664f2ee629
Some LUA Code Clean Up, API ( #327 )
...
* Refactor API
* work in progress
* lua clean up
2019-01-21 15:41:31 -06:00
13a6afb815
aredn: Add definitions for Rocket M2 XW
2019-01-10 17:10:46 -08:00
6728fba06b
bugfix: aredn sysinfo.json fails with mesh rf off
...
added json meshrf->status->on/off
fixes: #317
2018-12-22 10:14:58 -08:00
0fed66dbf5
bugfix: bogus warning when selecting firmware file to sysupgrade
...
fixes : #290
2018-12-19 20:30:23 -08:00
8778b07bc6
bugfix: helpfile spelling correction
...
fixes : #311
2018-12-18 20:41:49 -08:00
588b59cf65
aredn: Add definitions for Mikrotik RB-911G-5HPnD
2018-12-18 20:40:58 -08:00
1c6d2286cc
aredn: hap ac lite add 2G/5G lan ap options
...
Add option for hap ac lite to select which band to
use for LAN AP option, 2GHz or 5GHz. Also, ensure
all wireless cards are defined when disabled to
prevent default wireless config options.
2018-12-17 20:13:37 -08:00
d188fcf980
bugfix: firstboot button does not function
2018-12-12 19:08:46 -08:00
97938b4697
bugfix: remove SNR from signal archive page ( #309 )
...
fixes #242
2018-12-12 18:11:40 -06:00
513406754f
aredn: clarify distance setting in help ( #299 )
...
closes #279
2018-12-12 15:17:04 -06:00
f777e914f9
aredn: Mesh RF enable/disable ( #307 )
...
add feature to turn off Mesh RF if not in use. When off,
section to re-purpose wireless card to LAN bridged Access
Point becomes visable.
Closes #155
2018-12-12 15:16:07 -06:00
b9bf9ba099
ar71xx: Add Support for the TP-LINK CPE220 V2.0 Device ( #306 )
...
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
2018-12-11 17:09:11 -06:00
8f71b15d4a
bugfix: Advanced config settings not persistant though reboot ( #305 )
...
fixes #303
2018-12-11 06:47:36 -06:00
230eddf8bb
ar71xx: Add Support for the TP-LINK CPE510 V3.0 Device
...
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
2018-12-10 14:38:00 -08:00
7486a179c7
aredn: add support for Mikrotik LDF-5nD
2018-12-07 21:36:03 -08:00
9d60516176
ar71xx: Add Support for the TP-LINK CPE220 V3.0 Device
...
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
2018-12-05 19:38:46 -08:00
6982757c79
ar71xx: Add Support for the TP-LINK CPE610 V1.0 Device
...
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
2018-12-03 19:25:48 -08:00
123949de9e
aredn: Standardize Ethernet Port vlans for UBNT XM devices ( #297 )
...
The secondary port on Ubnt XM devices was non-functional.
Enabled bridge type in network config to utilize both ports.
2018-12-02 17:52:48 -08:00
303c50904c
aredn: harden hAP ac lite 5Ghz Lan Access Point ( #293 )
...
enable passwords with virtually any character, enable SSIDs
with virtually any character. ensure ap is always
encrypted to give operator control of client access and
license compliance. Remove (week) WEP encryption option.
2018-11-30 08:32:38 -08:00
7792186dda
feature: provide more info on upload disable with tunnels ( #289 )
2018-11-28 22:37:11 -06:00
a62fe95b26
aredn: hAP ac lite enable 5GHz LAN Access Point ( #287 )
...
* aredn: hAP ac lite enable 5GHz LAN Access Point
enable ability to bridge LAN physical ports with wireless
LAN Access Point capability. On dual band hAP ac lite,
used in parallel with mesh RF on 2GHz. Enables future
features on single band devices to turn off mesh RF and
repurposed for mesh LAN Access Point.
closes : #215
2018-11-27 21:37:59 -08:00
557e4b3903
Revert "feature: reduce bandwidth by compressing resource files ( #278 )"
...
This reverts commit 2d5beb232f
2018-11-23 18:41:18 -08:00
2d5beb232f
feature: reduce bandwidth by compressing resource files ( #278 )
2018-11-22 23:59:39 -06:00
355e34080f
aredn: Add definitions for Mikrotik LHG-5HPnD-XL
2018-11-17 10:40:33 -08:00
a997ef9545
bugfix: Found another place where uhttpd was tossing a uci error. Fixed
...
Also removed the description block from the mesh page if the description has not been set.
(there was a small grey area before, even with no description set)
2018-11-14 19:37:02 -08:00
311f4eff3d
bugfix: suppress uhttp uci error on mesh page with no description ( #267 )
2018-11-14 16:16:51 -06:00
a2f32e041b
bugfix: litebeam M5 is single chain device ( #265 )
2018-11-10 21:51:21 -06:00
c8e13ae797
aredn: Add definitions for Mikrotik LHG5
2018-11-10 13:53:45 -08:00
a88803fe5a
bugfix: correct "Bad Gateway" error on Advanced Config page ( #263 )
2018-11-08 14:08:51 -06:00
17c08a8ffa
aredn: Add LiteBeam M5 definition ( #261 )
...
fixes #257
2018-11-07 20:27:57 -06:00
861de150ea
feature: add USB passthrough support to advancedconfig page ( #255 )
...
* feature: add POE passthrough support to advancedconfig page
* correct shellcheck warnings
2018-11-06 16:00:26 -06:00
700f020e25
ar71xx: add TP-LINK CPE210 V3.0 and CPE510 V2.0 profiles
...
Adds a separate profile and binary for both devices.
fixes #221
2018-11-05 22:28:03 -08:00
9a47ff800a
bugfix: correct poe functions in adv cfg ( #250 )
...
* bugfix: correct poe functions in adv cfg
cleanup shellcheck errors
* avoid unnecessary shell
2018-10-27 11:37:45 -05:00
e8b3520ec7
bugfix: Check to prevent duplicate mesh hostnames when reserving DHCP reservations ( #226 )
...
* bugfix: Check for existing hostnames on the network in DHCP reservations
fixes #216
*additional check for existing hostname when creating new DHCP lease.
checks hosts_olsr file if entered hostname already exists or not on the connected network(s).
outputs info saying such and gives advice to prefix hostname with callsign.
* change to use =~ /\s$host\S/i
* Reworded warning message
* moved the position of the hostname check to only when you click "add" on the DHCP leases page.
this stops it checking all the previously entered hostnames.
2018-10-26 21:53:14 -07:00
1948ba11e7
bugfix: fix reboot button ( #249 )
2018-10-26 19:50:35 -07:00
8716fd42be
Add PoE passthrough option to advanced config ( #243 )
...
* minor changes
* handle null value (change to 0)
* add poe_passthrough script
* change key location
* change key name
* add default info into aredn uci file
* add conditional functions
2018-10-26 19:34:16 -07:00
d74eb1933a
aredn: adjust mesh status layout for OLSR stats ( #248 )
...
fixes #197
html is courtesy of N2MH
2018-10-26 14:25:45 -05:00
750cba55a7
modify the adv config layout ( #247 )
2018-10-26 00:27:15 -05:00
4a50ee2382
aredn: add definition for Bullet M2 XW ( #246 )
...
New Bullet M2 XW models are released by ubnt.
closes #233
2018-10-25 23:44:45 -05:00
a1ab5312ef
bugfix: allow upload of ssh keys while tunnels since keys ( #245 )
2018-10-25 23:43:20 -05:00
9391ff5555
Add "Advanced config" page ( #237 )
...
* initial commit
* feature: advanced configuration page
fixes #230
* add help page updates
* added menu links to perlfunc.pm
* add default value for serverpath
* move "Reset to Firstboot" button from setup page to advancedconfig page
* secure page
minor ui changes
* center the help icon
* implement callback capabilities pre/post
* hardening uci calls to prevent command injection attacks
* moved settings to custom aredn uci file
* resolve shellcheck warnings
2018-10-25 21:06:05 -05:00
a4ac376065
bugfix: correct improper "wrong firmware" message on Rocket (et al) devices ( #240 )
2018-10-24 19:57:21 -05:00
ea36aa9d06
feature: add a "firstboot" button on setup page ( #225 )
...
* feature: add a "firstboot" button on setup page
fixes #162
* changed confirmation message
2018-10-18 11:06:55 -05:00
b11a4fc95d
bugfix: check to see if internet is reachable before loading external resources ( #224 )
2018-10-15 21:58:52 -05:00
7a1817935c
feature: Provide firmware file advice for uploading firmware files ( #217 )
...
* feature: Provide firmware file advice for uploading firmware files
also reduces page size by removing unnecessary style info on option tags.
fixes #206
* update for Mikrotik filename exceptions
* correct download .list file name
* add support for cpe devices
2018-10-10 15:52:27 -05:00
6f9a8327cb
bugfix: Fixed README and comment typos ( #220 )
...
* typos
* Update README.md
* Update aimer
2018-10-08 07:44:13 -07:00
c622140ef9
aredn: Prepare 3.18.9.0RC1 for release
2018-09-21 19:50:57 -07:00
b432be987f
bugfix: aredn: correct test script warnings and errors
2018-09-17 21:42:52 -07:00
89682289c1
modify sysinfo.json structure for node,lat,lon values ( #193 )
2018-09-17 13:41:29 -05:00
1c4e6f1ecc
remove ipv6 address labels (ie. none) ( #189 )
2018-09-13 20:02:07 -05:00
c5e9342e29
aredn: add zombie.log to supporttool list
2018-09-13 16:19:10 -07:00
c2894f8df9
rework sysinfo.json to improve structure ( #185 )
...
* rework sysinfo.json to improve structure
re-organize "info" functions into their own lib
* change egrep to grep -E to eliminate shellcheck warning
2018-09-10 13:37:50 -05:00
cb35580fd2
bugfix: show freq on status page instead of channel number for 3GHz
...
3GHz has no common assignment of channel numbers, given no part 15
coverage in the US. AREDN devices show freq in place of a channel
number for 3GHz.
2018-09-10 08:18:32 -07:00
12611d3959
aredn: add notation in Mesh Status to identify tunnel info
2018-09-06 18:19:25 -07:00
ab130956ba
bugfix: aredn signal chart correct SNR to dB units
2018-09-05 20:28:57 -07:00
b5ad5cad23
bugfix: aredn TxMbps does not show on Mikrotik hAP lite in mesh status
2018-09-05 20:14:03 -07:00
d9ce31798c
aredn: Changeed placement of OLSR info on the mesh status page. ( #177 )
...
Moved to be under the Previous Neighbors area.
It's actually under the previous neighbors listing
Fixes #171
2018-09-05 21:15:29 -05:00
8db653302a
bugfix: sysinfo.json not returning chanbw on hapACLite ( #174 )
2018-09-05 09:46:01 -05:00
0bd057ed40
aredn: phase 1 support for Mikrotik rb952Ui-5ac2nD
...
Add support for the hAP lite model rb952UI-5ac2nD equivilent to
the UBNT AirRouter. The 5Ghz interface will be configured in a
2nd phase. This hAP lite model has double the RAM and Flash
of the AR. the 2Ghz is MIMO (5Ghz is single antenna).
2018-09-03 23:26:56 -07:00
ef6d092b2e
aredn: node description, lat/lon display, olsr entries ( #163 )
...
* aredn: node description on mesh page, lat/lon on both status and mesh, olsr entries
Added node description to mesh status page
Fixes #161
Added Lat/Lon (if available) to status and mesh pages.
It is diplayed above the description and under the node name.
Fixes #145
Added OLSR Routing tables entries to status page just under the memory area
Also added this same info just above the buttons on the mesh status page
Fixes #160
* aredn: OLSR routing table entries
Small addition to the displayed info
* aredn: corrections
move lat lon if statement farther up
changed system command lines to have () around them...
* aredn: added comments for new lines
* aredn: more corrections
back to using backticks on system commands per short discussion with ae6xe
* aredn: updated some lines so they will not toss warnings in the syntax tests
2018-08-31 20:39:07 -05:00
4997cb47d2
aredn: Node description enhancement ( #156 )
...
* aredn: Node Description Enhancements
Node Description entry on setup page is now multiline.
Fixes #91
Node Description display on status page is now a table cell,
allowing for background color addition and word-wrapping.
Fixes #90
Description background color added to CSS files with colors appropriate to each theme.
Other CSS additions for the description input field on the setup page.
Updated onboard help file about the node description field (and fixed a typo)
* move some of the character filtering "higher up the chain" in perl.
javascript still will replace any new lines with a space in case the user hit's enter in the description entry box.
tested with curl and I can't find any problems yet.
* removed some commented lines that were not needed
* actually fix the typo I saw in help.html file.
2018-08-26 13:03:26 -05:00
2678e9ad4a
show the SNR above the real time chart ( #143 )
...
* show the SNR above the real time chart
* uncomment chart line that was commented by mistake
* fixes for 3.17
2018-08-23 10:55:50 -05:00
8d3b63a3f3
Add testing support for the PowerBridge M5
2018-08-22 13:05:16 -07:00
5abeb8f7ac
bugfix: aredn slugbug mitigation
...
with low memory conditions, typically on 32Mb RAM, the
device would become unresponsive in hours to days. The
symptoms only occured when no RF links. iw processes
would hang in Zombie state. Updates to use iwinfo where
possible and avoid using both iw and iwinfo. crontab
script is implemented to detect Zombie processes and free
up resources in the reduced chance the symptoms are still
occuring.
