Commit Graph

37 Commits

Author SHA1 Message Date
Tim Wilkinson c57d384ca6 LQM on by default 2022-06-16 20:34:39 -07:00
Tim Wilkinson a8b7f8a216
LQM improvements (#364) 2022-05-20 08:10:01 -05:00
Tim Wilkinson b23ab5ee8a
Link Quality Management (#360)
* Link Quality Management experiment (built in)

* Protect LQM pages

* Omit "empty" mac addresses

* Integrate LQM v0.2
Includes proposed UI if this were built-in.
When LQM is enabled (advanced settings) the usual distance inputs are
replaced with "min snr' and "max distance" inputs which are the major
ones you might tweak, as well as a link to the LQM status page.
Other controls are now available (so protected) in advanced settings.

* Improve LQM updating

* Use running snr averages

* Merge app changes

* AREDN-ize the UI

* Improve status language

* Improved DtD detection

* Improve quality reporting

* Link Quality category

* Enable by default

* Better intergration

* Link => Neighbor

* Formatting

* Make sure initial page is populated without extra fetch

* Handle empty lqm.info

* Update with latest experiment algorithm changes

* Validate LQM settings before applying them

* Algorithm updates

* Improve quality reporting

* %% -> %

* Default max distance now 50 miles

* Get actual noise if radio will provide it

* low_snr => min_snr

* Dont print node description if we dont have one

* Remove properties duplicated from setup page

* Localize max distance. Miles in GB and US, Kilometers everywhere else.

* Ping link quality testing

* UDP 'ping' for quality check

* Change Active Settings title

* Expand ping test

* Improve messaging

* Add a ping penalty for neighbors which cannot be contacted in a timely manner.

* Remove user_blocks config option. No one needs to use this anymore.

* Localize distances on lqm page

* Improve status reporting

* First run emergency node setup.
When a node first runs LQM, if the default settings fail to connect to
a node we will now adjust them so that at least one node is viable.

* Restore blocking of mac addresses

* LQM now off by default
fixed #47
2022-05-18 12:49:00 -05:00
Tim Wilkinson 321e58bd37
Include tunnels by default (#302)
* Include tunnels by default

* Tunnels are always installed so no longer need this flag
2022-03-17 20:57:48 -05:00
Tim Wilkinson 8947e6f23c
Migrate LeafletJS to new URL (#298) 2022-03-16 21:42:26 -05:00
dman776 488247753c
remove 'trunk' from snapshots path (#194) 2021-12-18 10:42:13 -06:00
Tim Wilkinson ee2791c621
Dmz mode migrate fix (#169)
* Migrate /etc/config/dmz-mode to /etc/dmz-mode

* Migrate dmz_mode into /etc/config/aredn

* Use cmd append

* Changes should be in /etc/config.mesh

* Add commit
2021-11-19 15:48:45 -06:00
dman776 7163819bf2
moved uci actions and file actions under file exists test (#173) 2021-11-12 08:34:31 -06:00
dman776 f0c62fc2a7
enhancement: migrate location info to uci (#168)
* add uci migration script

* removed debug lines

* added newline to end

* include gridsquare values

* migrate lat/lon/gridsquare to uci format

* remove from sysupgrade kept files list
2021-11-09 17:03:20 -06:00
Tim Wilkinson 1fd909b18d
Meshoween: Better way to add new uci meshstatus section (#159) 2021-11-03 21:26:56 -05:00
dman776 cdf8057f65
bugfix: re-submit path reset2 (previously approved) (#75) 2021-03-12 20:02:08 -06:00
dman776 7c6c1e4636
bugfix: reset download paths upon upgrade to default (#69)
* bugfix: reset download paths upon upgrade to default, if standard paths are used.

* correct aredn_base path default
2021-02-23 21:23:06 -06:00
Eric 31492676dc
update: Change the nodes default map tile server URL away from MapBox (#527) 2020-06-20 19:54:12 -05:00
apcameron 80619b73a9
ath79: Migrate the TP-LINK WBS Devices to the ath79 Branch (#525) 2020-05-01 09:30:39 -05:00
apcameron 62adfa9eb8
ath79: Migrate CPE210 v1/v1.1, CPE510v1/v1.1 to the ATH79 Branch (#523)
Installation:

Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
2020-04-28 22:29:37 -05:00
apcameron 31c6669c2f ath79: add support for TP-Link CPE220 v2
Specifications:

    * SoC: Qualcomm Atheros AR9344 (560 MHz)
    * RAM: 64MB
    * Storage: 8 MB
    * Wireless: 2.4GHz N based built into SoC 2x2
    * Ethernet: 2x 100/10 Mbps, integrated into SoC, 24V POE IN

Installation:

Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
2020-04-20 19:20:57 -07:00
Joe Ayers 9d5f8a3a78 aredn: upgrade to pre-openwrt-19.07.2 2020-02-26 00:04:23 -06:00
Joe AE6XE 123949de9e
aredn: Standardize Ethernet Port vlans for UBNT XM devices (#297)
The secondary port on Ubnt XM devices was non-functional.
Enabled bridge type in network config to utilize both ports.
2018-12-02 17:52:48 -08:00
dman776 dab3f60c9a
bugfix: correct uhttpd page security on sysupgrade (#296) 2018-12-02 17:28:35 -06:00
Joe AE6XE a62fe95b26
aredn: hAP ac lite enable 5GHz LAN Access Point (#287)
* aredn: hAP ac lite enable 5GHz LAN Access Point

enable ability to bridge LAN physical ports with wireless
LAN Access Point capability. On dual band hAP ac lite,
used in parallel with mesh RF on 2GHz.  Enables future
features on single band devices to turn off mesh RF and
repurposed for mesh LAN Access Point.

