dman776
7f78757bc2
correct issues in files so build test will pass without issue ( #4 )
...
* correct issues in files so build test will pass without issue
* correct issues in files so build test will pass without issue
2018-05-02 19:42:04 -05:00
Andrew Cameron
770fe43e23
aredn: upgrade setup_aredn_include to new generate_led
2018-03-29 23:55:55 -07:00
Andrew Cameron
1fc7a926ab
bugfix: fix scripts to current standards
...
local can only be used in a function
2018-03-29 22:00:19 -07:00
Joe AE6XE
b7cacc3d18
package: olsr: AREDN upgrade to 0.9.6.2
2018-03-29 21:03:16 -07:00
Joe AE6XE
8c5be0cf0b
hardware: Add definition for 0xe6e5 PBE-M5-400-ISO
...
{{{
board.sysid=0xe6e5
board.cpurevision=0x00001122
board.name=PowerBeam? M5
board.shortname=P5B
board.subtype=400-ISO
board.netmodes=7
board.hwaddr=F09FC24EEF7E
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe6e5
radio.1.subvendorid=0x0777
radio.1.txpower.max=26
radio.1.txpower.min=-4
radio.1.txpower.offset=4
radio.1.ieee_modes=5
radio.1.antennas=2
radio.1.def_antenna=1
radio.1.antenna.1.id=1
radio.1.antenna.1.name=400
radio.1.antenna.1.gain=25
radio.1.antenna.1.builtin=1
radio.1.antenna.1.chains=2
radio.1.antenna.1.chain.1.id=0
radio.1.antenna.1.chain.1.name=Horizontal
radio.1.antenna.1.chain.2.id=1
radio.1.antenna.1.chain.2.name=Vertical
radio.1.antenna.2.id=2
radio.1.antenna.2.name=Feed only
radio.1.antenna.2.gain=3
radio.1.antenna.2.builtin=1
radio.1.antenna.2.chains=2
radio.1.antenna.2.chain.1.id=0
radio.1.antenna.2.chain.1.name=Horizontal
radio.1.antenna.2.chain.2.id=1
radio.1.antenna.2.chain.2.name=Vertical
radio.1.distance_limit_km=0
radio.1.chanbw="5,8,10,20,30,40"
feature.rssi.leds=4
feature.ext_reset=0
}}}
ref AREDN->ticket:253
Change-Id: Iec7080fa73ed0c03402b85daef870f6be45d1d95
2018-02-28 03:40:03 +00:00
Joe AE6XE
f9a74b709d
hardware: Add RM2T 0xe1d2 device config
...
Adds testing support for the Rocket M2 Titanim
{{{
TI.v5.5# cat /etc/board.info
board.sysid=0xe1d2
board.cpurevision=0x00002122
board.name=Rocket M2 Titanium
board.shortname=R2T
board.subtype=
board.netmodes=7
board.hwaddr=DC9FDB061725
board.reboot=30
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=9192
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe1d2
radio.1.subvendorid=0x0777
radio.1.txpower.max=28
radio.1.txpower.offset=10
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=0
}}}
Change-Id: I86308a1f6331eb9edc0366fccd172b93d7be2e08
2018-02-03 10:41:07 -08:00
Conrad Lara - KG6JEI
98b72b5159
hardware: Add testing support for RM5T
...
Adds testing support for the Rocket M5 Titanium
{{{
board.sysid=0xe4d5
board.cpurevision=0x00002122
board.name=Rocket M5 Titanium
board.shortname=R5T
board.subtype=GPS
board.netmodes=7
board.hwaddr=0418D60C3216
board.reboot=40
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
board.gps=1
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe4d5
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.offset=5
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=0
}}}
ref AREDN->ticket:252
Change-Id: I9b1c4bb1fda5bee4ed9efd98ec717a9fcd5baace
2018-02-03 10:23:05 -08:00
Joe AE6XE
69937359c3
bugfix: correct rfband settings for 0xe235 NBM5 model
...
Change-Id: Iae180905820fb5827fefb002662ad3db1c9f5551
2017-12-04 19:12:49 -08:00
Joe AE6XE
d18d14f326
hardware: Add ubnt NSM2 Loco XW 0xe867 device config
...
{{{
board.sysid=0xe867
board.cpurevision=0x00001122
board.name=NanoStation Loco M2
board.shortname=LM2
board.subtype=
board.netmodes=7
board.hwaddr=687251704683
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe867
radio.1.subvendorid=0x0777
radio.1.txpower.max=23
radio.1.txpower.min=-4
radio.1.txpower.offset=2
radio.1.ieee_modes=10
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Built in
radio.1.antenna.1.gain=8
radio.1.antenna.1.builtin=1
radio.1.antenna.1.chains=2
radio.1.antenna.1.chain.1.id=0
radio.1.antenna.1.chain.1.name=Horizontal
radio.1.antenna.1.chain.2.id=1
radio.1.antenna.1.chain.2.name=Vertical
radio.1.distance_limit_km=0
radio.1.chanbw="5,8,10,20,30,40"
feature.rssi.leds=4
feature.ext_reset=0
}}}
ref AREDN->ticket:246
Change-Id: I4248ef878bebc9cf1ee356801c3ac659507af789
2017-10-28 03:59:15 +00:00
Joe AE6XE
3580a9a555
hardware: Add ubnt NSM2 XW 0xe866 device config
...
{{{
board.sysid=0xe866
board.cpurevision=0x00001122
board.name=NanoStation? M2
board.shortname=N2N
board.subtype=
board.netmodes=7
board.hwaddr=687251720121
board.reboot=40
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe866
radio.1.subvendorid=0x0777
radio.1.txpower.max=28
radio.1.txpower.min=-4
radio.1.txpower.offset=6
radio.1.ieee_modes=10
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Built in
radio.1.antenna.1.gain=11
radio.1.antenna.1.builtin=1
radio.1.antenna.1.chains=2
radio.1.antenna.1.chain.1.id=0
radio.1.antenna.1.chain.1.name=Horizontal
radio.1.antenna.1.chain.2.id=1
radio.1.antenna.1.chain.2.name=Vertical
radio.1.distance_limit_km=0
radio.1.chanbw="5,8,10,20,30,40"
feature.rssi.leds=4
feature.ext_reset=0
}}}
ref AREDN->ticket:247
Change-Id: Iefae267d47561fb83d0ca400b8f77155c32d31b2
2017-10-26 19:48:03 -07:00
Conrad Lara - KG6JEI
17b9d5357c
Merge branch 'release-3.17.1.0' into develop.
...
Bring current changes in release to develop to allow
development to continue.
Change-Id: I6c6e44026978ac4f938e687d540d476e5e8a610e
2017-10-01 11:36:00 -07:00
Darryl Quinn
be514ffb5d
bugfix: sysinfo.json not returning all services properly
...
