Commit Graph

162 Commits

Author SHA1 Message Date
Tim Wilkinson 1bafc35ded
Dont run iwinfo if we have no wifi (#1064) 2024-01-13 23:35:29 -08:00
Tim Wilkinson 8f5e87eb11
Fix display of ntp update when it changes (#1031) 2023-12-18 16:48:02 -08:00
Tim Wilkinson 7e9137417e
Display all the antenna information on the front page (#1028) 2023-12-17 21:33:27 -08:00
Tim Wilkinson cc5c7cafd0
Make sure switching wifi modes forces a reboot. (#1027)
Because some hardware doesnt handle this well.
2023-12-17 21:14:38 -08:00
Tim Wilkinson 14494a477f
Add missing Request class to luci.http (#1026)
This was removed in the latest OpenWRT but we still use it.
Original plan was to just provide the old http (as ohttp) along
side but too many third-party apps also need this.
2023-12-17 16:20:41 -08:00
Tim Wilkinson 4120914a60
Improve node setup (#996)
* Reworking the node-setup system - less reboots when changing configuration

* Add restart-services to advnet
2023-12-12 20:01:23 -08:00
Tim Wilkinson aae5e14655
Add azimuth, elevation and antenna information (#979)
* Support antenna selection and allow heading to be specified

* More antennas

* Heading -> Azimuth

* Ubiquiti's catalog

* Add Mikrotik builtin antennas

* Some Ubiquiti builtins

* JP Performance Antennas

* Added Altelix

* More Altelix

* More radios

* Add elevation

* Add generic omnis, sectors and dishes

* Improve selection

* Improve display for non-wireless devices

* Improve omni and builtin setup

* mode -> model typo in antennas.json

* Typos

* Fix bad gateway when saving

* Add antenna height above ground level.
Fix more bad gateways

* Update antennas.json

* More radio antennas

* More antennas
2023-12-06 12:30:23 -08:00
Tim Wilkinson 44f7f43abb
More map fixes (#982)
* Migrate map (again)

* Improve map navigation
2023-12-06 12:17:39 -08:00
Tim Wilkinson 475f371bb8
Initial OpenWRT 23.05.0 merge (#963)
* Initial OpenWRT 23.05.0 merge

* Fix get_rfchannels for new iwinfo format

* Fix initial wlan name

* Move patches to 5.15 from 5.10

* Fix flash write problem on Ubiquiti devices

* Use new ssl patch

* Reduce binary sizes

* Have to have hostapd installed now, even on tiny builds

* Simplify device support

* Revert Mikrotik NAND sysupgrade system.
OpenWRT doesnt really support Mikrotik NAND devices after 2019 and the
new support appeared broken. So reverted to the 2022 mechanism which does
work and avoid upgrade problems.

* Fixes for tiny builds

* More tiny shrinking

* Fix newly added firewall rules

* Update permanent packages

* Update permanent packages

* Support for Nanobeam 2AC (2.4GHz) device. 20MHz channels only.

* Update support

* Add GL.iNet B1300

* Add to radios.json

* Update supported devices

* Dont force the LAN DHCP to run

* Revert CURL SSL test

* Fix radio count when there are no radios

* Switch the lan ports on the gl-b1300

* Add support for GL.iNET Beryl MT1300

* Fix visual lat/lon setting bug

* Make the setup "Save Changes" button also save the location data

* Fix location/map system with geo location fallback

* Recolor

* Fix default bandwidth selection

* Support multi-band radios

* Generic mechanism to set compat version to 1.1

* Switch ethernet ports

* 20 MHz channels only

* Update docs

* Add ham channels to Mediatek chips (20MHz only)