2018-08-22 07:23:53 -07:00
af0e26dd84
config change to make uhttpd listen on port 80 and 8080 ( #142 )
...
* config change to make uhttpd listen on port 80 and 8080
* add port 80 to tunnel firewall rules
* add port 80 to tunnel firewall rules in config, update help
* firewall rules for wan + dtdlink
2018-08-20 14:09:47 -05:00
685ef824df
update about.html page content ( #121 )
2018-08-08 14:27:03 -05:00
48c3edf729
aredn: Remove square brackets from description on status page ( #108 )
...
The square brackets look kind of silly, and if the description goes multi line they will look even worse.
2018-08-04 13:46:11 -05:00
683c7b7149
aredn: remove duplicate file and minify
...
I found a duplicated file in www, only 16k, but every bit matters now.
Removed the duplicate and the replaced the file with a minified version.
Updated www/cgi-bin/scan to use new minified file.
Tested. works fine.
2018-08-04 06:42:43 -08:00
560070d2d1
bugfix: node description not saving properly ( #101 )
2018-08-02 15:58:01 -05:00
22e4557821
A simple fix for the apostropocalypse ( #98 )
...
changed some single quotes to escaped double quotes in setup
2018-07-30 23:37:32 -05:00
014217aa6b
ar71xx: Add Support for the TP-LINK CPE210 V3.0 Device
...
This Device is almost the same as the CPE210 V2.0
Once Support for the TP-LINK CPE210 V3.0 gets added to the OpenWrt code we
will need to drop the patch 001-add_support_for_TP-Link_CPE210_v3.patch
2018-07-21 14:33:26 -08:00
30069e5ade
Format code
2018-07-20 20:34:44 -08:00
5c5ed5a8bc
Add Node description to status (and setup) pages ( #79 )
...
Closes #32
* feature: add node description to status page
* feature: add node description to status page
* scrub for html like tags and correct node description label
* cleanup extra whitespace, comments, and debug stmt
2018-07-19 13:28:18 -05:00
282f4a170b
Added the Nodes locally hosted service listing to sysinfo.json ( #78 )
...
* Added the Nodes locally hosted service listing to sysinfo.json
Added the Nodes locally hosted service listing to sysinfo.json file.
* Forgot to change api_version
* Change info[] section to be services_local to keep in line with the function is called
was info[local_services] now info[services_local]
2018-07-18 16:48:31 -05:00
f05c204a96
feature: nodename field on setup page is too small ( #77 )
...
Fixes #76
2018-07-17 14:13:30 -05:00
accca49945
Support 29 host direct mode ( fixes #49 )
2018-07-17 08:53:11 -05:00
d8262e37e7
bugfix: Ensure ip2hostname returns shortname
...
Needed to minimize size of OLSR advertisements and
ensure correctness of links in mesh status page
fixes #66
2018-07-15 09:28:03 -07:00
eae3e42ddd
bugfix: nslookup output parsing changes with openwrt 18.06
...
fixes #66
2018-07-14 23:09:48 -07:00
5ad1a14022
Added Uptime and Load Averages to the sysinfo.json file. ( #61 )
...
* Added Uptime and Load Averages to the sysinfo.json file.
All code copied from Darryl, dman776.
* Updated Api Version number to 1.2.
Updated Api Version Number to 1.2.
2018-07-13 23:44:28 -05:00
506b15286b
bugfix: node cannot detect that it was WAN access. location if 'ip' command is incorrect ( fixes #40 ) ( #41 )
2018-07-11 22:51:22 -05:00
65bba7aa35
feature: add SSID to status page ( resolves #31 ) ( #42 )
2018-07-10 19:06:18 -05:00
41559da318
feature: add channel and bandwidth to status page ( resolves #28 )
2018-07-05 19:23:12 -05:00
0d95d4d708
ar71xx: Add Support for the TP-LINK CPE510 V2.0 Device
...
Once the PR for this is accepted by Openwrt we will need to remove the file
001-add_support_for_TP-Link_CPE510_v2.patch
Removed 001-add_support_for_TP-Link_CPE210_v2.patch as PR #937 has been committed
Updated 99_setup_aredn_include to remove unused Rssi Led configuration
2018-07-04 18:17:14 -07:00
511e450afa
hardware: add definition for Basebox 2
2018-07-01 20:20:26 -05:00
a8d0fbd16c
Change AREDN site URLs, licensing info, and correct typos in AREDN name
2018-06-30 10:32:54 -05:00
8cbc9a1435
hardware: add aredn definition for mikrotik 912uag-5hpnd
...
Mikrotik RouterBOARD 912UAG-5HPnD or BaseBox 5 definition
2018-06-15 17:50:18 -05:00
9fd3f30934
ar71xx: Add Support for the TP-LINK CPE210 V2.0 Device
...
Once Support for the TP-LINK CPE210 V2.0 gets added to the OpenWrt code we will need to drop the patch 001-add_support_for_TP-Link_CPE210_v2.patch
2018-05-15 21:20:44 -07:00
7ee18ed05b
hardware: add tplink cpe510 v1.1 aredn device definition
...
Power settings at or below vendor max specs. Some channels
further limited within driver likely from vender
flash config data settings
2018-05-13 23:11:51 -05:00
3e4e6270b7
feature: add bootloader version to supporttool output ( #8 )
...
* feature: add U-Boot version to supporttool output
* feature: add bootloader version to supporttool output
2018-05-13 23:02:57 -05:00
7f78757bc2
correct issues in files so build test will pass without issue ( #4 )
...
* correct issues in files so build test will pass without issue
* correct issues in files so build test will pass without issue
2018-05-02 19:42:04 -05:00
b7cacc3d18
package: olsr: AREDN upgrade to 0.9.6.2
2018-03-29 21:03:16 -07:00
8c5be0cf0b
hardware: Add definition for 0xe6e5 PBE-M5-400-ISO
...
{{{
board.sysid=0xe6e5
board.cpurevision=0x00001122
board.name=PowerBeam? M5
board.shortname=P5B
board.subtype=400-ISO
board.netmodes=7
board.hwaddr=F09FC24EEF7E
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe6e5
radio.1.subvendorid=0x0777
radio.1.txpower.max=26
radio.1.txpower.min=-4
radio.1.txpower.offset=4
radio.1.ieee_modes=5
radio.1.antennas=2
radio.1.def_antenna=1
radio.1.antenna.1.id=1
radio.1.antenna.1.name=400
radio.1.antenna.1.gain=25
radio.1.antenna.1.builtin=1
radio.1.antenna.1.chains=2
radio.1.antenna.1.chain.1.id=0
radio.1.antenna.1.chain.1.name=Horizontal
radio.1.antenna.1.chain.2.id=1
radio.1.antenna.1.chain.2.name=Vertical
radio.1.antenna.2.id=2
radio.1.antenna.2.name=Feed only
radio.1.antenna.2.gain=3
radio.1.antenna.2.builtin=1
radio.1.antenna.2.chains=2
radio.1.antenna.2.chain.1.id=0
radio.1.antenna.2.chain.1.name=Horizontal
radio.1.antenna.2.chain.2.id=1
radio.1.antenna.2.chain.2.name=Vertical
radio.1.distance_limit_km=0
radio.1.chanbw="5,8,10,20,30,40"
feature.rssi.leds=4
feature.ext_reset=0
}}}
ref AREDN->ticket:253
Change-Id: Iec7080fa73ed0c03402b85daef870f6be45d1d95
2018-02-28 03:40:03 +00:00
f9a74b709d
hardware: Add RM2T 0xe1d2 device config
...
Adds testing support for the Rocket M2 Titanim
{{{
TI.v5.5# cat /etc/board.info
board.sysid=0xe1d2
board.cpurevision=0x00002122
board.name=Rocket M2 Titanium
board.shortname=R2T
board.subtype=
board.netmodes=7
board.hwaddr=DC9FDB061725
board.reboot=30
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=9192
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe1d2
radio.1.subvendorid=0x0777
radio.1.txpower.max=28
radio.1.txpower.offset=10
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=0
}}}
Change-Id: I86308a1f6331eb9edc0366fccd172b93d7be2e08
2018-02-03 10:41:07 -08:00
98b72b5159
hardware: Add testing support for RM5T
...
Adds testing support for the Rocket M5 Titanium
{{{
board.sysid=0xe4d5
board.cpurevision=0x00002122
board.name=Rocket M5 Titanium
board.shortname=R5T
board.subtype=GPS
board.netmodes=7
board.hwaddr=0418D60C3216
board.reboot=40
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
board.gps=1
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe4d5
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.offset=5
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=0
}}}
ref AREDN->ticket:252
Change-Id: I9b1c4bb1fda5bee4ed9efd98ec717a9fcd5baace
2018-02-03 10:23:05 -08:00
69937359c3
bugfix: correct rfband settings for 0xe235 NBM5 model
...
Change-Id: Iae180905820fb5827fefb002662ad3db1c9f5551
2017-12-04 19:12:49 -08:00
d18d14f326
hardware: Add ubnt NSM2 Loco XW 0xe867 device config
...
{{{
board.sysid=0xe867
board.cpurevision=0x00001122
board.name=NanoStation Loco M2
board.shortname=LM2
board.subtype=
board.netmodes=7
board.hwaddr=687251704683
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe867
radio.1.subvendorid=0x0777
radio.1.txpower.max=23
radio.1.txpower.min=-4
radio.1.txpower.offset=2
radio.1.ieee_modes=10
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Built in
radio.1.antenna.1.gain=8
radio.1.antenna.1.builtin=1
radio.1.antenna.1.chains=2
radio.1.antenna.1.chain.1.id=0
radio.1.antenna.1.chain.1.name=Horizontal
radio.1.antenna.1.chain.2.id=1
radio.1.antenna.1.chain.2.name=Vertical
radio.1.distance_limit_km=0
radio.1.chanbw="5,8,10,20,30,40"
feature.rssi.leds=4
feature.ext_reset=0
}}}
ref AREDN->ticket:246
Change-Id: I4248ef878bebc9cf1ee356801c3ac659507af789
2017-10-28 03:59:15 +00:00
3580a9a555
hardware: Add ubnt NSM2 XW 0xe866 device config
...
{{{
board.sysid=0xe866
board.cpurevision=0x00001122
board.name=NanoStation? M2
board.shortname=N2N
board.subtype=
board.netmodes=7
board.hwaddr=687251720121
board.reboot=40
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe866
radio.1.subvendorid=0x0777
radio.1.txpower.max=28
radio.1.txpower.min=-4
radio.1.txpower.offset=6
radio.1.ieee_modes=10
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Built in
radio.1.antenna.1.gain=11
radio.1.antenna.1.builtin=1
radio.1.antenna.1.chains=2
radio.1.antenna.1.chain.1.id=0
radio.1.antenna.1.chain.1.name=Horizontal
radio.1.antenna.1.chain.2.id=1
radio.1.antenna.1.chain.2.name=Vertical
radio.1.distance_limit_km=0
radio.1.chanbw="5,8,10,20,30,40"
feature.rssi.leds=4
feature.ext_reset=0
}}}
ref AREDN->ticket:247
Change-Id: Iefae267d47561fb83d0ca400b8f77155c32d31b2
2017-10-26 19:48:03 -07:00
17b9d5357c
Merge branch 'release-3.17.1.0' into develop.
...
Bring current changes in release to develop to allow
development to continue.
Change-Id: I6c6e44026978ac4f938e687d540d476e5e8a610e
2017-10-01 11:36:00 -07:00
be514ffb5d
bugfix: sysinfo.json not returning all services properly
...
Change-Id: I2b796a9ae03ef979d0776a9c2285354c60fb49f7
2017-09-14 14:22:18 +00:00
d5b06415c2
bugfix: charts realtime default language corrected
...
fixes AREDN->ticket:233
Change-Id: I4ccc1051bf9e008cb320e6eac07f8fa67bc96234
2017-08-30 02:38:37 +00:00
7eeb7164f7
feature: add meminfo to supporttool
...
Change-Id: Id301b511567b14192369744ef3f0b54886191ace
2017-04-29 20:58:15 -05:00
60e2310917
bugfix: Remove references to Status 4 LED
...
AirRouter does not have a Status 4 LED.
The Power LED does similar to the Status 4 on the AirRouter.
Changing the text to be more generic removing reference
to LED's and leave the documentation of how to know
a node has booted to be done elsewhere.
fixes AREDN->ticket:208
Change-Id: I8821f86e89e17d25e4a21abfdd94d989619d081a
2017-04-12 02:32:44 +00:00
a57d5cd08c
bugfix: olsrd-watchdog false reports
...
olsrd-watchdog can trigger when the olsrd service is restarted
Such as when a tunnel comes up, or when a config change is
made to olsrd.
procd already monitors olsrd and makes sure it remains running.
With procd we no longer need olsrd-watchdog and can remove it.
fixes AREDN->ticket:215
Change-Id: I5067d380a22bd0ab5e597746478ef3e1ba05d72d
2017-03-31 19:34:49 +00:00
9c0f5bf7c6
bugfix: DHCP Reservation allows duplicate hostname usage.
...
The DHCP Name reservation on the ports page would allow
a user to use the name of the mesh node as a hostname
for a reserved host which would mess up the remote display
of hosts on the mesh status screen.
