35b8278b34
bugfix: traffic generated from the tun client would not forward thru the server
2016-02-23 13:20:19 -06:00
aa3f8855c1
fixes AREDN->ticket:151
2016-02-23 10:00:51 -06:00
64f1c941f2
Merge branch 'mesh_mbps' into release-3.16.1.0
2016-02-11 21:18:49 -08:00
0f1c33196b
Bugfix: TxMbps help.html updates to match (rate * ewma) calulation
2016-02-11 21:17:23 -08:00
1419f28749
Merge branch 'mesh_mbps' into release-3.16.1.0
2016-02-10 23:32:42 -08:00
225fabd063
Bugfix: Calculation of TxMbps now (MCS rate * %-packet-success)
...
ThroughPut numbers in rate selection table were not based on
expected definition from Minstrel's docs. Rather, was based
on 1200 byte packets and transmit time included SIFS time
inflating #s.
2016-02-10 23:23:25 -08:00
5b7475f607
Feature: Add 0xe4a2 boardid support for AirRouter (non-HP)
...
XM.v5.5.11# cat /etc/board.info
board.sysid=0xe4a2
board.cpurevision=0x00000101
board.name=AirRouter
board.shortname=LAP
board.subtype=
board.netmodes=15
board.hwaddr=687251405E66
board.reboot=30
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe4a2
radio.1.subvendorid=0x0777
radio.1.txpower.max=20
radio.1.txpower.offset=1
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=0
2016-02-10 20:13:59 -08:00
001496e7dc
bugfix: re-worked wifi distance setting to show all values (miles, KM, meters)
2016-02-04 17:55:57 -06:00
7df4747aff
bugfix: Traffic from Lan to DTDLINK not masqueraded when in NAT mode.
...
Due to a firewall chain name changes in BB when a node was in NAT mode (instead of recommended direct mode) connections that went out over DTDLink as the first hop would not be masqed and as such would not work.
2016-01-23 20:40:01 -08:00
765ca369ea
bugfix: Disable Default Route checkbox was not displayed in NAT mode
2016-01-22 21:10:28 -08:00
602dc13d8a
add loading spinner to signal page
2016-01-22 15:32:33 -07:00
b38309bab5
Merge branch 'FixupTunnelFirewall' into release-3.16.1.0
...
Various fixes around tunnel firewall rules
2016-01-21 20:40:43 -08:00
29ba1c0419
bugfix: Tunnel Firewall: Accept SNMP and default to block on input chain instead of accept
2016-01-21 20:39:59 -08:00
a7ae3afe4e
Merge branch 'AirRouterLEDS' into release-3.16.1.0
...
Add support for the Globe LED to be the mesh status on AirRouter
ref AREDN->ticket:144
2016-01-21 20:21:48 -08:00
923039fcc0
Merge branch 'release-3.16.1.0' of ssh://git.aredn.org/aredn_ar71xx into release-3.16.1.0
2016-01-20 10:10:34 -07:00
35e05b7dac
change uhttpd script_timeout from 60 to 240 to fix uploading firmware on slow links
2016-01-20 10:09:52 -07:00
bc04cd9a5a
updated help file with "optionalsettings" information (lat/lon, upload, ntp, etc.)
2016-01-20 01:25:27 -06:00
04c8de37a2
feature: enabled new chart zoom options
2016-01-19 19:58:00 -06:00
c0973f68a9
feature: enabled option to save chart as a JPG or PNG
2016-01-19 19:39:31 -06:00
5fa47d6f93
bugfix: ar71xx: airrouter: Use "Globe" LED to indicate mesh connection
2016-01-17 20:09:11 -08:00
0f837d601a
bugfix: Tunnel firewall rules throw a chain does not exist on firewall restart.
...
This chain may not exist by design of the check.
Redirect the iptables error to /dev/null so it doesn't clog logs
2016-01-16 21:20:22 -08:00
5663741cb1
bugfix: On firewall reload some tunnel rules were not being inserted into the default chains which are flushed on both reload and restart of firewall by OpenWRT fw scripts.
2016-01-16 21:20:22 -08:00
2be20cbde2
bugfix: Tunnel firewall rule chain names are incorrect.
...
Based on previously reverted commit 646702aab9
2016-01-16 21:20:16 -08:00
06eb7fa688
bugfix: Remove erroneous reference in license header of 01-tunnels script.
...
Script is a new file created after the split from BBHN and did not use code from a file BBHN worked on.
2016-01-16 19:58:38 -08:00
921967d5f9
Revert "bugfix: resolve bad chain ref and port from hotplug to a firewall include"
...
This reverts commit 646702aab9
2016-01-16 19:55:20 -08:00
6d619b6757
Merge: bugfix: snrlog fix for out-of-range noise floor values returned by iw
2016-01-16 17:23:28 -08:00
f02d4abd33
bugfix: snrlog fix for out-of-range noise floor values returned by iw
2016-01-16 17:21:55 -08:00
646702aab9
bugfix: resolve bad chain ref and port from hotplug to a firewall include
2016-01-16 13:26:14 -08:00
b870bbce6c
CanvasJS upgraded to 1.8 GA
2016-01-15 17:19:06 -06:00
243ded9f23
Bump banner to 3.16.1.0 in prep for release
2016-01-13 09:45:36 -08:00
c34ce710dc
bugfix: always show buttons, added javascript error handling when not internet connected
2016-01-12 20:30:00 -06:00
507dbab626
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into develop
2016-01-12 11:21:12 -07:00
0aca4ce5c7
fix bug with spaces in time zone names
2016-01-12 10:58:06 -07:00
16b06c4554
rearranged the order of buttons in the optional location section
2016-01-12 11:33:25 -06:00
38d2c1fc8b
feature: find me using browser location services
2016-01-11 17:41:35 -06:00
7314a868e5
feature: added button to post data to aredn server including olsrd topology info
2016-01-11 12:46:12 -06:00
de2ba6ec59
feature: Add definition for NS Loco M5 0xe0a5
2016-01-10 18:49:58 -08:00
31032615a7
merge: bugfix: rssi_monitor increase tolerance on test one notch
2016-01-09 21:02:55 -08:00
97d48c2b84
bugfix: rssi_monitor increase tolerance on test one notch
2016-01-09 21:00:09 -08:00
c21b4f7b35
bugfix: removed Strongest Selection from Archive chart
2016-01-09 20:55:53 -08:00
bb10ca7faf
Merge branch 'FirewallIncludes' into develop
2016-01-09 19:48:18 -08:00
813c4cefcf
feature: Decrease WIFI Beacon rate in Mesh mode to around 2 times a second.
...
This changes the beacon rate from once every 100tu's to once every 500tu's
1tu=1024 microseconds
This will decrease the amount of RF time being used by beacon packets.
This is especially important on 900MHz and 2.4GHz using 5MHz wide channels where 10 nodes beaconing 10x a second at ~256kbit/s can use up around 45% of the RF channel in beacons alone.
Other bands and channels and widths are not expected to see as significant an advantage due to the faster data rates.
2016-01-09 17:39:44 -08:00
e8b2ffd7ea
feature: FirewallIncludes: Migrate tunnel firewal rules to new include format.
...
These rules setup chains that may be needed by other firewall rules as such we need to set them up early to be sure includes work.
2016-01-09 16:24:54 -08:00
477a20d55a
feature: FirewallIncludes: Add program that will auto include firewall rules that are in a set directory.
...
This is the basis for allowing packages to contain firewall rules that can be just dropped in a folder at install time.
2016-01-09 16:24:45 -08:00
5c87a894c9
license: Add license header to vtun_up file
2016-01-09 15:10:58 -08:00
6f3cb97ea2
fix new lines
2016-01-08 21:09:38 -07:00
ad8e3c0605
revert validate_hostname change
2016-01-08 18:05:31 -07:00
44ab46bc87
move new settings to optional area under table, disable ntp server, ntp server fqdn validation
2016-01-08 18:04:25 -07:00
c6d02d964a
change timezone to time_zone
2016-01-08 11:50:45 -07:00
7653acc333
Merge branch 'develop' into ntp
2016-01-08 11:11:13 -07:00
6f97c52565
add time zone and ntp server to setup page
2016-01-08 10:58:22 -07:00
f62a6d43fa
re-inserted antenna message
2016-01-06 14:47:52 -06:00
cb1bd15823
resized distance field, changed is_online technique
2016-01-06 14:36:40 -06:00
c9b2670d99
removed unnecessary comment
2016-01-06 14:25:09 -06:00
779f33e8fc
removed lat/lon/grid from admin page (moved to setup)
2016-01-06 10:46:59 -06:00
d55f6de4cf
bugfix: removed global css border change
2016-01-06 10:46:27 -06:00
4f2d68bc08
feature: added lat/lon/gridsquare fields and map to capture them
2016-01-06 10:23:18 -06:00
07f447313f
default wifi distance to 0, disallow saving with 0 value, change alert to show on 0
2016-01-05 23:09:34 -06:00
1e24cda1f1
change chart back to spline type
2016-01-05 22:12:24 -06:00
2b2ec5c1fd
removed erroneous reference to Broadband-Hamnet from copyright
2016-01-05 22:11:44 -06:00
4372605f8f
merge: jsoninfo into develop
2016-01-05 11:02:37 -07:00
3359c44ca7
feature: add jsoninfo to olsr and open firewall ports 9090
2016-01-05 11:00:22 -07:00
16b4e8c798
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into develop
...