* Automatically update the permpkg list when we upgrade

* Fix 10MHz mode for Ubiquiti AC devices

* Fix tiny builds

* Bump the watch timeout for restarting olsrd
olsrd is reliable these days, and very occasionally this
was restarting it unnecessarily
2023-12-06 10:12:11 -08:00
Tim Wilkinson 6754330ae6
Correctly set wifi wan mode when depending on the mesh wifi setting (#925) 2023-09-04 22:30:58 -07:00
Tim Wilkinson f3af8eee30
Tolerate missing frequency list (#907) 2023-07-21 13:59:15 -07:00
Tim Wilkinson 60a2627989
More multi-radio support (#860)
* Multi-radio: Support different powers for different radios
* Use arrays for powers
* Update APIs to take wifi interface
2023-06-02 18:47:34 -07:00
Tim Wilkinson ab541c3d35
Fix disabled mesh on multi-wifi devices (#852) 2023-05-27 17:58:10 -07:00
Tim Wilkinson 4e621baf0b
Support switching mesh radio on multi-radio devices (#847) 2023-05-25 21:27:59 -07:00
Tim Wilkinson eb90661eac
Fix wifi setup for multi-radio devices (#827)
Disable/enabling mesh wifi on multi-radio devices could confuse the
allocation of the radios to specific tasks
2023-05-08 22:31:10 -07:00
Tim Wilkinson 3863207c5a
Virtualized X86 support (#807) - 4/28/2023
* x86 configs

* Update for new update system

* Build support

* Handle nowifi on status page
2023-04-28 11:01:58 -07:00
Tim Wilkinson deeacc2cc2
Restructure, modularize and tidy the navigation buttons and menus (#805)
* Make admin and user bar menus pluggable

* Realign header block to stop is moving around

* Remove ref

* Use modular nav to disable ineligable options during initial install

* Dont offer tunnel menus options when no tunnel daemon installed.
This is for low-memory devices

* Simplify

* Improve messaging when running ram image

* Disable rather than hide vpn menu items on tiny memory devices

* Move menu navs
2023-04-25 20:07:19 -07:00
Tim Wilkinson 8711afa9ca
Remove hardwired frequency tables and use information from the hardware (#801)
* Remove hard coded channel tables
* Reduce radios.json to only what's needed
* Update radios
* Improve unsupported device handling
2023-04-22 03:24:20 -10:00
Tim Wilkinson e284ff98e2 Move the unconfigued setup earlier
Fixes bad band label display on first boot
2023-02-21 17:46:43 -08:00
Tim Wilkinson 4763c4d149 Fix AP mode selection when turning mesh back on. 2023-02-20 12:05:39 -08:00
ab7pa 072c3da550 remove WAN Wifi Client key lower limit 2023-02-20 09:25:35 -08:00
Tim Wilkinson 68f242512b More fixes for AP mode
AP radio isn't always phy1 so handle these cases.
Add in some labels to RF and AP for which bands are in use.
2023-02-19 08:18:32 -08:00
Tim Wilkinson 741becfefa
Improve AP band selection. (#718) 2023-02-17 20:58:51 -08:00
ab7pa 89500f6c2d add extended channels to LAN AP list 2023-02-14 21:44:39 -08:00
Tim Wilkinson 9293de42a7
Improve meshref conflict check which could be triggered even when no wifi is enabled (#599) 2022-12-27 20:06:30 -06:00
Tim Wilkinson 6950479bf1
Update AREDN to OpenWRT 22.3.2 (Major Upgrade) (#574)
* Update to Openwrt 21.02 and add support for the CPE710 v1
Update scripts to change references to ifname to device due to a change in Openwrt naming
reverse-wpad-basic-wolfssl and disable SSL on Curl

NOTE: The compile host must have python3-distutils installed for gpsd to build

* aredn: initial working upgrade to openwrt 21.02.1

* aredn: update 1 to working upgrade to openwrt 21.02.1

* aredn: add cpe710v1 to build config

* Andrew's patches

* Remove duplicates + display perl

* Temp disable wifi extension patch

* ifname/ports support

* Add spectrum patch back in

* Generic function to extra interfaces

* New api to get wifi ifname

* Disables jails

* Style link

* aredn: partial upgrade to openwrt 22.0.3.0

added AC device images and partial migration to 22.0.3.0
firewall upgrade pending

