ae2bc531b2
hardware: board add: Rocket M5 with USB Port
...
board.info
{{{
board.sysid=0xe105
board.cpurevision=0x000000c2
board.name=Rocket M5
board.shortname=R5N
board.subtype=
board.netmodes=7
board.hwaddr=00156DDC9D53
board.reboot=30
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=1524
board.phy.2.maxmtu=1524
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe105
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.offset=5
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=0
}}}
2015-07-23 21:24:21 -07:00
2755094c9f
Merge branch 'FixupTPLinkPower' into release-3.15.1.0
...
Deals with the fact that TPLink has max powers that differ based on frequency and are programed into the chip lower than what the manufacture states in its datasheet.
We want to make sure we don't fry any boards so we honor what the chip programming is set to.
2015-07-22 23:20:23 -07:00
5f66df447f
add help text and icon for power setting info
2015-07-22 23:16:24 -07:00
912afe3713
added channel bandwidth
2015-07-21 12:19:41 -05:00
108e05088b
bugfix: Add max power level tracking control for per channel power on devices
...
Mainly relates to TP-Link devices which have a roving power level programmed into the hardware.
The datasheets for the hardware may say higher power but the chip has been programmed to not go above these values.
2015-07-20 23:30:49 -07:00
9b30e157bc
bugfix: Set max power for device to TPLink programed "max power"
...
This is the absolute maximum that can be used by the device from TPLink eprom programming.
The value actually goes down on some frequencies.
2015-07-20 21:38:01 -07:00
cb09c22275
feature: changed version element name, added grid square
2015-07-16 19:21:41 -07:00
2a63226ad3
feature: added board_id to output
2015-07-16 19:21:41 -07:00
0cd0db2d0d
feature: add sysinfo.json for programmatic lightweight management interface
2015-07-16 19:21:41 -07:00
3c0f3ad144
bugfix: tunnel install not posting to same page
2015-07-12 23:26:09 -05:00
3576a2c00b
Merge branch 'RemoveIWINFOCalls' into release-3.15.1.0
...
Move from iwinfo to iw where possible
Discovered while discussing another issue about ssid's
ref AREDN->ticket:132
2015-07-09 21:05:14 -07:00
0fdeb4e7eb
bugfix: extend support tool to capture more info from iw as we now use it more than iwinfo
2015-07-09 21:03:06 -07:00
650d1bca28
bugfix: nodeupgraded needs to be set before taring up the archive
...
ref AREDN->ticket:131
2015-07-09 20:01:32 -07:00
87f655f103
Merge branch 'FixSYSUPGRADEBackups' into release-3.15.1.0
...
ref AREDN->ticket:131
2015-07-09 18:21:35 -07:00
d7be9104d9
bugfix: We need to only pull a small selection of files over through sysupgrade instead of all config files.
...
opkg config can cause issues on OS upgrade among others.
ref AREDN->ticket:131
2015-07-09 09:25:00 -07:00
0359796a33
bugfix: detect tun passwords with only numbers
2015-07-06 23:32:41 -05:00
8eabf6ad00
bugfix: snr setting was setting SignalLevel instead of NoiseLevel
...
ref AREDN->ticket:129
2015-07-02 22:43:01 -07:00
c4c808f98c
Merge branch 'FixupRefDMZLed' into release-3.15.1.0
...
Remove references to DMZ led and replace with "Status 4" led
2015-07-01 23:25:56 -07:00
8e0943f8e0
bugfix: Pull dtdlink and tunnel from remote connections display.
...
Due to issues we are pulling the showing of tunnels untill we can better detect them.
We are also pulling dtdlink as all AREDN nodes should have dtdlink enabled.
2015-07-01 23:21:51 -07:00
305dbb143e
bugfix: ".local.mesh" being added to already qualified domain names.
...
fixes AREDN->ticket:127
2015-07-01 23:10:13 -07:00
a46bbf27d8
bugfix: sometimes iw doesn't show noise floor
...
Pull from kernel debug instead for now untill we can work around it in iw.
fixes AREDN->ticket:129
2015-07-01 10:05:58 -07:00
13db1b02a2
bugfix: Remove ref to DMZ Led on first node reboot
2015-06-30 08:36:45 -07:00
39729157c6
bugfix: Signal levels do not show up on "new extended" RF Channels
...
Switch to iw over iwinfo because it handles the new channels better.