Change-Id: I2b796a9ae03ef979d0776a9c2285354c60fb49f7
2017-09-14 14:22:18 +00:00
Darryl Quinn
d5b06415c2
bugfix: charts realtime default language corrected
...
fixes AREDN->ticket:233
Change-Id: I4ccc1051bf9e008cb320e6eac07f8fa67bc96234
2017-08-30 02:38:37 +00:00
Darryl Quinn
7eeb7164f7
feature: add meminfo to supporttool
...
Change-Id: Id301b511567b14192369744ef3f0b54886191ace
2017-04-29 20:58:15 -05:00
Darryl Quinn
f532ee6a40
bugfix: tun_client connection does not persist/retry
...
refs AREDN->ticket:229
Change-Id: I843bd2eb7c6d88ec4917e52cfc5bbdfaeda9f4c0
2017-04-26 12:06:24 -05:00
Conrad Lara - KG6JEI
e5fc675cfc
bugfix: OTA Upgrade fails with static WAN.
...
Wan interface settings are not correctly copied
over after an OTA causing node-setup to fail
when using a static WAN ip.
fixes->AREDN🎫 226
Change-Id: I494c05bc0047f1db4c1452cbdbd8e236f4fcd945
2017-04-20 12:41:09 -07:00
Conrad Lara - KG6JEI
60e2310917
bugfix: Remove references to Status 4 LED
...
AirRouter does not have a Status 4 LED.
The Power LED does similar to the Status 4 on the AirRouter.
Changing the text to be more generic removing reference
to LED's and leave the documentation of how to know
a node has booted to be done elsewhere.
fixes AREDN->ticket:208
Change-Id: I8821f86e89e17d25e4a21abfdd94d989619d081a
2017-04-12 02:32:44 +00:00
Conrad Lara - KG6JEI
835d7e021c
bugfix: Upgrades of packages leaves node in upgrade mode.
...
Due to the removal of odhcpd in
I0897be587cd1f46da758dda3efe65aea32c8a965
uploadctlservices no longer returns successfully.
Remove odhcpd to allow to return correctly.
Change-Id: I8e4bc2ff5846b793e31ce5ffedfba91806df7ed1
2017-04-11 19:26:28 -07:00
Conrad Lara - KG6JEI
2415c56c3e
bugfix: sysupgrade needs more tmpfs space.
...
Increase space on tmpfs just before launching sysupgrade
when the device has had tmpfs limited to 6.5mb
Change-Id: I5b27e6812017c4cbe5d9cb3f53cb04d09892edf4
2017-04-04 23:31:50 -07:00
Darryl Quinn
7d8496282b
bugfix: remove unnecessary packages in order to reduce memory footprint
...
Change-Id: I0897be587cd1f46da758dda3efe65aea32c8a965
2017-04-04 03:11:46 +00:00
Conrad Lara - KG6JEI
a57d5cd08c
bugfix: olsrd-watchdog false reports
...
olsrd-watchdog can trigger when the olsrd service is restarted
Such as when a tunnel comes up, or when a config change is
made to olsrd.
procd already monitors olsrd and makes sure it remains running.
With procd we no longer need olsrd-watchdog and can remove it.
fixes AREDN->ticket:215
Change-Id: I5067d380a22bd0ab5e597746478ef3e1ba05d72d
2017-03-31 19:34:49 +00:00
Conrad Lara - KG6JEI
9c0f5bf7c6
bugfix: DHCP Reservation allows duplicate hostname usage.
...
The DHCP Name reservation on the ports page would allow
a user to use the name of the mesh node as a hostname
for a reserved host which would mess up the remote display
of hosts on the mesh status screen.
In addition while testing the verification code it was found
that it was case sensitive while dns is case insensitive.
fixes AREDN->ticket:198
Change-Id: Ie51a594f733eca38e8547faeab0260d7b23b8818
2017-03-24 18:27:20 +00:00
Darryl Quinn
507ceed577
bugfix: invalid lat/lon values when dragging marker across wrapped boundry
...
refs AREDN->ticket:221
Change-Id: Id60213e72428c86f51b17c9c137785e340bca3eb
2017-03-21 16:31:12 +00:00
Conrad Lara - KG6JEI
8ee8fbefe0
bugfix: Increase available memory during upgrade/install process
...
It is possible for the system to run out of memory when dealing
with large file uploads and installs.
As part of the upgrade procedure shutdown services that are not
essential for node operations to allow more memory for install
to take place.
Includes changes to linkled to indicate this new state as it will
be shutdown as part of the cleanup process.
Memory gain (approximate)
dropbear 100kb
linkled 200kb
logd 200kb
odhcp 100kb
snmpd 500kb
xinetd 100kb
Total(approximate): 1200kb (around %4 on 32mb devices)
This is somewhat similar to files/usr/local/bin/upgrade_kill_prep
except that it kills only a select group of services
so that the system can handle the file upload while
upgrade_kill_prep does the final system cleanup to run the full
upgrade.
ref AREDN->ticket:204
Change-Id: Ic6d3aa028725064a97c4723f6d9b36e1e51d87a7
2017-03-08 03:23:52 +00:00
Conrad Lara - KG6JEI
a2208dbc5a
bugfix: Prevent users from uploading files when tunnels are active.
...
If a user tries to upload a file (especially firmware images) while
a tunnel is active the nodes run a high risk of running out of
available RAM.
Change-Id: I6c31a5c641c7266f337aa4b209367ae0491703ad
2017-03-05 16:57:37 -08:00
Conrad Lara - KG6JEI
24a3243215
Bugfix: read_postdata() accepts files when not expected
...
Correct read_postdata() to only accept files from pages that are
specifically designed to accept files.
This should be limited to authenticated pages only.
SCS-2017-001
Change-Id: Ic40f19a88e543d83a8097abcd4e7254ccea90f49
2017-03-05 02:45:04 +00:00
Darryl Quinn
8e08363414
bugfix: extend admin page reload time after reboot to 3 mins
...
Change-Id: Iffa664bf495fdb20d1d8450e00457722399bfcbf
2017-02-08 03:55:22 +00:00
Darryl Quinn
956c6b7cd8
bugfix: change charts to be time linear
...
Change-Id: I06e0c8d1d5d39e9faa46bfec3442bf2e3071c8ff
2017-02-03 16:34:25 +00:00
Darryl Quinn
ed8939b3da
bugfix: add upgrademode web page
...
This will depend on Change-Id: f7cbcef9aec2fb420bd88cdc6345c5c5bfca78fa
ref AREDN->ticket:204
Change-Id: I4e83dab801a21b9389744af19b4613152a6feb1a
2017-01-22 02:39:20 +00:00
Darryl Quinn
bb0cb625d3
bugfix: add reboot button to admin page to support upgrade_mode recovery
...
ref AREDN->ticket:204
Change-Id: I0274dc9dd0ed02a2461e2ae0c8aaf4917dae4b16
2017-01-20 22:12:43 -06:00
Conrad Lara - KG6JEI
8ddf49ba32
bugfix: OTA Upgrade may mask backup errors.
