Commit Graph

80 Commits

Author SHA1 Message Date
AbortRetryFail 9fd900f631
Add build target for Meraki MR16 devices. (#104)
closes #103
closes #104
2021-05-16 15:29:40 -07:00
Joe Ayers 745b15ee29 aredn: reset branch to main 2021-04-10 23:27:36 -07:00
dman776 70287347b4
aredn: Prepare the 3.21.4.0 release (#92)
* aredn: Prepare the 3.21.4.0 release

* add Mikrotik mAntbox to README
2021-04-10 09:58:45 -05:00
dman776 3de44d3830
readme update - correct typo (#87) 2021-03-31 16:28:23 -05:00
Joe AE6XE fa12ec50e1
aredn: add Rocket XM ar71xx image to support older models with USB port (#83) 2021-03-24 22:25:34 -05:00
Darryl Quinn 91fa534c93 aredn: change readme to refer to new default branch name (main) 2021-01-26 19:37:45 -08:00
dman776 3faf42cb8d
updated readme (#60) 2020-12-30 20:22:41 -06:00
Darryl Quinn 45dd094936 update to new repo paths 2020-12-15 18:36:40 -08:00
dman776 4c08869520
bugfix: correct link to the downloads directory (#590)
* bugfix: correct link to the downloads directory

* fix https protocol
2020-12-11 11:19:54 -06:00
Joe Ayers 437b4780ae aredn: reset branch to develop 2020-07-09 21:01:24 -07:00
Joe AE6XE dd3592f8ee
aredn: Prepare 3.20.3.1 release (#546) 2020-07-06 10:10:11 -05:00
apcameron 80619b73a9
ath79: Migrate the TP-LINK WBS Devices to the ath79 Branch (#525) 2020-05-01 09:30:39 -05:00
apcameron 62adfa9eb8
ath79: Migrate CPE210 v1/v1.1, CPE510v1/v1.1 to the ATH79 Branch (#523)
Installation:

Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
2020-04-28 22:29:37 -05:00
apcameron 31c6669c2f ath79: add support for TP-Link CPE220 v2
Specifications:

    * SoC: Qualcomm Atheros AR9344 (560 MHz)
    * RAM: 64MB
    * Storage: 8 MB
    * Wireless: 2.4GHz N based built into SoC 2x2
    * Ethernet: 2x 100/10 Mbps, integrated into SoC, 24V POE IN

Installation:

Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
2020-04-20 19:20:57 -07:00
apcameron 831df9af23 ath79: Add Support for the TP-Link CPE610-v2
TP-Link CPE610-v2 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on Atheros AR9344
Specifications:
Based on the same underlying hardware as the TP-Link CPE510
Power, LAN0, WLAN green LEDs
23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector
Flashing instructions:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Signed-off-by: Andrew Cameron apcameron@softhome.net
2020-04-15 05:53:06 -07:00
dman776 c1a3edf985
aredn: correct AR750 ports in readme (#513) 2020-04-14 21:57:37 -05:00
apcameron b452af4c05 bugfix: migrate the TP-LINK CPE610 v1 device to the ath79 branch 2020-04-10 17:54:51 -07:00
apcameron 3b4ac70028 bugfix: Migrate the TP-LINK CPE510 v2/v3 to the ath79 branch 2020-04-09 06:13:28 -07:00
Joe Ayers 0f7e378afb aredn: reset branch to develop 2020-03-28 17:38:51 -07:00
Joe AE6XE e44e469b85
aredn: Prepare 3.20.3.0 release (#495) 2020-03-25 19:57:56 -05:00
Joe Ayers 9d5f8a3a78 aredn: upgrade to pre-openwrt-19.07.2 2020-02-26 00:04:23 -06:00
Joe Ayers ae593838bb aredn: upgrade to Openwrt 19.07.0 release
Co-authored-by: Andrew KK4ZUZ <apcameron@softhome.net>

This commit begins the process to migrate from ar71xx to
ath79 target images.
2020-01-29 07:39:05 -08:00
apcameron 5eedf421da ar71xx: add Support for the TP-LINK WBS510 V2
This adds support for a popular low-cost 5GHz N based AP

Specifications:
- SoC: Atheros AR9344
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
- Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
2019-11-23 09:17:05 -08:00
Joe Ayers 340cd76be6 aredn: add definition for Mikrotik SXTsq 2nD
tested by K9CQB <damon.schaefer@me.com>
2019-10-11 16:14:44 -07:00
Joe Ayers 7f4bf75d78 aredn: Add definitions for RBSXTsq5nD 2019-09-22 22:11:18 -05:00
Joe Ayers ad0caaf56a aredn: add support for Mikrotik RBSXTsq5HPnD 2019-08-30 21:55:50 -07:00
dman776 412a1e5f88
readme: updated with note regarding gl.inet keep settings (#440) 2019-07-02 17:40:22 -05:00
Joe Ayers 8177bab22b aredn: add definitions for LDF-2nD, LHG-2nD, LHG-2nD-XL
The LDF-2nD internally has the LHG-2nD motherboard.
closes #332
2019-06-25 21:51:07 -05:00
Joe Ayers d8f9320021 aredn: add GL-iNet AR750 definitions 2019-05-26 16:24:39 -07:00
Joe Ayers fc2235377a aredn: add support for GL-AR300M16 2019-05-17 21:39:38 -07:00
Joe Ayers e15021dc66 aredn: add support for GL-USB150 Microuter 2019-05-04 19:49:52 -07:00
ZL2WRW 1a43b07293 Add experimental support for the GL.iNet GL-AR150 (#407)
* Add experimental support for the GL.iNet GL-AR150 - https://openwrt.org/toh/gl.inet/gl-ar150
Mesh networking and tunneling have been confirmed working.
This device has been confirmed capable of operating on channel -1, but /etc/config/wireless has to be manually edited to select this channel.