* 'develop' of ssh://git.aredn.org/aredn_ar71xx:
feature: TxMbps--Added Mesh Status Help Section and minor code enhancements
bugfix: snrlog better handle neighbor references from mac to ip to hostname
hardware: Add testing support for AirRouter HP
2016-01-04 22:42:34 -06:00
a1bc4fa35b
feature: distance value calculation in km or miles
2016-01-04 22:41:27 -06:00
0cf75af9df
feature: TxMbps--Added Mesh Status Help Section and minor code enhancements
2016-01-01 16:08:02 -08:00
38209b0af2
bugfix: snrlog better handle neighbor references from mac to ip to hostname
2015-12-30 17:57:49 -08:00
cc6d4ee550
hardware: Add testing support for AirRouter HP
...
board.info
{{{
board.sysid=0xe4b2
board.cpurevision=0x00000101
board.name=AirRouter
board.shortname=LAP
board.subtype=HP
board.netmodes=15
board.hwaddr=687251449BBD
board.reboot=50
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe4b2
radio.1.subvendorid=0x0777
radio.1.txpower.max=28
radio.1.txpower.min=-4
radio.1.txpower.offset=9
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=6
}}}
2015-12-28 22:48:13 -08:00
2dfc911df7
Merge branch 'release-3.15.1.0' into develop
...
Conflicts:
files/www/cgi-bin/mesh
2015-12-22 08:45:09 -08:00
91ad5613fe
feature: Add TxMbps to mesh status
2015-12-21 18:26:45 -08:00
9c21a18f3f
bugfix: IP selection dropdown list is empty on dhcp reseveration/ports page.
2015-12-20 18:52:10 -08:00
d6db48fb48
bugfix: Services were not lined up correctly on mesh status page.
...
Correct services to be correctly lined up.
Note:
It looks like we need to split the two tables eventually on the mesh status page as the services are pushed to the right.
Saving this however to be done in a future release as we may be doing a revamp of this page for sortable fields in the near future and this would fit in with that.
2015-12-16 21:42:43 -08:00
9d0b7d59e1
Revert "bugfix: Services were not lined up correctly on mesh status page."
...
This reverts commit b223259f4f
2015-12-16 21:41:19 -08:00
b223259f4f
bugfix: Services were not lined up correctly on mesh status page.
...
Correct services to be correctly lined up.
Note:
It looks like we need to split the two tables eventually on the mesh status page as the services are pushed to the right.
Saving this however to be done in a future release as we may be doing a revamp of this page for sortable fields in the near future and this would fit in with that.
2015-12-16 21:33:16 -08:00
265d2eb196
feature: enhance snrlog to squareLine, local TZ, fix test condition
2015-12-15 22:45:29 -08:00
fb224eebc0
Merge: bugfix: resolved rssi shift condition that needed a noise floor calibration
2015-12-14 21:47:24 -08:00
d33726e893
bugfix: resolved rssi shift condition that needed a noise floor calibration
2015-12-14 21:44:08 -08:00
ad856844bf
feature: enhance snrlog to handle neigbors dropping in and out and leaving mesh
2015-12-14 20:55:07 -08:00
b2c4913680
default any error conditions to -95
2015-12-13 15:07:46 -06:00
aa6dbe41d6
minor adjustment to interfaces and hosts (change to array)
2015-12-12 17:33:54 -06:00
839718cc89
minor adjustment to interfaces and hosts (change to array)
2015-12-12 17:19:52 -06:00
f6c134fe7c
feature: AREDN banner
2015-12-11 15:38:45 -08:00
3685deb091
moved buttons to top of page for consistency with other pages
2015-12-11 17:10:57 -06:00
8586a9fee8
feature: device support for older AirGrid M5 0xe245 tested in beta
2015-12-11 10:50:45 -08:00
6903476f02
feature: snrlog updates to handle host name change and lack of hostname or ip info
2015-12-11 10:25:38 -08:00
4aff5d7a59
fixed typos in device names
2015-12-11 11:15:48 -06:00
62ba6daf75
bugfix: display correct month
2015-12-11 01:04:34 -06:00
2f15569a69
fixed y-axis label
2015-12-11 00:35:37 -06:00
096f798ceb
hardware: Update supported hardware list labels.
2015-12-10 10:53:37 -08:00
fbc6002924
removed spurious comments
2015-12-10 12:15:12 -06:00
61d9db044d
bugfix: location message alignment/html structure issue
2015-12-10 12:14:38 -06:00
fba3459752
bugfix: fix validation to not allow - at the end of the line
2015-12-10 12:12:15 -06:00
1ef42568c2
changed default chart view to realtime
2015-12-10 11:22:30 -06:00
43565d714e
updated snrlog for multi devices
2015-12-10 11:17:03 -06:00
f96fac0a57
removed old SNR page and replace with new chart page
2015-12-10 11:14:43 -06:00
833dedd8fa
changed the filename that snrlog cron job creates
2015-12-09 17:20:16 -06:00
a1deaea04a
bugfix: initialize chart to start at -95 instead of 0
2015-12-09 17:16:44 -06:00
4de822ca2b
signal2 cleanup
2015-12-09 16:57:57 -06:00
dd04d3d657
feature: added realtime charts by device
2015-12-09 16:37:37 -06:00
c81127f2a4
feature: select a device to view archived data against, enabled chart zooming/panning
2015-12-09 15:36:09 -06:00
8c3c436cb7
bugfix: rssi_monitor fails if node goes deaf in first 12 min after startup, trigger on abnormal increases.
2015-12-08 22:06:55 -08:00
46c13c8c64
bugfix: add error checking when posting to map server
2015-12-08 17:20:53 -06:00
c270ea5e0d
added data validation for lat/lon/gridsquare
2015-12-08 17:03:15 -06:00
8ceaa87472
bugfix: maxis on grid square field set to 6
2015-12-07 15:51:29 -06:00
fa0e128104
feature: provided lat/lon/gridsquare purge ability
2015-12-07 15:47:12 -06:00
e1d4c82256
bugfix: test/update grid square to message appears when appropriate
2015-12-07 15:41:34 -06:00
24ccfb30bc
feature: save location data from admin page
2015-12-07 15:24:39 -06:00
4d12a6f535
feature: include boardid for Rocket M5 XW
2015-11-25 21:54:36 -08:00
0c776ab932
fix: correct max power setting NS loco XW
2015-11-25 21:23:52 -08:00
dc5df00d46
feature: Add boardid for NS Loco M5 XW
2015-11-25 20:43:27 -08:00
e3962e12e1
feature: add signal2 graphing page to status page as a button
2015-11-24 22:39:27 -06:00
46b49369d4
bugfix: firstboot now requires user interaction or -y flag to approve an overwrite.
2015-11-23 20:08:07 -08:00
a489928fc6
bugfix: sortable wscan was removed during previous merge.
...
During a previous merge the sortable code for wscan was accidentally removed.
2015-11-23 19:58:37 -08:00
c5a1f21d77
bugfix: dnsmasq not updating hostnames ( dnsmasq pid file has moved )
2015-11-23 19:17:38 -08:00
51f4bcc550
bugfix: ssh keys not saving across sysupgrade
2015-11-16 14:44:52 -06:00
dabd9a4fbc
bugfix: 802.11n devices did not use 802.11n datarates
...
This adds support for 802.11n data rates on the mesh.
This should improve dataspeeds across the board
MIMO devices like Rocket and NanoStation should be able to use dual chains which allows diverse data transmission on each chain increasing throughput
MCS data rates in theory should cut through noise better than legacy modulation and have higher speeds on each step which should allow overall higher datarate between nodes.
2015-11-15 19:50:54 -08:00
48cb37bd05
Merge branch 'release-3.15.1.0' into develop
...
Merging in latest release-3.15.1.0 changes into develop to provide a foundation with recent release fixes for the develop branch.
This should be 3.15.1.0b03 code.