...
During creation of the backup file some errors may be masked.
While this isn't confirmed to be the cause of any known report it
is possible users have in the past experienced this and we just
couldn't see it.
Change-Id: I12136b7c53aabfb243445170b91c69928206bb1b
2017-01-12 20:32:47 -08:00
Conrad Lara - KG6JEI
a9eefa0032
Make supporttool cleanup after itself.
...
Make supporttool clean up its temporary folder when done
executing.
ref AREDN->ticket:204
ref AREDN->ticket:44
Change-Id: Ibc0bc1205ce8f66d382fad238877c881f2a21e3b
2017-01-12 17:14:19 +00:00
Darryl Quinn
d3a93925e2
bugfix: sysinfo.json errors when tunnel interfaces are installed
...
Change-Id: Ib9b343b47e8147ad61e3d7a98105de467df16b0f
2016-12-30 22:47:56 -06:00
Conrad Lara - KG6JEI
c592f44ab0
Sourcecode license text spelling correction.
...
Inside the source files the word "contained" was mispelled
as "conained"
The website currently lists this correctly as "contained"
This was an error in the intial stamping of the source files in
changeset:5c3ee1d0686c6e6f2907fe4fc393d86d6c5a69b5/aredn_ar71xx
Line is part of "Additional Conditions" permitted by GPLv3.
Line does not impact coders prior to the AREDN setup date
as it was added by the AREDN team.
Change-Id: I3bc09aea548100f35c08aebe8686b8d4808d56d8
Signed-off-by: Conrad Lara - KG6JEI <KG6JEI@amsat.org>
Signed-off-by: Joe Ayers <ae6xe@arrl.net>
Signed-off-by: Darryl Quinn <k5dlq@arrl.net>
Signed-off-by: Trevor Paskett - K7FPV <snoopytjp@gmail.com>
2016-12-30 18:54:05 +00:00
Conrad Lara - KG6JEI
e5ff9ebdfb
feature: Allow supporttool to be run from shell
...
Allows the supporttool to generate support files
when run from the shell for times that it may
be required when the web interface is offline.
Change-Id: I696289ea10c2e5b57f3e93d81ec7004469c4bba0
2016-12-28 04:55:46 +00:00
Darryl Quinn
1e08847db0
change: add chart null on timeout, skip signal 0 in archive.
...
Change-Id: Ia30bfebb3d5df097e69f1fb9e8cb75e8f317e3ff
2016-12-28 04:54:34 +00:00
Conrad Lara - KG6JEI
a39abd3813
bugfix: Typo in comment header for perl scripts
...
This is at the top of the license header.
It prevents the code from being processed but doesn't
actually impact the license terms in any way.
Change-Id: Ic91f2400f9694056b6f06fa43d1074411d6c6262
2016-12-23 16:45:47 -08:00
Conrad Lara - KG6JEI
db2046092f
bugfix: Make get_model return model of device instead of board type
...
Fixes the fact that get_model has done the same as other functions.
This probably always should of been a real model of active device
not just of the hardware type from the begining.
DEV NOTE:
This is in perl, even though we intended to migrate to LUA the
core library that contains this data has yet to be migrated
so we need to add this as a perl program.
Change-Id: Ib8a4ea6dd881c32e6d7660607576aeb5218b1e7a
2016-12-23 19:30:15 +00:00
Darryl Quinn
39ebd6b45e
bugfix: force sysinfo.json mac addresses to uppercase
...
Change-Id: Ib62e758a30b8d68064e76e4a0e61b01c37820f49
2016-12-19 18:36:56 -06:00
Darryl Quinn
f65482a74c
enhancements/clarifications to the help file
...
Change-Id: I16b513360d891938631007b631254b96abd18fc0
2016-12-17 00:54:35 +00:00
Conrad Lara - KG6JEI
905995eb23
feature: Automate banner file creation Patch 1 of 2
...
Remove banner from the files set as it will override the build
version of the banner.
Patch 2 will be in arednbase repo.
Change-Id: Iefb8288985b39b8942419f43925d00aaab53d610
2016-12-16 22:47:46 +00:00
Darryl Quinn
b9c77fa551
change: snrlog to keep logs longer after signal loss
...
Change-Id: Ifab054fcc2bd1578789dbe61f1ae300cce4c2ccd
2016-12-14 14:18:37 -06:00
Darryl Quinn
37a7b57c0a
feature: add mcs/rate info to snrlog for archive
...
Change-Id: I8caa8a0b8cdef74be646283fa458e89b378e608b
2016-12-12 20:18:27 +00:00
Conrad Lara - KG6JEI
27ea95209e
bugfix: Have UI keep timezone after OTA
...
After OTA upgrade the timezone was kept in the system file
but not in the UI so when a user would save the timezone
would be overwritten.
fixes AREDN->ticket:186
Change-Id: I593afab0c3f67ba9d300228e9cbb47d7e3d894d1
2016-12-12 08:39:35 +00:00
Darryl Quinn
d662e1ce97
update help file with chart info
...
Change-Id: I9c298f9be0efd3ce0ffb2f8acf38cd60cb4f8613
2016-12-11 08:51:39 -06:00
Darryl Quinn
a1e55b3679
migrate sysinfo.json to lua
...
Change-Id: I9b092f496d660185e0db9318700c17e0349c7b81
2016-12-03 20:18:44 +00:00
Darryl Quinn
ffc76619cc
convert signal.json to lua, changed style, add tx/rx rates
...
Change-Id: Id46fc2cd74a39f1a1ec6922ba93154df33b95654
2016-12-03 20:18:35 +00:00
Darryl Quinn
a1da9c0ad7
migrate snrlog to lua
...
Change-Id: Icecf72e370c5e938d8d689a858d57094fe847e45
2016-12-03 20:18:24 +00:00
Darryl Quinn
8d137bbfa3
bugfix: uci options are single-quoted in CC
...
fixes AREDN->ticket:203
Change-Id: Ia94e3154d618c2baa7122166bfc3756c762d31c6
2016-12-02 03:08:37 +00:00
AE6XE
50332f76d2
bugfix: NSM5 Loco XW no channel number shown in setup
...
Change-Id: I5e5673767572ca28e5345803cadc4a8c3119cc3c
fixes: AREDN->ticket:202
2016-11-23 14:58:54 +00:00
Conrad Lara - KG6JEI
811f52f93b
bugfix: SSID handling in system tools.
...
Corrects flaws in how the web user interface displays SSID's
picked up by wifi scanning.
In addition remove the defunct (never supported) connect program
since we never use it (no more client mode) and it could have
issues with correctly passing SSID's from the shell.
