LED as mesh linked indicator.
2019-04-30 20:55:09 -05:00
c981a1c451
feature: api - added current dhcp leases ( #394 )
...
* feature: api - added current dhcp leases
* move dhcp info to secure page
* changed filename
2019-04-30 20:29:17 -05:00
0300874d99
New sysinfo json changes ( #405 )
...
* sysinfo.json additions
lua library additions
Dependent on #389 and #391
Replaces #387
* additional check for nil needed
tested on a node with several very marginal RF links (IP, no host name) and it is working, so far.
also removed the decimal point on the n/lq values, we didn't need 10 places of accuracy. :)
* a couple more small changes
* changed neighborLinkInfo() function in aredn.info to show *all* links, not just RF.
Adds additional info for each RF link (tx/rx_rate, noise, signal)
* Removed redundant function.
Removed functions no longer needed.
Reworked getCurrentNeighbor function to add in the additional RF link info if requested.
2019-04-29 22:43:37 -05:00
94816c45c7
Minor UI/output updates ( #399 )
...
* UI update
* Perl better
* Reset .gitignore
2019-04-16 21:10:30 -05:00
9393525076
Fixed the consistency between "archive" and "realtime" SNR data ( #403 )
...
* cleaned up the endpoint for snr data
* updated property names on the signal page
2019-04-16 21:08:45 -05:00
1df9caa750
Add gitignore
2019-04-14 08:15:33 -05:00
9665a8aeee
bugfix: ubnt lbe-m5 does not identify boardid
...
fixes #398
2019-04-13 21:45:37 -05:00
c1920104d3
aredn: Set default channel and width
...
10MHz channel width is most commonly used. This default
will minimize how many new users are unable to connect
to a local mesh on first try. In 2GHz use ch -2
as only clear part 97 10MHz channel available and
predominently used.
2019-04-02 20:06:39 -07:00
9470c6b1ad
aredn: add definition for Mikrotik LHG 5HPnD
2019-04-02 17:57:04 -07:00
e0ea513c5e
feature: added localhosts info to api ( #390 )
...
* mesh endpoint can return localhosts
* mesh endpoint can return localhosts
* added localhosts info to api
2019-03-27 22:21:23 -05:00
5016da26c7
bugfix: add luasocket feed to make luasocket package available ( #391 )
2019-03-26 22:49:33 -05:00
1c81085986
feature: add OLSR current neighbor info to API ( #389 )
...
* feature: add OLSR current neighbor info to API
* bugfix: correct quote issue
2019-03-26 01:04:33 -05:00
2ed5d37258
feature: added chart endpoint to the /api ( #386 )
...
* wscan can output results as json
* added a page for displaying scan results as json
* updated file permissions with +x
* added endpoint for wifi scan
* Revert "updated file permissions with +x"
This reverts commit 6f0a038334fbacc3f585f0a86fb7d9986a47b7d2.
* Revert "added a page for displaying scan results as json"
This reverts commit 4806ad01b6b717e2e02f248309a0257bb390af23.
* Revert "wscan can output results as json"
This reverts commit 75454e7e790a0457a0846182b0a8a44205772368.
* removed hardcoded device name
* exposed freqlist through the api
* moved signal.json code into the api
* old signal page uses /api?page=chart
* removed signal.json
* chart has targets for realtime and archive
* updated old signal page to use new api
2019-03-25 18:34:51 -05:00
58d4d21729
feature: added a wifi scan endpoint to the /api ( #379 )
...
* wscan can output results as json
* added a page for displaying scan results as json
* updated file permissions with +x
* added endpoint for wifi scan
* Revert "updated file permissions with +x"
This reverts commit 6f0a038334fbacc3f585f0a86fb7d9986a47b7d2.
* Revert "added a page for displaying scan results as json"
This reverts commit 4806ad01b6b717e2e02f248309a0257bb390af23.
* Revert "wscan can output results as json"
This reverts commit 75454e7e790a0457a0846182b0a8a44205772368.