In addition while testing the verification code it was found
that it was case sensitive while dns is case insensitive.
fixes AREDN->ticket:198
Change-Id: Ie51a594f733eca38e8547faeab0260d7b23b8818
2017-03-24 18:27:20 +00:00
507ceed577
bugfix: invalid lat/lon values when dragging marker across wrapped boundry
...
refs AREDN->ticket:221
Change-Id: Id60213e72428c86f51b17c9c137785e340bca3eb
2017-03-21 16:31:12 +00:00
8ee8fbefe0
bugfix: Increase available memory during upgrade/install process
...
It is possible for the system to run out of memory when dealing
with large file uploads and installs.
As part of the upgrade procedure shutdown services that are not
essential for node operations to allow more memory for install
to take place.
Includes changes to linkled to indicate this new state as it will
be shutdown as part of the cleanup process.
Memory gain (approximate)
dropbear 100kb
linkled 200kb
logd 200kb
odhcp 100kb
snmpd 500kb
xinetd 100kb
Total(approximate): 1200kb (around %4 on 32mb devices)
This is somewhat similar to files/usr/local/bin/upgrade_kill_prep
except that it kills only a select group of services
so that the system can handle the file upload while
upgrade_kill_prep does the final system cleanup to run the full
upgrade.
ref AREDN->ticket:204
Change-Id: Ic6d3aa028725064a97c4723f6d9b36e1e51d87a7
2017-03-08 03:23:52 +00:00
a2208dbc5a
bugfix: Prevent users from uploading files when tunnels are active.
...
If a user tries to upload a file (especially firmware images) while
a tunnel is active the nodes run a high risk of running out of
available RAM.
Change-Id: I6c31a5c641c7266f337aa4b209367ae0491703ad
2017-03-05 16:57:37 -08:00
24a3243215
Bugfix: read_postdata() accepts files when not expected
...
Correct read_postdata() to only accept files from pages that are
specifically designed to accept files.
This should be limited to authenticated pages only.
SCS-2017-001
Change-Id: Ic40f19a88e543d83a8097abcd4e7254ccea90f49
2017-03-05 02:45:04 +00:00
8e08363414
bugfix: extend admin page reload time after reboot to 3 mins
...
Change-Id: Iffa664bf495fdb20d1d8450e00457722399bfcbf
2017-02-08 03:55:22 +00:00
956c6b7cd8
bugfix: change charts to be time linear
...
Change-Id: I06e0c8d1d5d39e9faa46bfec3442bf2e3071c8ff
2017-02-03 16:34:25 +00:00
ed8939b3da
bugfix: add upgrademode web page
...
This will depend on Change-Id: f7cbcef9aec2fb420bd88cdc6345c5c5bfca78fa
ref AREDN->ticket:204
Change-Id: I4e83dab801a21b9389744af19b4613152a6feb1a
2017-01-22 02:39:20 +00:00
bb0cb625d3
bugfix: add reboot button to admin page to support upgrade_mode recovery
...
ref AREDN->ticket:204
Change-Id: I0274dc9dd0ed02a2461e2ae0c8aaf4917dae4b16
2017-01-20 22:12:43 -06:00
8ddf49ba32
bugfix: OTA Upgrade may mask backup errors.
...
During creation of the backup file some errors may be masked.
While this isn't confirmed to be the cause of any known report it
is possible users have in the past experienced this and we just
couldn't see it.
Change-Id: I12136b7c53aabfb243445170b91c69928206bb1b
2017-01-12 20:32:47 -08:00
a9eefa0032
Make supporttool cleanup after itself.
...
Make supporttool clean up its temporary folder when done
executing.
ref AREDN->ticket:204
ref AREDN->ticket:44
Change-Id: Ibc0bc1205ce8f66d382fad238877c881f2a21e3b
2017-01-12 17:14:19 +00:00
d3a93925e2
bugfix: sysinfo.json errors when tunnel interfaces are installed
...
Change-Id: Ib9b343b47e8147ad61e3d7a98105de467df16b0f
2016-12-30 22:47:56 -06:00
c592f44ab0
Sourcecode license text spelling correction.
...
Inside the source files the word "contained" was mispelled
as "conained"
The website currently lists this correctly as "contained"
This was an error in the intial stamping of the source files in
changeset:5c3ee1d0686c6e6f2907fe4fc393d86d6c5a69b5/aredn_ar71xx
Line is part of "Additional Conditions" permitted by GPLv3.
Line does not impact coders prior to the AREDN setup date
as it was added by the AREDN team.
Change-Id: I3bc09aea548100f35c08aebe8686b8d4808d56d8
Signed-off-by: Conrad Lara - KG6JEI <KG6JEI@amsat.org>
Signed-off-by: Joe Ayers <ae6xe@arrl.net>
Signed-off-by: Darryl Quinn <k5dlq@arrl.net>
Signed-off-by: Trevor Paskett - K7FPV <snoopytjp@gmail.com>
2016-12-30 18:54:05 +00:00
e5ff9ebdfb
feature: Allow supporttool to be run from shell
...
Allows the supporttool to generate support files
when run from the shell for times that it may
be required when the web interface is offline.
Change-Id: I696289ea10c2e5b57f3e93d81ec7004469c4bba0
2016-12-28 04:55:46 +00:00
1e08847db0
change: add chart null on timeout, skip signal 0 in archive.
...
Change-Id: Ia30bfebb3d5df097e69f1fb9e8cb75e8f317e3ff
2016-12-28 04:54:34 +00:00
a39abd3813
bugfix: Typo in comment header for perl scripts
...
This is at the top of the license header.
It prevents the code from being processed but doesn't
actually impact the license terms in any way.
Change-Id: Ic91f2400f9694056b6f06fa43d1074411d6c6262
2016-12-23 16:45:47 -08:00
39ebd6b45e
bugfix: force sysinfo.json mac addresses to uppercase
...
Change-Id: Ib62e758a30b8d68064e76e4a0e61b01c37820f49
2016-12-19 18:36:56 -06:00
f65482a74c
enhancements/clarifications to the help file
...
Change-Id: I16b513360d891938631007b631254b96abd18fc0
2016-12-17 00:54:35 +00:00
37a7b57c0a
feature: add mcs/rate info to snrlog for archive
...
Change-Id: I8caa8a0b8cdef74be646283fa458e89b378e608b
2016-12-12 20:18:27 +00:00
d662e1ce97
update help file with chart info
...
Change-Id: I9c298f9be0efd3ce0ffb2f8acf38cd60cb4f8613
2016-12-11 08:51:39 -06:00
a1e55b3679
migrate sysinfo.json to lua
...
Change-Id: I9b092f496d660185e0db9318700c17e0349c7b81
2016-12-03 20:18:44 +00:00
ffc76619cc
convert signal.json to lua, changed style, add tx/rx rates
...
Change-Id: Id46fc2cd74a39f1a1ec6922ba93154df33b95654
2016-12-03 20:18:35 +00:00
8d137bbfa3
bugfix: uci options are single-quoted in CC
...
fixes AREDN->ticket:203
Change-Id: Ia94e3154d618c2baa7122166bfc3756c762d31c6
2016-12-02 03:08:37 +00:00
50332f76d2
bugfix: NSM5 Loco XW no channel number shown in setup
...
Change-Id: I5e5673767572ca28e5345803cadc4a8c3119cc3c
fixes: AREDN->ticket:202
2016-11-23 14:58:54 +00:00
316f6d6acd
feature: link logo to localnode.local.mesh
...
fixes: AREDN->ticket:187
Change-Id: I69542d33e351f652815d368ff1a04e3447a657eb
2016-11-18 03:52:09 +00:00
bbeabbfec8
hardware: Add PowerBeam M5 XW 0xe3e5 device config
...
{{{
board.sysid=0xe3e5
board.cpurevision=0x00001122
board.name=PowerBeam M5
board.shortname=P5B
board.subtype=300
board.netmodes=7
board.hwaddr=44D9E7CE9D90
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe3e5
radio.1.subvendorid=0x0777
radio.1.txpower.max=26
radio.1.txpower.min=-4
radio.1.txpower.offset=4
radio.1.antennas=2
radio.1.def_antenna=1
radio.1.antenna.1.id=1
radio.1.antenna.1.name=300
radio.1.antenna.1.gain=22
radio.1.antenna.2.id=2
radio.1.antenna.2.name=Feed only
radio.1.antenna.2.gain=3
}}}
ref AREDN->ticket:196
Change-Id: Icefe3df76bf2c19b5385aad4dcd94da5f0321bb3
2016-10-24 19:25:57 +00:00
c5e0d869e8
hardware: Add PowerBeam M5 620 XW 0xe885 device config
...
{{{
board.sysid=0xe885
board.cpurevision=0x00001122
board.name=PowerBeamM5
board.shortname=P5B
board.subtype=620
board.netmodes=7
board.hwaddr=0418D6AE868A
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe885
radio.1.subvendorid=0x0777
radio.1.txpower.max=26
radio.1.txpower.offset=4
radio.1.antennas=2
radio.1.def_antenna=1
radio.1.antenna.1.id=1
radio.1.antenna.1.name=400
radio.1.antenna.1.gain=25
radio.1.antenna.2.id=2
radio.1.antenna.2.name=Feed only
radio.1.antenna.2.gain=3
}}}
ref AREDN->ticket:199
Change-Id: Iaafda611e08ca76507712fbd487b7b05cc254b84
2016-10-24 19:25:39 +00:00
159680c0c9
hardware: Add NanoBeam M5-16 0xe815 device config
...
{{{
board.sysid=0xe815
board.cpurevision=0x00001122
board.name=NanoBeam M5
board.shortname=N5B
board.subtype=16
board.netmodes=7
board.hwaddr=44D9E7DCC91B
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe815
radio.1.subvendorid=0x0777
radio.1.txpower.max=26
radio.1.txpower.min=-4
radio.1.txpower.offset=4
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=16
}}}
ref AREDN->ticket:197
Change-Id: I227accf342ef02395297d2b2f6e37c5aff6f4053
2016-10-23 22:14:06 -05:00
f303bb3341
hardware: Add AirGrid M5 XW 0xe835 device config
...
{{{
board.sysid=0xe835
board.cpurevision=0x00001122
board.name=AirGrid M5
board.shortname=AG5
board.subtype=HP
board.netmodes=7
board.hwaddr=24A43CAE0D77
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe835
radio.1.subvendorid=0x0777
radio.1.txpower.max=25
radio.1.txpower.offset=6
radio.1.antennas=4
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Not specified
radio.1.antenna.1.gain=0
radio.1.antenna.2.id=3
radio.1.antenna.2.name=Feed only
radio.1.antenna.2.gain=3
radio.1.antenna.3.id=1
radio.1.antenna.3.name=11x14
radio.1.antenna.3.gain=23
radio.1.antenna.4.id=2
radio.1.antenna.4.name=17x24
radio.1.antenna.4.gain=28
}}}
ref AREDN->ticket:190
Change-Id: I8d079f6a2c6f0d433d17611b292f04980b0bfc0e
2016-10-11 21:32:45 +00:00
a34a20d7e3
bugfix: hardware PBE-M5-400 change rfband to 5800ubntus
...
fixes AREDN->ticket:188
Change-Id: I3b4a74b71400760474887ea6c7be8979c449ff2e
2016-10-11 03:28:10 +00:00
9ec5e2132d
bugfix: Basic Setup - WAN proto stuck in dhcp mode
...
Change-Id: I3a66a027e71fb97f518795e8cc8172fb7aef86f0
2016-09-24 10:52:39 -07:00
0741cf61fc
bugfix: NanoBeam M5 XW hardware definition.
...
Adjust power levels to reflect what is in the board.info
This was likely a typo when I put the device in the first time.
In addition adjust naming to match Ubiquiti device rename.
{{{
board.sysid=0xe4e5
board.cpurevision=0x00001122
board.name=PowerBeam M5
board.shortname=P5B
board.subtype=400
board.netmodes=7
board.hwaddr=0418D65EEB39
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe4e5
radio.1.subvendorid=0x0777
radio.1.txpower.max=26
radio.1.txpower.offset=4
radio.1.antennas=2
radio.1.def_antenna=1
radio.1.antenna.1.id=1
radio.1.antenna.1.name=400
radio.1.antenna.1.gain=25
radio.1.antenna.2.id=2
radio.1.antenna.2.name=Feed only
radio.1.antenna.2.gain=3
}}}
ref AREDN->ticket:185
Change-Id: I71d2a944b6abb9e30862d7ada7f46b80df2c731c
2016-09-24 08:37:02 -07:00
717b39c2fd
hardware: Add support to obtain boardid from more Ubiquiti devices.
...
Obtain the board ID from the EEPROM on *-m-xw devices.
ref AREDN->ticket:185
ref AREDN->ticket:43
Change-Id: I86247640773a1f6cbd3c4792502d7da4890a46a4
2016-09-24 08:28:31 -07:00
1b65f8a3ad
bugfix: UI allows enabling mesh_gw when wan disabled or nat mode
...
Mesh nodes would need a significant amount of configuration
including some operational checks everytime an interface comes up
to be able to handle this.
The more sane method is to only allow a node to be a mesh_gw when
the WAN port is utilized and the node is in DIRECT mode.
This changes the UI to prevent this setup from being allowed.
fixes AREDN->ticket:184
Change-Id: I1a1289bc914a349149f5842812dbebc0a70442f7
2016-09-20 23:09:03 -07:00
bb83809472
hardware: Testing support for CPE210 v1.1
...
