For some reason, there was code in the driver to block the setting of
the coverage when a previous setting wasn't a particular value.
It's unclear what this was trying to achieve or prevent, but it stopped AC
devices operating efficiently (by a factor of 10x or more).
There's a bug where 2.4GHz channels will associate incorrectly with other 2.4 channels
even though they are on different frequencies. The problem appears to be triggered during
scans when scan probes are sent and received on many different frequencies, but are then
reported as as they arrive as if they come from the selected frequency of the device, causing
incorrect stations to be created. This can only occur for IBSS (adhoc) mode, when the
IBSS frequency is fixed, and when the SSID is also fixed. We do all this for AREDN.
Fortunately these probe contains (but *only* on 2.4 GHz) the actual frequency of the sending
device, so we can avoid incorrectly creating stations which are not really a match.
This situation does not seem to happen on 5GHz channels.
e Please enter the commit message for your changes. Lines starting
* Update to Openwrt 21.02 and add support for the CPE710 v1
Update scripts to change references to ifname to device due to a change in Openwrt naming
reverse-wpad-basic-wolfssl and disable SSL on Curl
NOTE: The compile host must have python3-distutils installed for gpsd to build
* aredn: initial working upgrade to openwrt 21.02.1
* aredn: update 1 to working upgrade to openwrt 21.02.1
* aredn: add cpe710v1 to build config
* Andrew's patches
* Remove duplicates + display perl
* Temp disable wifi extension patch
* ifname/ports support
* Add spectrum patch back in
* Generic function to extra interfaces
* New api to get wifi ifname
* Disables jails
* Style link
* aredn: partial upgrade to openwrt 22.0.3.0
added AC device images and partial migration to 22.0.3.0
firewall upgrade pending
* aredn: update mesh-release and revert config.mk
* Unused
* NFT firewall rewrite
* Common-isze configs
* Fix network layout for hap2
* Use local packages dev (new firewall rules)
* Add HAP2
* Add pause after network restart to let bridge reinitialize
* Various lua fixes for new lua version
* Tweak config
* Re-fix networking (lost patch change)
* Add new radio names
* Tolerate missing wifi
* Fix hap-lite switch setup
* More devices
* New radio id
* Build Rocket 5AC lite
* Remove need for luci.sys
* Remove need for luci.sys
* Explicitly name wlan interfaces
* Handle different compatibility verisoning
* Update networking for switches
* ipref version bump
* Extra flag for curl
* Better compat_version fix
* Remove wolfssl
* Fix dns server
* Fix device name
* Unused
* Remove things we dont need
* Remove unused packages
* Generic macaddr overrides
* Fix uci commit
* Fix luci.template.parser to avoid luci.http loading the real thing
* Rocket-M build
* Add search-domain dhcp option
* Turn of ipv6
* No IPV6 in dnsmasq
* Override mac addresses if devices all the same
* Working from master (for now)
* Put back hostap
* Disable old ethmac fixup
* Tweak configs
* Move back to v22.03.2
Leave ipq4019 builds to master
* Need IPV6 to compile nft firewall
* Rocket-M fixes
* Before we start
* WIP
* Working snapshot
* Cleaned patches
* Merged patch
* Single patch to support HAP2
* Fix typo
* Add nanostation-m
* 5/10Mhz patch
* 5+10MHz patch for ath10k-ct driver
* Extend 2Ghz channel check to include -4 to -1
* Add chanbw setup for ath10k (like ath9k)
* Added TP-Link CPE710 v1
* Override firmwares
* Missing patch
* Dropbear config like 3.22.8.0
* Add Ubiquiti Rocket 5AC Lite
* Fix c6
* Update
* Need more scan channels
* Remove IPV6
* Improve mac fixups
* Put back missing nft app
* IPv6 removed so dont have to disable it
* Fix rocket-m flash bug
* Fix nanostation-m
* Nanobridge is tiny
* Fix wifi order for ar750
* Rocket M5 XW support
* New rates
* Fix firewall4 so we don't need IPv6
* Allow channel width to be restricted
* Move channel list into library
* Fix naming
* Mechanism to block specific channels on specific radios
* Refresh buttons
* routerboard-sxt-5nd
* CPE605 v1.0
* Improve rocket m xw
* tpink
* Update patch
* Update to remove disable
* Remove BW restrictions on cpe710
* Restrict to what has been tested
* Remove test BW restrictions
* sxtsq-5-ac
* Update
* Update
* powerbeam-m5-300 support
* Fix
* Fix hap2
* Tidy unused patches
* Remove limit
* Add ubnt_bullet-m-ar7241
* Added ubnt_nanobeam-ac-gen2
* Fix typo
* Tolerate missing dtd ip
* Explicitly gix hap2 mac addresses
* Fix some broken patches
* Hap2 wont work at 5MHz
* Ubiquiti LiteBeam 5AC Gen2
* Fix compat_version for sxt 5ac
* Update patch
* Unused
* Fix lan configuration for some devices
* Rolling average of noise level
* Unused
* Split out the ath10k rssi monitor (its very simple at the moment)
* Ignore .DS_Store
* Reboot if ethernet doesnt come up (but only once!)
