f3af8eee30
Tolerate missing frequency list ( #907 )
2023-07-21 13:59:15 -07:00
ef17d9bcd1
Allow SSH, WEB and TELNET access to be disabled on WAN (enabled by default) ( #903 )
2023-07-18 22:52:41 -07:00
f4321ff19b
Added support for group alert messages ( #890 )
...
* Added support for group alert messages
Signed-off-by: Gerard Hickey <hickey@kinetic-compute.com>
* Fixed category for AAM group names setting
Signed-off-by: Gerard Hickey <hickey@kinetic-compute.com>
* Revised aredn_message.sh to handle group messages better
Signed-off-by: Gerard Hickey <hickey@kinetic-compute.com>
---------
Signed-off-by: Gerard Hickey <hickey@kinetic-compute.com>
2023-07-08 22:09:02 -07:00
be9957183c
Lowercase the keys in radios.json ( #895 )
2023-07-08 22:04:23 -07:00
eaa5d2f72b
Allow & in service paths ( #889 )
2023-07-03 23:19:15 -07:00
bc0bd27bdd
RC: Day 1 fixes ( #885 )
...
* Dont compress the admin page so we handle upload timeouts more clearly
* Fix aredn.info.getFreq() so it always takes a radio and not an interface
2023-06-28 23:47:25 -07:00
0532afdbbf
Fix Mikrotik first install where the radios are not necessarily available. ( #882 )
2023-06-25 21:10:07 -05:00
adab218868
Fix x86 upgrades (naming is a little odd) ( #883 )
2023-06-25 21:09:19 -05:00
056b60bb4d
Use wifi assoc list when looking for unresponsive nodes. ( #881 )
...
The arp cache keeps wifi entries long past them being associated with
the node, so now use wifi assoc list to find nodes, and the arp cache
to get their IPs.
2023-06-24 23:37:48 -07:00
426abfacfd
Fix MTU failure which broken node-setup ( #878 )
2023-06-22 19:17:43 -05:00
15c78a4369
Allow MTU on wifi interface to be modified. ( #877 )
2023-06-21 23:07:21 -05:00
270d7fd5f1
Typo ( #876 )
2023-06-21 13:57:21 -07:00
7650b627e8
Minor wifi monitor improvements for better metrics reporting ( #875 )
2023-06-20 20:51:18 -07:00
8c4d9edd99
Merge all the station monitoring and mitigation into a single service. ( #874 )
...
This is an attempt to unify all the station monitoring and make it work
better as one. We're trying to square a circle here somewhat, with taking
steps to kick nodes when problems are detected, but not kick them too quickly
or often in case we're mis-identifing issues.
We've seen these issue manifest themselves which nodes messing VoIP services
as well as resets causing nodes to get into unrecoverable states when there
was no real problems in the first place.
This will probably need to evolve before the next release, but would be good
to get some milage on the new code.
2023-06-20 01:27:23 -07:00
52c7286a4c
Remove another coverage test which causes problems. ( #871 )
...
Coverage is handled by modifying firmware state, and the driver stores
the values the first time it is set. When we reset this state might be lost
so it will be reloaded from the firmware. We set the coverage back to 0
so the reloaded value will be the default again.
We also remove a check which can fail incorrectly.
2023-06-12 23:29:38 -07:00
8c4369e966
Remove subnet restrictions for xlinks ( #870 )
...
Xlink endpoints can now be arbitrary IP addresses
2023-06-11 23:20:24 -07:00
8f6e943237
Avoid fatal error if mac disappears across a radio reset ( #868 )
2023-06-08 21:27:37 -07:00
b64aa0c988
Monitor bug fixes ( #867 )
2023-06-07 22:42:42 -07:00
8287742822
Fix bug when editing xlinks on single port devices ( #866 )
2023-06-06 21:54:08 -07:00
da7b894c39
Support xlinks on x86 ( #865 )
2023-06-06 00:38:45 -07:00
644b6579a5
New LiteBeam AC Gen2 variant ( #864 )
2023-06-04 21:31:53 -07:00
26742bbd83
Fix 'has_wifi' detection. ( #863 )
...
/sys/kernel/debug/ieee80211 can exist without entries sometimes
2023-06-04 17:24:28 -07:00
935dc2c063
Handle non-wifi devices passed to maxpower/pwroffset functions
2023-06-03 15:45:00 -07:00
60a2627989
More multi-radio support ( #860 )
...
* Multi-radio: Support different powers for different radios
* Use arrays for powers
* Update APIs to take wifi interface
2023-06-02 18:47:34 -07:00
225773cf06
Fix lua converting empty port object to empty array. ( #858 )
...
Lua confuses empty objects and empty arrays when converting to JSON.
2023-06-01 18:47:50 -07:00
a61dfcdafe
Alternate ath9k and ath10k radio reset for deaf nodes ( #857 )
...