Change-Id: I0444c1b3226b9bc5c3d3044fd5c9849a0d2bf67d
2016-11-22 22:06:57 +00:00
Darryl Quinn
316f6d6acd
feature: link logo to localnode.local.mesh
...
fixes: AREDN->ticket:187
Change-Id: I69542d33e351f652815d368ff1a04e3447a657eb
2016-11-18 03:52:09 +00:00
Darryl Quinn
25dc984988
security: protect wifi scan page
...
fixes AREDN->ticket:195
Change-Id: I30f8087aa59483cdbf73cfde8029ccc7bbd42cb5
2016-11-17 14:50:10 -05:00
Darryl Quinn
bbeabbfec8
hardware: Add PowerBeam M5 XW 0xe3e5 device config
...
{{{
board.sysid=0xe3e5
board.cpurevision=0x00001122
board.name=PowerBeam M5
board.shortname=P5B
board.subtype=300
board.netmodes=7
board.hwaddr=44D9E7CE9D90
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe3e5
radio.1.subvendorid=0x0777
radio.1.txpower.max=26
radio.1.txpower.min=-4
radio.1.txpower.offset=4
radio.1.antennas=2
radio.1.def_antenna=1
radio.1.antenna.1.id=1
radio.1.antenna.1.name=300
radio.1.antenna.1.gain=22
radio.1.antenna.2.id=2
radio.1.antenna.2.name=Feed only
radio.1.antenna.2.gain=3
}}}
ref AREDN->ticket:196
Change-Id: Icefe3df76bf2c19b5385aad4dcd94da5f0321bb3
2016-10-24 19:25:57 +00:00
AE6XE
c5e0d869e8
hardware: Add PowerBeam M5 620 XW 0xe885 device config
...
{{{
board.sysid=0xe885
board.cpurevision=0x00001122
board.name=PowerBeamM5
board.shortname=P5B
board.subtype=620
board.netmodes=7
board.hwaddr=0418D6AE868A
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe885
radio.1.subvendorid=0x0777
radio.1.txpower.max=26
radio.1.txpower.offset=4
radio.1.antennas=2
radio.1.def_antenna=1
radio.1.antenna.1.id=1
radio.1.antenna.1.name=400
radio.1.antenna.1.gain=25
radio.1.antenna.2.id=2
radio.1.antenna.2.name=Feed only
radio.1.antenna.2.gain=3
}}}
ref AREDN->ticket:199
Change-Id: Iaafda611e08ca76507712fbd487b7b05cc254b84
2016-10-24 19:25:39 +00:00
Darryl Quinn
159680c0c9
hardware: Add NanoBeam M5-16 0xe815 device config
...
{{{
board.sysid=0xe815
board.cpurevision=0x00001122
board.name=NanoBeam M5
board.shortname=N5B
board.subtype=16
board.netmodes=7
board.hwaddr=44D9E7DCC91B
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe815
radio.1.subvendorid=0x0777
radio.1.txpower.max=26
radio.1.txpower.min=-4
radio.1.txpower.offset=4
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=16
}}}
ref AREDN->ticket:197
Change-Id: I227accf342ef02395297d2b2f6e37c5aff6f4053
2016-10-23 22:14:06 -05:00
AE6XE
f303bb3341
hardware: Add AirGrid M5 XW 0xe835 device config
...
{{{
board.sysid=0xe835
board.cpurevision=0x00001122
board.name=AirGrid M5
board.shortname=AG5
board.subtype=HP
board.netmodes=7
board.hwaddr=24A43CAE0D77
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe835
radio.1.subvendorid=0x0777
radio.1.txpower.max=25
radio.1.txpower.offset=6
radio.1.antennas=4
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Not specified
radio.1.antenna.1.gain=0
radio.1.antenna.2.id=3
radio.1.antenna.2.name=Feed only
radio.1.antenna.2.gain=3
radio.1.antenna.3.id=1
radio.1.antenna.3.name=11x14
radio.1.antenna.3.gain=23
radio.1.antenna.4.id=2
radio.1.antenna.4.name=17x24
radio.1.antenna.4.gain=28
}}}
ref AREDN->ticket:190
Change-Id: I8d079f6a2c6f0d433d17611b292f04980b0bfc0e
2016-10-11 21:32:45 +00:00
AE6XE
a34a20d7e3
bugfix: hardware PBE-M5-400 change rfband to 5800ubntus
...
fixes AREDN->ticket:188
Change-Id: I3b4a74b71400760474887ea6c7be8979c449ff2e
2016-10-11 03:28:10 +00:00
AE6XE
b2edc2472b
bugfix: Add support to obtain boardid from more Ubiquiti devices
...
Change-Id: I60ad4d23339c4aaf59b429c49fa705dbbe49ba8e
2016-09-30 20:41:33 -07:00
AE6XE
9ec5e2132d
bugfix: Basic Setup - WAN proto stuck in dhcp mode
...
Change-Id: I3a66a027e71fb97f518795e8cc8172fb7aef86f0
2016-09-24 10:52:39 -07:00
Conrad Lara - KG6JEI
0741cf61fc
bugfix: NanoBeam M5 XW hardware definition.
...
Adjust power levels to reflect what is in the board.info
This was likely a typo when I put the device in the first time.
In addition adjust naming to match Ubiquiti device rename.
{{{
board.sysid=0xe4e5
board.cpurevision=0x00001122
board.name=PowerBeam M5
board.shortname=P5B
board.subtype=400
board.netmodes=7
board.hwaddr=0418D65EEB39
board.reboot=40
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=ahb
radio.1.subsystemid=0xe4e5
radio.1.subvendorid=0x0777
radio.1.txpower.max=26
radio.1.txpower.offset=4
radio.1.antennas=2
radio.1.def_antenna=1
radio.1.antenna.1.id=1
radio.1.antenna.1.name=400
radio.1.antenna.1.gain=25
radio.1.antenna.2.id=2
radio.1.antenna.2.name=Feed only
radio.1.antenna.2.gain=3
}}}
ref AREDN->ticket:185
Change-Id: I71d2a944b6abb9e30862d7ada7f46b80df2c731c
2016-09-24 08:37:02 -07:00
Conrad Lara - KG6JEI
717b39c2fd
hardware: Add support to obtain boardid from more Ubiquiti devices.
...
Obtain the board ID from the EEPROM on *-m-xw devices.
ref AREDN->ticket:185
ref AREDN->ticket:43
Change-Id: I86247640773a1f6cbd3c4792502d7da4890a46a4
2016-09-24 08:28:31 -07:00
Conrad Lara - KG6JEI
1b65f8a3ad
bugfix: UI allows enabling mesh_gw when wan disabled or nat mode
...
Mesh nodes would need a significant amount of configuration
including some operational checks everytime an interface comes up
to be able to handle this.
The more sane method is to only allow a node to be a mesh_gw when
the WAN port is utilized and the node is in DIRECT mode.
This changes the UI to prevent this setup from being allowed.
fixes AREDN->ticket:184
Change-Id: I1a1289bc914a349149f5842812dbebc0a70442f7
2016-09-20 23:09:03 -07:00
Conrad Lara - KG6JEI
bb83809472
hardware: Testing support for CPE210 v1.1
...
Add board definition for CPE210 v1.1 in testing mode.
