Commit Graph

80 Commits

Author SHA1 Message Date
Conrad Lara - KG6JEI ae2bc531b2 hardware: board add: Rocket M5 with USB Port
board.info
{{{
board.sysid=0xe105
board.cpurevision=0x000000c2
board.name=Rocket M5
board.shortname=R5N
board.subtype=
board.netmodes=7
board.hwaddr=00156DDC9D53
board.reboot=30
board.upgrade=150
board.phycount=1
board.phy.1.maxmtu=1524
board.phy.2.maxmtu=1524
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe105
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.offset=5
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=0
}}}
2015-07-23 21:24:21 -07:00
Conrad Lara - KG6JEI 108e05088b bugfix: Add max power level tracking control for per channel power on devices
Mainly relates to TP-Link devices which have a roving power level programmed into the hardware.

The datasheets for the hardware may say higher power but the chip has been programmed to not go above these values.
2015-07-20 23:30:49 -07:00
Conrad Lara - KG6JEI 9b30e157bc bugfix: Set max power for device to TPLink programed "max power"
This is the absolute maximum that can be used by the device from TPLink eprom programming.

The value actually goes down on some frequencies.
2015-07-20 21:38:01 -07:00
Conrad Lara - KG6JEI 8eabf6ad00 bugfix: snr setting was setting SignalLevel instead of NoiseLevel
ref AREDN->ticket:129
2015-07-02 22:43:01 -07:00
Conrad Lara - KG6JEI c4c808f98c Merge branch 'FixupRefDMZLed' into release-3.15.1.0
Remove references to DMZ led and replace with "Status 4" led
2015-07-01 23:25:56 -07:00
Conrad Lara - KG6JEI a46bbf27d8 bugfix: sometimes iw doesn't show noise floor
Pull from kernel debug instead for now untill we can work around it in iw.

fixes AREDN->ticket:129
2015-07-01 10:05:58 -07:00
Conrad Lara - KG6JEI 13db1b02a2 bugfix: Remove ref to DMZ Led on first node reboot 2015-06-30 08:36:45 -07:00
Conrad Lara - KG6JEI 39729157c6 bugfix: Signal levels do not show up on "new extended" RF Channels
Switch to iw over iwinfo because it handles the new channels better.

Partially reverts changeset:808a8d5019fce4a7ca2c027ea7838d43c6d8cad0/aredn_ar71xx

fixes AREDN->ticket:129
2015-06-30 00:05:45 -07:00
Conrad Lara - KG6JEI f915225459 bugfix: Add in-testing support for older NanoStation M5 XW boards
board.info provided by VE3KMV
{{{
board.sysid=0xe005
board.cpurevision=0x000000c2
board.name=NanoStation M5
board.shortname=N5N
board.subtype=
board.netmodes=7
board.hwaddr=00272232336C
board.reboot=30
board.upgrade=150
board.phycount=2
board.phy.1.maxmtu=1524
board.phy.2.maxmtu=1524
radio.1.name=
radio.1.shortname=
radio.1.bus=pci
radio.1.subsystemid=0xe005
radio.1.subvendorid=0x0777
radio.1.txpower.max=27
radio.1.txpower.offset=5
radio.1.antennas=1
radio.1.def_antenna=4
radio.1.antenna.1.id=4
radio.1.antenna.1.name=Combined
radio.1.antenna.1.gain=16
}}}
2015-06-21 19:24:43 -07:00
Conrad Lara - KG6JEI 21edf5fa02 bugfix:Let kernel handle antenna selection: Remove antenna name mapping data. 2015-06-18 20:18:03 -07:00
Conrad Lara - KG6JEI ea9dfc5d1a bugfix: Let kernel handle antennas:Remove sub functions wifi_validant and wifi_defaultant 2015-06-18 20:15:47 -07:00
Conrad Lara - KG6JEI 1b68255c7f hardware: NanoStation M3: Set NanoStation M3 to "in testing"
25dbm max power, with 3dbm offchip amplifier.

ref AREDN->ticket:53
2015-05-21 10:51:58 -07:00
Conrad Lara - KG6JEI 42ee986cd3 bugfix: Untill user visit status page theme is not set.
Move default theme selection to html_header() to solve theme not being set.
2015-05-14 11:36:51 -07:00
Conrad Lara - KG6JEI d59709d840 bugfix: Theme reverts to no-theme when status page reset button is pressed.
A symlink loop occurs because the default theme selector links back to itself.