* removed hardcoded device name
* exposed freqlist through the api
2019-03-25 16:56:38 -05:00
77a74d9016
aredn: reset branch to develop
2019-03-23 20:46:33 -07:00
7983e082b9
aredn: Prepare 3.19.3.0 release ( #384 )
2019-03-22 13:44:41 -05:00
a399623140
Revert "aredn: enable ath9k auto distance capability ( #367 )"
...
This reverts commit d5be7814b3
2019-03-21 21:30:48 -07:00
1495c11498
feature: update list of supported devices in prep for 3.19.3.0 release ( #382 )
2019-03-21 17:44:59 -05:00
bfdee216ba
readme: updated with hAP AC Lite port info ( #381 )
...
* readme: updated with hAP AC Lite port info
* updated language to clarify and include AirRouters
2019-03-21 16:44:14 -05:00
e9166722fd
aredn: add definition for Rocket M5 TI GPS
...
board.sysid=0xe1d5
board.cpurevision=0x00002122
board.name=Rocket M5 Titanium
board.shortname=R5T
board.subtype=GPS
board.netmodes=7
board.hwaddr=DC9FDB2E1715
board.reboot=40
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
board.gps=1
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe1d5
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.min=-4
radio.1.txpower.offset=5
radio.1.ieee_modes=5
radio.1.antennas=13
radio.1.def_antenna=13
radio.1.antenna.1.id=1
radio.1.antenna.1.name=AMO-5G10
radio.1.antenna.1.gain=10
radio.1.antenna.1.builtin=0
radio.1.antenna.1.chains=2
radio.1.antenna.1.chain.1.id=0
radio.1.antenna.1.chain.1.name=Chain0
radio.1.antenna.1.chain.2.id=1
radio.1.antenna.1.chain.2.name=Chain1
radio.1.antenna.2.id=2
radio.1.antenna.2.name=AMO-5G13
radio.1.antenna.2.gain=13
radio.1.antenna.2.builtin=0
radio.1.antenna.2.chains=2
radio.1.antenna.2.chain.1.id=0
radio.1.antenna.2.chain.1.name=Chain0
radio.1.antenna.2.chain.2.id=1
radio.1.antenna.2.chain.2.name=Chain1
radio.1.antenna.3.id=3
radio.1.antenna.3.name=AM-5G16-120
radio.1.antenna.3.gain=16
radio.1.antenna.3.builtin=0
radio.1.antenna.3.chains=2
radio.1.antenna.3.chain.1.id=0
radio.1.antenna.3.chain.1.name=Chain0
radio.1.antenna.3.chain.2.id=1
radio.1.antenna.3.chain.2.name=Chain1
radio.1.antenna.4.id=4
radio.1.antenna.4.name=AM-5G17-90
radio.1.antenna.4.gain=17
radio.1.antenna.4.builtin=0
radio.1.antenna.4.chains=2
radio.1.antenna.4.chain.1.id=0
radio.1.antenna.4.chain.1.name=Chain0
radio.1.antenna.4.chain.2.id=1
radio.1.antenna.4.chain.2.name=Chain1
radio.1.antenna.5.id=5
radio.1.antenna.5.name=AM-M-V5G-Ti
radio.1.antenna.5.gain=17
radio.1.antenna.5.builtin=0
radio.1.antenna.5.chains=2
radio.1.antenna.5.chain.1.id=0
radio.1.antenna.5.chain.1.name=Chain0
radio.1.antenna.5.chain.2.id=1
radio.1.antenna.5.chain.2.name=Chain1
radio.1.antenna.6.id=6
radio.1.antenna.6.name=AM-5G19-120
radio.1.antenna.6.gain=19
radio.1.antenna.6.builtin=0
radio.1.antenna.6.chains=2
radio.1.antenna.6.chain.1.id=0
radio.1.antenna.6.chain.1.name=Chain0
radio.1.antenna.6.chain.2.id=1
radio.1.antenna.6.chain.2.name=Chain1
