e9166722fd
aredn: add definition for Rocket M5 TI GPS
...
board.sysid=0xe1d5
board.cpurevision=0x00002122
board.name=Rocket M5 Titanium
board.shortname=R5T
board.subtype=GPS
board.netmodes=7
board.hwaddr=DC9FDB2E1715
board.reboot=40
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=2024
board.phy.2.maxmtu=2024
board.gps=1
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe1d5
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.min=-4
radio.1.txpower.offset=5
radio.1.ieee_modes=5
radio.1.antennas=13
radio.1.def_antenna=13
radio.1.antenna.1.id=1
radio.1.antenna.1.name=AMO-5G10
radio.1.antenna.1.gain=10
radio.1.antenna.1.builtin=0
radio.1.antenna.1.chains=2
radio.1.antenna.1.chain.1.id=0
radio.1.antenna.1.chain.1.name=Chain0
radio.1.antenna.1.chain.2.id=1
radio.1.antenna.1.chain.2.name=Chain1
radio.1.antenna.2.id=2
radio.1.antenna.2.name=AMO-5G13
radio.1.antenna.2.gain=13
radio.1.antenna.2.builtin=0
radio.1.antenna.2.chains=2
radio.1.antenna.2.chain.1.id=0
radio.1.antenna.2.chain.1.name=Chain0
radio.1.antenna.2.chain.2.id=1
radio.1.antenna.2.chain.2.name=Chain1
radio.1.antenna.3.id=3
radio.1.antenna.3.name=AM-5G16-120
radio.1.antenna.3.gain=16
radio.1.antenna.3.builtin=0
radio.1.antenna.3.chains=2
radio.1.antenna.3.chain.1.id=0
radio.1.antenna.3.chain.1.name=Chain0
radio.1.antenna.3.chain.2.id=1
radio.1.antenna.3.chain.2.name=Chain1
radio.1.antenna.4.id=4
radio.1.antenna.4.name=AM-5G17-90
radio.1.antenna.4.gain=17
radio.1.antenna.4.builtin=0
radio.1.antenna.4.chains=2
radio.1.antenna.4.chain.1.id=0
radio.1.antenna.4.chain.1.name=Chain0
radio.1.antenna.4.chain.2.id=1
radio.1.antenna.4.chain.2.name=Chain1
radio.1.antenna.5.id=5
radio.1.antenna.5.name=AM-M-V5G-Ti
radio.1.antenna.5.gain=17
radio.1.antenna.5.builtin=0
radio.1.antenna.5.chains=2
radio.1.antenna.5.chain.1.id=0
radio.1.antenna.5.chain.1.name=Chain0
radio.1.antenna.5.chain.2.id=1
radio.1.antenna.5.chain.2.name=Chain1
radio.1.antenna.6.id=6
radio.1.antenna.6.name=AM-5G19-120
radio.1.antenna.6.gain=19
radio.1.antenna.6.builtin=0
radio.1.antenna.6.chains=2
radio.1.antenna.6.chain.1.id=0
radio.1.antenna.6.chain.1.name=Chain0
radio.1.antenna.6.chain.2.id=1
radio.1.antenna.6.chain.2.name=Chain1
radio.1.antenna.7.id=7
radio.1.antenna.7.name=AM-5G20-90
radio.1.antenna.7.gain=20
radio.1.antenna.7.builtin=0
radio.1.antenna.7.chains=2
radio.1.antenna.7.chain.1.id=0
radio.1.antenna.7.chain.1.name=Chain0
radio.1.antenna.7.chain.2.id=1
radio.1.antenna.7.chain.2.name=Chain1
radio.1.antenna.8.id=8
radio.1.antenna.8.name=AM-V5G-Ti
radio.1.antenna.8.gain=21
radio.1.antenna.8.builtin=0
radio.1.antenna.8.chains=2
radio.1.antenna.8.chain.1.id=0
radio.1.antenna.8.chain.1.name=Chain0
radio.1.antenna.8.chain.2.id=1
radio.1.antenna.8.chain.2.name=Chain1
radio.1.antenna.9.id=9
radio.1.antenna.9.name=AM-5AC21-60
radio.1.antenna.9.gain=21
radio.1.antenna.9.builtin=0
radio.1.antenna.9.chains=2
radio.1.antenna.9.chain.1.id=0
radio.1.antenna.9.chain.1.name=Chain0
radio.1.antenna.9.chain.2.id=1
radio.1.antenna.9.chain.2.name=Chain1
radio.1.antenna.10.id=10
radio.1.antenna.10.name=AM-5AC22-45
radio.1.antenna.10.gain=22
radio.1.antenna.10.builtin=0
radio.1.antenna.10.chains=2
radio.1.antenna.10.chain.1.id=0
radio.1.antenna.10.chain.1.name=Chain0
radio.1.antenna.10.chain.2.id=1
radio.1.antenna.10.chain.2.name=Chain1
radio.1.antenna.11.id=11
radio.1.antenna.11.name=RD-5G-30
radio.1.antenna.11.gain=30
radio.1.antenna.11.builtin=0
radio.1.antenna.11.chains=2
radio.1.antenna.11.chain.1.id=0
radio.1.antenna.11.chain.1.name=Chain0
radio.1.antenna.11.chain.2.id=1
radio.1.antenna.11.chain.2.name=Chain1
radio.1.antenna.12.id=12
radio.1.antenna.12.name=RD-5G31-AC
radio.1.antenna.12.gain=31
radio.1.antenna.12.builtin=0
radio.1.antenna.12.chains=2
radio.1.antenna.12.chain.1.id=0
radio.1.antenna.12.chain.1.name=Chain0
radio.1.antenna.12.chain.2.id=1
radio.1.antenna.12.chain.2.name=Chain1
radio.1.antenna.13.id=13
radio.1.antenna.13.name=RD-5G-34
radio.1.antenna.13.gain=34
radio.1.antenna.13.builtin=0
radio.1.antenna.13.chains=2
radio.1.antenna.13.chain.1.id=0
radio.1.antenna.13.chain.1.name=Chain0
radio.1.antenna.13.chain.2.id=1
radio.1.antenna.13.chain.2.name=Chain1
radio.1.distance_limit_km=0
radio.1.chanbw="5,8,10,20,30,40"
feature.rssi.leds=6
feature.gps=1
feature.gps.leds=7
feature.ext_reset=0
2019-03-20 21:26:24 -07:00
0d223232b5
bugfix: standardize browser page title on the node status page to be consistent with other pages ( #372 )
...