Conflicts:
files/etc/crontabs/root
files/usr/local/bin/wscan
files/www/cgi-bin/sysinfo.json
2015-11-15 19:28:56 -08:00
854a536629
bugfix: Settings set to 0(off/disabled) are not copied over during OTA.
...
Some settings would not copy correctly and would fall back to the config default due to faulty if checks logic when the value was set to 0 ending up in if(0) checks.
2015-11-15 10:59:17 -08:00
5b945229fa
bugfix: add rssi_monitor data and logfiles to download support data
2015-11-03 20:32:36 -08:00
79bf05f7d9
bugfix: rssi_monitor log file size trim calculation error
2015-11-02 22:15:22 -08:00
8cd8e07885
bugfix: deaf chain workaround
2015-11-01 18:33:05 -08:00
a5492c0807
bugfix: tunnel client not showing errors. allow - in pwd
2015-10-19 22:48:09 -05:00
a200f49a37
bugfix: Better handle AP detection.
...
All devices that respond to an iw scan will be AP's or ADHOCS.
All adhoc devices need to have the adhoc designator so if we don't see this we know its an AP.
2015-09-04 22:19:53 -07:00
c7bde9712a
bugfix: station listing includes nodes that have not been seen for some time
...
Also resolves the "0" signal strength as nodes that have not been seen in long time show up as a 0 for signal.
This is a regression of the issues seen on the iw scan but in this case applies to station dump which we have not used before.
2015-09-04 22:11:00 -07:00
ba3f3b9b16
bugfix: initialize lastseen variable before first use.
2015-09-04 21:38:44 -07:00
0f8b82e074
bugfix: regression: Networks not seen in long time show up in scan
...
commit d0bbeae66b9aec7e019b
2015-09-04 20:48:17 -07:00
d0bbeae66b
bugfix: wscan - show 3ghz freq instead of channels, fix blank mode fields
2015-08-28 19:44:54 -07:00
0669217984
check for 3Ghz band channels and report freq instead
2015-08-28 20:09:33 -05:00
14d7163666
add wifi channel number
2015-08-18 21:39:30 -05:00
b9ce490a3c
changed maxlines to capture 2days worth of data
2015-08-10 18:25:55 -05:00
3cd84b3dfc
bugfix: wrong syntax for iw
2015-08-05 13:40:45 -05:00
28f038edd5
bugfix: Correct section reference 10(e) should be 7(e) when referring to the section that grants the additional terms permission in GPL.
2015-08-03 15:57:42 -07:00
e0c2cbbe5d
feature: add sorttable.js lib to www/js dir
2015-07-30 15:34:13 -05:00
5358f43604
minor fixes
2015-07-30 15:33:22 -05:00
478caec8f7
feature: make service links open in a new window
2015-07-30 12:33:18 -05:00
cfd7aa2a6c
js lib changes
2015-07-28 16:33:20 -05:00
028f140996
added js libs
2015-07-28 16:31:48 -05:00
9b2e95238c
fixed realtime charts
2015-07-28 16:16:01 -05:00
af97ce3f49
bugfix: "Disable default route" not kept during OTA upgrade.
2015-07-28 08:49:48 -07:00
3ae86c67ec
feature: signal charts
2015-07-26 23:09:34 -05:00
ae2bc531b2
hardware: board add: Rocket M5 with USB Port
...
board.info
{{{
board.sysid=0xe105
board.cpurevision=0x000000c2
board.name=Rocket M5
board.shortname=R5N
board.subtype=
board.netmodes=7
board.hwaddr=00156DDC9D53
board.reboot=30
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=1524
board.phy.2.maxmtu=1524
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe105
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.offset=5
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=0
}}}
2015-07-23 21:24:21 -07:00
2511f585f0
bugfix: Should not keep /etc/config/* on sysupgrade
...
We don't really need any files in there, and keeping the folder can interfere with the programs that populate /etc/aredn_include on firstboot from uci-default.
This will cause the node to boot up in default mode (with an AP on its interface on the default channels) during its first boot, and than very quickly reboot and come up under the mesh.
2015-07-23 11:35:54 -07:00
2755094c9f
Merge branch 'FixupTPLinkPower' into release-3.15.1.0
...
Deals with the fact that TPLink has max powers that differ based on frequency and are programed into the chip lower than what the manufacture states in its datasheet.
We want to make sure we don't fry any boards so we honor what the chip programming is set to.
2015-07-22 23:20:23 -07:00
5f66df447f
add help text and icon for power setting info
2015-07-22 23:16:24 -07:00
f209886f76
add qmark image
...
Part of Freesns Cumulus package
https://www.iconfinder.com/icons/183285/help_mark_question_icon#size=16
Free for commerical use
Created by Yannick Lung, 2013
Web: www.yanlu.de
Twitter: @FreecnsUI or @YanluDE
Facebook: www.facebook.com/FreecnsUI
Mail: freecns@yanlu.de
Google+: Freecns
App.net: Freecns
Version 2.0 known as Freecns Cumulus
LICENSE
You are free to use Freecns for commercial and personal purposes without attribution, however a credit for the work would be appreciated. You may not sell or redistribute the icons themselves as icons. Do not claim creative credit.
2015-07-22 23:00:58 -07:00
912afe3713
added channel bandwidth
2015-07-21 12:19:41 -05:00
108e05088b
bugfix: Add max power level tracking control for per channel power on devices
...
Mainly relates to TP-Link devices which have a roving power level programmed into the hardware.
The datasheets for the hardware may say higher power but the chip has been programmed to not go above these values.
2015-07-20 23:30:49 -07:00
9b30e157bc
bugfix: Set max power for device to TPLink programed "max power"
...
This is the absolute maximum that can be used by the device from TPLink eprom programming.
The value actually goes down on some frequencies.
2015-07-20 21:38:01 -07:00
9aec7e019b
bugfix: regression: Networks that have not been seen in long time still show up in wifi scan.
...
Regression of changeset:e34b7fcee49c3e2b7eb35aa4fb44b6abdc78b3ad/aredn_ar71xx
Having moved to iw for iwinfo we have a regression previous commit.
Restore fix that if not seen after 10 seconds signal drops from display.
2015-07-19 23:34:06 -07:00
661dc23e18
bugfix: wscan does not show channels sometimes.
...
We should of used the freq: field, not sure why I did not use it to begin with.
Corrected and added a small function to convert from frequency to channel.
2015-07-19 23:22:45 -07:00
2613a8507c
bugfix: wscan bogus hostname lookup when multiple entries in arp table
2015-07-19 18:53:50 -07:00
cb09c22275
feature: changed version element name, added grid square
2015-07-16 19:21:41 -07:00
2a63226ad3
feature: added board_id to output
2015-07-16 19:21:41 -07:00
0cd0db2d0d
feature: add sysinfo.json for programmatic lightweight management interface
2015-07-16 19:21:41 -07:00
683b07c4a3
Merge branch 'wscan' into release-3.15.1.0
2015-07-15 21:12:20 -07:00
0efbd5b2f5
bugfix: wifi scan documentation update for changes made
2015-07-15 21:10:51 -07:00
c68a4d23bb
Merge branch 'release-3.15.1.0' of git.aredn.org:aredn_ar71xx into release-3.15.1.0
2015-07-15 19:37:09 -07:00
9294e790eb
bugfix: AREDN->ticket:132 show AREDN networks on other channels fixed
2015-07-15 19:27:06 -07:00
3c86ff9ec8
feature: changed version element name, added grid square
2015-07-13 20:32:17 -05:00
e8333f76ea
feature: added board_id to output
2015-07-13 11:18:53 -05:00
3c0f3ad144
bugfix: tunnel install not posting to same page
2015-07-12 23:26:09 -05:00
8e1da4766a
feature: add sysinfo.json for programmatic lightweight management interface
2015-07-10 21:51:18 -05:00
cc74123ad3
bugfix: vtund was missing from arednsysupgrad.conf
2015-07-10 18:56:30 -07:00
311b9d5ffe
bugfix: Nodes are showing up as encrypted when they are not.
...
The code makes the assumption that the connection has not been modified to be encrypted (Standard is not under AREDN V3 protocol) but this may need to be changed in the future.
2015-07-10 18:50:28 -07:00
3576a2c00b
Merge branch 'RemoveIWINFOCalls' into release-3.15.1.0
...
Move from iwinfo to iw where possible
Discovered while discussing another issue about ssid's
ref AREDN->ticket:132
2015-07-09 21:05:14 -07:00
0fdeb4e7eb
bugfix: extend support tool to capture more info from iw as we now use it more than iwinfo
2015-07-09 21:03:06 -07:00
51272c37df
bugfix: migrate wscan from iwinfo to iw due to new rf channels and iwinfo issues
2015-07-09 20:58:32 -07:00
650d1bca28
bugfix: nodeupgraded needs to be set before taring up the archive
...
ref AREDN->ticket:131
2015-07-09 20:01:32 -07:00
87f655f103
Merge branch 'FixSYSUPGRADEBackups' into release-3.15.1.0
...
ref AREDN->ticket:131
2015-07-09 18:21:35 -07:00
442b7e9822
bugfix:
...