* aredn:  update mesh-release and revert config.mk

* Unused

* NFT firewall rewrite

* Common-isze configs

* Fix network layout for hap2

* Use local packages dev (new firewall rules)

* Add HAP2

* Add pause after network restart to let bridge reinitialize

* Various lua fixes for new lua version

* Tweak config

* Re-fix networking (lost patch change)

* Add new radio names

* Tolerate missing wifi

* Fix hap-lite switch setup

* More devices

* New radio id

* Build Rocket 5AC lite

* Remove need for luci.sys

* Remove need for luci.sys

* Explicitly name wlan interfaces

* Handle different compatibility verisoning

* Update networking for switches

* ipref version bump

* Extra flag for curl

* Better compat_version fix

* Remove wolfssl

* Fix dns server

* Fix device name

* Unused

* Remove things we dont need

* Remove unused packages

* Generic macaddr overrides

* Fix uci commit

* Fix luci.template.parser to avoid luci.http loading the real thing

* Rocket-M build

* Add search-domain dhcp option

* Turn of ipv6

* No IPV6 in dnsmasq

* Override mac addresses if devices all  the same

* Working from master (for now)

* Put back hostap

* Disable old ethmac fixup

* Tweak configs

* Move back to v22.03.2
Leave ipq4019 builds to master

* Need IPV6 to compile nft firewall

* Rocket-M fixes

* Before we start

* WIP

* Working snapshot

* Cleaned patches

* Merged patch

* Single patch to support HAP2

* Fix typo

* Add nanostation-m

* 5/10Mhz patch

* 5+10MHz patch for ath10k-ct driver

* Extend 2Ghz channel check to include -4 to -1

* Add chanbw setup for ath10k (like ath9k)

* Added TP-Link CPE710 v1

* Override firmwares

* Missing patch

* Dropbear config like 3.22.8.0

* Add Ubiquiti Rocket 5AC Lite

* Fix c6

* Update

* Need more scan channels

* Remove IPV6

* Improve mac fixups

* Put back missing nft app

* IPv6 removed so dont have to disable it

* Fix rocket-m flash bug

* Fix nanostation-m

* Nanobridge is tiny

* Fix wifi order for ar750

* Rocket M5 XW support

* New rates

* Fix firewall4 so we don't need IPv6

* Allow channel width to be restricted

* Move channel list into library

* Fix naming

* Mechanism to block specific channels on specific radios

* Refresh buttons

* routerboard-sxt-5nd

* CPE605 v1.0

* Improve rocket m xw

* tpink

* Update patch

* Update to remove disable

* Remove BW restrictions on cpe710

* Restrict to what has been tested

* Remove test BW restrictions

* sxtsq-5-ac

* Update

* Update

* powerbeam-m5-300 support

* Fix

* Fix hap2

* Tidy unused patches

* Remove limit

* Add ubnt_bullet-m-ar7241

* Added ubnt_nanobeam-ac-gen2

* Fix typo

* Tolerate missing dtd ip

* Explicitly gix hap2 mac addresses

* Fix some broken patches

* Hap2 wont work at 5MHz

* Ubiquiti LiteBeam 5AC Gen2

* Fix compat_version for sxt 5ac

* Update patch

* Unused

* Fix lan configuration for some devices

* Rolling average of noise level

* Unused

* Split out the ath10k rssi monitor (its very simple at the moment)

* Ignore .DS_Store

* Reboot if ethernet doesnt come up (but only once!)

* reboot returns - add exit

* Add some logging info

* Fix ]

* Check all possibly ethernet bridges

* Improve mac fixing

* Remove HostAP on small memory devices

* Reduce dropbear footprint

* Add setsid

* Kill hostap when upgrading to save memory

* Different way to detect hostapd unavailable

* New build steps

* Improve manager logging

* Fix name conflict for the two monitors

* Try to improve test mesh name resolve problem

* Migrate tiny to generic (tiny doesnt work properly)

* Typo

* Another attempt to fix macs for Mikrotik

* Protect against missing trackers

* Fix wpad for ipq40xx

* Remove old tunnel check code

* Enable ZRAM swap to aid low memory devices

* ath10k noise can something be out of range - protect against that

* Updated with current devices and status

* Update firmware which has been tested

* Updated with more builds

* More binary/README

* Fix css error

* Start noise at sensible base level

* Unfix the css so it looks how it use to.

