Tim Wilkinson
4a8cd83217
Fix LQM reporting and toggle ( #1483 )
2024-09-10 10:18:58 -07:00
Tim Wilkinson
1df7fa3e05
Mesh Node -> AREDN Node ( #1472 )
2024-09-07 15:11:14 -07:00
Tim Wilkinson
5bcd2b92a0
Make index.html (which automatically redirects) respect dark mode ( #1471 )
2024-09-07 14:48:57 -07:00
Tim Wilkinson
bd46bb2e41
Detect new UI in old server tunnels so we can warn ( #1440 )
...
Because we can delete tunnels in the new UI, this will cause
problems in the old UI which doesnt support this. Warn when
we detect this.
2024-09-01 21:26:00 -07:00
Tim Wilkinson
d4e3869772
Fix bad gateway ( #1355 )
2024-08-21 20:50:25 -07:00
Tim Wilkinson
9432beccfd
Force the new UI to be the default ( #1354 )
2024-08-21 20:20:43 -07:00
Tim Wilkinson
00a5cca7b5
Fix and harminize the way tunnel IPs wrap (and avoid using 256 as an octet) ( #1315 )
2024-08-18 18:01:55 -07:00
Tim Wilkinson
0432bf3165
New UI ( #1263 )
...
* New UI
* Fix gzip filename race condition
* Fix scrolling on first use page
2024-08-15 20:28:45 -07:00
Tim Wilkinson
484dc5ba3a
Mikrotik bootloader v7 support ( #1258 )
...
Some Mikrotik devices can no longer be downgraded to v6. Add support for
v7 bootloaders.
2024-08-05 17:11:53 -07:00
Steve
55665a42a4
update wg tun sv NET label ( #1255 )
2024-08-03 09:21:36 -07:00
Tim Wilkinson
5d8a240c8f
Add service-validation-state to support data. ( #1241 )
2024-06-10 14:46:19 -07:00
Tim Wilkinson
166cf0d742
Send iperf info line by line rather than all at the end ( #1240 )
...
* Send iperf info line by line rather than all at the end
* Less newlines
2024-06-09 10:08:14 -07:00
Tim Wilkinson
2f74728693
Add names to xlink routes and bridges. ( #1239 )
...
Fix aredn_message_all file-not-found error.
2024-06-07 18:39:44 -07:00
Tim Wilkinson
192e6deaec
Restart firewall when changing tunnels (now required) ( #1233 )
2024-05-31 21:05:14 -07:00
Tim Wilkinson
c0d38a4e89
Update registered trademarks ( #1225 )
2024-05-29 00:45:25 -07:00
Tim Wilkinson
8507fbc250
Tiny builds dont have wg installed ( #1221 )
2024-05-26 16:42:48 -07:00
Tim Wilkinson
108d0da939
Fix fat-fingered display of lqm status on mesh page ( #1215 )
2024-05-23 11:31:31 -07:00
Tim Wilkinson
ed422f3550
Better leaf node detection ( #1214 )
...
* Better leaf node detection
* Only count leafs what would be blocked
2024-05-22 19:46:41 -07:00
Tim Wilkinson
fbaa54bb23
Avoid cutting off leaf nodes ( #1211 )
...
* Avoid cutting off leaf nodes
* Use OLSR broadcast with pending nodes
2024-05-21 21:02:58 -07:00
Tim Wilkinson
2235d3229c
Fix dns alias validation pattern to allow wildcard DNS again. ( #1203 )
2024-05-14 22:39:47 -07:00
Tim Wilkinson
7536b66aca
Fix quality error messages ( #1202 )
...
* Handle null snr and qualities
* Fix quality message
2024-05-14 16:02:00 -07:00
Paul K3PGM
650e26667c
Improvements and fixes for Advanced DHCP Options ( #1197 )
...
- The "Always" checkbox now works for options with an explicit tag, and
is disabled for untagged options; the latter cannot be supported because
of a limitation in the OpwnWRT configuration language.
- Tagging by host name has been removed; it didn't work before and isn't
particularly useful in the AREDN context.
- Tagging by Agent Circuit ID, Agent Remote ID, and Subscriber-ID are
now supported so that a DHCP Relay Agent can be used to extend the LAN
across multiple subnets.
- Small improvements were made to error handling and hints.
2024-05-14 09:46:25 -07:00
Tim Wilkinson
7c4892d23f
More LQM quality tracking improvements. ( #1196 )
2024-05-12 22:10:53 -07:00
Tim Wilkinson
2454accbb5
Fix various status information errors ( #1195 )
...
* Fix various status information errors
* Fix whitespace
2024-05-12 14:53:37 -07:00
Tim Wilkinson
8bb01e0501
LQM improvements. ( #1193 )
...
Matched with changes in aredn_packages
2024-05-11 23:03:29 -07:00
Tim Wilkinson
4b13d5969f
Move manager logs into syslog ( #1190 )
2024-05-05 23:11:57 -07:00
Tim Wilkinson
b452ba20e7
Make sure dmz_dhcp_end has a value, even in NAT mode ( #1163 )
2024-04-16 16:28:46 -07:00
Tim Wilkinson
86271040a0
Scan cache ( #1160 )
...