Make sure httpd.conf is up to date on first boot.
2015-07-09 16:10:50 -07:00
d7be9104d9
bugfix: We need to only pull a small selection of files over through sysupgrade instead of all config files.
...
opkg config can cause issues on OS upgrade among others.
ref AREDN->ticket:131
2015-07-09 09:25:00 -07:00
3872261893
Revert "bugfix: define tun hostname for olsrd"
...
This reverts commit d4f6aea68e
2015-07-07 21:31:24 -05:00
0359796a33
bugfix: detect tun passwords with only numbers
2015-07-06 23:32:41 -05:00
f96dd0d49d
Merge branch 'release-3.15.1.0' into develop
...
Early merge of 3.15.1.0 into develop due to a large number of code changes in the release branch.
Will merge again in the future when the branch is closed but want to pull in changes now from release.
2015-07-06 11:19:17 -07:00
8eabf6ad00
bugfix: snr setting was setting SignalLevel instead of NoiseLevel
...
ref AREDN->ticket:129
2015-07-02 22:43:01 -07:00
8975c46c67
bugfix: TPLink and similar, fix port_map led mapping
2015-07-02 20:30:27 -07:00
6b404c27ff
bugfix: move set eth mac fixup to /etc/init.d/local
...
Not getting much debug information at moment, would like to put this in uci-defaults but with issues that I can't seem to log at moment (and not having serial cable for this device) I'm going with lets put it in /etc/init.d/local before nvram and similar gets set.
ref AREDN->ticket:115
2015-07-02 19:03:47 -07:00
c4c808f98c
Merge branch 'FixupRefDMZLed' into release-3.15.1.0
...
Remove references to DMZ led and replace with "Status 4" led
2015-07-01 23:25:56 -07:00
55ec5d6dc1
bugfix: change ref to DMZ Led to Status 4 led in help.html
2015-07-01 23:25:22 -07:00
8e0943f8e0
bugfix: Pull dtdlink and tunnel from remote connections display.
...
Due to issues we are pulling the showing of tunnels untill we can better detect them.
We are also pulling dtdlink as all AREDN nodes should have dtdlink enabled.
2015-07-01 23:21:51 -07:00
305dbb143e
bugfix: ".local.mesh" being added to already qualified domain names.
...
fixes AREDN->ticket:127
2015-07-01 23:10:13 -07:00
2482af260c
bugfix: re-work the mac change code.
...
Old code would set mac on the sub-vlan not the master interface which could cause issues.
Rework to be more functional in the future and to work correctly on vlan interfaces.
ref AREDN->ticket:115
2015-07-01 23:03:01 -07:00
a46bbf27d8
bugfix: sometimes iw doesn't show noise floor
...
Pull from kernel debug instead for now untill we can work around it in iw.
fixes AREDN->ticket:129
2015-07-01 10:05:58 -07:00
794c00c7c6
bugfix: "wifi" network isn't yet defined during firstboot so hard code interface names to eth0 and wlan0
...
ref AREDN->ticket:115
2015-06-30 22:17:45 -07:00
13db1b02a2
bugfix: Remove ref to DMZ Led on first node reboot
2015-06-30 08:36:45 -07:00
39729157c6
bugfix: Signal levels do not show up on "new extended" RF Channels
...
Switch to iw over iwinfo because it handles the new channels better.
Partially reverts changeset:808a8d5019fce4a7ca2c027ea7838d43c6d8cad0/aredn_ar71xx
fixes AREDN->ticket:129
2015-06-30 00:05:45 -07:00
4816a47751
Merge branch 'FixupDuplicateMAC' into release-3.15.1.0
...
ref AREDN🎫 115
2015-06-29 23:00:43 -07:00
7985ff6ba3
bugfix: deal with duplicate MAC on LAN and WIFI
...
ref AREDN->ticket:115
2015-06-29 22:58:08 -07:00
d4f6aea68e
bugfix: define tun hostname for olsrd
2015-06-29 20:07:01 -05:00
9481c21db6
bugfix: fixes AREDN->ticket:128 remote neighbor incorrectly shown as having tunnel
2015-06-21 22:06:40 -07:00
f915225459
bugfix: Add in-testing support for older NanoStation M5 XW boards
...
board.info provided by VE3KMV
{{{
board.sysid=0xe005
board.cpurevision=0x000000c2
board.name=NanoStation M5
board.shortname=N5N
board.subtype=
board.netmodes=7
board.hwaddr=00272232336C
board.reboot=30
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=1524
board.phy.2.maxmtu=1524
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe005
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.offset=5
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=16
}}}
2015-06-21 19:24:43 -07:00
ff43a707c1
cleanup: Make note about automatic antenna selection look better on screen
2015-06-18 21:15:05 -07:00
547069986c
bugfix: Antenna selection handle by kernel: Cleanup errors reported by build tests.
2015-06-18 21:09:10 -07:00
21edf5fa02
bugfix:Let kernel handle antenna selection: Remove antenna name mapping data.
2015-06-18 20:18:03 -07:00
ea9dfc5d1a
bugfix: Let kernel handle antennas:Remove sub functions wifi_validant and wifi_defaultant
2015-06-18 20:15:47 -07:00
ee90c366aa
bugfix: The 'hack' we have been using to set RF chain has been discontinued.
...
Trying to registry over-write the antenna setting has never been a good idea in the first place.
The hardware fully handles antenna selection without forcing it already.
ref AREDN->ticket:120
2015-06-18 18:57:04 -07:00
d1253c0d9d
bugfix: Channel "0" means "Problem" inside the kernel.
...
To overhaul the system to allow "0" would take a significant re-write of kernel code. At this time its best to pull channel '0' as it is not in any clear RF space (channel 1 overlaps it)
ref AREDN->ticket:114
2015-06-18 18:35:41 -07:00
8da9756817
bugfix: removed debugging statements
2015-06-17 22:43:20 -05:00
3d7893fd46
Revert "Revert "fixes AREDN->125""
...
This reverts commit d917b5b2ec
2015-06-17 00:40:34 -05:00
d917b5b2ec
Revert "fixes AREDN->125"
...
This reverts commit 7a05f76c93
2015-06-17 00:39:07 -05:00
7a05f76c93
fixes AREDN->125
2015-06-17 00:38:13 -05:00
8619bd379e
bugfix: force node name to upper in config files for tunnel client
2015-06-16 23:13:58 -05:00
177f831e14
bugfix: tunnel firewall rules update for Barrier Breaker chain rename
2015-06-15 22:10:21 -07:00
02c756a489
Merge branch 'MeshBugfix' into release-3.15.1.0
...
Fixes AREDN->118:Mesh Status links incoorect
2015-06-14 23:09:42 -07:00
4ce0e1e21d
Fixes AREDN->118:Mesh Status links incoorect
2015-06-14 23:06:32 -07:00
807f381a04
bugfix: network and firewall tunnel rules reworked
2015-06-14 23:30:06 -05:00
5dc1d0fa02
Revert "bugfix: missing include in firewall config"
...
This reverts commit 05839715f6
2015-06-14 22:28:47 -05:00
cc2415faf0
bigfix: active icon not appearing on server
2015-06-14 20:50:54 -05:00
05839715f6
bugfix: missing include in firewall config
2015-06-11 01:21:30 -05:00
91762973a5
bugfix: tunnel firewall changes
2015-06-11 01:02:55 -05:00
049e8ce364
Merge branch 'release-3.15.1.0' of ssh://git.aredn.org/aredn_ar71xx into release-3.15.1.0
2015-06-11 00:40:40 -05:00
81ac8b7fbe
bugfix: losing network interfaces after node-setup
2015-06-11 00:40:14 -05:00
3429462627
fixes AREDN->ticket:112 wifi scan improperly sorted by signal strength
2015-06-09 21:51:52 -07:00
0472e30333
feature: sortable columns in wifi scan
2015-06-09 23:39:10 -05:00
a2456e4df9
bugfix: made firmware upgrade "keep settings" checked by default
2015-06-02 14:49:49 -05:00
1f2737f0f3
bugfix: tunnels: Unable to route to connections across tunnel
...
Firewall rules don't get called because vtund is at /usr/sbin/vtund not /usr/bin/vtund
Also make the check if line posix compatible while we are chaning the path to be sure it works in the future too.