Removing the value= on the select title entry prevents this.
2015-05-14 10:56:41 -07:00
Darryl Quinn c26b5fd992 Merge branch 'tunnel_mainline' into develop 2015-05-07 19:25:14 -05:00
Conrad Lara - KG6JEI bd3de68231 ar71xx: hardware: NanoBeam-M5-19 Add testing support
Add NanoBeam M5 19 in testing support
2015-05-05 16:29:53 -07:00
Conrad Lara - KG6JEI 2af1e3e0c3 ar71xx: Copy get_model to get_boardid and modify to return a boardid
When model exiss that has a boardid in EEPROM it will return from there, otherwise it returns the model as chosen by ar71xx
2015-05-05 16:18:24 -07:00
Darryl Quinn 7327c2de51 Merge branch 'develop' into tunnel_mainline 2015-04-23 23:00:00 -05:00
Conrad Lara - KG6JEI 9840db43de hardware: Add CPE210 in testing support 2015-04-22 11:31:23 -07:00
Conrad Lara - KG6JEI 14ddd34906 Merge branch 'RocketM3' into develop
RocketM3 will remain in untested status until we get spectrum report.

ref AREDN->ticket:53
2015-04-22 00:06:43 -07:00
Darryl Quinn 344992b096 Merge commit '714a3d6f5404bcd650019bd59e92d2cc2bb54164' into develop 2015-04-17 18:50:53 -05:00
Darryl Quinn ff057d3488 bugfix: change navbar spacing to accomodate tunnels 2015-04-08 19:59:39 -05:00
Darryl Quinn c40a42562f feature: implement vtundsrv startup script. make 13-vtun vtund aware 2015-04-08 00:15:36 -05:00
Conrad Lara - KG6JEI 82611bb57e bugfix: NanoStation M5 XW device config was malformed
ref AREDN->ticket:43
2015-04-07 22:11:56 -07:00
Darryl Quinn 54210a2d7e Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into tunnel_mainline 2015-04-07 23:09:29 -05:00
Conrad Lara - KG6JEI 853430dbdf hardware: Add testing support for NanoStation M5 XW
ref: AREDN->ticket:43
2015-04-07 20:37:58 -07:00
Darryl Quinn e6d08f5606 merged from develop 2015-04-07 10:36:42 -05:00
Darryl Quinn 928e7e720a Merge branch 'develop' of ssh://git.aredn.org/aredn_ar71xx into dyn_css 2015-04-06 23:20:12 -05:00
Conrad Lara - KG6JEI f6f3aaef9e Merge branch 'TPLinkCPE' into develop 2015-04-06 21:14:39 -07:00
Darryl Quinn 09af80b17e check for .css file extension being passed 2015-04-06 14:47:09 -05:00
Darryl Quinn b8dcc50fb9 changed help text 2015-04-06 09:43:05 -05:00
Conrad Lara - KG6JEI 63bb07b617 hardware: CPE510: Add initial hardware support for TPLink CPE510 in testing
Testing mode for CPE510

Offset needs to be looked into, OS reports a max power of 23dbm need to see if this is kernel, or offset related.

Should provide enough details for the board to be registered in the UI
2015-04-05 22:16:24 -07:00
Conrad Lara - KG6JEI 7c152d7c1e hardware: Expand board_id routine to allow TPLink devices to be obtained
When a device does not have a subsystem device ID we will fall back to the board_detect routine.

