Commit Graph

108 Commits

Author SHA1 Message Date
Darryl Quinn 24ccfb30bc feature: save location data from admin page 2015-12-07 15:24:39 -06:00
Conrad Lara - KG6JEI dabd9a4fbc bugfix: 802.11n devices did not use 802.11n datarates
This adds support for 802.11n data rates on the mesh.

This should improve dataspeeds across the board

MIMO devices like Rocket and NanoStation should be able to use dual chains which allows diverse data transmission on each chain increasing throughput

MCS data rates in theory should cut through noise better than legacy modulation and have higher speeds on each step which should allow overall higher datarate between nodes.
2015-11-15 19:50:54 -08:00
Conrad Lara - KG6JEI 48cb37bd05 Merge branch 'release-3.15.1.0' into develop
Merging in latest release-3.15.1.0 changes into develop to provide a foundation with recent release fixes for the develop branch.

This should be 3.15.1.0b03 code.

Conflicts:
	files/etc/crontabs/root
	files/usr/local/bin/wscan
	files/www/cgi-bin/sysinfo.json
2015-11-15 19:28:56 -08:00
AE6XE 8cd8e07885 bugfix: deaf chain workaround 2015-11-01 18:33:05 -08:00
Conrad Lara - KG6JEI af97ce3f49 bugfix: "Disable default route" not kept during OTA upgrade. 2015-07-28 08:49:48 -07:00
Darryl Quinn 3ae86c67ec feature: signal charts 2015-07-26 23:09:34 -05:00
Conrad Lara - KG6JEI 2511f585f0 bugfix: Should not keep /etc/config/* on sysupgrade
We don't really need any files in there,  and keeping the folder can interfere with the programs that populate /etc/aredn_include on firstboot from uci-default.

This will cause the node to boot up in default mode (with an AP on its interface on the default channels) during its first boot, and than very quickly reboot and come up under the mesh.
2015-07-23 11:35:54 -07:00
Conrad Lara - KG6JEI cc74123ad3 bugfix: vtund was missing from arednsysupgrad.conf 2015-07-10 18:56:30 -07:00
Conrad Lara - KG6JEI 442b7e9822 bugfix:
Make sure httpd.conf is up to date on first boot.
2015-07-09 16:10:50 -07:00
Conrad Lara - KG6JEI d7be9104d9 bugfix: We need to only pull a small selection of files over through sysupgrade instead of all config files.
opkg config can cause issues on OS upgrade among others.

ref AREDN->ticket:131
2015-07-09 09:25:00 -07:00
Conrad Lara - KG6JEI 8975c46c67 bugfix: TPLink and similar, fix port_map led mapping 2015-07-02 20:30:27 -07:00
Conrad Lara - KG6JEI 6b404c27ff bugfix: move set eth mac fixup to /etc/init.d/local
Not getting much debug information at moment, would like to put this in uci-defaults but with issues that I can't seem to log at moment (and not having serial cable for this device) I'm going with lets put it in /etc/init.d/local before nvram and similar gets set.

ref AREDN->ticket:115
2015-07-02 19:03:47 -07:00
Conrad Lara - KG6JEI 2482af260c bugfix: re-work the mac change code.
Old code would set mac on the sub-vlan not the master interface which could cause issues.

Rework to be more functional in the future and to work correctly on vlan interfaces.