radio.1.antenna.7.id=7
radio.1.antenna.7.name=AM-5G20-90
radio.1.antenna.7.gain=20
radio.1.antenna.7.builtin=0
radio.1.antenna.7.chains=2
radio.1.antenna.7.chain.1.id=0
radio.1.antenna.7.chain.1.name=Chain0
radio.1.antenna.7.chain.2.id=1
radio.1.antenna.7.chain.2.name=Chain1
radio.1.antenna.8.id=8
radio.1.antenna.8.name=AM-V5G-Ti
radio.1.antenna.8.gain=21
radio.1.antenna.8.builtin=0
radio.1.antenna.8.chains=2
radio.1.antenna.8.chain.1.id=0
radio.1.antenna.8.chain.1.name=Chain0
radio.1.antenna.8.chain.2.id=1
radio.1.antenna.8.chain.2.name=Chain1
radio.1.antenna.9.id=9
radio.1.antenna.9.name=AM-5AC21-60
radio.1.antenna.9.gain=21
radio.1.antenna.9.builtin=0
radio.1.antenna.9.chains=2
radio.1.antenna.9.chain.1.id=0
radio.1.antenna.9.chain.1.name=Chain0
radio.1.antenna.9.chain.2.id=1
radio.1.antenna.9.chain.2.name=Chain1
radio.1.antenna.10.id=10
radio.1.antenna.10.name=AM-5AC22-45
radio.1.antenna.10.gain=22
radio.1.antenna.10.builtin=0
radio.1.antenna.10.chains=2
radio.1.antenna.10.chain.1.id=0
radio.1.antenna.10.chain.1.name=Chain0
radio.1.antenna.10.chain.2.id=1
radio.1.antenna.10.chain.2.name=Chain1
radio.1.antenna.11.id=11
radio.1.antenna.11.name=RD-5G-30
radio.1.antenna.11.gain=30
radio.1.antenna.11.builtin=0
radio.1.antenna.11.chains=2
radio.1.antenna.11.chain.1.id=0
radio.1.antenna.11.chain.1.name=Chain0
radio.1.antenna.11.chain.2.id=1
radio.1.antenna.11.chain.2.name=Chain1
radio.1.antenna.12.id=12
radio.1.antenna.12.name=RD-5G31-AC
radio.1.antenna.12.gain=31
radio.1.antenna.12.builtin=0
radio.1.antenna.12.chains=2
radio.1.antenna.12.chain.1.id=0
radio.1.antenna.12.chain.1.name=Chain0
radio.1.antenna.12.chain.2.id=1
radio.1.antenna.12.chain.2.name=Chain1
radio.1.antenna.13.id=13
radio.1.antenna.13.name=RD-5G-34
radio.1.antenna.13.gain=34
radio.1.antenna.13.builtin=0
radio.1.antenna.13.chains=2
radio.1.antenna.13.chain.1.id=0
radio.1.antenna.13.chain.1.name=Chain0
radio.1.antenna.13.chain.2.id=1
radio.1.antenna.13.chain.2.name=Chain1
radio.1.distance_limit_km=0
radio.1.chanbw="5,8,10,20,30,40"
feature.rssi.leds=6
feature.gps=1
feature.gps.leds=7
feature.ext_reset=0
2019-03-20 21:26:24 -07:00
f82e90330a
Add Arch build instructions to README ( #377 )
2019-03-18 10:47:20 -05:00
f6e5832fe2
bugfix: delay start up of snmpd until later in the boot process.
...
On some devices snmpd would start before it's configuration file was created.
Changed /etc/rc.d/S50snmpd to /etc/rc.d/S98snmpd
2019-03-01 19:55:48 -08:00
0d223232b5
bugfix: standardize browser page title on the node status page to be consistent with other pages ( #372 )
...
fixes #366
2019-02-25 21:08:44 -06:00
60d01c91da
bugfix: correct spelling error ( #370 )
...
fixes #368
2019-02-25 08:20:22 -06:00
d5be7814b3
aredn: enable ath9k auto distance capability ( #367 )
2019-02-24 16:03:24 -06:00
f833b38e04
Adding support for the TP-Link WBS210 version 1.