* reboot returns - add exit
* Add some logging info
* Fix ]
* Check all possibly ethernet bridges
* Improve mac fixing
* Remove HostAP on small memory devices
* Reduce dropbear footprint
* Add setsid
* Kill hostap when upgrading to save memory
* Different way to detect hostapd unavailable
* New build steps
* Improve manager logging
* Fix name conflict for the two monitors
* Try to improve test mesh name resolve problem
* Migrate tiny to generic (tiny doesnt work properly)
* Typo
* Another attempt to fix macs for Mikrotik
* Protect against missing trackers
* Fix wpad for ipq40xx
* Remove old tunnel check code
* Enable ZRAM swap to aid low memory devices
* ath10k noise can something be out of range - protect against that
* Updated with current devices and status
* Update firmware which has been tested
* Updated with more builds
* More binary/README
* Fix css error
* Start noise at sensible base level
* Unfix the css so it looks how it use to.
* Save as much memory as we can on lowmem nodes
* Hide some options on low memory devices
* Add "eol" to 32MB devices
* Restart network rather than reboot node if it seems to be broken
* Fixes
* Revert network reset
* Fix ar750 networking
* Continue to trim tiny configs
* More devices
* Dump IW output messages
* Fix Rocket 5AC intermittent ethernet issue
* Ethernet fix for PowerBeam 5AC 500
* More tiny size reduction
* More support data
* Fixed POE and USB power features
* Add Ubiquiti NanoBeam AC (gen1)
* NanoStation (not NanoBeam)
* Add mii-tool package
* Device updates
* Bump update time to 5 minutes
* Fix ethernet negotiation for rocker-5ac and nanobeam
* Fix iplookup
* Config changes based on call feedback
* Radio listing fixes
* Update with more untested builds
* Fallback TxMbps extracted from iw station dump
* Fix tunnel detection for low memory nodes
* Remove unused feed packages
* snapshot build
* Update stability info
* Add powerbeam-5ac-500
* Typo
* Add missing 3.22.1.0
* Add MikroTik LHG 5 AC
* Fix permissions
* Fix permissions
* AirGrid's take Bullet builds
* Mikrotik AC3
* Improve supportdata structure a little to make it easier to find things
* Restore WAN VLAN overrides
* Fix vlan regex for hap2 and hap3
* Support old and new style poe controls
* hap-ac3 is version 1.1
* Handle typo in some openwrt config files
* Fix HAP AC3 install
* Update hap ac3 status
* Support user overrides for network ports (non-swconfig devices)
* LHG 5AC support
* Remove -nand
* Remove non-working platform.sh change
* tunnel weight override
* Omit LinkQualityMult when value is 1
* Add mANTBox 19s and 15s
* Support ath79 mikrotik devices which require ath10k in the initramfs
Co-authored-by: apcameron <apcameron@softhome.net>
Co-authored-by: Joe AE6XE <ae6xe@arrl.net>
Co-authored-by: Joe Ayers <joe@arrl.net>
* Improve the firmware upgrade process
The old firmware upgrade process attempted to free up RAM by reusing
the 'upgrade_kill_prep' script which is later used by '/sbin/sysupgrade'.
Unfortuantely this doesn't work as intented. While the script will go about
killing various services, 'procd' just goes and starts them up again using
quite a bit more memory in the process. Instead this script just kills
the various daemons 'no questions asked' and then runs the associated
'/etc/init.d/xxx stop' script to instruct 'procd' not the start them up again.
This gets us to the place the original script was trying to go.