Add board definition for CPE210 v1.1 in testing mode.
{{{
========== iw phy phy0 info ==========
Wiphy phy0
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
max # sched scan SSIDs: 0
max # match sets: 0
Retry short limit: 7
Retry long limit: 4
Coverage class: 9 (up to 4050m)
Device supports AP-side u-APSD.
Device supports T-DLS.
Available Antennas: TX 0x3 RX 0x3
Configured Antennas: TX 0x3 RX 0x3
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* WDS
* monitor
* mesh point
* P2P-client
* P2P-GO
* outside context of a BSS
Band 1:
Capabilities: 0x11ef
RX LDPC
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15
Frequencies:
* 2397 MHz [-2] (30.0 dBm) <-- This is kernel fallback when channel is
* 2402 MHz [-1] (30.0 dBm) <-- not defined in radio EEPROM, set to 22 instead
* 2412 MHz [1] (22.0 dBm)
* 2417 MHz [2] (23.0 dBm)
* 2422 MHz [3] (23.0 dBm)
* 2427 MHz [4] (23.0 dBm)
* 2432 MHz [5] (23.0 dBm)
* 2437 MHz [6] (23.0 dBm)
* 2442 MHz [7] (23.0 dBm)
* 2447 MHz [8] (23.0 dBm)
* 2452 MHz [9] (23.0 dBm)
* 2457 MHz [10] (23.0 dBm)
* 2462 MHz [11] (23.0 dBm)
* 2467 MHz [12] (30.0 dBm) <-- This is also kernel fallback
* 2472 MHz [13] (30.0 dBm) <-- Set to 23 instead as that was was above
* 2484 MHz [14] (30.0 dBm)
valid interface combinations:
* #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS } <= 1,
total <= 2048, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz }
* #{ WDS } <= 2048,
total <= 2048, #channels <= 1, STA/AP BI must match
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
}}}
ref AREDN->ticket:183
Change-Id: I00e52b80ce5f8e8a774c7bae7d946a6dab73bacf
2016-09-18 17:49:46 +00:00
64eb08bdba
bugfix: Help document incorrectly states web login password is encrypted.
...
User UI login uses http-basic authentication which is just base64 encoded
for transit but not encrypted.
This is a long standing error in documentation.
Change-Id: Ib3e49533b2acb32496e5e2a9b9b93e1436bc5f0d
2016-09-13 13:43:18 -07:00
5eb457b11a
enhancement: add services to sysinfo.json api
...
Change-Id: I09769ef110a6210513efc4bc23908be9ac7ddf6a
2016-09-05 19:23:54 +00:00
8bf9d0948d
bugfix: added tunnel network address constraints.
...
fixes AREDN->ticket:180
Change-Id: I054f6d96c378f96c9d454536f2c08e4735bdf746
2016-08-25 03:12:41 +00:00
efd133cbd4
change AREDN upload to only pull /links from OLSR
...
enables support for drawing map links as well.
fixes AREDN->ticket:181
Change-Id: I5b0dd4b99d3892d136021faa4a5bd5856607b2a5
2016-08-24 20:40:47 -05:00
dc17259f4d
enhancement: make snr chart fill more of the screen
...
Change-Id: I31b0cc10bcabe7bff47ac52a4feb1cc39f874cfa
2016-08-19 15:08:55 -05:00
3962465066
feature: Instruct search engines not to index node pages
...
Provide HTTP header to search engines not to index the page.
Eventually we will likely want to add nofollow and a robots file
but first we need to get this pushed out and into search engine hands
so they delist the entires that may already be cached.
Change-Id: I47a68fcc8fb69c43c3f1bbe2b8a04a3e8d51571a
2016-08-16 18:15:06 -07:00
7de59de3b9
bugfix: TxMbps compatibility with Chaos Calmer
...
fixes AREDN->ticket:176
Change-Id: I005b391ecdc3611dc7fc59632743759b04d76728
2016-08-12 15:42:59 +00:00
d4b7617e03
remove non-mesh modes from setup options
...
fixes AREDN->ticket:175
Change-Id: I7517df178a5ce82ef79ec4af844932fe6569d8da
2016-08-07 21:38:18 +00:00
4ada350a4c
add olsr/links to aredn data server push info
...
Change-Id: Iea15ac7f4ea0858702bb3d8eaa06f36135f76eb4
2016-07-12 10:55:43 -05:00
df9c6601be
enable leafletjs, leafletcss, and maptiles to be based on uci config vars
...
fixes AREDN->ticket:174
Change-Id: I0133ab46df95b14d55192e5e47fa4e8f6377b4c9
2016-06-22 08:43:28 -05:00
6bc3999b59
hardware: Rocket M5 with GPS 0xe1c5
...
fixes AREDN->ticket:162
Forum reference: http://www.aredn.org/content/m5-gps
Submitted by KE2N
{{{
board.sysid=0xe1c5
board.cpurevision=0x00000101
board.name=Rocket M5
board.shortname=R5N
board.subtype=GPS
board.netmodes=7
board.hwaddr=00272228652D
board.reboot=50
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
board.gps=1
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe1c5
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.min=-4
radio.1.txpower.offset=5
radio.1.ieee_modes=5
radio.1.antennas=13
radio.1.def_antenna=13
radio.1.antenna.1.id=1
radio.1.antenna.1.name=AMO-5G10
radio.1.antenna.1.gain=10
radio.1.antenna.1.builtin=0
radio.1.antenna.1.chains=2
radio.1.antenna.1.chain.1.id=0
radio.1.antenna.1.chain.1.name=Vertical
radio.1.antenna.1.chain.2.id=1
radio.1.antenna.1.chain.2.name=Horizontal
radio.1.antenna.2.id=2
radio.1.antenna.2.name=AMO-5G13
radio.1.antenna.2.gain=13
radio.1.antenna.2.builtin=0
radio.1.antenna.2.chains=2
radio.1.antenna.2.chain.1.id=0
radio.1.antenna.2.chain.1.name=Vertical
radio.1.antenna.2.chain.2.id=1
radio.1.antenna.2.chain.2.name=Horizontal
radio.1.antenna.3.id=3
radio.1.antenna.3.name=AM-5G16-120
radio.1.antenna.3.gain=16
radio.1.antenna.3.builtin=0
radio.1.antenna.3.chains=2
radio.1.antenna.3.chain.1.id=0
radio.1.antenna.3.chain.1.name=Vertical
radio.1.antenna.3.chain.2.id=1
radio.1.antenna.3.chain.2.name=Horizontal
radio.1.antenna.4.id=4
radio.1.antenna.4.name=AM-5G17-90
radio.1.antenna.4.gain=17
radio.1.antenna.4.builtin=0
radio.1.antenna.4.chains=2
radio.1.antenna.4.chain.1.id=0
radio.1.antenna.4.chain.1.name=Vertical
radio.1.antenna.4.chain.2.id=1
radio.1.antenna.4.chain.2.name=Horizontal
radio.1.antenna.5.id=5
radio.1.antenna.5.name=AM-M-V5G-Ti
radio.1.antenna.5.gain=17
radio.1.antenna.5.builtin=0
radio.1.antenna.5.chains=2
radio.1.antenna.5.chain.1.id=0
radio.1.antenna.5.chain.1.name=Vertical
radio.1.antenna.5.chain.2.id=1
radio.1.antenna.5.chain.2.name=Horizontal
radio.1.antenna.6.id=6
radio.1.antenna.6.name=AM-5G19-120
radio.1.antenna.6.gain=19
radio.1.antenna.6.builtin=0
radio.1.antenna.6.chains=2
radio.1.antenna.6.chain.1.id=0
radio.1.antenna.6.chain.1.name=Vertical
radio.1.antenna.6.chain.2.id=1
radio.1.antenna.6.chain.2.name=Horizontal
radio.1.antenna.7.id=7
radio.1.antenna.7.name=AM-5G20-90
radio.1.antenna.7.gain=20
radio.1.antenna.7.builtin=0
radio.1.antenna.7.chains=2
radio.1.antenna.7.chain.1.id=0
radio.1.antenna.7.chain.1.name=Vertical
radio.1.antenna.7.chain.2.id=1
radio.1.antenna.7.chain.2.name=Horizontal
radio.1.antenna.8.id=8
radio.1.antenna.8.name=AM-V5G-Ti
radio.1.antenna.8.gain=21
radio.1.antenna.8.builtin=0
radio.1.antenna.8.chains=2
radio.1.antenna.8.chain.1.id=0
radio.1.antenna.8.chain.1.name=Vertical
radio.1.antenna.8.chain.2.id=1
radio.1.antenna.8.chain.2.name=Horizontal
radio.1.antenna.9.id=9
radio.1.antenna.9.name=AM-5AC21-60
radio.1.antenna.9.gain=21
radio.1.antenna.9.builtin=0
radio.1.antenna.9.chains=2
radio.1.antenna.9.chain.1.id=0
radio.1.antenna.9.chain.1.name=Vertical
radio.1.antenna.9.chain.2.id=1
radio.1.antenna.9.chain.2.name=Horizontal
radio.1.antenna.10.id=10
radio.1.antenna.10.name=AM-5AC22-45
radio.1.antenna.10.gain=22
radio.1.antenna.10.builtin=0
radio.1.antenna.10.chains=2
radio.1.antenna.10.chain.1.id=0
radio.1.antenna.10.chain.1.name=Vertical
radio.1.antenna.10.chain.2.id=1
radio.1.antenna.10.chain.2.name=Horizontal
radio.1.antenna.11.id=11
radio.1.antenna.11.name=RD-5G-30
radio.1.antenna.11.gain=30
radio.1.antenna.11.builtin=0
radio.1.antenna.11.chains=2
radio.1.antenna.11.chain.1.id=0
radio.1.antenna.11.chain.1.name=Vertical
radio.1.antenna.11.chain.2.id=1
radio.1.antenna.11.chain.2.name=Horizontal
radio.1.antenna.12.id=12
radio.1.antenna.12.name=RD-5G31-AC
radio.1.antenna.12.gain=31
radio.1.antenna.12.builtin=0
radio.1.antenna.12.chains=2
radio.1.antenna.12.chain.1.id=0
radio.1.antenna.12.chain.1.name=Vertical
radio.1.antenna.12.chain.2.id=1
radio.1.antenna.12.chain.2.name=Horizontal
radio.1.antenna.13.id=13
radio.1.antenna.13.name=RD-5G-34
radio.1.antenna.13.gain=34
radio.1.antenna.13.builtin=0
radio.1.antenna.13.chains=2
radio.1.antenna.13.chain.1.id=0
radio.1.antenna.13.chain.1.name=Vertical
radio.1.antenna.13.chain.2.id=1
radio.1.antenna.13.chain.2.name=Horizontal
radio.1.distance_limit_km=0
radio.1.chanbw="5,8,10,20,30,40"
feature.rssi.leds=2
feature.gps=1
feature.gps.leds=3
feature.ext_reset=0
}}}
Change-Id: I6c03799cc04577b873b7ec04038238fb761ec3e7
2016-06-21 16:13:06 -07:00
32a0d6348d
Merge "Merge branch 'ChaosCalmer' into develop" into develop
2016-06-20 05:53:31 +00:00
061ede3488
Merge branch 'ChaosCalmer' into develop
...
Change-Id: I26a8677595a25aae267b7365f1e5835ea68f49b4
2016-06-19 19:26:12 -07:00
39efd11beb
bugfix: could not delete client connections from vpnc page
...
fixes AREDN->ticket:170
Change-Id: Ieacdfd3eebf288e6fc83dcade7903eb96419dff4
2016-06-16 22:37:41 -05:00
d45bbb9dea
fixes AREDN->ticket:172
...
Change-Id: I0db2dbc14283c2458a55b4e75ca25ce95d867b5b
2016-06-14 14:18:52 -05:00
6e2a56b106
fixes AREDN->ticket:163
...
KG6JEI COMMENT:
Origonaly this was commit 027d0e6b6c682cbf264912842fb2fb9ce92084c7
This got lost in the repo migration and has been chery-picked back into the repo.
Change-Id: If02ade8efca0520b23abccdeceb9bf0fc4eb73d1
2016-05-31 23:01:26 -07:00
3bae69cc5c
hardware: add NanoBridge M5 0xe235 in testing
...
XM.v5.5# cat /etc/board.info
board.sysid=0xe235
board.cpurevision=0x000000c2
board.name=NanoBridge? M5
board.shortname=NB5
board.subtype=
board.netmodes=7;
board.hwaddr=00156D1EED1F
board.reboot=30
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=1524
board.phy.2.maxmtu=1524
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe235
radio.1.subvendorid=0x0777
radio.1.txpower.max=23
radio.1.txpower.offset=1
radio.1.antennas=3
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Not specified
radio.1.antenna.1.gain=0
radio.1.antenna.2.id=1
radio.1.antenna.2.name=300
radio.1.antenna.2.gain=22
radio.1.antenna.3.id=2
radio.1.antenna.3.name=400
radio.1.antenna.3.gain=25
fixes AREDN->ticket:161
Change-Id: I050f39646000e4e6ce4342e7140046ba77396d38
2016-05-31 19:56:03 -07:00
1271db794a
Merge 3.16.1.0 as released into develop
...