* Save as much memory as we can on lowmem nodes

* Hide some options on low memory devices

* Add "eol" to 32MB devices

* Restart network rather than reboot node if it seems to be broken

* Fixes

* Revert network reset

* Fix ar750 networking

* Continue to trim tiny configs

* More devices

* Dump IW output messages

* Fix Rocket 5AC intermittent ethernet issue

* Ethernet fix for PowerBeam 5AC 500

* More tiny size reduction

* More support data

* Fixed POE and USB power features

* Add Ubiquiti NanoBeam AC (gen1)

* NanoStation (not NanoBeam)

* Add mii-tool package

* Device updates

* Bump update time to 5 minutes

* Fix ethernet negotiation for rocker-5ac and nanobeam

* Fix iplookup

* Config changes based on call feedback

* Radio listing fixes

* Update with more untested builds

* Fallback TxMbps extracted from iw station dump

* Fix tunnel detection for low memory nodes

* Remove unused feed packages

* snapshot build

* Update stability info

* Add powerbeam-5ac-500

* Typo

* Add missing 3.22.1.0

* Add MikroTik LHG 5 AC

* Fix permissions

* Fix permissions

* AirGrid's take Bullet builds

* Mikrotik AC3

* Improve supportdata structure a little to make it easier to find things

* Restore WAN VLAN overrides

* Fix vlan regex for hap2 and hap3

* Support old and new style poe controls

* hap-ac3 is version 1.1

* Handle typo in some openwrt config files

* Fix HAP AC3 install

* Update hap ac3 status

* Support user overrides for network ports (non-swconfig devices)

* LHG 5AC support

* Remove -nand

* Remove non-working platform.sh change

* tunnel weight override

* Omit LinkQualityMult when value is 1

* Add mANTBox 19s and 15s

* Support ath79 mikrotik devices which require ath10k in the initramfs

Co-authored-by: apcameron <apcameron@softhome.net>
Co-authored-by: Joe AE6XE <ae6xe@arrl.net>
Co-authored-by: Joe Ayers <joe@arrl.net>
2022-12-22 14:22:49 -06:00
Tim Wilkinson e9acf4928b
Check /etc/config/vtun exists (#561) 2022-12-10 08:51:26 -06:00
Steve 73ca16b17d
update vtun name when changing nodename (#557)
* update vtun name when changing nodename

* Update files/www/cgi-bin/setup

Co-authored-by: Tim Wilkinson <tim.wilkinson@me.com>

* Update files/www/cgi-bin/setup

Co-authored-by: Tim Wilkinson <tim.wilkinson@me.com>

Co-authored-by: Tim Wilkinson <tim.wilkinson@me.com>
2022-12-06 14:24:44 -06:00
Steve 133ab928b5
give cleaner lines to the setup table (#541) 2022-11-01 09:48:48 -05:00
Steve 10bedbaf48
fix retrieval of ntp_period (#517) 2022-10-11 09:14:46 -05:00
Steve 72572034be
add ntp update period to basic setup page (#510)
* add ntp update period to basic setup page

* ensure current value as selected

* include case where reverts to daily after upgrade

* persist ntp_period across upgrades
2022-10-02 18:46:57 -05:00
Tim Wilkinson 3f89bb4290
Fix bad match for NAT dhcp address. (#500) 2022-09-06 09:57:06 -05:00
Steve b6a4ee6bb2
add units to setup and advconf pages (#499) 2022-09-04 11:05:54 -05:00
Tim Wilkinson e1ddbabb85 Migrate LAN-to-WAN options to advance configuration 2022-08-15 11:16:24 -07:00
Tim Wilkinson 102c4112c0
Prefix 'WiFi' to WAN address when WiFi wan is enabled (#470) 2022-08-02 18:57:44 -05:00
Tim Wilkinson c3a317d424
Provide status about state of wan wifi connection (#472)
* Provide status about state of wan wifi connection