* A scan, especially if we have to do both active and passive, essentially mutes
the radio to AREDN traffic for 10-20 seconds, which isn't good. If the radio is completely
deaf then it doesn't matter, but particularly on the 9K radios we do this when
things are looking a bit dodgy, though not deaf.
* Provide hook to reset ath9k from userspace. This hook is attributed to:
Linus Lüssing <ll@simonwunderlich.de>
* User /sys reset hooks rather than iw scan
2023-06-01 17:06:39 -07:00
0890ab210f
Fix API nil pointer when mac lookup fails ( #855 )
2023-05-29 21:12:37 -07:00
df77276075
Disable WAN access to node by default. ( #854 )
2023-05-29 11:22:09 -05:00
ab541c3d35
Fix disabled mesh on multi-wifi devices ( #852 )
2023-05-27 17:58:10 -07:00
4e621baf0b
Support switching mesh radio on multi-radio devices ( #847 )
2023-05-25 21:27:59 -07:00
62a19a239e
Support for Mikrotik LDF 5AC ( #841 )
2023-05-17 20:52:51 -07:00
65dab4cda1
UI improvements from Steve ( #843 )
2023-05-17 17:49:04 -07:00
f9b032aca1
Advanced networking tab ( #834 )
...
* Advanced networking tab
* Add page protection
* Disable WAN VLAN option in advanced config when advanced networking available
2023-05-16 21:29:20 -05:00
f00966531d
PowerBaam 5ac-620 support ( #840 )
2023-05-15 14:10:05 -07:00
3fa247bc86
LDF2 support ( #828 )
2023-05-09 00:22:41 -07:00
eb90661eac
Fix wifi setup for multi-radio devices ( #827 )
...
Disable/enabling mesh wifi on multi-radio devices could confuse the
allocation of the radios to specific tasks
2023-05-08 22:31:10 -07:00
a5725ee55e
Add missing radios.json for Powerbeam 5AC 400 ( #826 )
...
* Add missing radios.json for Powerbeam 5AC 400
* Supported in nightly
2023-05-07 10:35:35 -07:00
c991ea4ea1
Feedback when pressing upload/download buttons ( #819 )
2023-05-03 19:22:30 -05:00
8f572af4c7
Fix upgrade typo ( #818 )
2023-05-03 19:21:52 -05:00
e6f29214f2
Fix channel display for 5GHz nodes ( #811 )
2023-04-29 00:10:59 -07:00
3863207c5a
Virtualized X86 support ( #807 ) - 4/28/2023
...
* x86 configs
* Update for new update system
* Build support
* Handle nowifi on status page
2023-04-28 11:01:58 -07:00
794d6caa89
Tidy up the formatting and fix column widths ( #809 )
2023-04-27 22:12:57 -05:00
deeacc2cc2
Restructure, modularize and tidy the navigation buttons and menus ( #805 )
...
* Make admin and user bar menus pluggable
* Realign header block to stop is moving around
* Remove ref
* Use modular nav to disable ineligable options during initial install
* Dont offer tunnel menus options when no tunnel daemon installed.
This is for low-memory devices
* Simplify
* Improve messaging when running ram image
* Disable rather than hide vpn menu items on tiny memory devices
* Move menu navs
2023-04-25 20:07:19 -07:00
be969b1e63
Fix frequency range reporting and display for 900MHz devices ( #803 )
2023-04-23 20:00:53 -05:00
8711afa9ca
Remove hardwired frequency tables and use information from the hardware ( #801 )
...
* Remove hard coded channel tables
* Reduce radios.json to only what's needed
* Update radios
* Improve unsupported device handling
2023-04-22 03:24:20 -10:00
291ba2d012
Prometheus Metrics ( #797 )
...
* Basic memory, filesystem, cpu and networking
* Split metrics out
* Run hourly metrics tasks if people are actively gathering metrics
* Hourly metrics
* Add LQM metrics
* Fixes
* OLSR link info
* Improve error handling
* Basic node details
* Add bitrates and ping times
* Remove periodic tasks
* Migrate metrics to package
* Metrics config file
2023-04-20 18:34:52 -07:00
697d6c6d42
Fix TP-Link CPE210 v3 capitalization ( #792 )
2023-04-17 20:38:27 -05:00
e5a0b43480
Fix occasional nil error
2023-04-11 00:38:35 -07:00
cc78b0c4a7
Mikrotik SXT Lite2 support
2023-04-10 10:25:29 -07:00
922949abc0
Eliminate false network rejoins using LQM information ( #781 )
...
* Use LQM information to filter out neighbors we dont care about.
These can cause false rejoin events and degrade the network.
* Only use active station monitor with LQM info.
2023-04-10 10:21:30 -07:00
Tim Wilkinson