For some reason, there was code in the driver to block the setting of
the coverage when a previous setting wasn't a particular value.
It's unclear what this was trying to achieve or prevent, but it stopped AC
devices operating efficiently (by a factor of 10x or more).
There's a bug where 2.4GHz channels will associate incorrectly with other 2.4 channels
even though they are on different frequencies. The problem appears to be triggered during
scans when scan probes are sent and received on many different frequencies, but are then
reported as as they arrive as if they come from the selected frequency of the device, causing
incorrect stations to be created. This can only occur for IBSS (adhoc) mode, when the
IBSS frequency is fixed, and when the SSID is also fixed. We do all this for AREDN.
Fortunately these probe contains (but *only* on 2.4 GHz) the actual frequency of the sending
device, so we can avoid incorrectly creating stations which are not really a match.
This situation does not seem to happen on 5GHz channels.
e Please enter the commit message for your changes. Lines starting
* Update to Openwrt 21.02 and add support for the CPE710 v1
Update scripts to change references to ifname to device due to a change in Openwrt naming
reverse-wpad-basic-wolfssl and disable SSL on Curl
NOTE: The compile host must have python3-distutils installed for gpsd to build
* aredn: initial working upgrade to openwrt 21.02.1
* aredn: update 1 to working upgrade to openwrt 21.02.1
* aredn: add cpe710v1 to build config
* Andrew's patches
* Remove duplicates + display perl
* Temp disable wifi extension patch
* ifname/ports support
* Add spectrum patch back in
* Generic function to extra interfaces
* New api to get wifi ifname
* Disables jails
* Style link
* aredn: partial upgrade to openwrt 22.0.3.0
added AC device images and partial migration to 22.0.3.0
firewall upgrade pending
* aredn: update mesh-release and revert config.mk
* Unused
* NFT firewall rewrite
* Common-isze configs
* Fix network layout for hap2
* Use local packages dev (new firewall rules)
* Add HAP2
* Add pause after network restart to let bridge reinitialize
* Various lua fixes for new lua version
* Tweak config
* Re-fix networking (lost patch change)
* Add new radio names
* Tolerate missing wifi
* Fix hap-lite switch setup
* More devices
* New radio id
* Build Rocket 5AC lite
* Remove need for luci.sys
* Remove need for luci.sys
* Explicitly name wlan interfaces
* Handle different compatibility verisoning
* Update networking for switches
* ipref version bump
* Extra flag for curl
* Better compat_version fix
* Remove wolfssl
* Fix dns server
* Fix device name
* Unused
* Remove things we dont need
* Remove unused packages
* Generic macaddr overrides
* Fix uci commit
* Fix luci.template.parser to avoid luci.http loading the real thing
* Rocket-M build
* Add search-domain dhcp option
* Turn of ipv6
* No IPV6 in dnsmasq
* Override mac addresses if devices all the same
* Working from master (for now)
* Put back hostap
* Disable old ethmac fixup
* Tweak configs
* Move back to v22.03.2
Leave ipq4019 builds to master
* Need IPV6 to compile nft firewall
* Rocket-M fixes
* Before we start
* WIP
* Working snapshot
* Cleaned patches
* Merged patch
* Single patch to support HAP2
* Fix typo
* Add nanostation-m
* 5/10Mhz patch
* 5+10MHz patch for ath10k-ct driver
* Extend 2Ghz channel check to include -4 to -1
* Add chanbw setup for ath10k (like ath9k)
* Added TP-Link CPE710 v1
* Override firmwares
* Missing patch
* Dropbear config like 3.22.8.0
* Add Ubiquiti Rocket 5AC Lite
* Fix c6
* Update
* Need more scan channels
* Remove IPV6
* Improve mac fixups
* Put back missing nft app
* IPv6 removed so dont have to disable it
* Fix rocket-m flash bug
* Fix nanostation-m
* Nanobridge is tiny
* Fix wifi order for ar750
* Rocket M5 XW support
* New rates
* Fix firewall4 so we don't need IPv6
* Allow channel width to be restricted
* Move channel list into library
* Fix naming
* Mechanism to block specific channels on specific radios
* Refresh buttons
* routerboard-sxt-5nd
* CPE605 v1.0
* Improve rocket m xw
* tpink
* Update patch
* Update to remove disable
* Remove BW restrictions on cpe710
* Restrict to what has been tested
* Remove test BW restrictions
* sxtsq-5-ac
* Update
* Update
* powerbeam-m5-300 support
* Fix
* Fix hap2
* Tidy unused patches
* Remove limit
* Add ubnt_bullet-m-ar7241
* Added ubnt_nanobeam-ac-gen2
* Fix typo
* Tolerate missing dtd ip
* Explicitly gix hap2 mac addresses
* Fix some broken patches
* Hap2 wont work at 5MHz
* Ubiquiti LiteBeam 5AC Gen2
* Fix compat_version for sxt 5ac
* Update patch
* Unused
* Fix lan configuration for some devices
* Rolling average of noise level
* Unused
* Split out the ath10k rssi monitor (its very simple at the moment)
* Ignore .DS_Store
* Reboot if ethernet doesnt come up (but only once!)