2015-05-25 23:04:34 -07:00
f1df364997
bugfix: mesh stat: previous neig remove mid notation, show double same neigh {rf,dtd}
2015-05-25 10:46:15 -07:00
2e5c239ed5
bugfix: mesh stat added ref to wan gateways, was ommitted alongside dtd & tun.
2015-05-25 09:25:38 -07:00
b314c4539f
bugfix: correctly show primary wifi hostname for all references, etx sort, denote dtd & tun* iface
2015-05-24 22:43:26 -07:00
f610c58b82
BUGFIX: tunnel firewall to behave same as dtdlink part 2
2015-05-24 15:57:44 -07:00
15f8792001
BUGFIX: tunnel firewall to work same as dtdlink
2015-05-24 15:55:27 -07:00
e25756ffbe
setup: mesh gateway: Better define as an advanced feature.
...
Better define the Mesh Gateway as an advanced feature.
Increase documentation in help about what the feature does.
ref AREDN->ticket:109
2015-05-24 15:37:56 -07:00
af1eaa1107
Merge branch 'CleanupTunnels' into release-3.15.1.0
...
various fixups to improve the quality of bringing tunnel's into mainline code
2015-05-24 15:18:54 -07:00
1f4fa46887
supporttool: Add nodename and tsamp to default filename
...
add nodename and tstamp to default filename to reduce chance of submitting wrong file
timestamp may not always be 'real' time if a node does not have ntp access
2015-05-24 14:17:31 -07:00
23b634e6ac
bugfix: supportool: Sensitive files are being included in the support dump.
...
Add feature to remove files that are sensitive (such as vtun configuration with passwords)
2015-05-24 13:47:16 -07:00
c788d2daff
supporttool: Obtain better diagnostic information
...
Add dmesg
fix olsrd collection to obtain actual information
2015-05-24 13:29:49 -07:00
c7c615a750
bugfix: Missing AREDN Logo and alert banner on tunnel pages
2015-05-24 13:08:19 -07:00
3850cbac53
tunnels: Tunnels should only start when in mesh mode
...
Tunnels are not supported in other modes as such we should only let them start in mesh mode.
2015-05-24 12:59:11 -07:00
5cc53dec88
tunnels: Set tunnel init.d scripts to be executable
...
Remove the chmod step inside of setup.
Came across one time where this didn't trigger.
In addition this saves us from using additional storage space on the node as a +x creates a duplicate file.
2015-05-24 12:30:23 -07:00
0aaa6b6204
bugfix: tunnels: Tunnel config is deleted by saving changes on node.
...
Make sure we always save a copy of the tunnel config to /etc/config.mesh/ not just when we have an error.
2015-05-24 12:26:25 -07:00
fbb98d0539
bugfix: firewall rules not being written by node-setup
...
When calling uci commit the file gets overwritten and as such the additional file lines are discarded because the active /etc/config/firewall is diffrent than the open file.
Use the uci commit further down in node setup.
2015-05-24 11:36:15 -07:00
d15668d592
documentation: setup: Deprecation notice for all but mesh mode
...
All node type's except mesh have been deprecated.
In a future release we will remove them (and the associated code) to streamline the project.
It is recommended to use a dedicated purpose driven device for these modes in the future
2015-05-21 11:11:59 -07:00
1b68255c7f
hardware: NanoStation M3: Set NanoStation M3 to "in testing"
...
25dbm max power, with 3dbm offchip amplifier.
ref AREDN->ticket:53
2015-05-21 10:51:58 -07:00
0cf4c912ad
bugfix: setup: wired router: Country invalid error
...
Resolve country invalid error when using wired router mode.
Also resolves a chanbw missing error later as well.
ref AREDN->ticket:108
2015-05-21 10:44:25 -07:00
06a46e4d2a
bugfix: Radio0Path is unknonw WIFI doesn't start.
...
wifi detect is called in /etc/init.d/boot before uci_apply_defaults is called.
Because of this if we don't have the data about the radio0path we need to remove the wifi config file first before calling wifi detect.
2015-05-16 11:32:29 -07:00
e69f1e98ba
bugfix: Move aredn_include setup to uci-defaults and fix radio0path upgrade flaw
...
Needs to be in uci-defaults to be sure these data sets execute BEFORE the OS boots
We also need to get radio0 path because its mandatory for wifi to work.
Needed for sysupgrade from 3.0.2 to latest version.
2015-05-15 22:54:16 -07:00
42ee986cd3
bugfix: Untill user visit status page theme is not set.
...
Move default theme selection to html_header() to solve theme not being set.
2015-05-14 11:36:51 -07:00
d59709d840
bugfix: Theme reverts to no-theme when status page reset button is pressed.
...
A symlink loop occurs because the default theme selector links back to itself.
Removing the value= on the select title entry prevents this.
2015-05-14 10:56:41 -07:00
dff687eed7
Merge branch 'DefaultChannel' into develop
...
Allows nodes to default to a common channel that is in the most common bandplan space for Part 97 usage.
Local cordination is still needed by users to make sure the channel matches the local deployment.
Defaults are as follows:
Band : Channel Freq : Bandwidth
900 : 912MHz : 5MHz
2400 : 1 2412MHz : 20MHz
3400 : 3420MHz : 5MHz
5800 : 149 5745MHz : 5MHz
2.4GHz keeps channel 1 at 20MHz because it is the standard deployment.
All other bands are still 'new' and no standard exist so we are creating one.
5MHz chosen because it better fits the emcomm goal. Smaller width should be stronger allowing for better networks.
Local networks can change as they see fit.
2015-05-13 22:02:08 -07:00
8761ffc3b8
feature: default rf channel : Remove setting RF channel on first boot.
...
Remove setting RF channel on first boot in uci-defaults.
This should allow the node to use standard wifi channels when it boots allowing mesh setup to be run from a laptop or mobile device.
We will later move them to a real mesh channel during the mesh setup page.
Should also resolv issue where nodes were booting up on channel -2 and similar and wifi would refuse to start due to regdomain.
2015-05-13 21:50:32 -07:00
c11eae61e8
feature: default rf channel : Make setup page use mesh defaults on reset or unconfigured
...
When a node is first setup (unconfigured) the rf channel or when user presses reset button the wifi channel and bandwidth will be set to mesh default even if it does not match the current RF channel.
2015-05-13 21:47:15 -07:00
99bd244753
feature: default rf channel: Create new function to return default channel+bw
2015-05-13 20:19:22 -07:00
1ffa2b69a4
bugfix: tunnel: hot plug monitoring wrong interface name to trigger fw scripts
2015-05-12 19:24:06 -05:00
f33a60819e
bugfix: Status Screen: No word wrap on status screen initial warning text
...
A {{{</nobr>}}} was removed in changeset:9444716fbd923731e453456410b5d54b7be04370/aredn_ar71xx
2015-05-11 21:29:28 -07:00
dcb4994cda
bugfix: tunnels: Tunnels fail to start after saving.
...
etc/init.d/vtund needs to be +x
2015-05-10 14:39:03 -07:00
ea9638e787
bugfix: tunnels: Missing AREDN footer on pages.
...
Add call to page_footer(); to pages
2015-05-10 14:38:03 -07:00
994c4948d1
bugfix: get_boardid : echo should be a cat
2015-05-09 23:04:54 -07:00
eb20b40eb8
Merge branch 'tunnel_mainline' into develop
2015-05-09 22:04:18 -05:00
370808578b
cleanup: unused vars
2015-05-08 23:26:54 -05:00
27bf54f2dc
Merge branch 'SupportTool' into develop
...
Add new feature for support information to admin interface
Conflicts:
files/etc/httpd.conf
2015-05-08 20:03:22 -07:00
01fa7b5666
feature: supporttool: Add link to admin page
...
Add link to admin page for users to download support data
2015-05-08 20:02:09 -07:00
8299862b57
feature: support tool: Restrict Access
...
Restrict access to support tool to logged in admin user
2015-05-08 19:55:09 -07:00
b3798fecdd
feature: New tool to provide support providers with information about a node
...
support tool will dump a tar file with copy of key files and command outputs to aid in diagnostics of support questions.
2015-05-08 19:52:49 -07:00
18339b7443
Merge branch 'SpectrumTest' into develop
...
Spectrum testing proved to work out well. Merge code into mainline so we can better test with the rest of the hardware.
Also extends ability for 3.4 GHz devices (3.38=3.50)
Adds 5MHz spacing options for 5.8Ghz and allows more channels
Adds -2,-1,0 channel support on 2.4GHz
Conflicts:
files/www/cgi-bin/channelmaps.pm
2015-05-08 16:09:44 -07:00
f9eb33339c
feature: Extend RF channel list to match arednbase.
...
Additional channels have been added to the image, adding them to the GUI as well.
