* Lua Services
* Lua versions of user page (non-admin)
* Support multiple antenna chains
* Improved led detection
* Fix logging
* Add manager.log files to support tool
* Lua versions of user page (non-admin)
* Dont count default route
* Fix board id for older nodes
* Handle missing node.history
* Check /tmp/snrlog exists
* Per discussion, make the Lua pages the defaults and Perl the backups
* Migrate /etc/config/dmz-mode to /etc/dmz-mode
* Migrate dmz_mode into /etc/config/aredn
* Use cmd append
* Changes should be in /etc/config.mesh
* Add commit
* add uci migration script
* removed debug lines
* added newline to end
* include gridsquare values
* migrate lat/lon/gridsquare to uci format
* remove from sysupgrade kept files list
* Memory and cpu performance improvements
* Fix bandwidth reporting
* Discard large arrays once we're done with them
* Fixup whitespace
* Improve string constructions
* Use available mem
* Print the Remote Nodes as we go (can be big)
* Local variables
* Stop re-reading arp/mac files
* Reduce calls to system 'cat'
* Simply lat/lon read
* Only read route30 once
* Whitespace
* Make meshstatus limits configurable
* and => &&, or => ||
* gzip content if we can
fixes#155
* api: add RF IP for non-RF links
Add the RF IP address for non-RF linked devices. This allows the
services to be displayed for non-RF Current Neighbors.
* remove case manipulation
Update the alert banner background color to distinguish it from the
"supported hardware" messages. This makes it look more like a standard
sticky note.
Aliases in NAT mode allows the node admin to create alias names for hosts on the LAN and then use those for creating port forwarding rules. The aliases DO NOT effect the rest of the mesh network and are not propagated via OLSR.
NAT Mode aliases are only usable on the local LAN where the IP addresses are known and routable only on the subnet. Since the NAT hides these IP addresses or the node masquerades, other mesh nodes and devices by definition only know about the node’s hostname. Thus aliases on the LAN in NAT mode are not propagated by OLSR across the mesh. You _CANNOT_ use an alias name in a service listing.
You _will_ be able to set an alternate hostname for any host on the nodes' LAN however.
A host named `CBY45-DELLLAPTOP` can also be known as `wxc-shack-laptop`. It may make remembering which host is which a bit easier.
Since OLSR does not propagate the alias, the "Do Not Propagate" checkbox while in NAT Mode is hidden.
* enhancement: show the "non propagated" hosts as a grey color in the mesh list on the localnode.
This allows for the node admin to see, at a glance, which of the hosts are "hidden" or not.
* changed colors a little bit for the black background styles.
also assed in the aliases so now they will show up as a different color too.
this only effects the mesh listing on the localnode to where the aliases and/or non propagated hosts are.
the rest of the network does not see this.
* add a tooltip to the aliased/non propagated hostnames to help explain what they mean
Allows for aliased hostnames on the mesh. One IP/Host can be assigned to multiple hostnames.
This is useful for many things including virtual hosts, virtual machines, virtual email addresses, etc.
The possibilities are actually _endless_.
Fixes#516
Allows for the node admin to choose to have DHCP leased hostnames/IP's propagated over the rest of the mesh network or not.
Defaults to allowing the hostname/IP to propagate.
The hostname/IP will *still* be resolvable from the localnode and will show up in the list of hosts on the localnode only.
This allows for selected local mesh devices to be not available over the rest of the mesh network.
ie: switches, routers, cameras, etc.
This will work immediately for *new* DHCP leases when the checkbox is selected.
For *existing* DHCP leases, it may take a while for the network to update, if ever.
To speed up the process of full network OLSR "DNS" updating, reboot all the nearest neighbor device(s) to the node you made these changes to.
That seems to get the changes "out" to the rest of the network faster than normal.
Fixes#508
Change the Advanced Configuration warning banner: slightly wider to
distinguish from Alerts banner, add WARNING and make text color pure
white for contrast.
In the US, part 97 ham radio lower band edge is 5650.
Channel 131 @ 10MHz channel width is the lowest channel
setting that stays within allocation.
fixes#550
in the past nodes could be configured uniquely for
a given mode: ap, wifi client, mesh. Current behavior
in basic setup no longer has unique modes, rather wireless
cards can be configured in different modes in basic setup
and devices with multiple wireless interfaces can
be setup to use multiple modes at the same time.
fixes#533fixes#535
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
catch the tunnel comment field in perlfunc's read_post_data function where certain characters are changed to the html character entity in order to not interfere with the config files.
Tested with all kinds of crazy charcters such as: zdsfkh? <!@#$%^&*()> "quote"
Fixes#515
Specifications:
* SoC: Qualcomm Atheros AR9344 (560 MHz)
* RAM: 64MB
* Storage: 8 MB
* Wireless: 2.4GHz N based built into SoC 2x2
* Ethernet: 2x 100/10 Mbps, integrated into SoC, 24V POE IN
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
TP-Link CPE610-v2 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on Atheros AR9344
Specifications:
Based on the same underlying hardware as the TP-Link CPE510
Power, LAN0, WLAN green LEDs
23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector
Flashing instructions:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Signed-off-by: Andrew Cameron apcameron@softhome.net
* enhancement: added contact info/comment field for each tunnel connection.
Allows for a short comment or an email address so you can remember who to contact for each tunnel.
The field is optional and does not need to be filled out to get a tunnel connection up.
Also cleaned up some of the layout on the tunnel pages and hopefully made it a bit easier to tell what is what.
Fixes#457
* added `maxlength='50'` to the comment/contact field.
50 characters should be enough for an email address or a short comment.
* Allow for spaces in the Tunnel contact/comment field
This adds support for a popular low-cost 5GHz N based AP
Specifications:
- SoC: Atheros AR9344
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power
- Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Signed-off-by: Andrew Cameron <apcameron@softhome.net>
Tim Wilkinson