* www/cgi-bin/perlfunc.pm patched to add UI support for the GL.iNet GL-AR150

* www/cgi-bin/perlfunc.pm patched to add UI support for the GL.iNet GL-AR150 - seems like only 18 dBm TX power is possible

* Remove Experimental comments and designate as stable

* Configure Ethernet ports & VLANs for GL-AR150, and update README.md

* Fix misunderstanding re README.md

* Patch Upstream OpenWRT GL-AR150 LAN & WAN LED mapping, configure WLAN LED as mesh linked indicator.
2019-04-30 20:55:09 -05:00
Joe Ayers 9470c6b1ad aredn: add definition for Mikrotik LHG 5HPnD 2019-04-02 17:57:04 -07:00
Joe Ayers 77a74d9016 aredn: reset branch to develop 2019-03-23 20:46:33 -07:00
Joe AE6XE 7983e082b9 aredn: Prepare 3.19.3.0 release (#384) 2019-03-22 13:44:41 -05:00
dman776 bfdee216ba
readme: updated with hAP AC Lite port info (#381)
* readme: updated with hAP AC Lite port info

* updated language to clarify and include AirRouters
2019-03-21 16:44:14 -05:00
Bailey Kasin f82e90330a Add Arch build instructions to README (#377) 2019-03-18 10:47:20 -05:00
Patrick Dickey f833b38e04 Adding support for the TP-Link WBS210 version 1. 2019-02-12 07:20:44 -08:00
Joe Ayers bb818a9539 build: upgrade to OpenWrt 18.06.2 and refresh patches 2019-02-06 20:31:10 -08:00
Joe Ayers 13a6afb815 aredn: Add definitions for Rocket M2 XW 2019-01-10 17:10:46 -08:00
Joe Ayers 031fa60e09 aredn: README update for NanoStation XM Ethernet use 2018-12-18 20:42:15 -08:00
Joe Ayers 588b59cf65 aredn: Add definitions for Mikrotik RB-911G-5HPnD 2018-12-18 20:40:58 -08:00
apcameron b9bf9ba099 ar71xx: Add Support for the TP-LINK CPE220 V2.0 Device (#306)
Installation:
     Flash factory image through stock firmware WEB UI
     or through TFTP
     To get to TFTP recovery just hold reset button while powering on for
     around 4-5 seconds and release.
     Rename factory image to recovery.bin
     Stock TFTP server IP:192.168.0.100
     Stock device TFTP adress:192.168.0.254
2018-12-11 17:09:11 -06:00
apcameron 230eddf8bb ar71xx: Add Support for the TP-LINK CPE510 V3.0 Device
Installation:
 Flash factory image through stock firmware WEB UI
 or through TFTP
 To get to TFTP recovery just hold reset button while powering on for
 around 4-5 seconds and release.
 Rename factory image to recovery.bin
 Stock TFTP server IP:192.168.0.100
 Stock device TFTP adress:192.168.0.254
2018-12-10 14:38:00 -08:00
Joe Ayers 7486a179c7 aredn: add support for Mikrotik LDF-5nD 2018-12-07 21:36:03 -08:00
apcameron 9d60516176 ar71xx: Add Support for the TP-LINK CPE220 V3.0 Device
Installation:
     Flash factory image through stock firmware WEB UI
     or through TFTP
     To get to TFTP recovery just hold reset button while powering on for
     around 4-5 seconds and release.
     Rename factory image to recovery.bin
     Stock TFTP server IP:192.168.0.100
     Stock device TFTP adress:192.168.0.254
2018-12-05 19:38:46 -08:00
apcameron 6982757c79 ar71xx: Add Support for the TP-LINK CPE610 V1.0 Device
Installation:
 Flash factory image through stock firmware WEB UI
 or through TFTP
 To get to TFTP recovery just hold reset button while powering on for
 around 4-5 seconds and release.
 Rename factory image to recovery.bin
 Stock TFTP server IP:192.168.0.100
 Stock device TFTP adress:192.168.0.254
2018-12-03 19:25:48 -08:00
Joe AE6XE a62fe95b26
aredn: hAP ac lite enable 5GHz LAN Access Point (#287)
* aredn: hAP ac lite enable 5GHz LAN Access Point

enable ability to bridge LAN physical ports with wireless
LAN Access Point capability. On dual band hAP ac lite,
used in parallel with mesh RF on 2GHz.  Enables future
features on single band devices to turn off mesh RF and
repurposed for mesh LAN Access Point.

closes: #215
2018-11-27 21:37:59 -08:00
Joe Ayers 5a7c1ebbc9 build: README updates 2018-11-22 13:43:26 -08:00
Joe Ayers 311d32a943 build: more README updates 2018-11-21 21:32:11 -08:00