ref AREDN->ticket:115
2015-07-01 23:03:01 -07:00
Conrad Lara - KG6JEI 794c00c7c6 bugfix: "wifi" network isn't yet defined during firstboot so hard code interface names to eth0 and wlan0
ref AREDN->ticket:115
2015-06-30 22:17:45 -07:00
Conrad Lara - KG6JEI 7985ff6ba3 bugfix: deal with duplicate MAC on LAN and WIFI
ref AREDN->ticket:115
2015-06-29 22:58:08 -07:00
Darryl Quinn 8da9756817 bugfix: removed debugging statements 2015-06-17 22:43:20 -05:00
Darryl Quinn 3d7893fd46 Revert "Revert "fixes AREDN->125""
This reverts commit d917b5b2ec.
2015-06-17 00:40:34 -05:00
Darryl Quinn d917b5b2ec Revert "fixes AREDN->125"
This reverts commit 7a05f76c93.
2015-06-17 00:39:07 -05:00
Darryl Quinn 7a05f76c93 fixes AREDN->125 2015-06-17 00:38:13 -05:00
Darryl Quinn 807f381a04 bugfix: network and firewall tunnel rules reworked 2015-06-14 23:30:06 -05:00
Darryl Quinn 5dc1d0fa02 Revert "bugfix: missing include in firewall config"
This reverts commit 05839715f6.
2015-06-14 22:28:47 -05:00
Darryl Quinn 05839715f6 bugfix: missing include in firewall config 2015-06-11 01:21:30 -05:00
Darryl Quinn 91762973a5 bugfix: tunnel firewall changes 2015-06-11 01:02:55 -05:00
Darryl Quinn 81ac8b7fbe bugfix: losing network interfaces after node-setup 2015-06-11 00:40:14 -05:00
Conrad Lara - KG6JEI 1f2737f0f3 bugfix: tunnels: Unable to route to connections across tunnel
Firewall rules don't get called because vtund is at /usr/sbin/vtund not /usr/bin/vtund

Also make the check if line posix compatible while we are chaning the path to be sure it works in the future too.
2015-05-25 23:04:34 -07:00
Conrad Lara - KG6JEI 3850cbac53 tunnels: Tunnels should only start when in mesh mode
Tunnels are not supported in other modes as such we should only let them start in mesh mode.
2015-05-24 12:59:11 -07:00
Conrad Lara - KG6JEI 5cc53dec88 tunnels: Set tunnel init.d scripts to be executable
Remove the chmod step inside of setup.

Came across one time where this didn't trigger.

In addition this saves us from using additional storage space on the node as a +x creates a duplicate file.
2015-05-24 12:30:23 -07:00
Conrad Lara - KG6JEI 06a46e4d2a bugfix: Radio0Path is unknonw WIFI doesn't start.
wifi detect  is called in /etc/init.d/boot before uci_apply_defaults is called.

Because of this if we don't have the data about the radio0path we need to remove the wifi config file first before calling wifi detect.
2015-05-16 11:32:29 -07:00
Conrad Lara - KG6JEI e69f1e98ba bugfix: Move aredn_include setup to uci-defaults and fix radio0path upgrade flaw
Needs to be in uci-defaults to be sure these data sets execute BEFORE the OS boots

We also need to get radio0 path because its mandatory for wifi to work.

Needed for sysupgrade from 3.0.2 to latest version.
2015-05-15 22:54:16 -07:00
Conrad Lara - KG6JEI dff687eed7 Merge branch 'DefaultChannel' into develop
Allows nodes to default to a common channel that is in the most common bandplan space for Part 97 usage.

Local cordination is still needed by users to make sure the channel matches the local deployment.

Defaults are as follows:

Band   : Channel Freq : Bandwidth
900    : 912MHz       : 5MHz
2400   : 1 2412MHz    : 20MHz
3400   : 3420MHz      : 5MHz
5800   : 149 5745MHz  : 5MHz

2.4GHz keeps channel 1 at 20MHz because it is the standard deployment.
All other bands are still 'new' and no standard exist so we are creating one.

5MHz chosen because it better fits the emcomm goal. Smaller width should be stronger allowing for better networks.

Local networks can change as they see fit.
2015-05-13 22:02:08 -07:00
Conrad Lara - KG6JEI 8761ffc3b8 feature: default rf channel : Remove setting RF channel on first boot.
Remove setting RF channel on first boot in uci-defaults.

This should allow the node to use standard wifi channels when it boots allowing mesh setup to be run from a laptop or mobile device.

