Commit Graph

1361 Commits

Author SHA1 Message Date
Conrad Lara - KG6JEI 8975c46c67 bugfix: TPLink and similar, fix port_map led mapping 2015-07-02 20:30:27 -07:00
Conrad Lara - KG6JEI 6b404c27ff bugfix: move set eth mac fixup to /etc/init.d/local
Not getting much debug information at moment, would like to put this in uci-defaults but with issues that I can't seem to log at moment (and not having serial cable for this device) I'm going with lets put it in /etc/init.d/local before nvram and similar gets set.

ref AREDN->ticket:115
2015-07-02 19:03:47 -07:00
Conrad Lara - KG6JEI c4c808f98c Merge branch 'FixupRefDMZLed' into release-3.15.1.0
Remove references to DMZ led and replace with "Status 4" led
2015-07-01 23:25:56 -07:00
Conrad Lara - KG6JEI 55ec5d6dc1 bugfix: change ref to DMZ Led to Status 4 led in help.html 2015-07-01 23:25:22 -07:00
AE6XE 8e0943f8e0 bugfix: Pull dtdlink and tunnel from remote connections display.
Due to issues we are pulling the showing of tunnels untill we can better detect them.

We are also pulling dtdlink as all AREDN nodes should have dtdlink enabled.
2015-07-01 23:21:51 -07:00
AE6XE 305dbb143e bugfix: ".local.mesh" being added to already qualified domain names.
fixes AREDN->ticket:127
2015-07-01 23:10:13 -07:00
Conrad Lara - KG6JEI 2482af260c bugfix: re-work the mac change code.
Old code would set mac on the sub-vlan not the master interface which could cause issues.

Rework to be more functional in the future and to work correctly on vlan interfaces.

ref AREDN->ticket:115
2015-07-01 23:03:01 -07:00
Conrad Lara - KG6JEI a46bbf27d8 bugfix: sometimes iw doesn't show noise floor
Pull from kernel debug instead for now untill we can work around it in iw.

fixes AREDN->ticket:129
2015-07-01 10:05:58 -07:00
Conrad Lara - KG6JEI 794c00c7c6 bugfix: "wifi" network isn't yet defined during firstboot so hard code interface names to eth0 and wlan0
ref AREDN->ticket:115
2015-06-30 22:17:45 -07:00
Conrad Lara - KG6JEI 13db1b02a2 bugfix: Remove ref to DMZ Led on first node reboot 2015-06-30 08:36:45 -07:00
Conrad Lara - KG6JEI 28d5b160c1 Merge branch 'FixupSNR' into release-3.15.1.0
fixes AREDN->ticket:129
2015-06-30 00:08:21 -07:00
Conrad Lara - KG6JEI 39729157c6 bugfix: Signal levels do not show up on "new extended" RF Channels
Switch to iw over iwinfo because it handles the new channels better.

Partially reverts changeset:808a8d5019fce4a7ca2c027ea7838d43c6d8cad0/aredn_ar71xx

fixes AREDN->ticket:129
2015-06-30 00:05:45 -07:00
Conrad Lara - KG6JEI 4816a47751 Merge branch 'FixupDuplicateMAC' into release-3.15.1.0
ref AREDN🎫115
2015-06-29 23:00:43 -07:00
Conrad Lara - KG6JEI 7985ff6ba3 bugfix: deal with duplicate MAC on LAN and WIFI
ref AREDN->ticket:115
2015-06-29 22:58:08 -07:00
Darryl Quinn d4f6aea68e bugfix: define tun hostname for olsrd 2015-06-29 20:07:01 -05:00
AE6XE 0dc37a82de Merge branch 'MeshBugfix' into release-3.15.1.0
bugfix: fixes AREDN->ticket:128
2015-06-21 22:10:10 -07:00
AE6XE 9481c21db6 bugfix: fixes AREDN->ticket:128 remote neighbor incorrectly shown as having tunnel 2015-06-21 22:06:40 -07:00
Conrad Lara - KG6JEI f915225459 bugfix: Add in-testing support for older NanoStation M5 XW boards
board.info provided by VE3KMV
{{{
board.sysid=0xe005
board.cpurevision=0x000000c2
board.name=NanoStation M5
board.shortname=N5N
board.subtype=
board.netmodes=7
board.hwaddr=00272232336C
board.reboot=30
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=1524
board.phy.2.maxmtu=1524
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe005
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.offset=5
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=16
}}}
2015-06-21 19:24:43 -07:00
Conrad Lara - KG6JEI 751ab212f4 bugfix: ntpclient missing from firmware image
fixes AREDN->ticket:119
2015-06-18 21:54:30 -07:00
Conrad Lara - KG6JEI f0a436333b Merge branch 'RemoveAntSelector' into release-3.15.1.0
bugfix: antenna selector does not function:  Remove selector.

The antenna selector was a hold back to older hardware where both antennas were not used fully.
In all current hardware the system detects the antennas and handles the RF path for us.

The 'hack' we had been using to set the system to use only a single chain no longer works, and since it was a 'hack' to being with (that could cause other issues) it is best to remove it and let the hardware do what it does best.