fixes #366
2019-02-25 21:08:44 -06:00
60d01c91da
bugfix: correct spelling error ( #370 )
...
fixes #368
2019-02-25 08:20:22 -06:00
d5be7814b3
aredn: enable ath9k auto distance capability ( #367 )
2019-02-24 16:03:24 -06:00
f833b38e04
Adding support for the TP-Link WBS210 version 1.
2019-02-12 07:20:44 -08:00
711fe96a70
aredn: add definition for nanobridge M2 13
...
fixes #358
2019-02-07 20:52:27 -08:00
4eda661962
feature: add volume control to signal tone ( #353 )
2019-02-02 21:49:49 -06:00
3abc82f529
feature: add pitch control to signal tone ( #347 )
2019-01-31 16:57:30 -06:00
ddda727da0
bugfix: correct issue when pushing sound "on" more than once ( #345 )
2019-01-29 18:53:22 -06:00
89c9d37075
bugfix: new settings will now show after a conditional setting ( #343 )
2019-01-29 12:20:37 -06:00
d9acfa2ea7
feature: add sounds to realtime signal page ( #342 )
2019-01-28 23:39:51 -06:00
07aa305e29
aredn: olsrd: add olsrd watchdog
...
Adding native olsrd watchdog on top of procd
ensures mesh nodes are always accessable.
closes #338
2019-01-27 14:12:37 -08:00
90b21d88d2
aredn: add definition for hAP ac lite current revision
...
/proc/cpuinfo machine string to identify the device
has changed.
From - MikroTik RouterBOARD 952Ui-5ac2nD
To - MIkroTik RouterBOARD RB952Ui-5ac2nD
2019-01-27 12:19:11 -08:00
ef24633204
bugfix: aredn: fix bogus nano-m-xw image upload warning
...
fixes #330
2019-01-23 23:17:02 -08:00
b5ceb1ccc2
bugfix: set execute bit on api script ( #329 )
2019-01-22 17:14:35 -06:00
664f2ee629
Some LUA Code Clean Up, API ( #327 )
...
* Refactor API
* work in progress
* lua clean up
2019-01-21 15:41:31 -06:00
13a6afb815
aredn: Add definitions for Rocket M2 XW
2019-01-10 17:10:46 -08:00
6728fba06b
bugfix: aredn sysinfo.json fails with mesh rf off
...
added json meshrf->status->on/off
fixes: #317
2018-12-22 10:14:58 -08:00
0fed66dbf5
bugfix: bogus warning when selecting firmware file to sysupgrade
...
fixes : #290
2018-12-19 20:30:23 -08:00
588b59cf65
aredn: Add definitions for Mikrotik RB-911G-5HPnD
2018-12-18 20:40:58 -08:00
1c6d2286cc
aredn: hap ac lite add 2G/5G lan ap options
...
Add option for hap ac lite to select which band to
use for LAN AP option, 2GHz or 5GHz. Also, ensure
all wireless cards are defined when disabled to
prevent default wireless config options.
2018-12-17 20:13:37 -08:00
d188fcf980
bugfix: firstboot button does not function
2018-12-12 19:08:46 -08:00
97938b4697
bugfix: remove SNR from signal archive page ( #309 )
...
fixes #242
2018-12-12 18:11:40 -06:00
f777e914f9
aredn: Mesh RF enable/disable ( #307 )
...
add feature to turn off Mesh RF if not in use. When off,
section to re-purpose wireless card to LAN bridged Access
Point becomes visable.
Closes #155
2018-12-12 15:16:07 -06:00
b9bf9ba099
ar71xx: Add Support for the TP-LINK CPE220 V2.0 Device ( #306 )
...