closes: #215
2018-11-27 21:37:59 -08:00
Joe AE6XE 0bd057ed40 aredn: phase 1 support for Mikrotik rb952Ui-5ac2nD
Add support for the hAP lite model rb952UI-5ac2nD equivilent to
the UBNT AirRouter.  The 5Ghz interface will be configured in a
2nd phase.  This hAP lite model has double the RAM and Flash
of the AR.  the 2Ghz is MIMO (5Ghz is single antenna).
2018-09-03 23:26:56 -07:00
apcameron 0d95d4d708 ar71xx: Add Support for the TP-LINK CPE510 V2.0 Device
Once the PR for this is accepted by Openwrt we will need to remove the file
001-add_support_for_TP-Link_CPE510_v2.patch

Removed 001-add_support_for_TP-Link_CPE210_v2.patch as PR #937 has been committed

Updated 99_setup_aredn_include to remove unused Rssi Led configuration
2018-07-04 18:17:14 -07:00
apcameron 9fd3f30934 ar71xx: Add Support for the TP-LINK CPE210 V2.0 Device
Once Support for the TP-LINK CPE210 V2.0 gets added to the OpenWrt code we will need to drop the patch 001-add_support_for_TP-Link_CPE210_v2.patch
2018-05-15 21:20:44 -07:00
Andrew Cameron 770fe43e23 aredn: upgrade setup_aredn_include to new generate_led 2018-03-29 23:55:55 -07:00
Andrew Cameron 1fc7a926ab bugfix: fix scripts to current standards
local can only be used in a function
2018-03-29 22:00:19 -07:00
Darryl Quinn 25dc984988 security: protect wifi scan page
fixes AREDN->ticket:195

Change-Id: I30f8087aa59483cdbf73cfde8029ccc7bbd42cb5
2016-11-17 14:50:10 -05:00
Conrad Lara - KG6JEI 8f91ad1e0e security feature: Enhance HTTPD password security
Move httpd.conf to not store password and instead depend on the shadow password file.

Also tag the 40_aredn_migrate-httpdconf script to be +x. Not strictly necessary but wish to have this standard

Change-Id: I018d9a3294e45af2316b3c3947ef2a7d8081268b
2016-06-10 19:37:57 -07:00
Conrad Lara - KG6JEI 442b7e9822 bugfix:
Make sure httpd.conf is up to date on first boot.
2015-07-09 16:10:50 -07:00
Conrad Lara - KG6JEI 8975c46c67 bugfix: TPLink and similar, fix port_map led mapping 2015-07-02 20:30:27 -07:00
Conrad Lara - KG6JEI 6b404c27ff bugfix: move set eth mac fixup to /etc/init.d/local
Not getting much debug information at moment, would like to put this in uci-defaults but with issues that I can't seem to log at moment (and not having serial cable for this device) I'm going with lets put it in /etc/init.d/local before nvram and similar gets set.

ref AREDN->ticket:115
2015-07-02 19:03:47 -07:00
Conrad Lara - KG6JEI 2482af260c bugfix: re-work the mac change code.
Old code would set mac on the sub-vlan not the master interface which could cause issues.

Rework to be more functional in the future and to work correctly on vlan interfaces.

ref AREDN->ticket:115
2015-07-01 23:03:01 -07:00
Conrad Lara - KG6JEI 794c00c7c6 bugfix: "wifi" network isn't yet defined during firstboot so hard code interface names to eth0 and wlan0
ref AREDN->ticket:115
2015-06-30 22:17:45 -07:00
Conrad Lara - KG6JEI 7985ff6ba3 bugfix: deal with duplicate MAC on LAN and WIFI
ref AREDN->ticket:115
2015-06-29 22:58:08 -07:00
Conrad Lara - KG6JEI 06a46e4d2a bugfix: Radio0Path is unknonw WIFI doesn't start.
wifi detect  is called in /etc/init.d/boot before uci_apply_defaults is called.

Because of this if we don't have the data about the radio0path we need to remove the wifi config file first before calling wifi detect.
2015-05-16 11:32:29 -07:00
Conrad Lara - KG6JEI e69f1e98ba bugfix: Move aredn_include setup to uci-defaults and fix radio0path upgrade flaw
Needs to be in uci-defaults to be sure these data sets execute BEFORE the OS boots

We also need to get radio0 path because its mandatory for wifi to work.

Needed for sysupgrade from 3.0.2 to latest version.
2015-05-15 22:54:16 -07:00
Conrad Lara - KG6JEI 8761ffc3b8 feature: default rf channel : Remove setting RF channel on first boot.
Remove setting RF channel on first boot in uci-defaults.

This should allow the node to use standard wifi channels when it boots allowing mesh setup to be run from a laptop or mobile device.

We will later move them to a real mesh channel during the mesh setup page.

Should also resolv issue where nodes were booting up on channel -2 and similar and wifi would refuse to start due to regdomain.
2015-05-13 21:50:32 -07:00
Conrad Lara - KG6JEI 3b215c40c0 Initial code for 5GHZ (and other band) devices.
Includes band/channel mapping
Code to set default RF channel on first boot

Add many 5ghz Ubiquiti devices in a testing phase including:
NanoBeam M5 (Intl), NanoBridge M5, AirGrid M5 HP, AirGrid M5, NanoStation M5, NanoStation Loco M5, Bullet M5, Rocket M5

see BBHN->ticket:29
2014-03-27 22:53:06 -07:00