* reboot returns - add exit
* Add some logging info
* Fix ]
* Check all possibly ethernet bridges
* Improve mac fixing
* Remove HostAP on small memory devices
* Reduce dropbear footprint
* Add setsid
* Kill hostap when upgrading to save memory
* Different way to detect hostapd unavailable
* New build steps
* Improve manager logging
* Fix name conflict for the two monitors
* Try to improve test mesh name resolve problem
* Migrate tiny to generic (tiny doesnt work properly)
* Typo
* Another attempt to fix macs for Mikrotik
* Protect against missing trackers
* Fix wpad for ipq40xx
* Remove old tunnel check code
* Enable ZRAM swap to aid low memory devices
* ath10k noise can something be out of range - protect against that
* Updated with current devices and status
* Update firmware which has been tested
* Updated with more builds
* More binary/README
* Fix css error
* Start noise at sensible base level
* Unfix the css so it looks how it use to.
* Save as much memory as we can on lowmem nodes
* Hide some options on low memory devices
* Add "eol" to 32MB devices
* Restart network rather than reboot node if it seems to be broken
* Fixes
* Revert network reset
* Fix ar750 networking
* Continue to trim tiny configs
* More devices
* Dump IW output messages
* Fix Rocket 5AC intermittent ethernet issue
* Ethernet fix for PowerBeam 5AC 500
* More tiny size reduction
* More support data
* Fixed POE and USB power features
* Add Ubiquiti NanoBeam AC (gen1)
* NanoStation (not NanoBeam)
* Add mii-tool package
* Device updates
* Bump update time to 5 minutes
* Fix ethernet negotiation for rocker-5ac and nanobeam
* Fix iplookup
* Config changes based on call feedback
* Radio listing fixes
* Update with more untested builds
* Fallback TxMbps extracted from iw station dump
* Fix tunnel detection for low memory nodes
* Remove unused feed packages
* snapshot build
* Update stability info
* Add powerbeam-5ac-500
* Typo
* Add missing 3.22.1.0
* Add MikroTik LHG 5 AC
* Fix permissions
* Fix permissions
* AirGrid's take Bullet builds
* Mikrotik AC3
* Improve supportdata structure a little to make it easier to find things
* Restore WAN VLAN overrides
* Fix vlan regex for hap2 and hap3
* Support old and new style poe controls
* hap-ac3 is version 1.1
* Handle typo in some openwrt config files
* Fix HAP AC3 install
* Update hap ac3 status
* Support user overrides for network ports (non-swconfig devices)
* LHG 5AC support
* Remove -nand
* Remove non-working platform.sh change
* tunnel weight override
* Omit LinkQualityMult when value is 1
* Add mANTBox 19s and 15s
* Support ath79 mikrotik devices which require ath10k in the initramfs
Co-authored-by: apcameron <apcameron@softhome.net>
Co-authored-by: Joe AE6XE <ae6xe@arrl.net>
Co-authored-by: Joe Ayers <joe@arrl.net>
* Improve the firmware upgrade process
The old firmware upgrade process attempted to free up RAM by reusing
the 'upgrade_kill_prep' script which is later used by '/sbin/sysupgrade'.
Unfortuantely this doesn't work as intented. While the script will go about
killing various services, 'procd' just goes and starts them up again using
quite a bit more memory in the process. Instead this script just kills
the various daemons 'no questions asked' and then runs the associated
'/etc/init.d/xxx stop' script to instruct 'procd' not the start them up again.
This gets us to the place the original script was trying to go.
+ A syntax fix in '007' patch (need spaces around the [ .. ])
* Inline the style for the firmware page to avoid sleep before flash
* Minor reliability improvements
* Clear away services even earlier
The iperf3 package installs a firewall rule, but the script to restart
the firewall on install had a typo meaning it wasn't called (so the
new firewall setup required a reboot)
Tim Wilkinson