2015-05-08 15:23:02 -07:00
76ffed042f
Merge branch 'tunnel_mainline' into develop
2015-05-07 22:55:58 -05:00
f19d8e33fd
cleanup based on shellcheck tests
2015-05-07 22:55:15 -05:00
18ec1ff82c
Merge branch 'tunnel_mainline' into develop
2015-05-07 22:41:59 -05:00
5afde21c9f
bugfix: secured vpn and vpnc pages
2015-05-07 22:41:06 -05:00
c26b5fd992
Merge branch 'tunnel_mainline' into develop
2015-05-07 19:25:14 -05:00
f9f046f111
dynamic integration of tun interfaces with olsrd
2015-05-06 23:46:25 -05:00
5a246f7441
reworked ucifunc.pm
...
added server DNS name field
reworked to use section names in ici
2015-05-06 22:01:28 -05:00
bd3de68231
ar71xx: hardware: NanoBeam-M5-19 Add testing support
...
Add NanoBeam M5 19 in testing support
2015-05-05 16:29:53 -07:00
2af1e3e0c3
ar71xx: Copy get_model to get_boardid and modify to return a boardid
...
When model exiss that has a boardid in EEPROM it will return from there, otherwise it returns the model as chosen by ar71xx
2015-05-05 16:18:24 -07:00
3465b45732
feature: mesh status: Display NLQ
...
Add the NLQ to the remote neighbors display so users can see both directions of the path from the mesh status screen.
ETX is dependent upon both directions of the path.
2015-05-04 09:39:52 -07:00
ece70e2f63
BUGFIX: Mesh Status missing some advertised service links or names
2015-04-29 23:29:25 -07:00
a1ce01044d
feature: Add Disable Default Route checkbox to Lan box
...
Allows users to disable publishing 0.0.0.0/0 (all/internet) route via DHCP.
2015-04-29 23:18:09 -07:00
0be1ee22dc
Update node help to include details about "Disable Default Route" checkbox
2015-04-29 23:11:23 -07:00
cc1f683121
feature: adding support to add tun interfaces dynamically to olsrd
2015-04-29 23:02:29 -07:00
8aa7b84712
bugfix: correct unmatched quote error
2015-04-29 21:33:36 -07:00
defd944fc1
changed graphics: https://www.iconfinder.com/icons/183208/bin_can_garbage_trash_icon#size=20 (Free for commercial use)
2015-04-28 22:37:33 -07:00
5d6ba0c244
fix client options and disconnect graphic
2015-04-26 23:21:42 -05:00
7327c2de51
Merge branch 'develop' into tunnel_mainline
2015-04-23 23:00:00 -05:00
9840db43de
hardware: Add CPE210 in testing support
2015-04-22 11:31:23 -07:00
14ddd34906
Merge branch 'RocketM3' into develop
...
RocketM3 will remain in untested status until we get spectrum report.
ref AREDN->ticket:53
2015-04-22 00:06:43 -07:00
a43ef2827b
feature: improved stop methods for client and server. added IPs to uci config
2015-04-20 23:53:57 -05:00
344992b096
Merge commit '714a3d6f5404bcd650019bd59e92d2cc2bb54164' into develop
2015-04-17 18:50:53 -05:00
dec3eeeb47
Merge commit '88037845309b311901a590ca2a2b91adbd79bfc0' into tunnel_mainline
2015-04-15 21:09:32 -05:00
7371373235
feature: client and server fixes. calculate IP's for dest/gateway
2015-04-15 17:39:45 -05:00
94a803d456
feature: Add initial read-only SNMP support in mesh mode.
...
Config file is present upon initial start and in mesh mode.
Daemon still starts up in other modes but will not function w/o settings.
Firewall:
Permit access for UDP:161 (SNMPD) on WIFI and DTDLINK
Lan is permitted by default allow rules.
2015-04-14 22:31:21 -07:00
2917bb0f4b
Prep work for switching to procd olsrd-config will be called for both IPv4 and IPv6 executions.
...
Since we are not writing for IPv6 yet we exit early in the process.
2015-04-12 20:27:55 -07:00
e80f67f139
bugfix: email link did not contain password value
2015-04-11 22:37:26 -05:00
45e82607f9
bugfix: correcting 0 offset issue when getting list of clients, added copyright notice
2015-04-11 22:33:13 -05:00
7695dcdc4c
Merge branch 'develop' into tunnel_mainline
2015-04-10 17:42:21 -05:00
c1f293a6f9
Merge branch 'develop' of git.aredn.org:aredn_ar71xx into develop
2015-04-09 20:44:05 -07:00
56749d19ff
Merge branch 'wscan' into develop
2015-04-09 20:43:04 -07:00
f2507f869f
Bugfix: Typo in wscan text output resolved
2015-04-09 20:41:54 -07:00
ce72e3c9f3
bugfix: changed refresh message to minutes
2015-04-09 17:19:03 -05:00
193d63094d
feature: added vtun config files to keep list during sys upgrade
2015-04-09 11:10:09 -05:00
bd3190a8ff
bugfix: added @ to acceptable password chars
2015-04-09 10:57:57 -05:00
5dd3e19c42
bugfix: disabled vpn debug mode
2015-04-09 10:53:45 -05:00
16538f8a45
bugfix: validate password for only alphanumerics
2015-04-09 10:49:54 -05:00
cf1ddb900b
bugfix: network/start now resets to default, added icons for pages
2015-04-09 10:14:04 -05:00
fcce4039db
bugfix: vpn page now saving clients to ici
2015-04-08 21:17:34 -05:00
ff057d3488
bugfix: change navbar spacing to accomodate tunnels
2015-04-08 19:59:39 -05:00
6ff8986810
retrieve connections via uci
2015-04-08 19:44:41 -05:00
cb3867d0f7
feature: vpn page reads from uci, uci lib updates, aredn.css update
2015-04-08 19:04:43 -05:00
c40a42562f
feature: implement vtundsrv startup script. make 13-vtun vtund aware
2015-04-08 00:15:36 -05:00
82611bb57e
bugfix: NanoStation M5 XW device config was malformed
...
ref AREDN->ticket:43
2015-04-07 22:11:56 -07:00
54210a2d7e
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into tunnel_mainline
2015-04-07 23:09:29 -05:00
96636f442e
Merge branch 'NanoStationXW' into develop
...
Add initial testing support for NanoStation M5 XW into develop tree.
ref AREDN->ticket:43
2015-04-07 20:39:33 -07:00
853430dbdf
hardware: Add testing support for NanoStation M5 XW
...
ref: AREDN->ticket:43
2015-04-07 20:37:58 -07:00
c0c59a8795
feature: installation of tunnel software via vpn page button
2015-04-07 17:06:57 -05:00
eeebc9ac09
Merge branch 'develop' into tunnel_mainline
2015-04-07 10:59:06 -05:00
908626336f
bugfix: Configuration NOT Saved? Can't open '/etc/ared_include/system_netled'
...
File wasn't created on boot due to a missing space in if statment.
In addition other services would not start.
2015-04-07 08:51:32 -07:00
e6d08f5606
merged from develop
2015-04-07 10:36:42 -05:00
928e7e720a
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into dyn_css
2015-04-06 23:20:12 -05:00
f6f3aaef9e
Merge branch 'TPLinkCPE' into develop
2015-04-06 21:14:39 -07:00
0b7eb2876a
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into dyn_css
2015-04-06 23:11:32 -05:00
3ba26cea4c
fix: added .local.mesh to sys upgrade links
2015-04-06 23:08:52 -05:00
f4cb866a8b
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into dyn_css
2015-04-06 23:05:04 -05:00
e7c3cdc909
bugfix: CPE510: Network activity led's broke after config save
...
Save the port mapping for link_lan led's for use in the system file so that the link led's will work after save and reboot
2015-04-06 21:03:13 -07:00
bb4f43ca4c
feature: auto-refresh after sys upgrade, chg link to codename when sys upgrade
2015-04-06 17:10:06 -05:00
33d490aaa7
cleaned comments regarding linking style.css
2015-04-06 15:38:07 -05:00
714a3d6f54
added symlinked style.css to /www
2015-04-06 15:37:21 -05:00
09af80b17e
check for .css file extension being passed
2015-04-06 14:47:09 -05:00
b6805ca15f
bugfix: CPE510: LINK1 LED doesn't illuminiate with neigbors in range
...
LINK1 LED was based on Ubiquiti file names, changed to determine base on file name instead.
This should open up more device support long term as well as solve the initial issue.
2015-04-06 11:57:37 -07:00
5629ce93b7
bugfix: CPE510: Does not set nodecall or other mac based settings on boot
...
Change the location lookup to looup based on the radio0.path setting to obtain the mac address.
