Commit Graph

24 Commits

Author SHA1 Message Date
Conrad Lara - KG6JEI 06febced7f Add testing support for Bullet M5 TI
see BBHN->ticket:29
2014-04-12 09:48:06 -07:00
Conrad Lara - KG6JEI 7a0de5a6a9 Add line in changeset:bbhn_ar71xx/a4dd9a9bdd798b05d76d71d135d860f57cb83d8d
Add support for dtdlink_* variables
2014-04-08 23:28:29 -07:00
Conrad Lara - KG6JEI a4dd9a9bdd Add new feature device-to-device linking (dtdlink)
The dtdlink interface is vlan 2 on eth0 and is used for linking two or more devices together.

This will allow for band-to-band repeaters, sector antenna setups, etc.

see BBHN->ticket:28
2014-04-08 23:19:45 -07:00
Conrad Lara - KG6JEI ede5b0656d Better validation of services advertisements entries
fixes BBHN->ticket:35
2014-04-01 15:30:55 -07:00
Conrad Lara - KG6JEI e34b7fcee4 Fix issue where the active SSID does not timeout in iwlist so networks show up after they have disappeared.
fixes BBHN->ticket:30
2014-03-31 22:59:47 -07:00
Conrad Lara - KG6JEI c6a3e7a64e Add testing support for multiple 2.4ghz Ubiquiti devices
see BBHN->ticket:31, BBHN->ticket:32, BBHN->ticket:36, BBHN->ticket:38
2014-03-27 23:19:13 -07:00
Conrad Lara - KG6JEI 3b215c40c0 Initial code for 5GHZ (and other band) devices.
Includes band/channel mapping
Code to set default RF channel on first boot

Add many 5ghz Ubiquiti devices in a testing phase including:
NanoBeam M5 (Intl), NanoBridge M5, AirGrid M5 HP, AirGrid M5, NanoStation M5, NanoStation Loco M5, Bullet M5, Rocket M5

see BBHN->ticket:29
2014-03-27 22:53:06 -07:00
Conrad Lara - KG6JEI f6d81b25c2 Add support for devices that are 'in testing' to the banner display.
In testing devices should be listed with a -2 status
2014-03-26 21:47:54 -07:00
Conrad Lara - KG6JEI e1c28ab634 Decrease maxpower NanoStation Loco M2
Failed to put in changeset:16b4c2a/bbhn_ar71xx to correct for the increased txpower
2014-01-19 18:50:17 -08:00
Conrad Lara - KG6JEI 532605354c Set tested devices to supported
airGrid M2, NanoStation M2, NanoStation Loco M2 are now officaly supported

fixes BBHN->ticket:12, BBHN->ticket:25

ref BBHN->ticket:11
2014-01-19 18:44:01 -08:00
Conrad Lara - KG6JEI 16b4c2a201 Increae txoffset for NanoStation Loco M2
Based on testing  airOS claims NSLM2's have a 2db amplifier it appears that they may actually have a 5db amp.

Since units keep reporting 3db lower than we expect them to we are increasing the txpower offset until we have confirmed power tests.

fixes BBHN->ticket:11, BBHN->ticket:22
2014-01-19 18:38:26 -08:00
Conrad Lara - KG6JEI fc1d9fbc02 hardware_info fixups NanoStation M2 NanoStation Loco M2 and default chains
Set default of using chains as more devices being presened rely on chains than those who don't.

Fixed the default antenna and chain support on NanoStataton M2 and NanoStation Loco M2
2014-01-14 10:33:38 -08:00
Conrad Lara - KG6JEI cef893bf59 NanoStation M2 should use chains
see BBHN->ticket:25
2014-01-12 23:05:50 -08:00
Conrad Lara - KG6JEI 72a4882a09 Add testing support for NanoStation M2
28dbm after the final with a 10db amplifier. Uses chains.

see BBHN->ticket:25
2014-01-10 20:15:38 -08:00
Conrad Lara - KG6JEI e6d5ce7559 Add extra details on NanoBridge M3 2014-01-09 10:51:00 -08:00
Conrad Lara - KG6JEI ccb83c6a91 fix olsrd-config not putting in ip to name mapping
nslookup has changed between upstream Linksys build and our Backfire based UBNT build.

fixes BBHN->ticket:21
2013-12-31 12:38:17 -08:00
Conrad Lara - KG6JEI b0b04d23d8 Model Name correction on Bullet M2 HP 2013-12-16 10:56:36 -08:00
Conrad Lara - KG6JEI 1f49e57e54 Add testing support for ariGrid M2 HP
airGrid M2 HP -- 28dbm output power device with a 9dbm offset.

see BBHN->ticket:12
2013-12-15 13:09:11 -08:00
Conrad Lara - KG6JEI 3c4eee4f0f Add testing support for NanoStation Loco M2
Added NanoStation Loco M2
board.sysid=0xe0a2
radio.1.txpower.max=23
radio.1.txpower.offset=2
radio.1.antennas=1

Chains are not 100% guranteed to be accurate.

Belive from http://community.ubnt.com/t5/airOS-Software-Configuration/chain-0-1/td-p/140354
that Chain0 is Vertical Chain1 Horizontal when mounted vertically

Chain Mask is pulled from the Rocket M mask as this is the only sample
we have in the database.

see BBHN->ticket:11
2013-12-13 22:15:40 -08:00
Conrad Lara - KG6JEI 7a28c18bfd Refactor code for better hardware managment
Refactor to create a central hash matrix that provides details on
devices.

The if else else else tree was going to get very messy based on
the realization that each device has custom attributes and the
need to provide diffrent settings for each unit.

Allows easier managment long term.
2013-12-13 21:59:34 -08:00
Conrad Lara - KG6JEI 6974527e88 Add device compatibility checker with alert text
fixes BBHN->ticket:1

Units will show:

Yellow banner for devices we have not yet tested.
Red banner for devices we have confirmed do not work.

Relies on what Ubiquiti calls the board.sysid which is the
value of subsystem_device on the first PCI device.
2013-12-11 22:54:27 -08:00
Conrad Lara - KG6JEI 8425998355 Adjust RF Power for Bullet M's
Bullet M2 has a maxpower of 28dbm.  Unit has a 12db amplifier

closes #5
2013-12-08 16:11:50 -08:00
Conrad Lara - KG6JEI b948d97423 Merge SDWG Mesh progress with 1.0.0 BBHN
Includes removing files that are provided by packages instead
of being embedded as binaries.

Changes made for UBNT hardware AND for newer base openwrt (Backfire)
2013-12-02 12:04:54 -08:00
Conrad Lara - KG6JEI ae2674e764 import of files/ from BBHN 1.0.0 (bbhn svn 273) 2013-11-15 06:11:16 +00:00