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
2018-12-11 17:09:11 -06:00
8f71b15d4a
bugfix: Advanced config settings not persistant though reboot ( #305 )
...
fixes #303
2018-12-11 06:47:36 -06:00
230eddf8bb
ar71xx: Add Support for the TP-LINK CPE510 V3.0 Device
...
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
2018-12-10 14:38:00 -08:00
7486a179c7
aredn: add support for Mikrotik LDF-5nD
2018-12-07 21:36:03 -08:00
9d60516176
ar71xx: Add Support for the TP-LINK CPE220 V3.0 Device
...
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
2018-12-05 19:38:46 -08:00
6982757c79
ar71xx: Add Support for the TP-LINK CPE610 V1.0 Device
...
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
2018-12-03 19:25:48 -08:00
123949de9e
aredn: Standardize Ethernet Port vlans for UBNT XM devices ( #297 )
...
The secondary port on Ubnt XM devices was non-functional.
Enabled bridge type in network config to utilize both ports.
2018-12-02 17:52:48 -08:00
303c50904c
aredn: harden hAP ac lite 5Ghz Lan Access Point ( #293 )
...
enable passwords with virtually any character, enable SSIDs
with virtually any character. ensure ap is always
encrypted to give operator control of client access and
license compliance. Remove (week) WEP encryption option.
2018-11-30 08:32:38 -08:00
7792186dda
feature: provide more info on upload disable with tunnels ( #289 )
2018-11-28 22:37:11 -06:00
a62fe95b26
aredn: hAP ac lite enable 5GHz LAN Access Point ( #287 )
...
* aredn: hAP ac lite enable 5GHz LAN Access Point
enable ability to bridge LAN physical ports with wireless
LAN Access Point capability. On dual band hAP ac lite,
used in parallel with mesh RF on 2GHz. Enables future
features on single band devices to turn off mesh RF and
repurposed for mesh LAN Access Point.
closes : #215
2018-11-27 21:37:59 -08:00
355e34080f
aredn: Add definitions for Mikrotik LHG-5HPnD-XL
2018-11-17 10:40:33 -08:00
a997ef9545
bugfix: Found another place where uhttpd was tossing a uci error. Fixed
...
Also removed the description block from the mesh page if the description has not been set.
(there was a small grey area before, even with no description set)
2018-11-14 19:37:02 -08:00
311f4eff3d
bugfix: suppress uhttp uci error on mesh page with no description ( #267 )
2018-11-14 16:16:51 -06:00
a2f32e041b
bugfix: litebeam M5 is single chain device ( #265 )
2018-11-10 21:51:21 -06:00
c8e13ae797
aredn: Add definitions for Mikrotik LHG5
2018-11-10 13:53:45 -08:00
a88803fe5a
bugfix: correct "Bad Gateway" error on Advanced Config page ( #263 )
2018-11-08 14:08:51 -06:00
17c08a8ffa
aredn: Add LiteBeam M5 definition ( #261 )
...
fixes #257
2018-11-07 20:27:57 -06:00
861de150ea
feature: add USB passthrough support to advancedconfig page ( #255 )
...
* feature: add POE passthrough support to advancedconfig page
* correct shellcheck warnings
2018-11-06 16:00:26 -06:00
700f020e25
ar71xx: add TP-LINK CPE210 V3.0 and CPE510 V2.0 profiles
...
Adds a separate profile and binary for both devices.
fixes #221
2018-11-05 22:28:03 -08:00
9a47ff800a
bugfix: correct poe functions in adv cfg ( #250 )
...
* bugfix: correct poe functions in adv cfg
cleanup shellcheck errors
* avoid unnecessary shell
2018-10-27 11:37:45 -05:00
e8b3520ec7
bugfix: Check to prevent duplicate mesh hostnames when reserving DHCP reservations ( #226 )
...
* bugfix: Check for existing hostnames on the network in DHCP reservations
fixes #216
*additional check for existing hostname when creating new DHCP lease.
checks hosts_olsr file if entered hostname already exists or not on the connected network(s).
outputs info saying such and gives advice to prefix hostname with callsign.
* change to use =~ /\s$host\S/i
* Reworded warning message
* moved the position of the hostname check to only when you click "add" on the DHCP leases page.
this stops it checking all the previously entered hostnames.
2018-10-26 21:53:14 -07:00
1948ba11e7
bugfix: fix reboot button ( #249 )
2018-10-26 19:50:35 -07:00
8716fd42be
Add PoE passthrough option to advanced config ( #243 )
...
* minor changes
* handle null value (change to 0)
* add poe_passthrough script
* change key location
* change key name
* add default info into aredn uci file
* add conditional functions
2018-10-26 19:34:16 -07:00
d74eb1933a
aredn: adjust mesh status layout for OLSR stats ( #248 )
...
fixes #197
html is courtesy of N2MH
2018-10-26 14:25:45 -05:00
750cba55a7
modify the adv config layout ( #247 )
2018-10-26 00:27:15 -05:00
4a50ee2382
aredn: add definition for Bullet M2 XW ( #246 )
...
New Bullet M2 XW models are released by ubnt.
closes #233
2018-10-25 23:44:45 -05:00
Joe Ayers