{{{
========== iw phy phy0 info ==========
Wiphy phy0
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
max # sched scan SSIDs: 0
max # match sets: 0
Retry short limit: 7
Retry long limit: 4
Coverage class: 9 (up to 4050m)
Device supports AP-side u-APSD.
Device supports T-DLS.
Available Antennas: TX 0x3 RX 0x3
Configured Antennas: TX 0x3 RX 0x3
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* WDS
* monitor
* mesh point
* P2P-client
* P2P-GO
* outside context of a BSS
Band 1:
Capabilities: 0x11ef
RX LDPC
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15
Frequencies:
* 2397 MHz [-2] (30.0 dBm) <-- This is kernel fallback when channel is
* 2402 MHz [-1] (30.0 dBm) <-- not defined in radio EEPROM, set to 22 instead
* 2412 MHz [1] (22.0 dBm)
* 2417 MHz [2] (23.0 dBm)
* 2422 MHz [3] (23.0 dBm)
* 2427 MHz [4] (23.0 dBm)
* 2432 MHz [5] (23.0 dBm)
* 2437 MHz [6] (23.0 dBm)
* 2442 MHz [7] (23.0 dBm)
* 2447 MHz [8] (23.0 dBm)
* 2452 MHz [9] (23.0 dBm)
* 2457 MHz [10] (23.0 dBm)
* 2462 MHz [11] (23.0 dBm)
* 2467 MHz [12] (30.0 dBm) <-- This is also kernel fallback
* 2472 MHz [13] (30.0 dBm) <-- Set to 23 instead as that was was above
* 2484 MHz [14] (30.0 dBm)
valid interface combinations:
* #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS } <= 1,
total <= 2048, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz }
* #{ WDS } <= 2048,
total <= 2048, #channels <= 1, STA/AP BI must match
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
}}}
ref AREDN->ticket:183
Change-Id: I00e52b80ce5f8e8a774c7bae7d946a6dab73bacf
2016-09-18 17:49:46 +00:00
Conrad Lara - KG6JEI
64eb08bdba
bugfix: Help document incorrectly states web login password is encrypted.
...
User UI login uses http-basic authentication which is just base64 encoded
for transit but not encrypted.
This is a long standing error in documentation.
Change-Id: Ib3e49533b2acb32496e5e2a9b9b93e1436bc5f0d
2016-09-13 13:43:18 -07:00
Darryl Quinn
3457b040d8
add initial AREDN lua libraries
...
Change-Id: Id99b64bf603fdff48c6f527a1493311e9ed3f19e
2016-09-07 02:26:55 +00:00
Darryl Quinn
5eb457b11a
enhancement: add services to sysinfo.json api
...
Change-Id: I09769ef110a6210513efc4bc23908be9ac7ddf6a
2016-09-05 19:23:54 +00:00
Darryl Quinn
8bf9d0948d
bugfix: added tunnel network address constraints.
...
fixes AREDN->ticket:180
Change-Id: I054f6d96c378f96c9d454536f2c08e4735bdf746
2016-08-25 03:12:41 +00:00
Darryl Quinn
efd133cbd4
change AREDN upload to only pull /links from OLSR
...
enables support for drawing map links as well.
fixes AREDN->ticket:181
Change-Id: I5b0dd4b99d3892d136021faa4a5bd5856607b2a5
2016-08-24 20:40:47 -05:00
Darryl Quinn
dc17259f4d
enhancement: make snr chart fill more of the screen
...
Change-Id: I31b0cc10bcabe7bff47ac52a4feb1cc39f874cfa
2016-08-19 15:08:55 -05:00
Conrad Lara - KG6JEI
3962465066
feature: Instruct search engines not to index node pages
...
Provide HTTP header to search engines not to index the page.
Eventually we will likely want to add nofollow and a robots file
but first we need to get this pushed out and into search engine hands
so they delist the entires that may already be cached.
Change-Id: I47a68fcc8fb69c43c3f1bbe2b8a04a3e8d51571a
2016-08-16 18:15:06 -07:00
AE6XE
7de59de3b9
bugfix: TxMbps compatibility with Chaos Calmer
...
fixes AREDN->ticket:176
Change-Id: I005b391ecdc3611dc7fc59632743759b04d76728
2016-08-12 15:42:59 +00:00
AE6XE
d4b7617e03
remove non-mesh modes from setup options
...
fixes AREDN->ticket:175
Change-Id: I7517df178a5ce82ef79ec4af844932fe6569d8da
2016-08-07 21:38:18 +00:00
Darryl Quinn
4ada350a4c
add olsr/links to aredn data server push info
...
Change-Id: Iea15ac7f4ea0858702bb3d8eaa06f36135f76eb4
2016-07-12 10:55:43 -05:00
Darryl Quinn
df9c6601be
enable leafletjs, leafletcss, and maptiles to be based on uci config vars
...
fixes AREDN->ticket:174
Change-Id: I0133ab46df95b14d55192e5e47fa4e8f6377b4c9
2016-06-22 08:43:28 -05:00
Conrad Lara - KG6JEI
6bc3999b59
hardware: Rocket M5 with GPS 0xe1c5
...