Dummy loads are still recomended on unused ports for RFI/EMI and keeping the port clean.

fixes AREDN->ticket:120
2015-06-18 21:19:44 -07:00
Conrad Lara - KG6JEI ff43a707c1 cleanup: Make note about automatic antenna selection look better on screen 2015-06-18 21:15:05 -07:00
Conrad Lara - KG6JEI 547069986c bugfix: Antenna selection handle by kernel: Cleanup errors reported by build tests. 2015-06-18 21:09:10 -07:00
Conrad Lara - KG6JEI 21edf5fa02 bugfix:Let kernel handle antenna selection: Remove antenna name mapping data. 2015-06-18 20:18:03 -07:00
Conrad Lara - KG6JEI ea9dfc5d1a bugfix: Let kernel handle antennas:Remove sub functions wifi_validant and wifi_defaultant 2015-06-18 20:15:47 -07:00
Conrad Lara - KG6JEI ee90c366aa bugfix: The 'hack' we have been using to set RF chain has been discontinued.
Trying to registry over-write the antenna setting has never been a good idea in the first place.

The  hardware fully handles antenna selection without forcing it already.

ref AREDN->ticket:120
2015-06-18 18:57:04 -07:00
Conrad Lara - KG6JEI d1253c0d9d bugfix: Channel "0" means "Problem" inside the kernel.
To overhaul the system to allow "0" would take a significant re-write of kernel code. At this time its best to pull channel '0' as it is not in any clear RF space (channel 1 overlaps it)

ref AREDN->ticket:114
2015-06-18 18:35:41 -07:00
Darryl Quinn 8da9756817 bugfix: removed debugging statements 2015-06-17 22:43:20 -05:00
Darryl Quinn 3d7893fd46 Revert "Revert "fixes AREDN->125""
This reverts commit d917b5b2ec.
2015-06-17 00:40:34 -05:00
Darryl Quinn d917b5b2ec Revert "fixes AREDN->125"
This reverts commit 7a05f76c93.
2015-06-17 00:39:07 -05:00
Darryl Quinn 7a05f76c93 fixes AREDN->125 2015-06-17 00:38:13 -05:00
Darryl Quinn 8619bd379e bugfix: force node name to upper in config files for tunnel client 2015-06-16 23:13:58 -05:00
AE6XE 6b576a7dd2 Merge branch 'ContribUpdate' into release-3.15.1.0 2015-06-15 22:19:40 -07:00
AE6XE 1318db863e update: contributors list 2015-06-15 22:18:28 -07:00
AE6XE 5a9ec7bf63 Merge branch 'VtunFirewall' into release-3.15.1.0 2015-06-15 22:12:02 -07:00
AE6XE 177f831e14 bugfix: tunnel firewall rules update for Barrier Breaker chain rename 2015-06-15 22:10:21 -07:00
AE6XE 02c756a489 Merge branch 'MeshBugfix' into release-3.15.1.0
Fixes AREDN->118:Mesh Status links incoorect
2015-06-14 23:09:42 -07:00
AE6XE 4ce0e1e21d Fixes AREDN->118:Mesh Status links incoorect 2015-06-14 23:06:32 -07:00
Darryl Quinn 807f381a04 bugfix: network and firewall tunnel rules reworked 2015-06-14 23:30:06 -05:00
Darryl Quinn 5dc1d0fa02 Revert "bugfix: missing include in firewall config"
This reverts commit 05839715f6.
2015-06-14 22:28:47 -05:00
Darryl Quinn cc2415faf0 bigfix: active icon not appearing on server 2015-06-14 20:50:54 -05:00
Darryl Quinn 05839715f6 bugfix: missing include in firewall config 2015-06-11 01:21:30 -05:00
Darryl Quinn 91762973a5 bugfix: tunnel firewall changes 2015-06-11 01:02:55 -05:00
Darryl Quinn 049e8ce364 Merge branch 'release-3.15.1.0' of ssh://git.aredn.org/aredn_ar71xx into release-3.15.1.0 2015-06-11 00:40:40 -05:00
Darryl Quinn 81ac8b7fbe bugfix: losing network interfaces after node-setup 2015-06-11 00:40:14 -05:00
AE6XE 201a4fc285 Merge branch 'WifiScanFix' into release-3.15.1.0 fixes AREDN->ticket:112
Wifi Scan improperly sorts by signal strength
2015-06-09 21:54:39 -07:00
AE6XE 3429462627 fixes AREDN->ticket:112 wifi scan improperly sorted by signal strength 2015-06-09 21:51:52 -07:00
Darryl Quinn 0472e30333 feature: sortable columns in wifi scan 2015-06-09 23:39:10 -05:00
Darryl Quinn a2456e4df9 bugfix: made firmware upgrade "keep settings" checked by default 2015-06-02 14:49:49 -05:00
Conrad Lara - KG6JEI 1f2737f0f3 bugfix: tunnels: Unable to route to connections across tunnel
Firewall rules don't get called because vtund is at /usr/sbin/vtund not /usr/bin/vtund

Also make the check if line posix compatible while we are chaning the path to be sure it works in the future too.
2015-05-25 23:04:34 -07:00
AE6XE cae4064b48 Merge branch 'MeshBugfix' into release-3.15.1.0 2015-05-25 10:49:01 -07:00