* Cache the last wifi scan and update it when a re-scan is requested.
This change was suggested as a way of handling Ubiquiti AC devices
which disconnect while scanning and making retrieving the results
problematic if that was your connection. Now we scan and store the
results so they can be retrieved later. In fact we no longer scan when
navigating to this page but require an explicity scan button push.
This make the page generally more responsive when initially navigated
to.
2024-04-10 18:30:29 -04:00
Paul K3PGM
9dafffa152
Show progress bar during reboot/reflash and show estimated time remaining in MM:SS. ( #1156 )
...
* Reboot/reflash progress bar, time remaining in MM:SS
When rebooting or reflashing the node, display a progress bar as
well as the estimated time remaining. Also show the time remaining
in MM:SS format.
* Fix indentation error.
* Minor changes to improve browser compatibility.
2024-04-07 16:04:00 -04:00
Tim Wilkinson
0dba2661c3
Improve the reboot/flash timers ( #1155 )
...
During the initial setup the IP address of the node can move
around a fair bit. Make sure the reboot timeout code handles this.
2024-04-04 12:10:58 -07:00
Tim Wilkinson
e51fedc394
Use 192.168.1.1 when flashing while on ramdisk ( #1154 )
2024-04-03 15:29:15 -07:00
Tim Wilkinson
d8b85d5b4a
Fix library requires ( #1147 )
...
* Another attempt to stop the mesh page from being truncated sometimes
* Fix originator
* Fix the require(...) libraries
2024-04-01 22:15:45 -07:00
Tim Wilkinson
9b89db7a7f
Fix missing hosts on mesh page ( #1146 )
...
* Another attempt to stop the mesh page from being truncated sometimes
* Fix originator
2024-04-01 22:14:49 -07:00
Tim Wilkinson
d8c29d60e9
Use per-page scan rather than per node ( #1145 )
...
Similar fix that was recently added to the mesh page
2024-03-31 22:14:49 -07:00
Tim Wilkinson
c77a63eca3
Ubiquiti AC wifi scan fix ( #1144 )
...
If we disconnect then reconnect the radio then the wifi scan on the Ubiquiti AC
will work for a short while.
2024-03-31 22:13:42 -07:00
Tim Wilkinson
dae38b1611
Eliminate displaying multiple copies of previous neighbors ( #1143 )
2024-03-31 14:18:38 -07:00
Tim Wilkinson
466b8bd3c2
Chrome layout fixes ( #1141 )
...
* Layout tweaks for Chrome
* Better fixed antenna ui
2024-03-29 18:32:36 -07:00
Tim Wilkinson
5c90a1c09f
Tweak setup page layout ( #1139 )
...
* Tweak setup page layout
* Move map
2024-03-29 15:42:00 -07:00
Tim Wilkinson
7fbc89e797
Fix black on black text on tunnel page ( #1138 )
2024-03-29 13:02:52 -07:00
Tim Wilkinson
c7f79de97a
Add aux antenna support ( #1136 )
2024-03-29 12:25:04 -07:00
Tim Wilkinson
5c279f16e0
Add a countdown timer for reboots and updates ( #1137 )
2024-03-29 12:24:55 -07:00
Tim Wilkinson
bca1ed4be4
Rewrite iperf to make it more reliable ( #1135 )
...
* Improve iperf
* Try to improve iperf reliability
* Try to improve iperf reliability
* Rewrite
2024-03-28 23:01:59 -07:00
Tim Wilkinson
4337fc6393
Fix display of previous neighbors ( #1133 )
2024-03-28 15:43:09 -07:00
Tim Wilkinson
8b6339a099
Use adaptive reload mechanism when node upgrades or reboots ( #1121 )
2024-03-25 19:52:27 -07:00
Tim Wilkinson
08226ca8d0
Make auto mesh reloading per browser rather then per node ( #1122 )
2024-03-25 19:52:16 -07:00
Tim Wilkinson
dea10f2f8e
Lime on Black style ( #1123 )
2024-03-25 19:52:06 -07:00
Tim Wilkinson
d517e4f6c8
Fix Bad Gateway when rebooting from tunnel pages ( #1120 )
2024-03-24 23:34:19 -07:00
Tim Wilkinson
b1c85fa281
Improve speed of search ( #1117 )
...
* Stop searching empty fields
* Cache searchable fields to speed up future searches
2024-03-22 17:49:59 -07:00
Tim Wilkinson
43a4940032
Improve mesh page searching ( #1115 )
...
* Improve layout so we can improve search
* Fixes
* Use thead for table header
2024-03-15 08:43:43 -07:00
Tim Wilkinson
811743a7ac
Add <1 mile if distance to node is known but small. ( #1114 )
...
Handle kilometers
2024-03-13 18:18:24 -07:00