We will later move them to a real mesh channel during the mesh setup page.

Should also resolv issue where nodes were booting up on channel -2 and similar and wifi would refuse to start due to regdomain.
2015-05-13 21:50:32 -07:00
Darryl Quinn 1ffa2b69a4 bugfix: tunnel: hot plug monitoring wrong interface name to trigger fw scripts 2015-05-12 19:24:06 -05:00
Conrad Lara - KG6JEI dcb4994cda bugfix: tunnels: Tunnels fail to start after saving.
etc/init.d/vtund needs to be +x
2015-05-10 14:39:03 -07:00
Conrad Lara - KG6JEI 27bf54f2dc Merge branch 'SupportTool' into develop
Add new feature for support information to admin interface

Conflicts:
	files/etc/httpd.conf
2015-05-08 20:03:22 -07:00
Conrad Lara - KG6JEI 8299862b57 feature: support tool: Restrict Access
Restrict access to support tool to logged in admin user
2015-05-08 19:55:09 -07:00
Darryl Quinn 5afde21c9f bugfix: secured vpn and vpnc pages 2015-05-07 22:41:06 -05:00
Darryl Quinn defd944fc1 changed graphics: https://www.iconfinder.com/icons/183208/bin_can_garbage_trash_icon#size=20 (Free for commercial use) 2015-04-28 22:37:33 -07:00
Darryl Quinn 5d6ba0c244 fix client options and disconnect graphic 2015-04-26 23:21:42 -05:00
Darryl Quinn a43ef2827b feature: improved stop methods for client and server. added IPs to uci config 2015-04-20 23:53:57 -05:00
Darryl Quinn dec3eeeb47 Merge commit '88037845309b311901a590ca2a2b91adbd79bfc0' into tunnel_mainline 2015-04-15 21:09:32 -05:00
Darryl Quinn 7371373235 feature: client and server fixes. calculate IP's for dest/gateway 2015-04-15 17:39:45 -05:00
Conrad Lara - KG6JEI 94a803d456 feature: Add initial read-only SNMP support in mesh mode.
Config file is present upon initial start and in mesh mode.

Daemon still starts up in other modes but will not function w/o settings.

Firewall:
Permit access for UDP:161 (SNMPD) on  WIFI and DTDLINK
Lan is permitted by default allow rules.
2015-04-14 22:31:21 -07:00
Darryl Quinn cf1ddb900b bugfix: network/start now resets to default, added icons for pages 2015-04-09 10:14:04 -05:00
Darryl Quinn c40a42562f feature: implement vtundsrv startup script. make 13-vtun vtund aware 2015-04-08 00:15:36 -05:00
Darryl Quinn eeebc9ac09 Merge branch 'develop' into tunnel_mainline 2015-04-07 10:59:06 -05:00
Conrad Lara - KG6JEI 908626336f bugfix: Configuration NOT Saved? Can't open '/etc/ared_include/system_netled'
File wasn't created on boot due to a missing space in if statment.

In addition other services would not start.
2015-04-07 08:51:32 -07:00
Darryl Quinn e6d08f5606 merged from develop 2015-04-07 10:36:42 -05:00
Conrad Lara - KG6JEI e7c3cdc909 bugfix: CPE510: Network activity led's broke after config save
Save the port mapping for link_lan led's for use in the system file so that the link led's will work after save and reboot
2015-04-06 21:03:13 -07:00
Conrad Lara - KG6JEI 6e74aaf0f4 bugfix: CPE510: networking does not function after initial config save
After saving the config the lack of the root level switch entry which enables vlans and resets the switch causes the network to shutdown.
2015-04-06 10:44:05 -07:00
Conrad Lara - KG6JEI 3c07872f06 bugfix: Make sure we create the swconfig file even if it will end up empty.
If we don't create the file the system will have nothing to include later on and the script will run on every boot
2015-04-05 23:05:42 -07:00