Merge branch 'release-3.16.1.0' into develop
2016-05-17 09:50:40 -07:00
215e5abf47
fixes AREDN->ticket:166
2016-05-15 17:40:29 -05:00
1adb471d31
hardware: Mark devices as supported for 3.16.1.0
...
Moving devices that have been tested in beta for 3.16.1.0 to supported status
2016-04-20 17:57:08 -07:00
23bc85687c
fixes AREDN->ticket:151
2016-04-08 13:02:35 -05:00
7d437e2cb8
bug fix: run sysupgrade forked off from uhttpd, kill un-necessary processes and flush page cache during firmware upgrade
2016-03-08 20:29:35 -07:00
b4d9a4fc7b
bugfix: Migrate vtund firewall rules to the new firewall system.
...
Resolves issue with firewall rules being purged on a port change.
Requires changeset:dcc9d83e6e4bc3142f18fd077a3f5a955a66ce00/aredn_packages
2016-02-24 21:06:03 -08:00
902371a876
add loading spinner to signal page
2016-02-23 20:52:02 -08:00
aa3f8855c1
fixes AREDN->ticket:151
2016-02-23 10:00:51 -06:00
64f1c941f2
Merge branch 'mesh_mbps' into release-3.16.1.0
2016-02-11 21:18:49 -08:00
0f1c33196b
Bugfix: TxMbps help.html updates to match (rate * ewma) calulation
2016-02-11 21:17:23 -08:00
1419f28749
Merge branch 'mesh_mbps' into release-3.16.1.0
2016-02-10 23:32:42 -08:00
225fabd063
Bugfix: Calculation of TxMbps now (MCS rate * %-packet-success)
...
ThroughPut numbers in rate selection table were not based on
expected definition from Minstrel's docs. Rather, was based
on 1200 byte packets and transmit time included SIFS time
inflating #s.
2016-02-10 23:23:25 -08:00
5b7475f607
Feature: Add 0xe4a2 boardid support for AirRouter (non-HP)
...
XM.v5.5.11# cat /etc/board.info
board.sysid=0xe4a2
board.cpurevision=0x00000101
board.name=AirRouter
board.shortname=LAP
board.subtype=
board.netmodes=15
board.hwaddr=687251405E66
board.reboot=30
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe4a2
radio.1.subvendorid=0x0777
radio.1.txpower.max=20
radio.1.txpower.offset=1
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=0
2016-02-10 20:13:59 -08:00
001496e7dc
bugfix: re-worked wifi distance setting to show all values (miles, KM, meters)
2016-02-04 17:55:57 -06:00
765ca369ea
bugfix: Disable Default Route checkbox was not displayed in NAT mode
2016-01-22 21:10:28 -08:00
602dc13d8a
add loading spinner to signal page
2016-01-22 15:32:33 -07:00
bc04cd9a5a
updated help file with "optionalsettings" information (lat/lon, upload, ntp, etc.)
2016-01-20 01:25:27 -06:00
04c8de37a2
feature: enabled new chart zoom options
2016-01-19 19:58:00 -06:00
c0973f68a9
feature: enabled option to save chart as a JPG or PNG
2016-01-19 19:39:31 -06:00
b870bbce6c
CanvasJS upgraded to 1.8 GA
2016-01-15 17:19:06 -06:00
c34ce710dc
bugfix: always show buttons, added javascript error handling when not internet connected
2016-01-12 20:30:00 -06:00
507dbab626
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into develop
2016-01-12 11:21:12 -07:00
0aca4ce5c7
fix bug with spaces in time zone names
2016-01-12 10:58:06 -07:00
16b06c4554
rearranged the order of buttons in the optional location section
2016-01-12 11:33:25 -06:00
38d2c1fc8b
feature: find me using browser location services
2016-01-11 17:41:35 -06:00
7314a868e5
feature: added button to post data to aredn server including olsrd topology info
2016-01-11 12:46:12 -06:00
de2ba6ec59
feature: Add definition for NS Loco M5 0xe0a5
2016-01-10 18:49:58 -08:00
c21b4f7b35
bugfix: removed Strongest Selection from Archive chart
2016-01-09 20:55:53 -08:00
ad8e3c0605
revert validate_hostname change
2016-01-08 18:05:31 -07:00
44ab46bc87
move new settings to optional area under table, disable ntp server, ntp server fqdn validation
2016-01-08 18:04:25 -07:00
7653acc333
Merge branch 'develop' into ntp
2016-01-08 11:11:13 -07:00
6f97c52565
add time zone and ntp server to setup page
2016-01-08 10:58:22 -07:00
f62a6d43fa
re-inserted antenna message
2016-01-06 14:47:52 -06:00
cb1bd15823
resized distance field, changed is_online technique
2016-01-06 14:36:40 -06:00
c9b2670d99
removed unnecessary comment
2016-01-06 14:25:09 -06:00
779f33e8fc
removed lat/lon/grid from admin page (moved to setup)
2016-01-06 10:46:59 -06:00
d55f6de4cf
bugfix: removed global css border change
2016-01-06 10:46:27 -06:00
4f2d68bc08
feature: added lat/lon/gridsquare fields and map to capture them
2016-01-06 10:23:18 -06:00
07f447313f
default wifi distance to 0, disallow saving with 0 value, change alert to show on 0
2016-01-05 23:09:34 -06:00
1e24cda1f1
change chart back to spline type
2016-01-05 22:12:24 -06:00
2b2ec5c1fd
removed erroneous reference to Broadband-Hamnet from copyright
2016-01-05 22:11:44 -06:00
16b4e8c798
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into develop
...
* 'develop' of ssh://git.aredn.org/aredn_ar71xx:
feature: TxMbps--Added Mesh Status Help Section and minor code enhancements
bugfix: snrlog better handle neighbor references from mac to ip to hostname
hardware: Add testing support for AirRouter HP
2016-01-04 22:42:34 -06:00
a1bc4fa35b
feature: distance value calculation in km or miles
2016-01-04 22:41:27 -06:00
0cf75af9df
feature: TxMbps--Added Mesh Status Help Section and minor code enhancements
2016-01-01 16:08:02 -08:00
cc6d4ee550
hardware: Add testing support for AirRouter HP
...
board.info
{{{
board.sysid=0xe4b2
board.cpurevision=0x00000101
board.name=AirRouter
board.shortname=LAP
board.subtype=HP
board.netmodes=15
board.hwaddr=687251449BBD
board.reboot=50
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe4b2
radio.1.subvendorid=0x0777
radio.1.txpower.max=28
radio.1.txpower.min=-4
radio.1.txpower.offset=9
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=6
}}}
2015-12-28 22:48:13 -08:00
2dfc911df7
Merge branch 'release-3.15.1.0' into develop
...
Conflicts:
files/www/cgi-bin/mesh
2015-12-22 08:45:09 -08:00
91ad5613fe
feature: Add TxMbps to mesh status
2015-12-21 18:26:45 -08:00
9c21a18f3f
bugfix: IP selection dropdown list is empty on dhcp reseveration/ports page.
2015-12-20 18:52:10 -08:00
d6db48fb48
bugfix: Services were not lined up correctly on mesh status page.
...
Correct services to be correctly lined up.
Note:
It looks like we need to split the two tables eventually on the mesh status page as the services are pushed to the right.
Saving this however to be done in a future release as we may be doing a revamp of this page for sortable fields in the near future and this would fit in with that.
2015-12-16 21:42:43 -08:00
9d0b7d59e1
Revert "bugfix: Services were not lined up correctly on mesh status page."
...
This reverts commit b223259f4f
2015-12-16 21:41:19 -08:00
b223259f4f
bugfix: Services were not lined up correctly on mesh status page.
...
Correct services to be correctly lined up.
Note:
It looks like we need to split the two tables eventually on the mesh status page as the services are pushed to the right.
Saving this however to be done in a future release as we may be doing a revamp of this page for sortable fields in the near future and this would fit in with that.
2015-12-16 21:33:16 -08:00
265d2eb196
feature: enhance snrlog to squareLine, local TZ, fix test condition
2015-12-15 22:45:29 -08:00
b2c4913680
default any error conditions to -95
2015-12-13 15:07:46 -06:00
aa6dbe41d6
minor adjustment to interfaces and hosts (change to array)
2015-12-12 17:33:54 -06:00
839718cc89
minor adjustment to interfaces and hosts (change to array)
2015-12-12 17:19:52 -06:00
3685deb091
moved buttons to top of page for consistency with other pages
2015-12-11 17:10:57 -06:00
8586a9fee8
feature: device support for older AirGrid M5 0xe245 tested in beta
2015-12-11 10:50:45 -08:00
4aff5d7a59
fixed typos in device names
2015-12-11 11:15:48 -06:00
2f15569a69
fixed y-axis label
2015-12-11 00:35:37 -06:00
096f798ceb
hardware: Update supported hardware list labels.
2015-12-10 10:53:37 -08:00
fbc6002924
removed spurious comments
2015-12-10 12:15:12 -06:00
61d9db044d
bugfix: location message alignment/html structure issue
2015-12-10 12:14:38 -06:00
fba3459752
bugfix: fix validation to not allow - at the end of the line
2015-12-10 12:12:15 -06:00
1ef42568c2
changed default chart view to realtime
2015-12-10 11:22:30 -06:00
f96fac0a57
removed old SNR page and replace with new chart page
2015-12-10 11:14:43 -06:00
a1deaea04a
bugfix: initialize chart to start at -95 instead of 0
2015-12-09 17:16:44 -06:00
4de822ca2b
signal2 cleanup
2015-12-09 16:57:57 -06:00
dd04d3d657
feature: added realtime charts by device
2015-12-09 16:37:37 -06:00
c81127f2a4
feature: select a device to view archived data against, enabled chart zooming/panning
2015-12-09 15:36:09 -06:00
46c13c8c64
bugfix: add error checking when posting to map server
2015-12-08 17:20:53 -06:00
c270ea5e0d
added data validation for lat/lon/gridsquare
2015-12-08 17:03:15 -06:00
8ceaa87472
bugfix: maxis on grid square field set to 6
2015-12-07 15:51:29 -06:00
fa0e128104
feature: provided lat/lon/gridsquare purge ability
2015-12-07 15:47:12 -06:00
e1d4c82256
bugfix: test/update grid square to message appears when appropriate
2015-12-07 15:41:34 -06:00
24ccfb30bc
feature: save location data from admin page
2015-12-07 15:24:39 -06:00
4d12a6f535
feature: include boardid for Rocket M5 XW
2015-11-25 21:54:36 -08:00
0c776ab932
fix: correct max power setting NS loco XW
2015-11-25 21:23:52 -08:00
dc5df00d46
feature: Add boardid for NS Loco M5 XW
2015-11-25 20:43:27 -08:00
e3962e12e1
feature: add signal2 graphing page to status page as a button
2015-11-24 22:39:27 -06:00
48cb37bd05
Merge branch 'release-3.15.1.0' into develop
...
Merging in latest release-3.15.1.0 changes into develop to provide a foundation with recent release fixes for the develop branch.
This should be 3.15.1.0b03 code.
Conflicts:
files/etc/crontabs/root
files/usr/local/bin/wscan
files/www/cgi-bin/sysinfo.json
2015-11-15 19:28:56 -08:00
5b945229fa
bugfix: add rssi_monitor data and logfiles to download support data
2015-11-03 20:32:36 -08:00
a5492c0807
bugfix: tunnel client not showing errors. allow - in pwd
2015-10-19 22:48:09 -05:00
0669217984
check for 3Ghz band channels and report freq instead
2015-08-28 20:09:33 -05:00
14d7163666
add wifi channel number
2015-08-18 21:39:30 -05:00
28f038edd5
bugfix: Correct section reference 10(e) should be 7(e) when referring to the section that grants the additional terms permission in GPL.
2015-08-03 15:57:42 -07:00
e0c2cbbe5d
feature: add sorttable.js lib to www/js dir
2015-07-30 15:34:13 -05:00
5358f43604
minor fixes
2015-07-30 15:33:22 -05:00
478caec8f7
feature: make service links open in a new window
2015-07-30 12:33:18 -05:00
cfd7aa2a6c
js lib changes
2015-07-28 16:33:20 -05:00
028f140996
added js libs
2015-07-28 16:31:48 -05:00
9b2e95238c
fixed realtime charts
2015-07-28 16:16:01 -05:00
3ae86c67ec
feature: signal charts
2015-07-26 23:09:34 -05:00
ae2bc531b2
hardware: board add: Rocket M5 with USB Port
...
board.info
{{{
board.sysid=0xe105
board.cpurevision=0x000000c2
board.name=Rocket M5
board.shortname=R5N
board.subtype=
board.netmodes=7
board.hwaddr=00156DDC9D53
board.reboot=30
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=1524
board.phy.2.maxmtu=1524
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe105
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.offset=5
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=0
}}}
2015-07-23 21:24:21 -07:00
2755094c9f
Merge branch 'FixupTPLinkPower' into release-3.15.1.0
...
Deals with the fact that TPLink has max powers that differ based on frequency and are programed into the chip lower than what the manufacture states in its datasheet.
We want to make sure we don't fry any boards so we honor what the chip programming is set to.
2015-07-22 23:20:23 -07:00
5f66df447f
add help text and icon for power setting info
2015-07-22 23:16:24 -07:00
f209886f76
add qmark image
...
