Commit Graph

76 Commits

Author SHA1 Message Date
apcameron 9d60516176 ar71xx: Add Support for the TP-LINK CPE220 V3.0 Device
Installation:
     Flash factory image through stock firmware WEB UI
     or through TFTP
     To get to TFTP recovery just hold reset button while powering on for
     around 4-5 seconds and release.
     Rename factory image to recovery.bin
     Stock TFTP server IP:192.168.0.100
     Stock device TFTP adress:192.168.0.254
2018-12-05 19:38:46 -08:00
apcameron 6982757c79 ar71xx: Add Support for the TP-LINK CPE610 V1.0 Device
Installation:
 Flash factory image through stock firmware WEB UI
 or through TFTP
 To get to TFTP recovery just hold reset button while powering on for
 around 4-5 seconds and release.
 Rename factory image to recovery.bin
 Stock TFTP server IP:192.168.0.100
 Stock device TFTP adress:192.168.0.254
2018-12-03 19:25:48 -08:00
Joe Ayers 483b138b3a Revert "uhttpd: serve precompressed files"
This reverts commit f06202160b.
2018-11-23 18:41:18 -08:00
Adrian Kotelba f06202160b uhttpd: serve precompressed files
The aredn project benefits from precompressed files given
mesh nodes are typically long distant RF links and UI
is accessed remotely.  uhttpd will look for the filename
requested first, then if not found, look for filename.gz
and update content header passed back as appropriate.

https://patchwork.ozlabs.org/patch/514918/
2018-11-21 21:32:28 -08:00
Joe Ayers 382f8a7db1 aredn: enable nano-m-xw switch to be a dumb switch
Config the NanoStation M2/M5 XW devices to be fully
functional with a standard aredn port definition.
The vlans are not configured in the switch, rather
acting like a dumb swtich, enabling tagged and untagged
packets to exist on the same switch port at the same time.
This commit enables the ports on the switch to directly
send all traffic to all other ports when not configured
directly in vlan mode.
2018-11-21 16:44:25 -08:00
Joe AE6XE 355e34080f aredn: Add definitions for Mikrotik LHG-5HPnD-XL 2018-11-17 10:40:33 -08:00
apcameron 700f020e25 ar71xx: add TP-LINK CPE210 V3.0 and CPE510 V2.0 profiles
Adds a separate profile and binary for both devices.
fixes #221
2018-11-05 22:28:03 -08:00
Robert Marko edfb8370f4 mtd: spi-nor: Add Winbond w25q128jv support 2018-09-13 19:30:15 -07:00
Joe AE6XE 0bd057ed40 aredn: phase 1 support for Mikrotik rb952Ui-5ac2nD
Add support for the hAP lite model rb952UI-5ac2nD equivilent to
the UBNT AirRouter.  The 5Ghz interface will be configured in a
2nd phase.  This hAP lite model has double the RAM and Flash
of the AR.  the 2Ghz is MIMO (5Ghz is single antenna).
2018-09-03 23:26:56 -07:00
Joe AE6XE 7d0d258af7 aredn: bump to OpenWrt 18.06.1 2018-08-29 20:28:51 -07:00
Daniel Golle 69813a57ca kernel: re-add patch for AT8032 Ethernet PHY
The patch was wrongly removed by a kernel version bump to 4.9.106 in
the believe that it was merged upstream thow it wasn't. This lead to
unrecoverable link losses on devices which use those PHYs such as
many ubnt single-port CPEs.

Fixes: 6f8eb1b50f ("kernel: bump 4.9 to 4.9.106 for 18.06")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit a497e47762)
2018-08-12 17:22:26 -07:00
dman776 433a943579
build: fix luasrcdiet-luci Makefile (#118) 2018-08-08 13:10:56 -05:00
Eric 52a8b79f98 Trim Packages (#96)
Closes #81 

* Trim Packages

Kernel support for USB has been moved to modules
libpcap and tcpdump have been moved to modules
libnetsnmp and snmpd have been moved to modules
IPv6 has been removed from the kernel
IPv6 support has been removed from busybox network utils as well.
(no more funny DNS responses in nslookup!)

* Remove ping6 and traceroute6

They are no longer needed

* Changed patch name and number and updated series file
2018-08-02 15:53:20 -05:00
apcameron 014217aa6b ar71xx: Add Support for the TP-LINK CPE210 V3.0 Device
This Device is almost the same as the CPE210 V2.0
Once Support for the TP-LINK CPE210 V3.0 gets added to the OpenWrt code we
will need to drop the patch 001-add_support_for_TP-Link_CPE210_v3.patch
2018-07-21 14:33:26 -08:00
apcameron 0d95d4d708 ar71xx: Add Support for the TP-LINK CPE510 V2.0 Device
Once the PR for this is accepted by Openwrt we will need to remove the file
001-add_support_for_TP-Link_CPE510_v2.patch

Removed 001-add_support_for_TP-Link_CPE210_v2.patch as PR #937 has been committed

Updated 99_setup_aredn_include to remove unused Rssi Led configuration
2018-07-04 18:17:14 -07:00
Joe AE6XE 1bebbc3257 aredn: iperf fw rules and fw restart on pkg install
Port iperf fw rules and fw restart on pkg install to
new build structure
2018-07-01 20:20:26 -05:00
apcameron 9fd3f30934 ar71xx: Add Support for the TP-LINK CPE210 V2.0 Device
Once Support for the TP-LINK CPE210 V2.0 gets added to the OpenWrt code we will need to drop the patch 001-add_support_for_TP-Link_CPE210_v2.patch
2018-05-15 21:20:44 -07:00
Joe AE6XE 68c1ba7fa9 bugfix: ubnt uboot firmware check fails via tftp
newer versions of Ubiquiti uboot constrain
the firmware header version sting. Current
openwrt formated versioning results in a
uboot firmware check error
2018-05-13 23:11:51 -05:00
Joe AE6XE d33df3dab7 aredn: define vlans for aredn devices (#7)
aredn devices configured with lan, wan, and dtdlink
networks.
2018-05-03 00:07:55 -05:00
Andrew Cameron 01b30a4c63 aredn: port ar71xx_board_name 2018-03-31 21:26:49 -07:00
Joe AE6XE 5d09d7e005 aredn: port customized MeshNode SSID 2018-03-31 08:51:01 -07:00
Joe AE6XE 8dad202d0e aredn: update and port customized banner 2018-03-31 08:43:39 -07:00
Andrew Cameron 2626060908 busybox: port AREDN usage of telnet from 3.16.1.1 2018-03-31 08:42:36 -07:00
Andrew Cameron 31dbc2c552 bugfix: enable dnsmasq in 18.01.x 2018-03-31 08:36:14 -07:00
Andrew Cameron 714fb257c5 aredn: port part97 extended spectrum to openwrt 18.01.x
This commit requires US FCC Part 97 licensing
or equivilent in your country.  Ported from
AREDN 3.16.1.1 release
2018-03-30 15:41:44 -07:00
Joe AE6XE 91ee8671b6 build: create top level make structure 2018-03-23 00:39:07 -07:00