Commit Graph

88 Commits

Author SHA1 Message Date
Joe AE6XE 903f92801c
aredn: update to openwrt v19.07.10 and patch refresh (#342) 04/24/2022 2022-04-24 17:14:10 -05:00
Tim Wilkinson ad78e077f0
Improve the firmware upgrade process (#294)
* Improve the firmware upgrade process

The old firmware upgrade process attempted to free up RAM by reusing
the 'upgrade_kill_prep' script which is later used by '/sbin/sysupgrade'.
Unfortuantely this doesn't work as intented. While the script will go about
killing various services, 'procd' just goes and starts them up again using
quite a bit more memory in the process. Instead this script just kills
the various daemons 'no questions asked' and then runs the associated
'/etc/init.d/xxx stop' script to instruct 'procd' not the start them up again.
This gets us to the place the original script was trying to go.

+ A syntax fix in '007' patch (need spaces around the [ .. ])

* Inline the style for the firmware page to avoid sleep before flash

* Minor reliability improvements

* Clear away services even earlier
2022-03-16 21:45:26 -05:00
Tim Wilkinson 6707867dfd Fix typo in iperf fw restart patch.
The iperf3 package installs a firewall rule, but the script to restart
the firewall on install had a typo meaning it wasn't called (so the
new firewall setup required a reboot)
2022-03-15 06:58:43 -07:00
Joe AE6XE 3e78e64bfc
aredn: add missing ar71xx led definitions (#241) 2022-02-28 21:42:43 -06:00
Joe AE6XE ce4f694563
aredn: extend 2G band adding ch -3 and ch -4 (#210) 2022-01-21 21:52:26 -06:00
dman776 020ae4def6
Update banner (#80)
* update login banner

* correct patch file
2021-03-16 15:24:15 -05:00
dman776 20b6d09e28
update login banner (#79) 2021-03-15 13:43:23 -05:00
Joe AE6XE 011eab0895
aredn: add new Mikrotik model string for SXTsq5nD (#62) 2021-01-22 23:10:14 -06:00
apcameron 60e140c090
openwrt: bump version to v19.07.4 (#588) 2020-12-10 18:36:47 -06:00
apcameron ff0a08dc3c ath79: Enable the LNA for ALL for the TP-Link CPExxx Devices based on the AR9344
This should improve the Power Levels for the 1 Port Devices.
2020-12-06 18:25:36 -08:00
Joe Ayers bf944dface AREDN: add new Mikrotik RBLHG-2nD model string
fixes #582
2020-10-18 16:11:36 -07:00
Joe Ayers 29a56b8850 aredn: add new mikrotik model string for LHG based devices
new model string: MikroTik RouterBOARD RBLHG-5HPnD
2020-10-07 22:42:15 -07:00
apcameron fa2f1b7b1b ath79: Add Support for the TP-Link CPE510 v3.20 2020-09-29 20:43:58 -05:00
Joe Ayers da3191478a aredn: some LHG based devices stuck in bootloop
add missing board id to sysupgrade pre upgrade steps
for mikrotik NOR based devices
2020-08-19 23:04:51 -05:00
Joe Ayers 5c723917e6 aredn: add new Mikrotik model string SXTsq5HPnD
Mikrotik change of string used to identify device
2020-08-18 18:30:07 -05:00
Joe Ayers 6e579d4d6e aredn: extend 5GHz channel options from 133 down to 131
In the US, part 97 ham radio lower band edge is 5650.
Channel 131 @ 10MHz channel width is the lowest channel
setting that stays within allocation.

fixes #550
2020-08-18 16:08:04 -05:00
apcameron d06bbaac2a ath79: CPE220V3 Fix
Remove Duplicate entry and fix remaining entry in the firmware file
2020-06-08 20:54:24 -05:00
Joe Ayers 16e33b5306 aredn: add new Mikrotik model strings for RBLHG-5nD and RBLHG-2nD-XL 2020-05-27 19:33:56 -05:00
apcameron 7c50771bad openwrt: bump to 19.07.03
Remove 002-ar71xx-mikrotik-improved-support.patch
	Update 702-enable-country-hx.patch
2020-05-25 21:21:33 -05:00
Joe Ayers a2f7da4a3f ar71xx: add early support for Mikrotik r2 hardware
Apply openwrt PR 3006
https://github.com/openwrt/openwrt/pull/3006
author: Thibaut VARÈNE <hacks@slashdirt.org>

early patch to AREDN will be removed and inherited from openwrt in
future 19.07 point or later release.  This patch enables use
of newer BaseBox, AntBox, and possibly other updated devices with ath9k
calibration data encoded with a different technique.
2020-05-10 20:43:38 -07:00
apcameron 80619b73a9
ath79: Migrate the TP-LINK WBS Devices to the ath79 Branch (#525) 2020-05-01 09:30:39 -05:00
apcameron 62adfa9eb8
ath79: Migrate CPE210 v1/v1.1, CPE510v1/v1.1 to the ATH79 Branch (#523)
Installation:

Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
2020-04-28 22:29:37 -05:00
apcameron 31c6669c2f ath79: add support for TP-Link CPE220 v2
Specifications:

    * SoC: Qualcomm Atheros AR9344 (560 MHz)
    * RAM: 64MB
    * Storage: 8 MB
    * Wireless: 2.4GHz N based built into SoC 2x2
    * Ethernet: 2x 100/10 Mbps, integrated into SoC, 24V POE IN

Installation:

Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
2020-04-20 19:20:57 -07:00
apcameron 831df9af23 ath79: Add Support for the TP-Link CPE610-v2
TP-Link CPE610-v2 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on Atheros AR9344
Specifications:
Based on the same underlying hardware as the TP-Link CPE510
Power, LAN0, WLAN green LEDs
23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector
Flashing instructions:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Signed-off-by: Andrew Cameron apcameron@softhome.net
2020-04-15 05:53:06 -07:00
apcameron b452af4c05 bugfix: migrate the TP-LINK CPE610 v1 device to the ath79 branch 2020-04-10 17:54:51 -07:00
apcameron 3b4ac70028 bugfix: Migrate the TP-LINK CPE510 v2/v3 to the ath79 branch 2020-04-09 06:13:28 -07:00
Joe AE6XE a3610db810
aredn: apply aredn port config settings to NS XW ath79 (#498) 2020-03-31 21:14:13 -05:00
apcameron 90a2b39ac5 bugfix: Correct CPE510 v3 Image 2020-03-31 19:08:30 -07:00
Joe Ayers 7243fe082a bugfix: ubnt: pbe 400/400-iso/620 port hang
fixes #165
2020-03-23 11:08:49 -07:00
Joe Ayers 9d5f8a3a78 aredn: upgrade to pre-openwrt-19.07.2 2020-02-26 00:04:23 -06:00
Joe Ayers b6d0745443 aredn: add definition for cpe210 v3.1 and v3.2 2020-02-23 21:31:33 -06:00
Joe Ayers abd48d674d bugfix: added missing network defintions for gl-ar150 2020-02-22 22:00:22 -06:00
apcameron c0bac78a36
bugfix: fix the Authentication for vtun to be compatible with the previous tunnels (#478) 2020-02-11 08:18:08 -06:00
apcameron 5244948706
fix: fix status led for the wbs510-v2 (#476) 2020-01-30 21:03:04 -06:00
Joe Ayers ae593838bb aredn: upgrade to Openwrt 19.07.0 release
Co-authored-by: Andrew KK4ZUZ <apcameron@softhome.net>

This commit begins the process to migrate from ar71xx to
ath79 target images.
2020-01-29 07:39:05 -08:00
apcameron 5eedf421da ar71xx: add Support for the TP-LINK WBS510 V2
This adds support for a popular low-cost 5GHz N based AP

Specifications:
- SoC: Atheros AR9344
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
- Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
2019-11-23 09:17:05 -08:00
Joe Ayers 1272c5785e aredn: add definition for Mikrotik RBSXTsq2nD
Mikrotik has multiple model strings for this device
2019-11-02 21:53:49 -07:00
Joe Ayers 340cd76be6 aredn: add definition for Mikrotik SXTsq 2nD
tested by K9CQB <damon.schaefer@me.com>
2019-10-11 16:14:44 -07:00
Joe Ayers 7f4bf75d78 aredn: Add definitions for RBSXTsq5nD 2019-09-22 22:11:18 -05:00
Joe Ayers ad0caaf56a aredn: add support for Mikrotik RBSXTsq5HPnD 2019-08-30 21:55:50 -07:00
Joe Ayers 8177bab22b aredn: add definitions for LDF-2nD, LHG-2nD, LHG-2nD-XL
The LDF-2nD internally has the LHG-2nD motherboard.
closes #332
2019-06-25 21:51:07 -05:00
Joe Ayers e316dbc598 bugfix: Fix instance of sysupgrade failing
It was discovered that sysupgrade would exit with an
error when some processes could not be killed.  The
wifi interface is brought down to avoid this condition
prior to doing the sysupgrade
2019-06-19 09:47:58 -07:00
Joe Ayers d8f9320021 aredn: add GL-iNet AR750 definitions 2019-05-26 16:24:39 -07:00
Joe Ayers 8aeb64f323 aredn: new LDF5 model number
Mikrotik change from "MikroTik RouterBOARD LDF-5nD"
to "MikroTik RouterBOARD RBLDF-5nD"
2019-05-04 09:55:32 -07:00
Joe Ayers f134465edb aredn: add auto distance setting option
contributing author lua code: dman776 <dman776@gmail.com>
2019-05-03 19:17:14 -07:00
ZL2WRW 1a43b07293 Add experimental support for the GL.iNet GL-AR150 (#407)
* Add experimental support for the GL.iNet GL-AR150 - https://openwrt.org/toh/gl.inet/gl-ar150
Mesh networking and tunneling have been confirmed working.
This device has been confirmed capable of operating on channel -1, but /etc/config/wireless has to be manually edited to select this channel.

* www/cgi-bin/perlfunc.pm patched to add UI support for the GL.iNet GL-AR150

* www/cgi-bin/perlfunc.pm patched to add UI support for the GL.iNet GL-AR150 - seems like only 18 dBm TX power is possible

* Remove Experimental comments and designate as stable

* Configure Ethernet ports & VLANs for GL-AR150, and update README.md

* Fix misunderstanding re README.md

* Patch Upstream OpenWRT GL-AR150 LAN & WAN LED mapping, configure WLAN LED as mesh linked indicator.
2019-04-30 20:55:09 -05:00
Joe Ayers 9470c6b1ad aredn: add definition for Mikrotik LHG 5HPnD 2019-04-02 17:57:04 -07:00
Joe Ayers a399623140 Revert "aredn: enable ath9k auto distance capability (#367)"
This reverts commit d5be7814b3.
Auto Distance is not ready for a release and will be
reintroduced afterwards. Added logic to reset '0' distance
to 60km so tower nodes will continue to respond after
upgrade if running the experimental auto distance
2019-03-21 21:30:48 -07:00
Eric f6e5832fe2 bugfix: delay start up of snmpd until later in the boot process.
On some devices snmpd would start before it's configuration file was created.

Changed /etc/rc.d/S50snmpd to /etc/rc.d/S98snmpd
2019-03-01 19:55:48 -08:00
Joe AE6XE d5be7814b3 aredn: enable ath9k auto distance capability (#367) 2019-02-24 16:03:24 -06:00