Partially reverts changeset:808a8d5019fce4a7ca2c027ea7838d43c6d8cad0/aredn_ar71xx
fixes AREDN->ticket:129
2015-06-30 00:05:45 -07:00
9481c21db6
bugfix: fixes AREDN->ticket:128 remote neighbor incorrectly shown as having tunnel
2015-06-21 22:06:40 -07:00
f915225459
bugfix: Add in-testing support for older NanoStation M5 XW boards
...
board.info provided by VE3KMV
{{{
board.sysid=0xe005
board.cpurevision=0x000000c2
board.name=NanoStation M5
board.shortname=N5N
board.subtype=
board.netmodes=7
board.hwaddr=00272232336C
board.reboot=30
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=1524
board.phy.2.maxmtu=1524
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe005
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.offset=5
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=16
}}}
2015-06-21 19:24:43 -07:00
ff43a707c1
cleanup: Make note about automatic antenna selection look better on screen
2015-06-18 21:15:05 -07:00
547069986c
bugfix: Antenna selection handle by kernel: Cleanup errors reported by build tests.
2015-06-18 21:09:10 -07:00
21edf5fa02
bugfix:Let kernel handle antenna selection: Remove antenna name mapping data.
2015-06-18 20:18:03 -07:00
ea9dfc5d1a
bugfix: Let kernel handle antennas:Remove sub functions wifi_validant and wifi_defaultant
2015-06-18 20:15:47 -07:00
ee90c366aa
bugfix: The 'hack' we have been using to set RF chain has been discontinued.
...
Trying to registry over-write the antenna setting has never been a good idea in the first place.
The hardware fully handles antenna selection without forcing it already.
ref AREDN->ticket:120
2015-06-18 18:57:04 -07:00
d1253c0d9d
bugfix: Channel "0" means "Problem" inside the kernel.
...
To overhaul the system to allow "0" would take a significant re-write of kernel code. At this time its best to pull channel '0' as it is not in any clear RF space (channel 1 overlaps it)
ref AREDN->ticket:114
2015-06-18 18:35:41 -07:00
3d7893fd46
Revert "Revert "fixes AREDN->125""
...
This reverts commit d917b5b2ec
2015-06-17 00:40:34 -05:00
d917b5b2ec
Revert "fixes AREDN->125"
...
This reverts commit 7a05f76c93
2015-06-17 00:39:07 -05:00
7a05f76c93
fixes AREDN->125
2015-06-17 00:38:13 -05:00
8619bd379e
bugfix: force node name to upper in config files for tunnel client
2015-06-16 23:13:58 -05:00
02c756a489
Merge branch 'MeshBugfix' into release-3.15.1.0
...
Fixes AREDN->118:Mesh Status links incoorect
2015-06-14 23:09:42 -07:00
4ce0e1e21d
Fixes AREDN->118:Mesh Status links incoorect
2015-06-14 23:06:32 -07:00
807f381a04
bugfix: network and firewall tunnel rules reworked
2015-06-14 23:30:06 -05:00
cc2415faf0
bigfix: active icon not appearing on server
2015-06-14 20:50:54 -05:00
91762973a5
bugfix: tunnel firewall changes
2015-06-11 01:02:55 -05:00
81ac8b7fbe
bugfix: losing network interfaces after node-setup
2015-06-11 00:40:14 -05:00
a2456e4df9
bugfix: made firmware upgrade "keep settings" checked by default
2015-06-02 14:49:49 -05:00
f1df364997
bugfix: mesh stat: previous neig remove mid notation, show double same neigh {rf,dtd}
2015-05-25 10:46:15 -07:00
2e5c239ed5
bugfix: mesh stat added ref to wan gateways, was ommitted alongside dtd & tun.
2015-05-25 09:25:38 -07:00
b314c4539f
bugfix: correctly show primary wifi hostname for all references, etx sort, denote dtd & tun* iface
2015-05-24 22:43:26 -07:00
e25756ffbe
setup: mesh gateway: Better define as an advanced feature.
...
Better define the Mesh Gateway as an advanced feature.
Increase documentation in help about what the feature does.
ref AREDN->ticket:109
2015-05-24 15:37:56 -07:00
af1eaa1107
Merge branch 'CleanupTunnels' into release-3.15.1.0
...
various fixups to improve the quality of bringing tunnel's into mainline code
2015-05-24 15:18:54 -07:00
1f4fa46887
supporttool: Add nodename and tsamp to default filename
...
add nodename and tstamp to default filename to reduce chance of submitting wrong file
timestamp may not always be 'real' time if a node does not have ntp access
2015-05-24 14:17:31 -07:00
23b634e6ac
bugfix: supportool: Sensitive files are being included in the support dump.
...
Add feature to remove files that are sensitive (such as vtun configuration with passwords)
2015-05-24 13:47:16 -07:00
c788d2daff
supporttool: Obtain better diagnostic information
...
Add dmesg
fix olsrd collection to obtain actual information
2015-05-24 13:29:49 -07:00
Conrad Lara - KG6JEI