2019-02-12 07:20:44 -08:00
711fe96a70
aredn: add definition for nanobridge M2 13
...
fixes #358
2019-02-07 20:52:27 -08:00
bb818a9539
build: upgrade to OpenWrt 18.06.2 and refresh patches
2019-02-06 20:31:10 -08:00
4eda661962
feature: add volume control to signal tone ( #353 )
2019-02-02 21:49:49 -06:00
3abc82f529
feature: add pitch control to signal tone ( #347 )
2019-01-31 16:57:30 -06:00
ddda727da0
bugfix: correct issue when pushing sound "on" more than once ( #345 )
2019-01-29 18:53:22 -06:00
89c9d37075
bugfix: new settings will now show after a conditional setting ( #343 )
2019-01-29 12:20:37 -06:00
d9acfa2ea7
feature: add sounds to realtime signal page ( #342 )
2019-01-28 23:39:51 -06:00
07aa305e29
aredn: olsrd: add olsrd watchdog
...
Adding native olsrd watchdog on top of procd
ensures mesh nodes are always accessable.
closes #338
2019-01-27 14:12:37 -08:00
90b21d88d2
aredn: add definition for hAP ac lite current revision
...
/proc/cpuinfo machine string to identify the device
has changed.
From - MikroTik RouterBOARD 952Ui-5ac2nD
To - MIkroTik RouterBOARD RB952Ui-5ac2nD
2019-01-27 12:19:11 -08:00
ef24633204
bugfix: aredn: fix bogus nano-m-xw image upload warning
...
fixes #330
2019-01-23 23:17:02 -08:00
b5ceb1ccc2
bugfix: set execute bit on api script ( #329 )
2019-01-22 17:14:35 -06:00
aff681b198
Update Contributors ( #328 )
...
Add Ray to contributors file
2019-01-21 16:13:10 -06:00
664f2ee629
Some LUA Code Clean Up, API ( #327 )
...
* Refactor API
* work in progress
* lua clean up
2019-01-21 15:41:31 -06:00
13a6afb815
aredn: Add definitions for Rocket M2 XW
2019-01-10 17:10:46 -08:00
dbfef25ec0
build: set feeds to aredn_packages develop branch
2019-01-09 16:42:43 -08:00
22fe3bdc66
bugfix: olsrd: clean up startup warnings
2018-12-31 15:18:58 -08:00
6728fba06b
bugfix: aredn sysinfo.json fails with mesh rf off
...
added json meshrf->status->on/off
fixes: #317
2018-12-22 10:14:58 -08:00
27f4356a46
Merge pull request #316 from ae6xe/update3
...
bugfix: bogus warning when selecting firmware file to sysupgrade
2018-12-20 05:22:17 -08:00
0fed66dbf5
bugfix: bogus warning when selecting firmware file to sysupgrade
...
fixes : #290
2018-12-19 20:30:23 -08:00
031fa60e09
aredn: README update for NanoStation XM Ethernet use
2018-12-18 20:42:15 -08:00
8778b07bc6
bugfix: helpfile spelling correction
...
fixes : #311
2018-12-18 20:41:49 -08:00
588b59cf65
aredn: Add definitions for Mikrotik RB-911G-5HPnD
2018-12-18 20:40:58 -08:00
cf463159aa
Merge pull request #312 from ae6xe/hapfix
...
aredn: hap ac lite add 2G/5G lan ap options
2018-12-17 21:59:52 -08:00
1c6d2286cc
aredn: hap ac lite add 2G/5G lan ap options
...
Add option for hap ac lite to select which band to
use for LAN AP option, 2GHz or 5GHz. Also, ensure
all wireless cards are defined when disabled to
prevent default wireless config options.
2018-12-17 20:13:37 -08:00
ZL2WRW