Part of Freesns Cumulus package
https://www.iconfinder.com/icons/183285/help_mark_question_icon#size=16
Free for commerical use
Created by Yannick Lung, 2013
Web: www.yanlu.de
Twitter: @FreecnsUI or @YanluDE
Facebook: www.facebook.com/FreecnsUI
Mail: freecns@yanlu.de
Google+: Freecns
App.net: Freecns
Version 2.0 known as Freecns Cumulus
LICENSE
You are free to use Freecns for commercial and personal purposes without attribution, however a credit for the work would be appreciated. You may not sell or redistribute the icons themselves as icons. Do not claim creative credit.
2015-07-22 23:00:58 -07:00
912afe3713
added channel bandwidth
2015-07-21 12:19:41 -05:00
108e05088b
bugfix: Add max power level tracking control for per channel power on devices
...
Mainly relates to TP-Link devices which have a roving power level programmed into the hardware.
The datasheets for the hardware may say higher power but the chip has been programmed to not go above these values.
2015-07-20 23:30:49 -07:00
9b30e157bc
bugfix: Set max power for device to TPLink programed "max power"
...
This is the absolute maximum that can be used by the device from TPLink eprom programming.
The value actually goes down on some frequencies.
2015-07-20 21:38:01 -07:00
cb09c22275
feature: changed version element name, added grid square
2015-07-16 19:21:41 -07:00
2a63226ad3
feature: added board_id to output
2015-07-16 19:21:41 -07:00
0cd0db2d0d
feature: add sysinfo.json for programmatic lightweight management interface
2015-07-16 19:21:41 -07:00
683b07c4a3
Merge branch 'wscan' into release-3.15.1.0
2015-07-15 21:12:20 -07:00
0efbd5b2f5
bugfix: wifi scan documentation update for changes made
2015-07-15 21:10:51 -07:00
3c86ff9ec8
feature: changed version element name, added grid square
2015-07-13 20:32:17 -05:00
e8333f76ea
feature: added board_id to output
2015-07-13 11:18:53 -05:00
3c0f3ad144
bugfix: tunnel install not posting to same page
2015-07-12 23:26:09 -05:00
8e1da4766a
feature: add sysinfo.json for programmatic lightweight management interface
2015-07-10 21:51:18 -05:00
3576a2c00b
Merge branch 'RemoveIWINFOCalls' into release-3.15.1.0
...
Move from iwinfo to iw where possible
Discovered while discussing another issue about ssid's
ref AREDN->ticket:132
2015-07-09 21:05:14 -07:00
0fdeb4e7eb
bugfix: extend support tool to capture more info from iw as we now use it more than iwinfo
2015-07-09 21:03:06 -07:00
650d1bca28
bugfix: nodeupgraded needs to be set before taring up the archive
...
ref AREDN->ticket:131
2015-07-09 20:01:32 -07:00
87f655f103
Merge branch 'FixSYSUPGRADEBackups' into release-3.15.1.0
...
ref AREDN->ticket:131
2015-07-09 18:21:35 -07:00
d7be9104d9
bugfix: We need to only pull a small selection of files over through sysupgrade instead of all config files.
...
opkg config can cause issues on OS upgrade among others.
ref AREDN->ticket:131
2015-07-09 09:25:00 -07:00
0359796a33
bugfix: detect tun passwords with only numbers
2015-07-06 23:32:41 -05:00
f96dd0d49d
Merge branch 'release-3.15.1.0' into develop
...
Early merge of 3.15.1.0 into develop due to a large number of code changes in the release branch.
Will merge again in the future when the branch is closed but want to pull in changes now from release.
2015-07-06 11:19:17 -07:00
8eabf6ad00
bugfix: snr setting was setting SignalLevel instead of NoiseLevel
...
ref AREDN->ticket:129
2015-07-02 22:43:01 -07:00
c4c808f98c
Merge branch 'FixupRefDMZLed' into release-3.15.1.0
...
Remove references to DMZ led and replace with "Status 4" led
2015-07-01 23:25:56 -07:00
55ec5d6dc1
bugfix: change ref to DMZ Led to Status 4 led in help.html
2015-07-01 23:25:22 -07:00
8e0943f8e0
bugfix: Pull dtdlink and tunnel from remote connections display.
...
Due to issues we are pulling the showing of tunnels untill we can better detect them.
We are also pulling dtdlink as all AREDN nodes should have dtdlink enabled.
2015-07-01 23:21:51 -07:00
305dbb143e
bugfix: ".local.mesh" being added to already qualified domain names.
...
fixes AREDN->ticket:127
2015-07-01 23:10:13 -07:00
a46bbf27d8
bugfix: sometimes iw doesn't show noise floor
...
Pull from kernel debug instead for now untill we can work around it in iw.
fixes AREDN->ticket:129
2015-07-01 10:05:58 -07:00
13db1b02a2
bugfix: Remove ref to DMZ Led on first node reboot
2015-06-30 08:36:45 -07:00
39729157c6
bugfix: Signal levels do not show up on "new extended" RF Channels
...
Switch to iw over iwinfo because it handles the new channels better.
Partially reverts changeset:808a8d5019fce4a7ca2c027ea7838d43c6d8cad0/aredn_ar71xx
fixes AREDN->ticket:129
2015-06-30 00:05:45 -07:00
9481c21db6
bugfix: fixes AREDN->ticket:128 remote neighbor incorrectly shown as having tunnel
2015-06-21 22:06:40 -07:00
f915225459
bugfix: Add in-testing support for older NanoStation M5 XW boards
...
board.info provided by VE3KMV
{{{
board.sysid=0xe005
board.cpurevision=0x000000c2
board.name=NanoStation M5
board.shortname=N5N
board.subtype=
board.netmodes=7
board.hwaddr=00272232336C
board.reboot=30
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=1524
board.phy.2.maxmtu=1524
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe005
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.offset=5
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=16
}}}
2015-06-21 19:24:43 -07:00
ff43a707c1
cleanup: Make note about automatic antenna selection look better on screen
2015-06-18 21:15:05 -07:00
547069986c
bugfix: Antenna selection handle by kernel: Cleanup errors reported by build tests.
2015-06-18 21:09:10 -07:00
21edf5fa02
bugfix:Let kernel handle antenna selection: Remove antenna name mapping data.
2015-06-18 20:18:03 -07:00
ea9dfc5d1a
bugfix: Let kernel handle antennas:Remove sub functions wifi_validant and wifi_defaultant
2015-06-18 20:15:47 -07:00
ee90c366aa
bugfix: The 'hack' we have been using to set RF chain has been discontinued.
...
Trying to registry over-write the antenna setting has never been a good idea in the first place.
The hardware fully handles antenna selection without forcing it already.
ref AREDN->ticket:120
2015-06-18 18:57:04 -07:00
d1253c0d9d
bugfix: Channel "0" means "Problem" inside the kernel.
...
To overhaul the system to allow "0" would take a significant re-write of kernel code. At this time its best to pull channel '0' as it is not in any clear RF space (channel 1 overlaps it)
ref AREDN->ticket:114
2015-06-18 18:35:41 -07:00
3d7893fd46
Revert "Revert "fixes AREDN->125""
...
This reverts commit d917b5b2ec
2015-06-17 00:40:34 -05:00
d917b5b2ec
Revert "fixes AREDN->125"
...
This reverts commit 7a05f76c93
2015-06-17 00:39:07 -05:00
7a05f76c93
fixes AREDN->125
2015-06-17 00:38:13 -05:00
8619bd379e
bugfix: force node name to upper in config files for tunnel client
2015-06-16 23:13:58 -05:00
02c756a489
Merge branch 'MeshBugfix' into release-3.15.1.0
...
Fixes AREDN->118:Mesh Status links incoorect
2015-06-14 23:09:42 -07:00
4ce0e1e21d
Fixes AREDN->118:Mesh Status links incoorect
2015-06-14 23:06:32 -07:00
807f381a04
bugfix: network and firewall tunnel rules reworked
2015-06-14 23:30:06 -05:00
cc2415faf0
bigfix: active icon not appearing on server
2015-06-14 20:50:54 -05:00
91762973a5
bugfix: tunnel firewall changes
2015-06-11 01:02:55 -05:00
81ac8b7fbe
bugfix: losing network interfaces after node-setup
2015-06-11 00:40:14 -05:00
0472e30333
feature: sortable columns in wifi scan
2015-06-09 23:39:10 -05:00
a2456e4df9
bugfix: made firmware upgrade "keep settings" checked by default
2015-06-02 14:49:49 -05:00
f1df364997
bugfix: mesh stat: previous neig remove mid notation, show double same neigh {rf,dtd}
2015-05-25 10:46:15 -07:00
2e5c239ed5
bugfix: mesh stat added ref to wan gateways, was ommitted alongside dtd & tun.
2015-05-25 09:25:38 -07:00
b314c4539f
bugfix: correctly show primary wifi hostname for all references, etx sort, denote dtd & tun* iface
2015-05-24 22:43:26 -07:00
e25756ffbe
setup: mesh gateway: Better define as an advanced feature.
...
Better define the Mesh Gateway as an advanced feature.
Increase documentation in help about what the feature does.
ref AREDN->ticket:109
2015-05-24 15:37:56 -07:00
af1eaa1107
Merge branch 'CleanupTunnels' into release-3.15.1.0
...
various fixups to improve the quality of bringing tunnel's into mainline code
2015-05-24 15:18:54 -07:00
1f4fa46887
supporttool: Add nodename and tsamp to default filename
...
add nodename and tstamp to default filename to reduce chance of submitting wrong file
timestamp may not always be 'real' time if a node does not have ntp access
2015-05-24 14:17:31 -07:00
23b634e6ac
bugfix: supportool: Sensitive files are being included in the support dump.
...
Add feature to remove files that are sensitive (such as vtun configuration with passwords)
2015-05-24 13:47:16 -07:00
c788d2daff
supporttool: Obtain better diagnostic information
...
Add dmesg
fix olsrd collection to obtain actual information
2015-05-24 13:29:49 -07:00
c7c615a750
bugfix: Missing AREDN Logo and alert banner on tunnel pages
2015-05-24 13:08:19 -07:00
5cc53dec88
tunnels: Set tunnel init.d scripts to be executable
...
Remove the chmod step inside of setup.
Came across one time where this didn't trigger.
In addition this saves us from using additional storage space on the node as a +x creates a duplicate file.
2015-05-24 12:30:23 -07:00
0aaa6b6204
bugfix: tunnels: Tunnel config is deleted by saving changes on node.
...
Make sure we always save a copy of the tunnel config to /etc/config.mesh/ not just when we have an error.
2015-05-24 12:26:25 -07:00
d15668d592
documentation: setup: Deprecation notice for all but mesh mode
...
All node type's except mesh have been deprecated.
In a future release we will remove them (and the associated code) to streamline the project.
It is recommended to use a dedicated purpose driven device for these modes in the future
2015-05-21 11:11:59 -07:00
1b68255c7f
hardware: NanoStation M3: Set NanoStation M3 to "in testing"
...
25dbm max power, with 3dbm offchip amplifier.
ref AREDN->ticket:53
2015-05-21 10:51:58 -07:00
0cf4c912ad
bugfix: setup: wired router: Country invalid error
...
Resolve country invalid error when using wired router mode.
Also resolves a chanbw missing error later as well.
ref AREDN->ticket:108
2015-05-21 10:44:25 -07:00
42ee986cd3
bugfix: Untill user visit status page theme is not set.
...
Move default theme selection to html_header() to solve theme not being set.
2015-05-14 11:36:51 -07:00
d59709d840
bugfix: Theme reverts to no-theme when status page reset button is pressed.
...
A symlink loop occurs because the default theme selector links back to itself.
Removing the value= on the select title entry prevents this.
2015-05-14 10:56:41 -07:00
dff687eed7
Merge branch 'DefaultChannel' into develop
...
Allows nodes to default to a common channel that is in the most common bandplan space for Part 97 usage.
Local cordination is still needed by users to make sure the channel matches the local deployment.
Defaults are as follows:
Band : Channel Freq : Bandwidth
900 : 912MHz : 5MHz
2400 : 1 2412MHz : 20MHz
3400 : 3420MHz : 5MHz
5800 : 149 5745MHz : 5MHz
2.4GHz keeps channel 1 at 20MHz because it is the standard deployment.
All other bands are still 'new' and no standard exist so we are creating one.
5MHz chosen because it better fits the emcomm goal. Smaller width should be stronger allowing for better networks.
Local networks can change as they see fit.
2015-05-13 22:02:08 -07:00
c11eae61e8
feature: default rf channel : Make setup page use mesh defaults on reset or unconfigured
...
When a node is first setup (unconfigured) the rf channel or when user presses reset button the wifi channel and bandwidth will be set to mesh default even if it does not match the current RF channel.
2015-05-13 21:47:15 -07:00
99bd244753
feature: default rf channel: Create new function to return default channel+bw
2015-05-13 20:19:22 -07:00
f33a60819e
bugfix: Status Screen: No word wrap on status screen initial warning text
...
A {{{</nobr>}}} was removed in changeset:9444716fbd923731e453456410b5d54b7be04370/aredn_ar71xx
2015-05-11 21:29:28 -07:00
ea9638e787
bugfix: tunnels: Missing AREDN footer on pages.
...
Add call to page_footer(); to pages
2015-05-10 14:38:03 -07:00
eb20b40eb8
Merge branch 'tunnel_mainline' into develop
2015-05-09 22:04:18 -05:00
370808578b
cleanup: unused vars
2015-05-08 23:26:54 -05:00
27bf54f2dc
Merge branch 'SupportTool' into develop
...