fixes AREDN->ticket:162
Forum reference: http://www.aredn.org/content/m5-gps
Submitted by KE2N
{{{
board.sysid=0xe1c5
board.cpurevision=0x00000101
board.name=Rocket M5
board.shortname=R5N
board.subtype=GPS
board.netmodes=7
board.hwaddr=00272228652D
board.reboot=50
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
board.gps=1
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe1c5
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.min=-4
radio.1.txpower.offset=5
radio.1.ieee_modes=5
radio.1.antennas=13
radio.1.def_antenna=13
radio.1.antenna.1.id=1
radio.1.antenna.1.name=AMO-5G10
radio.1.antenna.1.gain=10
radio.1.antenna.1.builtin=0
radio.1.antenna.1.chains=2
radio.1.antenna.1.chain.1.id=0
radio.1.antenna.1.chain.1.name=Vertical
radio.1.antenna.1.chain.2.id=1
radio.1.antenna.1.chain.2.name=Horizontal
radio.1.antenna.2.id=2
radio.1.antenna.2.name=AMO-5G13
radio.1.antenna.2.gain=13
radio.1.antenna.2.builtin=0
radio.1.antenna.2.chains=2
radio.1.antenna.2.chain.1.id=0
radio.1.antenna.2.chain.1.name=Vertical
radio.1.antenna.2.chain.2.id=1
radio.1.antenna.2.chain.2.name=Horizontal
radio.1.antenna.3.id=3
radio.1.antenna.3.name=AM-5G16-120
radio.1.antenna.3.gain=16
radio.1.antenna.3.builtin=0
radio.1.antenna.3.chains=2
radio.1.antenna.3.chain.1.id=0
radio.1.antenna.3.chain.1.name=Vertical
radio.1.antenna.3.chain.2.id=1
radio.1.antenna.3.chain.2.name=Horizontal
radio.1.antenna.4.id=4
radio.1.antenna.4.name=AM-5G17-90
radio.1.antenna.4.gain=17
radio.1.antenna.4.builtin=0
radio.1.antenna.4.chains=2
radio.1.antenna.4.chain.1.id=0
radio.1.antenna.4.chain.1.name=Vertical
radio.1.antenna.4.chain.2.id=1
radio.1.antenna.4.chain.2.name=Horizontal
radio.1.antenna.5.id=5
radio.1.antenna.5.name=AM-M-V5G-Ti
radio.1.antenna.5.gain=17
radio.1.antenna.5.builtin=0
radio.1.antenna.5.chains=2
radio.1.antenna.5.chain.1.id=0
radio.1.antenna.5.chain.1.name=Vertical
radio.1.antenna.5.chain.2.id=1
radio.1.antenna.5.chain.2.name=Horizontal
radio.1.antenna.6.id=6
radio.1.antenna.6.name=AM-5G19-120
radio.1.antenna.6.gain=19
radio.1.antenna.6.builtin=0
radio.1.antenna.6.chains=2
radio.1.antenna.6.chain.1.id=0
radio.1.antenna.6.chain.1.name=Vertical
radio.1.antenna.6.chain.2.id=1
radio.1.antenna.6.chain.2.name=Horizontal
radio.1.antenna.7.id=7
radio.1.antenna.7.name=AM-5G20-90
radio.1.antenna.7.gain=20
radio.1.antenna.7.builtin=0
radio.1.antenna.7.chains=2
radio.1.antenna.7.chain.1.id=0
radio.1.antenna.7.chain.1.name=Vertical
radio.1.antenna.7.chain.2.id=1
radio.1.antenna.7.chain.2.name=Horizontal
radio.1.antenna.8.id=8
radio.1.antenna.8.name=AM-V5G-Ti
radio.1.antenna.8.gain=21
radio.1.antenna.8.builtin=0
radio.1.antenna.8.chains=2
radio.1.antenna.8.chain.1.id=0
radio.1.antenna.8.chain.1.name=Vertical
radio.1.antenna.8.chain.2.id=1
radio.1.antenna.8.chain.2.name=Horizontal
radio.1.antenna.9.id=9
radio.1.antenna.9.name=AM-5AC21-60
radio.1.antenna.9.gain=21
radio.1.antenna.9.builtin=0
radio.1.antenna.9.chains=2
radio.1.antenna.9.chain.1.id=0
radio.1.antenna.9.chain.1.name=Vertical
radio.1.antenna.9.chain.2.id=1
radio.1.antenna.9.chain.2.name=Horizontal
radio.1.antenna.10.id=10
radio.1.antenna.10.name=AM-5AC22-45
radio.1.antenna.10.gain=22
radio.1.antenna.10.builtin=0
radio.1.antenna.10.chains=2
radio.1.antenna.10.chain.1.id=0
radio.1.antenna.10.chain.1.name=Vertical
radio.1.antenna.10.chain.2.id=1
radio.1.antenna.10.chain.2.name=Horizontal
radio.1.antenna.11.id=11
radio.1.antenna.11.name=RD-5G-30
radio.1.antenna.11.gain=30
radio.1.antenna.11.builtin=0
radio.1.antenna.11.chains=2
radio.1.antenna.11.chain.1.id=0
radio.1.antenna.11.chain.1.name=Vertical
radio.1.antenna.11.chain.2.id=1
radio.1.antenna.11.chain.2.name=Horizontal
radio.1.antenna.12.id=12
radio.1.antenna.12.name=RD-5G31-AC
radio.1.antenna.12.gain=31
radio.1.antenna.12.builtin=0
radio.1.antenna.12.chains=2
radio.1.antenna.12.chain.1.id=0
radio.1.antenna.12.chain.1.name=Vertical
radio.1.antenna.12.chain.2.id=1
radio.1.antenna.12.chain.2.name=Horizontal
radio.1.antenna.13.id=13
radio.1.antenna.13.name=RD-5G-34
radio.1.antenna.13.gain=34
radio.1.antenna.13.builtin=0
radio.1.antenna.13.chains=2
radio.1.antenna.13.chain.1.id=0
radio.1.antenna.13.chain.1.name=Vertical
radio.1.antenna.13.chain.2.id=1
radio.1.antenna.13.chain.2.name=Horizontal
radio.1.distance_limit_km=0
radio.1.chanbw="5,8,10,20,30,40"
feature.rssi.leds=2
feature.gps=1
feature.gps.leds=3
feature.ext_reset=0
}}}
Change-Id: I6c03799cc04577b873b7ec04038238fb761ec3e7
2016-06-21 16:13:06 -07:00
KG6JEI
32a0d6348d
Merge "Merge branch 'ChaosCalmer' into develop" into develop
2016-06-20 05:53:31 +00:00
Conrad Lara - KG6JEI
061ede3488
Merge branch 'ChaosCalmer' into develop
...
Change-Id: I26a8677595a25aae267b7365f1e5835ea68f49b4
2016-06-19 19:26:12 -07:00
Conrad Lara - KG6JEI
8abe628915
Cleanup /usr/local/bin scripts to pass shellcheck
...
Correct all shellcheck "errors" and "warnings" for
/usr/local/bin/* shell scripts.
This is necesary to have Jenkins start publishing test results.
All code worked on nodes but pushed to strict posix compliance
as part of the cleanup.
SC1001,SC2002,SC2004,SC2006,SC2034,SC2039,SC2086,SC2155
https://github.com/koalaman/shellcheck/wiki for more info
Change-Id: If1f27381eedae79087e490ea12f5939f8cc525a0
2016-06-18 04:52:08 +00:00
Darryl Quinn
39efd11beb
bugfix: could not delete client connections from vpnc page
...
fixes AREDN->ticket:170
Change-Id: Ieacdfd3eebf288e6fc83dcade7903eb96419dff4
2016-06-16 22:37:41 -05:00
KG6JEI
ae6688dc33
Merge "security feature: Enhance HTTPD password security" into develop
2016-06-16 05:39:10 +00:00
Conrad Lara - KG6JEI
1ee5cc698b
cleanup: Cleanup shellcheck reported concerns in vtun_up
...
Change-Id: I88c775243a33731a182fd81d411bca664538e536
2016-06-15 08:08:28 -07:00
Conrad Lara - KG6JEI
70e93c09d7
bugfix: Refer to in interface by iif not iff
...
This may be why we have seen nodes in the past with stray routing table entries.
Change-Id: Ib47cc76eb9f2cd9328252a8a8a6d1bda0a6af35b
2016-06-15 08:07:20 -07:00
Darryl Quinn
d45bbb9dea
fixes AREDN->ticket:172
...
Change-Id: I0db2dbc14283c2458a55b4e75ca25ce95d867b5b
2016-06-14 14:18:52 -05:00
Conrad Lara - KG6JEI
8f91ad1e0e
security feature: Enhance HTTPD password security
...
