Commit Graph

224 Commits

Author SHA1 Message Date
Tim Wilkinson c57d384ca6 LQM on by default 2022-06-16 20:34:39 -07:00
Joe AE6XE 79318f0b40 aredn: Add definition for PBE M5 300-ISO 2022-06-15 22:11:40 -07:00
Steve AB7PA 6aff2636c0
report node hardware better on Status page 06/07/2022 (#383)
* report hwtype better for UBNT nodes

* add Ubiquiti mfg to radios.json

* change field name

* edit field name to model
2022-06-07 21:31:30 -05:00
Steve AB7PA fc9a946286
fix typo in radios.json (#380) 2022-06-03 21:44:27 -05:00
Tim Wilkinson a8b7f8a216
LQM improvements (#364) 2022-05-20 08:10:01 -05:00
Tim Wilkinson b23ab5ee8a
Link Quality Management (#360)
* Link Quality Management experiment (built in)

* Protect LQM pages

* Omit "empty" mac addresses

* Integrate LQM v0.2
Includes proposed UI if this were built-in.
When LQM is enabled (advanced settings) the usual distance inputs are
replaced with "min snr' and "max distance" inputs which are the major
ones you might tweak, as well as a link to the LQM status page.
Other controls are now available (so protected) in advanced settings.

* Improve LQM updating

* Use running snr averages

* Merge app changes

* AREDN-ize the UI

* Improve status language

* Improved DtD detection

* Improve quality reporting

* Link Quality category

* Enable by default

* Better intergration

* Link => Neighbor

* Formatting

* Make sure initial page is populated without extra fetch

* Handle empty lqm.info

* Update with latest experiment algorithm changes

* Validate LQM settings before applying them

* Algorithm updates

* Improve quality reporting

* %% -> %

* Default max distance now 50 miles

* Get actual noise if radio will provide it

* low_snr => min_snr

* Dont print node description if we dont have one

* Remove properties duplicated from setup page

* Localize max distance. Miles in GB and US, Kilometers everywhere else.

* Ping link quality testing

* UDP 'ping' for quality check

* Change Active Settings title

* Expand ping test

* Improve messaging

* Add a ping penalty for neighbors which cannot be contacted in a timely manner.

* Remove user_blocks config option. No one needs to use this anymore.

* Localize distances on lqm page

* Improve status reporting

* First run emergency node setup.
When a node first runs LQM, if the default settings fail to connect to
a node we will now adjust them so that at least one node is viable.

* Restore blocking of mac addresses

* LQM now off by default
fixed #47
2022-05-18 12:49:00 -05:00
Tim Wilkinson 1c6c596d38
Only start vtund server if we have active clients. 04/27/2022 (#343)
Without active clients the server will fail to start. This is okay, except this
error code causes the package installer to incorrectly report an install problem
requiring an unnecessary reboot.
2022-04-27 11:38:56 -05:00
Tim Wilkinson c42ac68767 Include iperf3 by default 2022-04-20 20:50:19 -07:00
Tim Wilkinson fc55e44001
Run NTPD daily to sync time against network clock (#319) 2022-03-27 20:13:18 -05:00
Tim Wilkinson 75d42693d3
Stop people removing tunnel components (which will break things now) (#320) 2022-03-25 14:15:44 -05:00
Tim Wilkinson 321e58bd37
Include tunnels by default (#302)
* Include tunnels by default

* Tunnels are always installed so no longer need this flag
2022-03-17 20:57:48 -05:00
Tim Wilkinson 8947e6f23c
Migrate LeafletJS to new URL (#298) 2022-03-16 21:42:26 -05:00
Tim Wilkinson 09985d3c57
Completely remove perl from the build DUMP_PERL (#291)
* And finally ... remove perl from the images

