Commit Graph

10 Commits

Author SHA1 Message Date
Joe AE6XE 903f92801c
aredn: update to openwrt v19.07.10 and patch refresh (#342) 04/24/2022 2022-04-24 17:14:10 -05:00
Joe Ayers ae593838bb aredn: upgrade to Openwrt 19.07.0 release
Co-authored-by: Andrew KK4ZUZ <apcameron@softhome.net>

This commit begins the process to migrate from ar71xx to
ath79 target images.
2020-01-29 07:39:05 -08:00
apcameron 5eedf421da ar71xx: add Support for the TP-LINK WBS510 V2
This adds support for a popular low-cost 5GHz N based AP

Specifications:
- SoC: Atheros AR9344
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
- Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
2019-11-23 09:17:05 -08:00
Joe Ayers d8f9320021 aredn: add GL-iNet AR750 definitions 2019-05-26 16:24:39 -07:00
ZL2WRW 1a43b07293 Add experimental support for the GL.iNet GL-AR150 (#407)
* Add experimental support for the GL.iNet GL-AR150 - https://openwrt.org/toh/gl.inet/gl-ar150
Mesh networking and tunneling have been confirmed working.
This device has been confirmed capable of operating on channel -1, but /etc/config/wireless has to be manually edited to select this channel.

* www/cgi-bin/perlfunc.pm patched to add UI support for the GL.iNet GL-AR150

* www/cgi-bin/perlfunc.pm patched to add UI support for the GL.iNet GL-AR150 - seems like only 18 dBm TX power is possible

* Remove Experimental comments and designate as stable

* Configure Ethernet ports & VLANs for GL-AR150, and update README.md

* Fix misunderstanding re README.md

* Patch Upstream OpenWRT GL-AR150 LAN & WAN LED mapping, configure WLAN LED as mesh linked indicator.
2019-04-30 20:55:09 -05:00
Joe Ayers bb818a9539 build: upgrade to OpenWrt 18.06.2 and refresh patches 2019-02-06 20:31:10 -08:00
Joe AE6XE 123949de9e
aredn: Standardize Ethernet Port vlans for UBNT XM devices (#297)
The secondary port on Ubnt XM devices was non-functional.
Enabled bridge type in network config to utilize both ports.
2018-12-02 17:52:48 -08:00
Joe AE6XE a62fe95b26
aredn: hAP ac lite enable 5GHz LAN Access Point (#287)
* aredn: hAP ac lite enable 5GHz LAN Access Point

enable ability to bridge LAN physical ports with wireless
LAN Access Point capability. On dual band hAP ac lite,
used in parallel with mesh RF on 2GHz.  Enables future
features on single band devices to turn off mesh RF and
repurposed for mesh LAN Access Point.

closes: #215
2018-11-27 21:37:59 -08:00
Joe AE6XE 859279aaae bugfix: AREDN standard port vlan function on NS XW devices
The NanoStation M2 and M5 XW switch configuraiton had LAN
on primary port (untagged) and DtDLink and WAN (vlan 1 and 2)
on secondary port. This change enables untagged, vlan 1,
and vlan 2 on primary port to function.  This configuration
also functions on the secondary port.  However, devices on
the same network can not communicate with one another across
the two ports. Although, access works from the greater mesh
and the node to devices on both ports on the same network.
When using one port the behavior is now consitent with all
other AREDN devices. The use of both ports offers some
benefit, but with the above limitations.
2018-11-14 19:01:23 -08:00
Joe AE6XE 0bd057ed40 aredn: phase 1 support for Mikrotik rb952Ui-5ac2nD
Add support for the hAP lite model rb952UI-5ac2nD equivilent to
the UBNT AirRouter.  The 5Ghz interface will be configured in a
2nd phase.  This hAP lite model has double the RAM and Flash
of the AR.  the 2Ghz is MIMO (5Ghz is single antenna).
2018-09-03 23:26:56 -07:00