Move httpd.conf to not store password and instead depend on the shadow password file.
Also tag the 40_aredn_migrate-httpdconf script to be +x. Not strictly necessary but wish to have this standard
Change-Id: I018d9a3294e45af2316b3c3947ef2a7d8081268b
2016-06-10 19:37:57 -07:00
Darryl Quinn
6e2a56b106
fixes AREDN->ticket:163
...
KG6JEI COMMENT:
Origonaly this was commit 027d0e6b6c682cbf264912842fb2fb9ce92084c7
This got lost in the repo migration and has been chery-picked back into the repo.
Change-Id: If02ade8efca0520b23abccdeceb9bf0fc4eb73d1
2016-05-31 23:01:26 -07:00
Conrad Lara - KG6JEI
3bae69cc5c
hardware: add NanoBridge M5 0xe235 in testing
...
XM.v5.5# cat /etc/board.info
board.sysid=0xe235
board.cpurevision=0x000000c2
board.name=NanoBridge? M5
board.shortname=NB5
board.subtype=
board.netmodes=7;
board.hwaddr=00156D1EED1F
board.reboot=30
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=1524
board.phy.2.maxmtu=1524
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe235
radio.1.subvendorid=0x0777
radio.1.txpower.max=23
radio.1.txpower.offset=1
radio.1.antennas=3
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Not specified
radio.1.antenna.1.gain=0
radio.1.antenna.2.id=1
radio.1.antenna.2.name=300
radio.1.antenna.2.gain=22
radio.1.antenna.3.id=2
radio.1.antenna.3.name=400
radio.1.antenna.3.gain=25
fixes AREDN->ticket:161
Change-Id: I050f39646000e4e6ce4342e7140046ba77396d38
2016-05-31 19:56:03 -07:00
Conrad Lara - KG6JEI
1271db794a
Merge 3.16.1.0 as released into develop
...
Merge branch 'release-3.16.1.0' into develop
2016-05-17 09:50:40 -07:00
Darryl Quinn
215e5abf47
fixes AREDN->ticket:166
2016-05-15 17:40:29 -05:00
Darryl Quinn
6912f69dc8
fixes AREDN->ticket:165
2016-05-15 17:35:43 -05:00
AE6XE
38a2835471
bugfix: sysupgrade full reboot message not displaying
2016-05-10 19:22:33 -07:00
Darryl Quinn
9800612d86
allow sysupgrade time to settle in order for http to finish delivering the "rebooting" page
2016-04-29 22:29:57 -05:00
Conrad Lara - KG6JEI
1adb471d31
hardware: Mark devices as supported for 3.16.1.0
...
Moving devices that have been tested in beta for 3.16.1.0 to supported status
2016-04-20 17:57:08 -07:00
Darryl Quinn
23bc85687c
fixes AREDN->ticket:151
2016-04-08 13:02:35 -05:00
Conrad Lara - KG6JEI
86d17e0998
bugfix: RFC Compliance for DHCP and Classless static routes
...
RFC requires that the DHCP server include the default gateway (0.0.0.0/0) route as part the Classless network list.
Moved to node-setup so it can be set dynamically at setup run time.
fixes AREDN->ticket:155
2016-03-31 22:54:29 -07:00
Trevor Paskett - K7FPV
7d437e2cb8
bug fix: run sysupgrade forked off from uhttpd, kill un-necessary processes and flush page cache during firmware upgrade
2016-03-08 20:29:35 -07:00
Conrad Lara - KG6JEI
fad8a43974
cleanup: Resolve "used once" warning.
2016-03-06 23:38:00 -08:00
Conrad Lara - KG6JEI
b4d9a4fc7b
bugfix: Migrate vtund firewall rules to the new firewall system.
...
Resolves issue with firewall rules being purged on a port change.
Requires changeset:dcc9d83e6e4bc3142f18fd077a3f5a955a66ce00/aredn_packages
2016-02-24 21:06:03 -08:00
Trevor Paskett - K7FPV
902371a876
add loading spinner to signal page
2016-02-23 20:52:02 -08:00
Darryl Quinn
35b8278b34
bugfix: traffic generated from the tun client would not forward thru the server
2016-02-23 13:20:19 -06:00
Darryl Quinn
aa3f8855c1
fixes AREDN->ticket:151
2016-02-23 10:00:51 -06:00
AE6XE
64f1c941f2
Merge branch 'mesh_mbps' into release-3.16.1.0
2016-02-11 21:18:49 -08:00
AE6XE
0f1c33196b
Bugfix: TxMbps help.html updates to match (rate * ewma) calulation
2016-02-11 21:17:23 -08:00
AE6XE
1419f28749
Merge branch 'mesh_mbps' into release-3.16.1.0
2016-02-10 23:32:42 -08:00
AE6XE
225fabd063
Bugfix: Calculation of TxMbps now (MCS rate * %-packet-success)
...
ThroughPut numbers in rate selection table were not based on
expected definition from Minstrel's docs. Rather, was based
on 1200 byte packets and transmit time included SIFS time
inflating #s.
2016-02-10 23:23:25 -08:00
AE6XE
5b7475f607
Feature: Add 0xe4a2 boardid support for AirRouter (non-HP)
...
XM.v5.5.11# cat /etc/board.info
board.sysid=0xe4a2
board.cpurevision=0x00000101
board.name=AirRouter
board.shortname=LAP
board.subtype=
board.netmodes=15
board.hwaddr=687251405E66
board.reboot=30
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe4a2
radio.1.subvendorid=0x0777
radio.1.txpower.max=20
radio.1.txpower.offset=1
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=0
2016-02-10 20:13:59 -08:00
Darryl Quinn
001496e7dc
bugfix: re-worked wifi distance setting to show all values (miles, KM, meters)
2016-02-04 17:55:57 -06:00
Conrad Lara - KG6JEI
7df4747aff
bugfix: Traffic from Lan to DTDLINK not masqueraded when in NAT mode.
...
Due to a firewall chain name changes in BB when a node was in NAT mode (instead of recommended direct mode) connections that went out over DTDLink as the first hop would not be masqed and as such would not work.
2016-01-23 20:40:01 -08:00
Conrad Lara - KG6JEI
765ca369ea
bugfix: Disable Default Route checkbox was not displayed in NAT mode
2016-01-22 21:10:28 -08:00
Trevor Paskett - K7FPV
602dc13d8a
add loading spinner to signal page
2016-01-22 15:32:33 -07:00
Conrad Lara - KG6JEI
b38309bab5
Merge branch 'FixupTunnelFirewall' into release-3.16.1.0
...
Various fixes around tunnel firewall rules
2016-01-21 20:40:43 -08:00
Conrad Lara - KG6JEI
29ba1c0419
bugfix: Tunnel Firewall: Accept SNMP and default to block on input chain instead of accept
2016-01-21 20:39:59 -08:00
Conrad Lara - KG6JEI
a7ae3afe4e
Merge branch 'AirRouterLEDS' into release-3.16.1.0
...