In the case of a TPLink CPE510 the model will be along the lines of "TP-Link CPE510 v1.0"

In the case of TPLink CPE510 this also includes a hardware version so should the hardware be changed in the future we will be able to key off that as well.
2015-04-05 22:07:47 -07:00
Darryl Quinn df0bc42208 feature: converted css to use symlinks and multiple files 2015-04-05 21:19:32 -05:00
Darryl Quinn 6672996cd3 added ability to have multiple css files 2015-04-04 23:49:31 -05:00
Darryl Quinn b074fd6985 consolidated functions to reduce duplication (save space) 2015-04-01 17:26:52 -05:00
Darryl Quinn 2461d4acd8 add vpn and vpnc pages to UI menu 2015-04-01 17:09:18 -05:00
Conrad Lara - KG6JEI 5414cb2f86 bugfix: Correct bandmapping to 3400 for Rocket M3 2015-03-31 23:50:05 -07:00
Conrad Lara - KG6JEI 6c91ec0ab4 Add channels that are within normal 5.8GHz unit range for Rocket M3 usage.
M3 is a 5.8GHz unit with a 2GHz offset transverter.

5MHz width is recomended on these channels.

Send to spectrum analysis for verification that output looks clean.

Stepping stone to working on the wider width of the full 3.4GHz band which has more channels but unlike channels 95-100 (added in this commit) the rest are outside the normal 5.8GHz cal range (but are between two cal points so may be fine)
2015-03-31 23:42:22 -07:00
Conrad Lara - KG6JEI 16576d7bde bugfix: dtdlink is by default on eth0.2 not eth0.1 2015-03-26 16:47:33 -07:00
Conrad Lara - KG6JEI 0d11af70b9 bugfix: Unknown interfaces wouldn't return default interface. 2015-03-26 01:31:50 -07:00
Conrad Lara - KG6JEI 9444716fbd feature: Add function and code to UI code to prepare for changing interface names in the core OS.
Create get_interface which will lookup in the current uci network config the realname for the logical interface name.

When the interface is not found it will fall back to a hard coded list.

Configure the UI to use the new get_interface function.
2015-03-24 23:25:18 -07:00
Conrad Lara - KG6JEI e146193b65 Rerand from BBHN to AREDN(TM)
Since a large number of the  BBHNDev team has decided to create firmware fully independent of the BBHN Project the decision has been made to rebrand the firmware to differentiate from the origional BBHN work.

We would like to thank all those whom have worked on the BBHN firmware over the years and all those who continue to work on the firmware under AREDN(TM).
2015-03-09 16:39:04 -07:00
Conrad Lara - KG6JEI 5c3ee1d068 bugfix: Add GPLv3 license text to core BBHN Mesh files
Program went GPLv3 last year but license text was never added to files

Default text to give credit to David as he is listed in all commits and to reference the BBHN Austin team at the same time as they were part of the group of HAM's that started this project.
2015-01-18 11:36:49 -08:00
Conrad Lara - KG6JEI 917573cf95 hardware:bugfix: AirGrid M2 0x212 remove power offset to facilitate testing
Removing the offset and increasing max power so we have full range avaliable to us.

This may not help us figure out the offset but will allow us a wider range of options.

ref BBHN->ticket:71
2014-12-14 10:54:05 -08:00
Conrad Lara - KG6JEI b7dcfdd9ce hardware🆕 Add testing support for AirGrid M2 0xe212
Reported information and board information do not appear to line up, device will need further testing to verify actual details.

Max Power and Power Offset are of concern.

ref BBHN->ticket:71
2014-12-14 10:37:48 -08:00
Conrad Lara - KG6JEI d5af5c97cf support status: Mark Rocket M9 as supported. 2014-11-03 20:26:47 -08:00
Conrad Lara - KG6JEI 5a39316a7e hardware: support: Loco M9, NanoBridge M9 test: RocketM9
tag NanoStation Loco M9 and NanoBridge M9 into supported status

begin testing Rocket M9 support

ref BBHN->ticket:66
fixes BBHN->ticket:51
2014-10-20 19:45:46 -07:00
Conrad Lara - KG6JEI 32a67e1b2c Add initial testing support for M9 devices
ref BBHN->ticket:51
2014-07-14 23:01:16 -07:00
Conrad Lara - KG6JEI 88d532a3a1 bugfix: get_default_gw needs to follow the route the node will use to internet.
because of previous bugfix the function needs to check table 31 and 254 (with 254 taking priority)
2014-07-08 00:02:47 -07:00