* Remove two more than came from the Admin merge

* Remove perl from perm packages
2022-03-15 21:23:39 -05:00
Tim Wilkinson 49300073dc
Remove xinetd (which has little to do) (#292)
Switch olsrd dot_draw plugin to directly accept connections and not pass through xinetd.
2022-03-14 19:23:03 -07:00
Tim Wilkinson 7dde68bbb5
Lua page: Admin (#290)
* Fix scripts to fail gracefully if tunnel software not configured.
* Add 'manager.lua' to restart list
* Admin page in Lua (+associated upgrade script)
* Rename bbhn-postupgrade -> aredn_postupgrade
* Add missing 'uploadctlservices' call before package upload
2022-03-13 20:19:04 -07:00
Tim Wilkinson 93e8d0a53d Cron is only running to poll AREDN messages, so kill it.
And move polling into the Lua Manager
2022-03-09 19:18:19 -08:00
dman776 02ffc1e1b9
Revert "Prevent mesh from accessing internal LAN (#175)" (#240)
This reverts commit 86473b642e.
2022-02-28 15:45:46 -06:00
battlehax 86473b642e
Prevent mesh from accessing internal LAN (#175) 2022-02-28 14:41:22 -06:00
Tim Wilkinson fa6c2da4fe
Lua Services (#189)
* Lua Services

* Support multiple antenna chains

* Improved led detection

* Fix logging

* Add manager.log files to support tool
2022-01-17 18:54:44 -06:00
dman776 488247753c
remove 'trunk' from snapshots path (#194) 2021-12-18 10:42:13 -06:00
Tim Wilkinson ee2791c621
Dmz mode migrate fix (#169)
* Migrate /etc/config/dmz-mode to /etc/dmz-mode

* Migrate dmz_mode into /etc/config/aredn

* Use cmd append

* Changes should be in /etc/config.mesh

* Add commit
2021-11-19 15:48:45 -06:00
dman776 7163819bf2
moved uci actions and file actions under file exists test (#173) 2021-11-12 08:34:31 -06:00
Tim Wilkinson f1b949134d
Stop creating 'config alerts' on every reboot. (#172)
Co-authored-by: Tim Wilkinson <tim@aredn-build.home>
2021-11-11 12:08:49 -06:00
dman776 90d9ac94bc
fix: duplicate to the config.mesh structure after saving. (#170) 2021-11-09 23:16:25 -06:00
dman776 f0c62fc2a7
enhancement: migrate location info to uci (#168)
* add uci migration script

* removed debug lines

* added newline to end

* include gridsquare values

* migrate lat/lon/gridsquare to uci format

* remove from sysupgrade kept files list
2021-11-09 17:03:20 -06:00
Tim Wilkinson 1fd909b18d
Meshoween: Better way to add new uci meshstatus section (#159) 2021-11-03 21:26:56 -05:00
Tim Wilkinson 134532ab2a
aredn: Meshoween Mesh status page optimizations (#157)
* Memory and cpu performance improvements
* Fix bandwidth reporting
* Discard large arrays once we're done with them
* Fixup whitespace
* Improve string constructions
* Use available mem
* Print the Remote Nodes as we go (can be big)
* Local variables
* Stop re-reading arp/mac files
* Reduce calls to system 'cat'
* Simply lat/lon read
* Only read route30 once
* Whitespace
* Make meshstatus limits configurable
* and => &&, or => ||
* gzip content if we can

fixes #155
2021-11-02 21:35:39 -07:00
Paul K3PGM 3ddb7a0bb2
feature: runtime-configurable tunnel limits (#84) 2021-04-23 09:46:09 -05:00
Paul K3PGM 130119f163
Tunnel servers limited to 9 - same fix as vtundsrv in f4a1e73 (#82) 2021-03-21 19:13:34 -05:00
dman776 cdf8057f65
bugfix: re-submit path reset2 (previously approved) (#75) 2021-03-12 20:02:08 -06:00
dman776 7c6c1e4636
bugfix: reset download paths upon upgrade to default (#69)
* bugfix: reset download paths upon upgrade to default, if standard paths are used.

* correct aredn_base path default
2021-02-23 21:23:06 -06:00
Eric e4a0c996ff bugfix: custom download paths during firmware upgrade
Fixes #575
2020-10-07 16:23:46 -07:00
Eric 2c1bd9ce0e
aredn: enhancement: Nat mode aliases
Aliases in NAT mode allows the node admin to create alias names for hosts on the LAN and then use those for creating port forwarding rules.  The aliases DO NOT effect the rest of the mesh network and are not propagated via OLSR.

NAT Mode aliases are only usable on the local LAN where the IP addresses are known and routable only on the subnet.   Since the NAT hides these IP addresses or the node masquerades, other mesh nodes and devices by definition only know about the node’s hostname.  Thus aliases on the LAN in NAT mode are not propagated by OLSR across the mesh.  You _CANNOT_ use an alias name in a service listing.