* Updated icons

* One more icon
2022-08-02 18:56:27 -05:00
Tim Wilkinson 47fc5f78ef
Password visible toggle (#469)
* Add toggle to show password fields

* Fix permissions
2022-08-02 18:55:08 -05:00
Paul K3PGM b859a79127
Fully validate node and tactical names; give better messages when invalid. (#450) 2022-07-22 18:49:58 -05:00
Tim Wilkinson 9993244143 Fix issues with tactical names 2022-07-21 15:15:47 -07:00
Tim Wilkinson f0bfad55d0 wifi_chanbw should always be a string 2022-07-21 15:15:05 -07:00
Tim Wilkinson 79a63e8ad8
Default DHCP limits in NAT mode if fields are blank (#430) 2022-07-13 16:19:24 -05:00
dman776 2e09886d4b
Fix tacticalname (#426)
* fix tactical node names fixes#420

* make / optional

* revert last change
2022-07-13 16:18:08 -05:00
Steve Lewis AB7PA 4e6b68c612 allow zero length wan wifi client passphrase 2022-06-30 08:55:41 -07:00
Steve AB7PA 480185bd0b
set default non-nil values on setup (#417) 2022-06-29 15:45:54 -05:00
Tim Wilkinson b006c1040a Stop map update claiming success when it actually fails 2022-06-23 14:46:15 -07:00
Tim Wilkinson ad441ba600 Fix error when re-enabling wifi mesh with lqm on 2022-06-17 14:27:48 -07:00
Tim Wilkinson 0a6f4a7a48 Missing channels -4 and -3 2022-06-08 11:45:03 -07:00
Tim Wilkinson 40fb320290 Fix 5GHz AP bad channel dropdown 2022-06-07 21:49:30 -07:00
Steve AB7PA 2fb911948a
update the onboard node help file (#367) 2022-05-23 07:45:16 -05:00
Tim Wilkinson b23ab5ee8a
Link Quality Management (#360)
* Link Quality Management experiment (built in)

* Protect LQM pages

* Omit "empty" mac addresses

* Integrate LQM v0.2
Includes proposed UI if this were built-in.
When LQM is enabled (advanced settings) the usual distance inputs are
replaced with "min snr' and "max distance" inputs which are the major
ones you might tweak, as well as a link to the LQM status page.
Other controls are now available (so protected) in advanced settings.

* Improve LQM updating

* Use running snr averages

* Merge app changes

* AREDN-ize the UI

* Improve status language

* Improved DtD detection

* Improve quality reporting

* Link Quality category

* Enable by default

* Better intergration

* Link => Neighbor

* Formatting

* Make sure initial page is populated without extra fetch

* Handle empty lqm.info

* Update with latest experiment algorithm changes

* Validate LQM settings before applying them

* Algorithm updates

* Improve quality reporting

* %% -> %

* Default max distance now 50 miles

* Get actual noise if radio will provide it

* low_snr => min_snr

* Dont print node description if we dont have one

* Remove properties duplicated from setup page

* Localize max distance. Miles in GB and US, Kilometers everywhere else.

* Ping link quality testing

* UDP 'ping' for quality check

* Change Active Settings title

* Expand ping test

* Improve messaging

* Add a ping penalty for neighbors which cannot be contacted in a timely manner.

* Remove user_blocks config option. No one needs to use this anymore.

* Localize distances on lqm page

* Improve status reporting

* First run emergency node setup.
When a node first runs LQM, if the default settings fail to connect to
a node we will now adjust them so that at least one node is viable.

* Restore blocking of mac addresses

* LQM now off by default
fixed #47
2022-05-18 12:49:00 -05:00