2015-04-06 11:27:50 -07:00
6e74aaf0f4
bugfix: CPE510: networking does not function after initial config save
...
After saving the config the lack of the root level switch entry which enables vlans and resets the switch causes the network to shutdown.
2015-04-06 10:44:05 -07:00
b8dcc50fb9
changed help text
2015-04-06 09:43:05 -05:00
3c07872f06
bugfix: Make sure we create the swconfig file even if it will end up empty.
...
If we don't create the file the system will have nothing to include later on and the script will run on every boot
2015-04-05 23:05:42 -07:00
79902f0876
hardware: CPE510: Retain device path information and import into configs at save time.
...
Save the intial path at install and include it each time we save the config
2015-04-05 23:04:32 -07:00
8faab9c11c
wireless: Let the OS build the default wireless config
...
The first wireless config will be built by OpenWRT instead of us.
2015-04-05 22:40:02 -07:00
63bb07b617
hardware: CPE510: Add initial hardware support for TPLink CPE510 in testing
...
Testing mode for CPE510
Offset needs to be looked into, OS reports a max power of 23dbm need to see if this is kernel, or offset related.
Should provide enough details for the board to be registered in the UI
2015-04-05 22:16:24 -07:00
7c152d7c1e
hardware: Expand board_id routine to allow TPLink devices to be obtained
...
When a device does not have a subsystem device ID we will fall back to the board_detect routine.
In the case of a TPLink CPE510 the model will be along the lines of "TP-Link CPE510 v1.0"
In the case of TPLink CPE510 this also includes a hardware version so should the hardware be changed in the future we will be able to key off that as well.
2015-04-05 22:07:47 -07:00
08600fd4e8
hardware: Update get_model to use the ar71xx board detect routines
...
Returns the same data for devices as CPUInfo would of returned for previous devices and for new devices like the CPE510 causes the system to list the exact model instead of of the family.
2015-04-05 21:58:03 -07:00
31bd519266
hardware: AR934x: Pull in stored swconfig information when saving configs
2015-04-05 21:06:39 -07:00
dccd1ea42c
hardware: AR934x: Store swconfig information for future use
2015-04-05 21:03:50 -07:00
4f18f20495
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into dyn_css
2015-04-05 21:20:04 -05:00
df0bc42208
feature: converted css to use symlinks and multiple files
2015-04-05 21:19:32 -05:00
a82b4be70f
Merge branch 'wscan' into develop
2015-04-04 22:29:35 -07:00
8b9ac8639a
Enhancement: wscan vendor column replaced with mode
2015-04-04 22:27:51 -07:00
7c216480a5
Merge branch 'wscan' into develop
2015-04-04 22:01:21 -07:00
6672996cd3
added ability to have multiple css files
2015-04-04 23:49:31 -05:00
61c15f7eeb
added style for wscan nodes
2015-04-04 10:44:45 -05:00
2dd866b7a0
Fix for wscan to accept AREDN and custom SSID formats
2015-04-02 22:13:23 -07:00
ade8026e32
fixed function calls that were moved to external lib (to save space)
2015-04-02 11:52:46 -05:00
0ab44e4731
wscan update to show neighbor mesh node signals
2015-04-01 21:49:07 -07:00
a8d68cd021
fix tunnel UI and style the install button
2015-04-01 17:32:55 -05:00
b074fd6985
consolidated functions to reduce duplication (save space)
2015-04-01 17:26:52 -05:00
eb92e16e68
remove bad character
2015-04-01 17:09:41 -05:00
2461d4acd8
add vpn and vpnc pages to UI menu
2015-04-01 17:09:18 -05:00
ba045c292a
bugfix: channelmaps: 3400 frequency was showing 54**
...
Forgot to change the 5 to a 3 when writing the channelmap
2015-04-01 10:07:30 -07:00
32600d5467
initial deploy
2015-04-01 10:42:53 -05:00
5414cb2f86
bugfix: Correct bandmapping to 3400 for Rocket M3
2015-03-31 23:50:05 -07:00
6c91ec0ab4
Add channels that are within normal 5.8GHz unit range for Rocket M3 usage.
...
M3 is a 5.8GHz unit with a 2GHz offset transverter.
5MHz width is recomended on these channels.
Send to spectrum analysis for verification that output looks clean.
Stepping stone to working on the wider width of the full 3.4GHz band which has more channels but unlike channels 95-100 (added in this commit) the rest are outside the normal 5.8GHz cal range (but are between two cal points so may be fine)
2015-03-31 23:42:22 -07:00
a73e459263
Merge branch 'DynamicInterfaceNames' into develop
2015-03-27 23:56:14 -07:00
8df5b5ff49
Merge branch 'cleanupoldfiles' into develop
2015-03-27 19:24:27 -07:00
303c9c264f
cleanup: opkg.conf is now built by the BuildRoot and is no longer needed.
2015-03-27 19:20:23 -07:00
0dbe83c61e
feature: Make nodes advertised targeted network routes to mesh.
...
Makes the nodes advertise using DHCP Options 121 and 249 routes to the mesh (10.0.0.0/8) and the reserved (172.16.0.0/12) address ranges.
This change allows directing systems to prefer the mesh node for mesh ranges unless another network rule is more specific (such as a directly connected network)
This is mostly useful where a PC may have multiple network connections active as it improves the desire for the packets to travel via the mesh network.
Currently the:
10.0.0.0/8 range is used by mesh nodes and dtdlinking of mesh nodes.
172.27.0.0/16 is used for default LAN network on NAT nodes.
172.33.0.0/16 is for ad-hoc tunnels
All others in the advertised range are reserved for future network use.
2015-03-27 11:30:52 -07:00
16576d7bde
bugfix: dtdlink is by default on eth0.2 not eth0.1
2015-03-26 16:47:33 -07:00
93b922596f
bugfix: node setup errors out on saving network file
...
Several _intf entries in the network file were named in reverse causing the node-setup script to be unable to save them
2015-03-26 01:47:06 -07:00
dc22c906b0
bugfix: node-setup errors out with =for error.
...
Remove extra line added to first line in node-setup in 99182e2b52
2015-03-26 01:38:58 -07:00
0d11af70b9
bugfix: Unknown interfaces wouldn't return default interface.
2015-03-26 01:31:50 -07:00
ee16f91c95
Remove programs that are not used by us.
2015-03-25 17:03:23 -07:00
99182e2b52
feature: Convert network settings files to use dynamic interfaces
...
config.*/network files now use dynamic interface names so that they can be changed on the fly in the future.
2015-03-25 14:02:38 -07:00
ac93a0346f
feature: migrate scripts to use get_interface
...
nvram-setup may be the only script we have to worry about as it may call configs for interfaces that do not exist in the current mode.
By default get_interface will return a static mapping when it can't find an active config entry meaning that eventually get_interface will need an update routine to pull out of local running config
The lack of this update routine should be acceptable for now as we have no GUI for users to change the mapping.
2015-03-24 23:41:51 -07:00
9444716fbd
feature: Add function and code to UI code to prepare for changing interface names in the core OS.
...
Create get_interface which will lookup in the current uci network config the realname for the logical interface name.
When the interface is not found it will fall back to a hard coded list.
Configure the UI to use the new get_interface function.
2015-03-24 23:25:18 -07:00
097d62ae01
bugfix: OLSRD doesn't start on node reboot
...
Under Barrier Breaker sometimes OLSRD gets started before any interface is up causing OLSRD to shutdown because no interfaces exist.
Forces OLSRD to stay on and wait for the interfaces to come online.
2015-03-23 22:57:48 -07:00
50c4e0ed11
bugfix: nodes sometimes show up as mid1
...
Nodes sometimes show up as a mid1 entry when dtdlink and RF connected.
Sometimes the nodes will get the eth0 ip because wlan0 is not up yet.
Under Barrier Breaker the MainIP option is now supported as part of the uci system which allows us to restore using this setting.
We can now force the IP address that is claimed (wlan0) for the primary IP of the node.
2015-03-23 22:55:09 -07:00
a5d9c3ee52
Merge branch 'UpgradeToBB' into develop
2015-03-23 17:36:35 -07:00
078ab54f06
bugfix: sysupgrade : OLSRD and LAN interface do not work after sysupgrade
...
Variables were not being being synced to _setup because they do not exist in _setup.default so we need to manually sync them over.
2015-03-23 17:25:18 -07:00
b3fb1ed13e
bugfix:Correct Firmware not valid error when uploading a sysupgrade file
...
In Barrier Breaker the symlink in /etc/ has been removed so we need to refer to the file direct.
2015-03-21 23:03:24 -07:00
5db6e2a747
Merge branch 'hotfix-3.0.2' into develop
...