+ A syntax fix in '007' patch (need spaces around the [ .. ])
* Inline the style for the firmware page to avoid sleep before flash
* Minor reliability improvements
* Clear away services even earlier
The iperf3 package installs a firewall rule, but the script to restart
the firewall on install had a typo meaning it wasn't called (so the
new firewall setup required a reboot)
In the US, part 97 ham radio lower band edge is 5650.
Channel 131 @ 10MHz channel width is the lowest channel
setting that stays within allocation.
fixes#550
Apply openwrt PR 3006
https://github.com/openwrt/openwrt/pull/3006
author: Thibaut VARÈNE <hacks@slashdirt.org>
early patch to AREDN will be removed and inherited from openwrt in
future 19.07 point or later release. This patch enables use
of newer BaseBox, AntBox, and possibly other updated devices with ath9k
calibration data encoded with a different technique.
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
Specifications:
* SoC: Qualcomm Atheros AR9344 (560 MHz)
* RAM: 64MB
* Storage: 8 MB
* Wireless: 2.4GHz N based built into SoC 2x2
* Ethernet: 2x 100/10 Mbps, integrated into SoC, 24V POE IN
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
TP-Link CPE610-v2 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on Atheros AR9344
Specifications:
Based on the same underlying hardware as the TP-Link CPE510
Power, LAN0, WLAN green LEDs
23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector
Flashing instructions:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Signed-off-by: Andrew Cameron apcameron@softhome.net
This adds support for a popular low-cost 5GHz N based AP
Specifications:
- SoC: Atheros AR9344
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
- Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Signed-off-by: Andrew Cameron <apcameron@softhome.net>
It was discovered that sysupgrade would exit with an
error when some processes could not be killed. The
wifi interface is brought down to avoid this condition
prior to doing the sysupgrade
* Add experimental support for the GL.iNet GL-AR150 - https://openwrt.org/toh/gl.inet/gl-ar150
Mesh networking and tunneling have been confirmed working.
This device has been confirmed capable of operating on channel -1, but /etc/config/wireless has to be manually edited to select this channel.
* www/cgi-bin/perlfunc.pm patched to add UI support for the GL.iNet GL-AR150
* www/cgi-bin/perlfunc.pm patched to add UI support for the GL.iNet GL-AR150 - seems like only 18 dBm TX power is possible
* Remove Experimental comments and designate as stable
* Configure Ethernet ports & VLANs for GL-AR150, and update README.md
* Fix misunderstanding re README.md
* Patch Upstream OpenWRT GL-AR150 LAN & WAN LED mapping, configure WLAN LED as mesh linked indicator.
This reverts commit d5be7814b3.
Auto Distance is not ready for a release and will be
reintroduced afterwards. Added logic to reset '0' distance
to 60km so tower nodes will continue to respond after
upgrade if running the experimental auto distance
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
* aredn: hAP ac lite enable 5GHz LAN Access Point
enable ability to bridge LAN physical ports with wireless
LAN Access Point capability. On dual band hAP ac lite,
used in parallel with mesh RF on 2GHz. Enables future
features on single band devices to turn off mesh RF and
repurposed for mesh LAN Access Point.
closes: #215
The aredn project benefits from precompressed files given
mesh nodes are typically long distant RF links and UI
is accessed remotely. uhttpd will look for the filename
requested first, then if not found, look for filename.gz
and update content header passed back as appropriate.
https://patchwork.ozlabs.org/patch/514918/
Config the NanoStation M2/M5 XW devices to be fully
functional with a standard aredn port definition.
The vlans are not configured in the switch, rather
acting like a dumb swtich, enabling tagged and untagged
packets to exist on the same switch port at the same time.
This commit enables the ports on the switch to directly
send all traffic to all other ports when not configured
directly in vlan mode.
The NanoStation M2 and M5 XW switch configuraiton had LAN
on primary port (untagged) and DtDLink and WAN (vlan 1 and 2)
on secondary port. This change enables untagged, vlan 1,
and vlan 2 on primary port to function. This configuration
also functions on the secondary port. However, devices on
the same network can not communicate with one another across
the two ports. Although, access works from the greater mesh
and the node to devices on both ports on the same network.
When using one port the behavior is now consitent with all
other AREDN devices. The use of both ports offers some
benefit, but with the above limitations.
Add support for the hAP lite model rb952UI-5ac2nD equivilent to
the UBNT AirRouter. The 5Ghz interface will be configured in a
2nd phase. This hAP lite model has double the RAM and Flash
of the AR. the 2Ghz is MIMO (5Ghz is single antenna).
Tim Wilkinson