Add support for the Globe LED to be the mesh status on AirRouter
ref AREDN->ticket:144
2016-01-21 20:21:48 -08:00
Trevor Paskett - K7FPV
923039fcc0
Merge branch 'release-3.16.1.0' of ssh://git.aredn.org/aredn_ar71xx into release-3.16.1.0
2016-01-20 10:10:34 -07:00
Trevor Paskett - K7FPV
35e05b7dac
change uhttpd script_timeout from 60 to 240 to fix uploading firmware on slow links
2016-01-20 10:09:52 -07:00
Darryl Quinn
bc04cd9a5a
updated help file with "optionalsettings" information (lat/lon, upload, ntp, etc.)
2016-01-20 01:25:27 -06:00
Darryl Quinn
04c8de37a2
feature: enabled new chart zoom options
2016-01-19 19:58:00 -06:00
Darryl Quinn
c0973f68a9
feature: enabled option to save chart as a JPG or PNG
2016-01-19 19:39:31 -06:00
Conrad Lara - KG6JEI
5fa47d6f93
bugfix: ar71xx: airrouter: Use "Globe" LED to indicate mesh connection
2016-01-17 20:09:11 -08:00
Conrad Lara - KG6JEI
0f837d601a
bugfix: Tunnel firewall rules throw a chain does not exist on firewall restart.
...
This chain may not exist by design of the check.
Redirect the iptables error to /dev/null so it doesn't clog logs
2016-01-16 21:20:22 -08:00
Conrad Lara - KG6JEI
5663741cb1
bugfix: On firewall reload some tunnel rules were not being inserted into the default chains which are flushed on both reload and restart of firewall by OpenWRT fw scripts.
2016-01-16 21:20:22 -08:00
AE6XE
2be20cbde2
bugfix: Tunnel firewall rule chain names are incorrect.
...
Based on previously reverted commit 646702aab9
2016-01-16 21:20:16 -08:00
AE6XE
06eb7fa688
bugfix: Remove erroneous reference in license header of 01-tunnels script.
...
Script is a new file created after the split from BBHN and did not use code from a file BBHN worked on.
2016-01-16 19:58:38 -08:00
Conrad Lara - KG6JEI
921967d5f9
Revert "bugfix: resolve bad chain ref and port from hotplug to a firewall include"
...
This reverts commit 646702aab9
.
Needs to be broken up into separate commits and doesn't cleanly fix issue with tunnel firewall
2016-01-16 19:55:20 -08:00
AE6XE
6d619b6757
Merge: bugfix: snrlog fix for out-of-range noise floor values returned by iw
2016-01-16 17:23:28 -08:00
AE6XE
f02d4abd33
bugfix: snrlog fix for out-of-range noise floor values returned by iw
2016-01-16 17:21:55 -08:00
AE6XE
646702aab9
bugfix: resolve bad chain ref and port from hotplug to a firewall include
2016-01-16 13:26:14 -08:00
Darryl Quinn
b870bbce6c
CanvasJS upgraded to 1.8 GA
2016-01-15 17:19:06 -06:00
Conrad Lara - KG6JEI
243ded9f23
Bump banner to 3.16.1.0 in prep for release
2016-01-13 09:45:36 -08:00
Darryl Quinn
c34ce710dc
bugfix: always show buttons, added javascript error handling when not internet connected
2016-01-12 20:30:00 -06:00
Trevor Paskett - K7FPV
507dbab626
Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into develop
2016-01-12 11:21:12 -07:00
Trevor Paskett - K7FPV
0aca4ce5c7
fix bug with spaces in time zone names
2016-01-12 10:58:06 -07:00
Darryl Quinn
16b06c4554
rearranged the order of buttons in the optional location section
2016-01-12 11:33:25 -06:00
Darryl Quinn
38d2c1fc8b
feature: find me using browser location services
2016-01-11 17:41:35 -06:00
Darryl Quinn
7314a868e5
feature: added button to post data to aredn server including olsrd topology info
2016-01-11 12:46:12 -06:00
AE6XE
de2ba6ec59
feature: Add definition for NS Loco M5 0xe0a5
2016-01-10 18:49:58 -08:00
AE6XE
31032615a7
merge: bugfix: rssi_monitor increase tolerance on test one notch
2016-01-09 21:02:55 -08:00
AE6XE
97d48c2b84
bugfix: rssi_monitor increase tolerance on test one notch
2016-01-09 21:00:09 -08:00
AE6XE
c21b4f7b35
bugfix: removed Strongest Selection from Archive chart
2016-01-09 20:55:53 -08:00
Conrad Lara - KG6JEI
bb10ca7faf
Merge branch 'FirewallIncludes' into develop
2016-01-09 19:48:18 -08:00
Conrad Lara - KG6JEI
813c4cefcf
feature: Decrease WIFI Beacon rate in Mesh mode to around 2 times a second.
...
This changes the beacon rate from once every 100tu's to once every 500tu's
1tu=1024 microseconds
This will decrease the amount of RF time being used by beacon packets.
This is especially important on 900MHz and 2.4GHz using 5MHz wide channels where 10 nodes beaconing 10x a second at ~256kbit/s can use up around 45% of the RF channel in beacons alone.
Other bands and channels and widths are not expected to see as significant an advantage due to the faster data rates.
2016-01-09 17:39:44 -08:00
Conrad Lara - KG6JEI
e8b2ffd7ea
feature: FirewallIncludes: Migrate tunnel firewal rules to new include format.
...
These rules setup chains that may be needed by other firewall rules as such we need to set them up early to be sure includes work.
2016-01-09 16:24:54 -08:00
Conrad Lara - KG6JEI
477a20d55a
feature: FirewallIncludes: Add program that will auto include firewall rules that are in a set directory.
...
This is the basis for allowing packages to contain firewall rules that can be just dropped in a folder at install time.
2016-01-09 16:24:45 -08:00
Conrad Lara - KG6JEI
5c87a894c9
license: Add license header to vtun_up file
2016-01-09 15:10:58 -08:00
Trevor Paskett - K7FPV
6f3cb97ea2
fix new lines
2016-01-08 21:09:38 -07:00
Trevor Paskett - K7FPV
ad8e3c0605
revert validate_hostname change
2016-01-08 18:05:31 -07:00
Trevor Paskett - K7FPV
44ab46bc87
move new settings to optional area under table, disable ntp server, ntp server fqdn validation
2016-01-08 18:04:25 -07:00
Trevor Paskett - K7FPV
c6d02d964a
change timezone to time_zone
2016-01-08 11:50:45 -07:00
Trevor Paskett - K7FPV
7653acc333
Merge branch 'develop' into ntp
2016-01-08 11:11:13 -07:00
Trevor Paskett - K7FPV
6f97c52565
add time zone and ntp server to setup page
2016-01-08 10:58:22 -07:00