Add new feature for support information to admin interface
Conflicts:
files/etc/httpd.conf
2015-05-08 20:03:22 -07:00
01fa7b5666
feature: supporttool: Add link to admin page
...
Add link to admin page for users to download support data
2015-05-08 20:02:09 -07:00
b3798fecdd
feature: New tool to provide support providers with information about a node
...
support tool will dump a tar file with copy of key files and command outputs to aid in diagnostics of support questions.
2015-05-08 19:52:49 -07:00
18339b7443
Merge branch 'SpectrumTest' into develop
...
Spectrum testing proved to work out well. Merge code into mainline so we can better test with the rest of the hardware.
Also extends ability for 3.4 GHz devices (3.38=3.50)
Adds 5MHz spacing options for 5.8Ghz and allows more channels
Adds -2,-1,0 channel support on 2.4GHz
Conflicts:
files/www/cgi-bin/channelmaps.pm
2015-05-08 16:09:44 -07:00
f9eb33339c
feature: Extend RF channel list to match arednbase.
...
Additional channels have been added to the image, adding them to the GUI as well.
2015-05-08 15:23:02 -07:00
76ffed042f
Merge branch 'tunnel_mainline' into develop
2015-05-07 22:55:58 -05:00
f19d8e33fd
cleanup based on shellcheck tests
2015-05-07 22:55:15 -05:00
c26b5fd992
Merge branch 'tunnel_mainline' into develop
2015-05-07 19:25:14 -05:00
f9f046f111
dynamic integration of tun interfaces with olsrd
2015-05-06 23:46:25 -05:00
5a246f7441
reworked ucifunc.pm
...
added server DNS name field
reworked to use section names in ici
2015-05-06 22:01:28 -05:00
bd3de68231
ar71xx: hardware: NanoBeam-M5-19 Add testing support
...
Add NanoBeam M5 19 in testing support
2015-05-05 16:29:53 -07:00
2af1e3e0c3
ar71xx: Copy get_model to get_boardid and modify to return a boardid
...
When model exiss that has a boardid in EEPROM it will return from there, otherwise it returns the model as chosen by ar71xx
2015-05-05 16:18:24 -07:00
3465b45732
feature: mesh status: Display NLQ
...
Add the NLQ to the remote neighbors display so users can see both directions of the path from the mesh status screen.
ETX is dependent upon both directions of the path.
2015-05-04 09:39:52 -07:00
ece70e2f63
BUGFIX: Mesh Status missing some advertised service links or names
2015-04-29 23:29:25 -07:00
a1ce01044d
feature: Add Disable Default Route checkbox to Lan box
...
Allows users to disable publishing 0.0.0.0/0 (all/internet) route via DHCP.
2015-04-29 23:18:09 -07:00
0be1ee22dc
Update node help to include details about "Disable Default Route" checkbox
2015-04-29 23:11:23 -07:00
cc1f683121
feature: adding support to add tun interfaces dynamically to olsrd
2015-04-29 23:02:29 -07:00
8aa7b84712
bugfix: correct unmatched quote error
2015-04-29 21:33:36 -07:00
defd944fc1
changed graphics: https://www.iconfinder.com/icons/183208/bin_can_garbage_trash_icon#size=20 (Free for commercial use)
2015-04-28 22:37:33 -07:00
5d6ba0c244
fix client options and disconnect graphic
2015-04-26 23:21:42 -05:00
7327c2de51
Merge branch 'develop' into tunnel_mainline
2015-04-23 23:00:00 -05:00
9840db43de
hardware: Add CPE210 in testing support
2015-04-22 11:31:23 -07:00
14ddd34906
Merge branch 'RocketM3' into develop
...
RocketM3 will remain in untested status until we get spectrum report.
ref AREDN->ticket:53
2015-04-22 00:06:43 -07:00
a43ef2827b
feature: improved stop methods for client and server. added IPs to uci config
2015-04-20 23:53:57 -05:00
344992b096
Merge commit '714a3d6f5404bcd650019bd59e92d2cc2bb54164' into develop
2015-04-17 18:50:53 -05:00
7371373235
feature: client and server fixes. calculate IP's for dest/gateway
2015-04-15 17:39:45 -05:00
e80f67f139
bugfix: email link did not contain password value
2015-04-11 22:37:26 -05:00
45e82607f9
bugfix: correcting 0 offset issue when getting list of clients, added copyright notice
2015-04-11 22:33:13 -05:00
ce72e3c9f3
bugfix: changed refresh message to minutes
2015-04-09 17:19:03 -05:00
bd3190a8ff
bugfix: added @ to acceptable password chars
2015-04-09 10:57:57 -05:00
5dd3e19c42
bugfix: disabled vpn debug mode
2015-04-09 10:53:45 -05:00
16538f8a45
bugfix: validate password for only alphanumerics
2015-04-09 10:49:54 -05:00
cf1ddb900b
bugfix: network/start now resets to default, added icons for pages
2015-04-09 10:14:04 -05:00
fcce4039db
bugfix: vpn page now saving clients to ici
2015-04-08 21:17:34 -05:00
ff057d3488
bugfix: change navbar spacing to accomodate tunnels
2015-04-08 19:59:39 -05:00
6ff8986810
retrieve connections via uci
2015-04-08 19:44:41 -05:00
cb3867d0f7
feature: vpn page reads from uci, uci lib updates, aredn.css update
2015-04-08 19:04:43 -05:00
c40a42562f
feature: implement vtundsrv startup script. make 13-vtun vtund aware
2015-04-08 00:15:36 -05:00
82611bb57e
bugfix: NanoStation M5 XW device config was malformed
...
ref AREDN->ticket:43
2015-04-07 22:11:56 -07:00
54210a2d7e
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into tunnel_mainline
2015-04-07 23:09:29 -05:00
853430dbdf
hardware: Add testing support for NanoStation M5 XW
...
ref: AREDN->ticket:43
2015-04-07 20:37:58 -07:00
c0c59a8795
feature: installation of tunnel software via vpn page button
2015-04-07 17:06:57 -05:00
e6d08f5606
merged from develop
2015-04-07 10:36:42 -05:00
928e7e720a
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into dyn_css
2015-04-06 23:20:12 -05:00
f6f3aaef9e
Merge branch 'TPLinkCPE' into develop
2015-04-06 21:14:39 -07:00
0b7eb2876a
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into dyn_css
2015-04-06 23:11:32 -05:00
3ba26cea4c
fix: added .local.mesh to sys upgrade links
2015-04-06 23:08:52 -05:00
f4cb866a8b
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into dyn_css
2015-04-06 23:05:04 -05:00
bb4f43ca4c
feature: auto-refresh after sys upgrade, chg link to codename when sys upgrade
2015-04-06 17:10:06 -05:00
33d490aaa7
cleaned comments regarding linking style.css
2015-04-06 15:38:07 -05:00
714a3d6f54
added symlinked style.css to /www
2015-04-06 15:37:21 -05:00
09af80b17e
check for .css file extension being passed
2015-04-06 14:47:09 -05:00
b8dcc50fb9
changed help text
2015-04-06 09:43:05 -05:00
63bb07b617
hardware: CPE510: Add initial hardware support for TPLink CPE510 in testing
...
Testing mode for CPE510
Offset needs to be looked into, OS reports a max power of 23dbm need to see if this is kernel, or offset related.
Should provide enough details for the board to be registered in the UI
2015-04-05 22:16:24 -07:00
7c152d7c1e
hardware: Expand board_id routine to allow TPLink devices to be obtained
...
When a device does not have a subsystem device ID we will fall back to the board_detect routine.
In the case of a TPLink CPE510 the model will be along the lines of "TP-Link CPE510 v1.0"
In the case of TPLink CPE510 this also includes a hardware version so should the hardware be changed in the future we will be able to key off that as well.
2015-04-05 22:07:47 -07:00
4f18f20495
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into dyn_css
2015-04-05 21:20:04 -05:00
df0bc42208
feature: converted css to use symlinks and multiple files
2015-04-05 21:19:32 -05:00
7c216480a5
Merge branch 'wscan' into develop
2015-04-04 22:01:21 -07:00
6672996cd3
added ability to have multiple css files
2015-04-04 23:49:31 -05:00
61c15f7eeb
added style for wscan nodes
2015-04-04 10:44:45 -05:00
ade8026e32
fixed function calls that were moved to external lib (to save space)
2015-04-02 11:52:46 -05:00
a8d68cd021
fix tunnel UI and style the install button
2015-04-01 17:32:55 -05:00
b074fd6985
consolidated functions to reduce duplication (save space)
2015-04-01 17:26:52 -05:00
eb92e16e68
remove bad character
2015-04-01 17:09:41 -05:00
2461d4acd8
add vpn and vpnc pages to UI menu
2015-04-01 17:09:18 -05:00
ba045c292a
bugfix: channelmaps: 3400 frequency was showing 54**
...
Forgot to change the 5 to a 3 when writing the channelmap
2015-04-01 10:07:30 -07:00
32600d5467
initial deploy
2015-04-01 10:42:53 -05:00
5414cb2f86
bugfix: Correct bandmapping to 3400 for Rocket M3
2015-03-31 23:50:05 -07:00
6c91ec0ab4
Add channels that are within normal 5.8GHz unit range for Rocket M3 usage.
...
M3 is a 5.8GHz unit with a 2GHz offset transverter.
5MHz width is recomended on these channels.
Send to spectrum analysis for verification that output looks clean.
Stepping stone to working on the wider width of the full 3.4GHz band which has more channels but unlike channels 95-100 (added in this commit) the rest are outside the normal 5.8GHz cal range (but are between two cal points so may be fine)
2015-03-31 23:42:22 -07:00
16576d7bde
bugfix: dtdlink is by default on eth0.2 not eth0.1
2015-03-26 16:47:33 -07:00
0d11af70b9
bugfix: Unknown interfaces wouldn't return default interface.
2015-03-26 01:31:50 -07:00
9444716fbd
feature: Add function and code to UI code to prepare for changing interface names in the core OS.
...
Create get_interface which will lookup in the current uci network config the realname for the logical interface name.
When the interface is not found it will fall back to a hard coded list.
Configure the UI to use the new get_interface function.
2015-03-24 23:25:18 -07:00
5db6e2a747
Merge branch 'hotfix-3.0.2' into develop
...
Conflicts:
files/www/cgi-bin/admin
2015-03-13 20:56:46 -07:00
0b04c442dd
bugfix: Remove references to WRT54*'s
2015-03-11 16:40:31 -07:00
c4a29903fb
bugfix: Make AREDN(TM) Logo visible in "night" mode
2015-03-09 21:35:24 -07:00
39a7ab878b
bugfix: Cleanup display of rebraned pages.
...
Add missing AREDN(TM) Logo and fix other pages that were missing the footer text.
2015-03-09 19:28:59 -07:00
e146193b65
Rerand from BBHN to AREDN(TM)
...
Since a large number of the BBHNDev team has decided to create firmware fully independent of the BBHN Project the decision has been made to rebrand the firmware to differentiate from the origional BBHN work.
We would like to thank all those whom have worked on the BBHN firmware over the years and all those who continue to work on the firmware under AREDN(TM).
2015-03-09 16:39:04 -07:00
633c83f7f7
Merge branch 'hotfix-3.0.1' into develop
2015-02-04 08:16:30 -08:00
dc24e1d05d
Merge branch 'MakeLinksFQ' into develop
2015-01-25 21:08:16 -08:00
243d5fc714
bugfix: Set hidden flag on dtdlink host names so they do not show up in the "Remote Nodes" list.
2015-01-25 10:56:23 -08:00
7c22853a17
Change OLSR Status button to use node FQDN
2015-01-23 18:30:39 -08:00
a2944c7e30
Configure status page to present FQDN's as long as the link does not contain a period.
2015-01-23 18:25:25 -08:00
5c3ee1d068
bugfix: Add GPLv3 license text to core BBHN Mesh files
...
Program went GPLv3 last year but license text was never added to files
Default text to give credit to David as he is listed in all commits and to reference the BBHN Austin team at the same time as they were part of the group of HAM's that started this project.
2015-01-18 11:36:49 -08:00
f52513aa15
bugfix: Update url for admin downloads
...
Previous URL may not have latest firmware list.
2014-12-14 22:56:45 -08:00
917573cf95
hardware:bugfix: AirGrid M2 0x212 remove power offset to facilitate testing
...
Removing the offset and increasing max power so we have full range avaliable to us.
This may not help us figure out the offset but will allow us a wider range of options.
ref BBHN->ticket:71
2014-12-14 10:54:05 -08:00
b7dcfdd9ce
hardware 🆕 Add testing support for AirGrid M2 0xe212
...
Reported information and board information do not appear to line up, device will need further testing to verify actual details.
Max Power and Power Offset are of concern.
ref BBHN->ticket:71
2014-12-14 10:37:48 -08:00
1ed509132f
bugfix: dhcp lease dropdown lists too many addresses.
...
fixes BBHN->ticket:69
2014-12-12 00:08:31 -08:00
c1de09455e
Merge branch 'release-3.0.0' into develop
2014-11-25 10:25:47 -08:00
4daf0e4f7e
Merge branch 'sysupgradekeepsettings' into develop
2014-11-12 21:29:05 -08:00
cccf5a2ad7
feature: Add the ability to upgrade in place and keep settings.