Conflicts:
files/www/cgi-bin/admin
2015-03-13 20:56:46 -07:00
0b04c442dd
bugfix: Remove references to WRT54*'s
2015-03-11 16:40:31 -07:00
c4a29903fb
bugfix: Make AREDN(TM) Logo visible in "night" mode
2015-03-09 21:35:24 -07:00
39a7ab878b
bugfix: Cleanup display of rebraned pages.
...
Add missing AREDN(TM) Logo and fix other pages that were missing the footer text.
2015-03-09 19:28:59 -07:00
e146193b65
Rerand from BBHN to AREDN(TM)
...
Since a large number of the BBHNDev team has decided to create firmware fully independent of the BBHN Project the decision has been made to rebrand the firmware to differentiate from the origional BBHN work.
We would like to thank all those whom have worked on the BBHN firmware over the years and all those who continue to work on the firmware under AREDN(TM).
2015-03-09 16:39:04 -07:00
633c83f7f7
Merge branch 'hotfix-3.0.1' into develop
2015-02-04 08:16:30 -08:00
dc24e1d05d
Merge branch 'MakeLinksFQ' into develop
2015-01-25 21:08:16 -08:00
243d5fc714
bugfix: Set hidden flag on dtdlink host names so they do not show up in the "Remote Nodes" list.
2015-01-25 10:56:23 -08:00
7c22853a17
Change OLSR Status button to use node FQDN
2015-01-23 18:30:39 -08:00
a2944c7e30
Configure status page to present FQDN's as long as the link does not contain a period.
2015-01-23 18:25:25 -08:00
5c3ee1d068
bugfix: Add GPLv3 license text to core BBHN Mesh files
...
Program went GPLv3 last year but license text was never added to files
Default text to give credit to David as he is listed in all commits and to reference the BBHN Austin team at the same time as they were part of the group of HAM's that started this project.
2015-01-18 11:36:49 -08:00
fde5c1367e
bugfix: olsrd-watchdog false triggers a reboot.
...
Using the method suggested by Henning Rogge in 2014
{{{
1) remove file
2) wait 2 intervals
3) if file exists, go to 1)
4) restart olsr, then go to 1)
}}}
With the exception that we currently wait more than 2 intervals.
Even if the script hits a collision at the same time the file is being written the file will already exist from one of the previous writes or the current write.
Removing a file in use is safe as once the FD closes the file contents are fully released.
Additional Advantages:
* Should be more efficient to check if file exists instead of reading the file and comparing date stamps.
* Removing the Perl code moves us one step closer to retiring Perl in the future.
2015-01-15 16:35:55 -08:00
f52513aa15
bugfix: Update url for admin downloads
...
Previous URL may not have latest firmware list.
2014-12-14 22:56:45 -08:00
917573cf95
hardware:bugfix: AirGrid M2 0x212 remove power offset to facilitate testing
...
Removing the offset and increasing max power so we have full range avaliable to us.
This may not help us figure out the offset but will allow us a wider range of options.
ref BBHN->ticket:71
2014-12-14 10:54:05 -08:00
b7dcfdd9ce
hardware 🆕 Add testing support for AirGrid M2 0xe212
...
Reported information and board information do not appear to line up, device will need further testing to verify actual details.
Max Power and Power Offset are of concern.
ref BBHN->ticket:71
2014-12-14 10:37:48 -08:00
b5dba400cc
bugfix: Update URL for opkg database.
...
Previous URL may not have latest packages.
2014-12-13 23:30:54 -08:00
1ed509132f
bugfix: dhcp lease dropdown lists too many addresses.
...
fixes BBHN->ticket:69
2014-12-12 00:08:31 -08:00
44bf0bd4f0
bugfix: non mesh-gw nodes may use a less than optimum route to internet.
...
When a non mesh-gw node has a route via the WAN interface and through a mesh-gw it will choose the mesh-gw instead of the local WAN connection.and
We change the routing list to prefer the WAN link.
When the WAN is static configured the user will need to disable the WAN interface for the mesh internet to be chosen.
When the WAN is configured to dynamic the loss of a DHCP lease will allow the node to chose the remote mesh internet.
The simple solution would be to change the WAN to disabled and reboot to ensure a remote node is used instead if the local internet fails.
Thanks to Joe AE6XE and Clint AE5CA for pointing out this scenario.
2014-12-11 23:42:27 -08:00
c1de09455e
Merge branch 'release-3.0.0' into develop
2014-11-25 10:25:47 -08:00
4daf0e4f7e
Merge branch 'sysupgradekeepsettings' into develop
2014-11-12 21:29:05 -08:00
cccf5a2ad7
feature: Add the ability to upgrade in place and keep settings.
...
By checking the "Keep Settings" box the node will run sysupgrade instead of mtd. Core settings are stored between installs and the _setup files are updated by pulling in missing items from the _setup.default files.
2014-11-12 21:25:41 -08:00
d5af5c97cf
support status: Mark Rocket M9 as supported.
2014-11-03 20:26:47 -08:00
94981313f8
bugfix: rework olsrd-watchdog to avoid race condition
...
The olsrd watchdog module truncates and writes the latest timestamp every 5 seconds. The olsrd-watchdog script could catch the file during write causing an instant restart.
Changed to want 3 failures before restarting olsrd reducing the chance of collision based restarts.
fixes BBHN->ticket:68
2014-11-03 19:59:34 -08:00
5a39316a7e
hardware: support: Loco M9, NanoBridge M9 test: RocketM9
...
tag NanoStation Loco M9 and NanoBridge M9 into supported status
begin testing Rocket M9 support
ref BBHN->ticket:66
fixes BBHN->ticket:51
2014-10-20 19:45:46 -07:00
742f8ec4ac
bugfix: Differenece between short hold and long hold on the reset button is too small.
...
Time is now around 5 seconds for a passwd+dhcp reset (3-7 seconds window) and around 15 seconds for a full reset (12-20 seconds window)
2014-09-17 10:53:19 -07:00
f5a9861700
bugfix: bbhnrecoverymode uhttpd needs to be restarted.
...
uhttpd may not pick up new passwords unless it is restarted after the change.
2014-09-15 16:56:41 -07:00
fb91eadfef
bugfix: Make bbhnrecoverymode executable.
2014-09-12 12:07:16 -07:00
a9ed10de33
feature: Use reset button to make field recovery easier.
...
Cleaner version with the config files included in the commit.
2014-09-12 12:03:16 -07:00
2e0b2cbd90
feature: Use reset button to make field recovery easier.
...
Using a press of around 5 seconds (3-7) the node will reset the passord to BBHN default and enable dhcp on the lan interface.
A press of around 10 seconds (8-12) will cause the node to reset the node to 'just flashed' status and cause the node to reboot.
2014-09-12 12:00:14 -07:00
28dfb852cc
bugfix: fix wscan 'unknown' network handling
...
Unknown networks are not quoted like known networks are.
This caused a bug where the last network name may be incorrectly used in place of the words 'unknown'
fixes: BBHN->ticket:58
2014-09-11 23:25:02 -07:00
ed4b583277
Due to the following commits we need to increase the protocol version to V3
...
changeset:0e845a1743d3693fd5e1257f38b704c864f52220/bbhn_ar71xx
changeset:8417274fc4233bf0002c721d836e4fa5953f3db1/bbhn_ar71xx
2014-09-11 23:16:27 -07:00
0e845a1743
Merge branch 'newssidformat' into develop
2014-09-11 23:07:10 -07:00
9ae98554cf
bugfix: Disable OLSRD Secure untill we can work on it more.
...
Due to multiple issues that olsrd secure seems to make occur more often (but is not soley caused by OLSR Secure) causing olsr to crash olsr secure is being pulled while we work on the module.
This partialy reverts commit 553c126490
2014-09-11 23:02:47 -07:00
6da1ad8b4e
feature: Change SSID format to include rf channel bandwidth and protocol version
...
From now on all node SSID's will be NAME-<rf bandwidth>-v<protocol version>
tag: RequiresProtocolIncrement
2014-09-11 21:29:54 -07:00
6036dc3ff6
bugfix: Enable watchdog in olsrd
...
Watchdog never got enabled in the olsrd config files.
fixes BBHN->ticket:60
2014-08-07 23:13:54 -07:00
c6e4aa3903
bugfix: DHCP Lease limit is down by one from what it should be.
...
ref BBHN->ticket:57
2014-07-24 21:58:20 -07:00
422e40c5ea
Merge branch 'initialm9devices' into develop
2014-07-14 23:02:03 -07:00
32a67e1b2c
Add initial testing support for M9 devices
...
ref BBHN->ticket:51
2014-07-14 23:01:16 -07:00
Darryl Quinn