You _will_ be able to set an alternate hostname for any host on the nodes' LAN however.
A host named `CBY45-DELLLAPTOP` can also be known as `wxc-shack-laptop`. It may make remembering which host is which a bit easier.

Since OLSR does not propagate the alias,  the "Do Not Propagate" checkbox while in NAT Mode is hidden.
2020-10-07 16:20:59 -07:00
Eric e13dd2cb04
aredn: allow aliased hostnames on the mesh
Allows for aliased hostnames on the mesh. One IP/Host can be assigned to multiple hostnames.
This is useful for many things including virtual hosts, virtual machines, virtual email addresses, etc.
The possibilities are actually _endless_.

Fixes #516
2020-09-08 16:39:49 -05:00
Joe Ayers f4a1e73189 aredn: bugfix max tunnel limited to 9 instead of 10
fixes #564
2020-09-08 14:39:23 -05:00
dman776 5e572ff66a
aredn: add aredn local alerts capability (#552) 2020-08-18 16:17:03 -05:00
Joe Ayers 1adcfd77a5 aredn: remove config files no longer in use consuming flash
clean up 176k of flash space.  Config files include modes
forA P, Client, Mesh_Ap, and ROuter.  Files are no longer
referenced or used.
2020-06-29 08:11:44 -05:00
Joe AE6XE 7b3f205ffb
aredn: allow wan ping (#544)
fixes: #509
2020-06-24 21:08:06 -05:00
Eric 31492676dc
update: Change the nodes default map tile server URL away from MapBox (#527) 2020-06-20 19:54:12 -05:00
apcameron 80619b73a9
ath79: Migrate the TP-LINK WBS Devices to the ath79 Branch (#525) 2020-05-01 09:30:39 -05:00
Joe AE6XE b53ce1e817
bugfix: aredn firewall blocking traffic when using tunnel feature (#524)
fixes #522
tested by: Matthew KB9OIV <Matthew.annen@gmail.com>
tested by: Chris K3ADA <sutehk.cs@gmail.com>

Resolves 2 issues with tunnel iptable rules.  A rule needed to be
shifted down by 1 position in chain given upgrade to openwrt 19.07.
Reload of rules was not correctly retaining chain order and creating
duplicate entries, inadvertantly blocking intended traffic.
2020-04-29 20:54:29 -05:00
apcameron 62adfa9eb8
ath79: Migrate CPE210 v1/v1.1, CPE510v1/v1.1 to the ATH79 Branch (#523)
Installation:

Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
2020-04-28 22:29:37 -05:00
apcameron 31c6669c2f ath79: add support for TP-Link CPE220 v2
Specifications:

    * SoC: Qualcomm Atheros AR9344 (560 MHz)
    * RAM: 64MB
    * Storage: 8 MB
    * Wireless: 2.4GHz N based built into SoC 2x2
    * Ethernet: 2x 100/10 Mbps, integrated into SoC, 24V POE IN

Installation:

Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
2020-04-20 19:20:57 -07:00
dman776 c3f94bd0d5
feature: add "aredn alerts" feature in header (#505)
* feature: add "aredn alerts" feature in header

* optimize conditional logic

* additional fixes

* improve presentation display
2020-04-08 21:31:01 -05:00
Eric 83675fbd9d
enhancement: ability to change and revert firmware and package download paths (#490)
replaces #486
fixes #452
2020-04-03 15:58:30 -05:00
dman776 5d672f5371
feature: change firmware download location (#488) 2020-02-26 22:59:13 -06:00
Joe Ayers 9d5f8a3a78 aredn: upgrade to pre-openwrt-19.07.2 2020-02-26 00:04:23 -06:00
Joe Ayers 3a4d92add2 aredn: switch from active to passive wifi scan
Password protection is no longer necessary with
a passive scan.  results are same or very similiar,
both options do not always show all devices.
2019-08-24 20:48:52 -07:00
Joe Ayers 74ca6f5a17 aredn: add wan wifi client capability 2019-06-17 20:45:02 -07:00
dman776 c981a1c451
feature: api - added current dhcp leases (#394)
* feature: api - added current dhcp leases

* move dhcp info to secure page

* changed filename
2019-04-30 20:29:17 -05:00