...
By checking the "Keep Settings" box the node will run sysupgrade instead of mtd. Core settings are stored between installs and the _setup files are updated by pulling in missing items from the _setup.default files.
2014-11-12 21:25:41 -08:00
d5af5c97cf
support status: Mark Rocket M9 as supported.
2014-11-03 20:26:47 -08:00
5a39316a7e
hardware: support: Loco M9, NanoBridge M9 test: RocketM9
...
tag NanoStation Loco M9 and NanoBridge M9 into supported status
begin testing Rocket M9 support
ref BBHN->ticket:66
fixes BBHN->ticket:51
2014-10-20 19:45:46 -07:00
ed4b583277
Due to the following commits we need to increase the protocol version to V3
...
changeset:0e845a1743d3693fd5e1257f38b704c864f52220/bbhn_ar71xx
changeset:8417274fc4233bf0002c721d836e4fa5953f3db1/bbhn_ar71xx
2014-09-11 23:16:27 -07:00
6da1ad8b4e
feature: Change SSID format to include rf channel bandwidth and protocol version
...
From now on all node SSID's will be NAME-<rf bandwidth>-v<protocol version>
tag: RequiresProtocolIncrement
2014-09-11 21:29:54 -07:00
c6e4aa3903
bugfix: DHCP Lease limit is down by one from what it should be.
...
ref BBHN->ticket:57
2014-07-24 21:58:20 -07:00
422e40c5ea
Merge branch 'initialm9devices' into develop
2014-07-14 23:02:03 -07:00
32a67e1b2c
Add initial testing support for M9 devices
...
ref BBHN->ticket:51
2014-07-14 23:01:16 -07:00
711dbc17f2
Add a channel bandwidth selector to the setup screen.
...
Required for 900mhz devices to be supported due to band size.
This can also be useful for allowing more devices to fit into the same amount of RF space as nodes may often not need full 20mhz wide channels.
2.4ghz while using standard BBHN SSID is restricted to 20mhz for compatibility.
ref BBHN->ticket:50
2014-07-14 20:40:49 -07:00
88d532a3a1
bugfix: get_default_gw needs to follow the route the node will use to internet.
...
because of previous bugfix the function needs to check table 31 and 254 (with 254 taking priority)
2014-07-08 00:02:47 -07:00
3e0ec32fca
workaround: For some reason piping yes to opkg never returns when called from perl
...
Has been seen with yes, and echo y, etc. Loops do not return.
In order to allow packages that do not need interaction to install we have pulled out 'yes' for now.
2014-06-26 21:29:39 -07:00
2a8692d5a0
Update list of tested devices.
...
Officaly now supporting (XM series only for all the below):
{{{
Rocket M5
Bullet M5
AirGrid M5
NanoBridge M2
AirGrid M2
AirGrid M5 HP
NanoBridge M5
Bullet M2 Titanium
Bullet M5 Titanium
PicoStation M2
NanoStation M5
NanoStation Loco M5
}}}
2014-06-24 21:05:13 -07:00
25ad0fcadc
bugfix: Links on status page use midX domains which are not resolveable on host they reference.
...
mid hostname entries are only created on remote nodes and are not created on the local node (by design of nameservice module)
In order to allow links on remote nodes olsr status screens and potentionaly other locations to resolve correctly we must add a hostname for the dtdlink interface into the name service beacons.
In addtion we need to ensure the UI looks at these links instead.
This feature will need to be looked at for long in the mesh status screen to find a better method to display these connections.
ref BBHN->ticket:47
2014-06-23 19:42:20 -07:00
62721ea9fa
bugfix: Channel detection for untested devices.
2014-05-09 22:40:11 -07:00
d6bb48154a
Resolve issue related to returning the offset used by iwinfo
2014-05-06 14:29:19 -07:00
570901df25
Disable debugging in status cgi script
2014-05-04 14:37:28 -07:00
e549afa190
Only subtract poweroffset when the value given by iwinfo has an offset applied
2014-05-04 14:28:03 -07:00
207c0f738f
Adjust usage of wifi_txpoweroffset() to handle the fact that offset may be set already in iwinfo so we need to read that value first.
...
Made adjustmetns to code that calls wifi_txpoweroffset() to ensure we minimize the number of calls that spawn a shell.
Also adjust the setting of $wifi_txpower to handle the fact that iwinfo returns the known offset.
2014-05-02 12:07:19 -07:00
808a8d5019
Initial changes to work with OpenWRT 12.09
...
Mostly relates to iwinfo being the new command to obtain info about devices.
iwlist does not exist in 12.09
2014-05-01 20:32:40 -07:00
0541234e1e
Assign 2.4ghz devices to 2400 band.
...
Fixup bug in channel mapping (leading 0 in channel number doesn't work)
ref BBHN->ticket:29
2014-04-19 23:51:55 -07:00
f83bebe58a
Add testing support for PicoStation2 PicoStation2 HP and AirGrid M2 HP (0xe242)
...
ref BBHN->ticket:40 and BBHN->ticket:41
2014-04-18 20:10:43 -07:00
c61d58e172
Add initial support for a monitor interface to be used for SSID based identification.
...
ref BBHN->ticket:28
2014-04-18 08:53:54 -07:00
a93d48e849
Fix wifi being disabled after applying setting on non-chain devices
...
fixes BBHN->ticket:39
2014-04-18 08:30:50 -07:00
2afedf6f65
Add support for selecting RF country in the user interface.
...
NOTE: This patch requires a kernel upgrade to fully work.
Adds new value wifi_country.
Country HX is being chosen for HAM band use.
Country selection is needed to help the device stay withing regulatory domain for worldwide use.
ref BBHN->ticket:29
2014-04-17 21:47:04 -07:00
06febced7f
Add testing support for Bullet M5 TI
...
see BBHN->ticket:29
2014-04-12 09:48:06 -07:00
7a0de5a6a9
Add line in changeset:bbhn_ar71xx/a4dd9a9bdd798b05d76d71d135d860f57cb83d8d
...
Add support for dtdlink_* variables
2014-04-08 23:28:29 -07:00
a4dd9a9bdd
Add new feature device-to-device linking (dtdlink)
...
The dtdlink interface is vlan 2 on eth0 and is used for linking two or more devices together.
This will allow for band-to-band repeaters, sector antenna setups, etc.
see BBHN->ticket:28
2014-04-08 23:19:45 -07:00
ede5b0656d
Better validation of services advertisements entries
...
fixes BBHN->ticket:35
2014-04-01 15:30:55 -07:00
e34b7fcee4
Fix issue where the active SSID does not timeout in iwlist so networks show up after they have disappeared.
...
fixes BBHN->ticket:30
2014-03-31 22:59:47 -07:00
c6a3e7a64e
Add testing support for multiple 2.4ghz Ubiquiti devices
...
see BBHN->ticket:31, BBHN->ticket:32, BBHN->ticket:36, BBHN->ticket:38
2014-03-27 23:19:13 -07:00
3b215c40c0
Initial code for 5GHZ (and other band) devices.
...
Includes band/channel mapping
Code to set default RF channel on first boot
Add many 5ghz Ubiquiti devices in a testing phase including:
NanoBeam M5 (Intl), NanoBridge M5, AirGrid M5 HP, AirGrid M5, NanoStation M5, NanoStation Loco M5, Bullet M5, Rocket M5
see BBHN->ticket:29
2014-03-27 22:53:06 -07:00
f6d81b25c2
Add support for devices that are 'in testing' to the banner display.
...
In testing devices should be listed with a -2 status
2014-03-26 21:47:54 -07:00
2f126f4fa0
Prepwork for dealing with the common encrypted ports.
...
In order to maintain compatibility with existing deployed nodes, known common encrypted ports will NOT be blocked by default.
Users will receive a message during first setup encouraging them to review the rules that apply to how they intend to use their node and that laws very by country and frequency.
A package blockknownencrypted has been created in changeset:123a521df2b63ba1c5bdd6ad94ac402b86394579/bbhn_packages to be used in blocking known encrypted ports if the user feels it is necessary.
As developers we are not stating an opinion as to what the rules say or do not say in relationship to the traffic this deals with. Each user will need to make their own determination of the rules.
This has been the current case since day one.
New file fwinfo page shows if the package is installed AND displays the active firewall rules at the time of the access. This allows future grown to help test (because of the adhoc nature of the mesh) if packet filtering is the cause of a connection not working.
see BBHN->ticket:3
2014-01-28 13:05:58 -08:00
bb245bffbe
Adjust paths used for update routines to match future home on the BBHN website.
2014-01-28 12:32:47 -08:00
ca0603c82d
Fix package list generation routine
...
Between Kamikaze and Backfire the opkg list output has changed.
Package description can run over multiple lins with a space indent.
2014-01-25 22:55:25 -08:00
035c33ded4
Fix "apply" button saves chain and distance.
...
Button should only apply the change, not save it.
Save routine works fine already just need to remove the save commands from the apply box.
fixes BBHN->ticket:23
2014-01-25 22:47:30 -08:00
e1c28ab634
Decrease maxpower NanoStation Loco M2
...
Failed to put in changeset:16b4c2a/bbhn_ar71xx to correct for the increased txpower
2014-01-19 18:50:17 -08:00
532605354c
Set tested devices to supported
...
airGrid M2, NanoStation M2, NanoStation Loco M2 are now officaly supported
fixes BBHN->ticket:12, BBHN->ticket:25
ref BBHN->ticket:11
2014-01-19 18:44:01 -08:00
16b4c2a201
Increae txoffset for NanoStation Loco M2
...
Based on testing airOS claims NSLM2's have a 2db amplifier it appears that they may actually have a 5db amp.
Since units keep reporting 3db lower than we expect them to we are increasing the txpower offset until we have confirmed power tests.
fixes BBHN->ticket:11, BBHN->ticket:22
2014-01-19 18:38:26 -08:00
fc1d9fbc02
hardware_info fixups NanoStation M2 NanoStation Loco M2 and default chains
...
Set default of using chains as more devices being presened rely on chains than those who don't.
Fixed the default antenna and chain support on NanoStataton M2 and NanoStation Loco M2
2014-01-14 10:33:38 -08:00
cef893bf59
NanoStation M2 should use chains
...
see BBHN->ticket:25
2014-01-12 23:05:50 -08:00
72a4882a09
Add testing support for NanoStation M2
...
28dbm after the final with a 10db amplifier. Uses chains.
see BBHN->ticket:25
2014-01-10 20:15:38 -08:00
e6d5ce7559
Add extra details on NanoBridge M3
2014-01-09 10:51:00 -08:00
dd8f3568e7
Set power after selecting antenna and chain settings.
...
Min and Max power are affected by what chains are set on the device so we should set the power after selecting the antenna.
2014-01-04 09:58:45 -08:00
ccb83c6a91
fix olsrd-config not putting in ip to name mapping
...
nslookup has changed between upstream Linksys build and our Backfire based UBNT build.
fixes BBHN->ticket:21
2013-12-31 12:38:17 -08:00
b0b04d23d8
Model Name correction on Bullet M2 HP
2013-12-16 10:56:36 -08:00
1f49e57e54
Add testing support for ariGrid M2 HP
...
airGrid M2 HP -- 28dbm output power device with a 9dbm offset.
see BBHN->ticket:12
2013-12-15 13:09:11 -08:00
3c4eee4f0f
Add testing support for NanoStation Loco M2
...
Added NanoStation Loco M2
board.sysid=0xe0a2
radio.1.txpower.max=23
radio.1.txpower.offset=2
radio.1.antennas=1
Chains are not 100% guranteed to be accurate.
Belive from http://community.ubnt.com/t5/airOS-Software-Configuration/chain-0-1/td-p/140354
that Chain0 is Vertical Chain1 Horizontal when mounted vertically
Chain Mask is pulled from the Rocket M mask as this is the only sample
we have in the database.
see BBHN->ticket:11
2013-12-13 22:15:40 -08:00
7a28c18bfd
Refactor code for better hardware managment
...
Refactor to create a central hash matrix that provides details on
devices.
The if else else else tree was going to get very messy based on
the realization that each device has custom attributes and the
need to provide diffrent settings for each unit.
Allows easier managment long term.
2013-12-13 21:59:34 -08:00
6974527e88
Add device compatibility checker with alert text
...
fixes BBHN->ticket:1
Units will show:
Yellow banner for devices we have not yet tested.
Red banner for devices we have confirmed do not work.
Relies on what Ubiquiti calls the board.sysid which is the
value of subsystem_device on the first PCI device.
2013-12-11 22:54:27 -08:00
abfcc77b24
Switch to using UCI not nvram on sysinfo page
...
We don't use NVRAM any more so need to change the script to call
uci instead.
Only listing the local config folder that holds hsmmmesh.settings
2013-12-10 20:16:19 -08:00
8425998355
Adjust RF Power for Bullet M's
...
Bullet M2 has a maxpower of 28dbm. Unit has a 12db amplifier
closes #5
2013-12-08 16:11:50 -08:00
b948d97423
Merge SDWG Mesh progress with 1.0.0 BBHN
...
Includes removing files that are provided by packages instead
of being embedded as binaries.
Changes made for UBNT hardware AND for newer base openwrt (Backfire)
2013-12-02 12:04:54 -08:00
ae2674e764
import of files/ from BBHN 1.0.0 (bbhn svn 273)
2013-11-15 06:11:16 +00:00
Raymond Suelzer